summaryrefslogtreecommitdiffstats
path: root/arch/arm (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx25: consolidate properties of usbhost1 in dtsi fileMichael Grzeschik2019-12-093-4/+2
| | | | | | | | | | | The usb port represented by &usbhost1 uses an USB phy internal to the SoC. We add the phy_type to the base dtsi so the board dts only have to overwrite it if they use a different configuration. While at it we also pin the usbhost port to host mode. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: e60k02: Pass the memory unit addressFabio Estevam2019-12-091-1/+2
| | | | | | | | | | | | | | | | The following build warning is seen with W=1: DTC arch/arm/boot/dts/imx6sll-kobo-clarahd.dtb arch/arm/boot/dts/e60k02.dtsi:51.9-53.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Pass the memory unit address to fix the problem. While at it, also pass 'device_type = "memory"', which is recommended for memory nodes. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: add devicetree entry for Tolino Shine 3Andreas Kemnade2019-12-092-0/+327
| | | | | | | | | | The device is almost identical to the Kobo Clara HD. The only spotted difference is the SoC. It contains an imx6sl instead of an imx6sll. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx7d-sdb-reva: Add revision in board compatible stringAnson Huang2019-12-091-0/+3
| | | | | | | | i.MX7D SDB Rev-A board should use its own board compatible string instead of default i.MX7D SDB board. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sx-sdb-reva: Add revision in board compatible stringAnson Huang2019-12-091-0/+1
| | | | | | | | i.MX6SX SDB Rev-A board should use its own board compatible string instead of default i.MX6SX SDB board. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6q-logicpd: Enable ili2117a TouchscreenAdam Ford2019-12-091-0/+10
| | | | | | | | | | The LCD used with the imx6q-logicpd board has an integrated ili2117a touch controller connected to i2c1. This patch adds the node to enable this feature. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2019-12-073-5/+12
|\ | | | | | | | | | | | | | | | | | | | | | | Pull ARM fixes from Russell King: - fix CPU topology setup for SCHED_MC case - fix VDSO regression * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC
| * ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCTVincenzo Frascino2019-12-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __arch_get_hw_counter() should check clock_mode to see if it can access CNTVCT. With the conversion to unified vDSO this check has been left out. This causes on imx v6 and v7 (imx_v6_v7_defconfig) and other platforms to hang at boot during the execution of the init process as per below: [ 19.976852] Run /sbin/init as init process [ 20.044931] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Fix the problem verifying that clock_mode is set coherently before accessing CNTVCT. Investigated-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
| * ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MCDietmar Eggemann2019-12-062-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ca74b316df96 ("arm: Use common cpu_topology structure and functions.") changed cpu_coregroup_mask() from the ARM32 specific implementation in arch/arm/include/asm/topology.h to the one shared with ARM64 and RISCV in drivers/base/arch_topology.c. Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug: ERROR: groups don't span domain->span It happens to CPUs of the cluster of the CPU which gets hot-plugged out on scheduler domain MC. Turns out that the shared cpu_coregroup_mask() requires that the hot-plugged CPU is removed from the core_sibling mask via remove_cpu_topology(). Otherwise the 'is core_sibling subset of cpumask_of_node()' doesn't work. In this case the task scheduler has to deal with cpumask_of_node instead of core_sibling which is wrong on scheduler domain MC. e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4 ^ should be: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4 Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the topology masks in case of a CPU hotplug out operation. At the same time tweak store_cpu_topology() slightly so it will call update_siblings_masks() in case of CPU hotplug in operation via secondary_start_kernel()->smp_store_cpu_info(). This aligns the ARM32 implementation with the ARM64 one. Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is necessary since some Arm32 defconfigs (aspeed_g5_defconfig, milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit # CONFIG_ARM_CPU_TOPOLOGY is not set w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* | Merge tag 'arm-soc/for-5.5/devicetree-part2' of ↵Olof Johansson2019-12-062-0/+63
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://github.com/Broadcom/stblinux into arm/fixes This pull request contains the second batch of changes for Broadcom ARM-based SoCs, please pull the following: - Nicolas declares a CMA area within the first 1GB of DRAM in order for it to be guaranteed to reside there, otherwise ARM64's memory initialization will pick up a CMA area within ZONE_DMA32 - Stefan adds the Device Tree node for the built-in Ethernet controller (GENET) on the Raspberry Pi 4 model B board * tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711-rpi-4: Enable GENET support ARM: dts: bcm2711: force CMA into first GB of memory Link: https://lore.kernel.org/r/20191118182931.11884-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: dts: bcm2711-rpi-4: Enable GENET supportStefan Wahren2019-11-142-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the Gigabit Ethernet support on the Raspberry Pi 4. The defined PHY mode is equivalent to the default register settings in the downstream tree. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| * | ARM: dts: bcm2711: force CMA into first GB of memoryNicolas Saenz Julienne2019-11-141-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm64 places the CMA in ZONE_DMA32, which is not good enough for the Raspberry Pi 4 since it contains peripherals that can only address the first GB of memory. Explicitly place the CMA into that area. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* | | Merge tag 'socfpga_update_for_v5.5' of ↵Olof Johansson2019-12-061-6/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA updates for v5.5 - Issue COLD reboot by default for SoCFPGA platforms * tag 'socfpga_update_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm: socfpga: execute cold reboot by default Link: https://lore.kernel.org/r/20191122182106.822-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | arm: socfpga: execute cold reboot by defaultSimon Goldschmidt2019-11-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes system reboot for socfpga to issue a cold reboot by default instead of a warm reboot. Warm reboot can still be used by setting reboot_mode to REBOOT_WARM (e.g. via kernel command line 'reboot='), but this patch ensures cold reboot is issued for both REBOOT_COLD and REBOOT_HARD. Also, cold reboot is more fail safe than warm reboot has some issues at least fo CSEL=0 and BSEL=qspi, where the boot rom does not set the qspi clock to a valid range. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | | | Merge tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of ↵Olof Johansson2019-12-068-10/+20
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Device tree fixes for omap variants for for v5.5 merge window This series of changes contains fixes for few SoC and board specific issues that would be good to have merged for v5.5-rc1: - Fix incorrect MMC card detection polarity for omap3-tao3530 - Fix wrong am57xx-beagle-x15 pinmux named states for eMMC - Fix dra7 cpsw mdio clock that causes wrong speed - Fix vcsi for droid4 so it won't get turned off after init - Fix rev and sysconfig register offsets for omap4 sgx so it can idle Then there are also two minor late changes to logicpd-torpedo-baseboard to configure 1-wire HDQ for battery stats, and remove out of date workaround comments no longer needed. * tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix sgx sysconfig register for omap4 ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs ARM: dts: dra7: fix cpsw mdio fck clock ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments ARM: dts: logicpd-torpedo-baseboard: Enable HDQ Link: https://lore.kernel.org/r/pull-1574870758-237468@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | ARM: dts: Fix sgx sysconfig register for omap4Tony Lindgren2019-11-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like we've had the sgx sysconfig register and revision register always wrong for omap4, including the old platform data. Let's fix the offsets to what the TRM says. Otherwise the sgx module may never idle depending on the state of the real sysconfig register. Fixes: d23a163ebe5a ("ARM: dts: Add nodes for missing omap4 interconnect target modules") Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangsTony Lindgren2019-11-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to using vcsi regulator for the display, looks like droid4 is using vcsi regulator to trigger off mode internally with the PMIC firmware when the SoC enters deeper idle states. This is configured in the Motorola Mapphone Linux kernel sources as "zerov_regulator". As we currently don't support off mode during idle for omap4, we must prevent vcsi from being disabled when the display is blanked to prevent the PMIC change to off mode. Otherwise the device will hang on entering idle when the display is blanked. Before commit 089b3f61ecfc ("regulator: core: Let boot-on regulators be powered off"), the boot-on regulators never got disabled like they should and vcsi did not get turned off on idle. Let's fix the issue by setting vcsi to always-on for now. Later on we may want to claim the vcsi regulator also in the PM code if needed. Fixes: 089b3f61ecfc ("regulator: core: Let boot-on regulators be powered off") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: dts: dra7: fix cpsw mdio fck clockGrygorii Strashko2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRA7 CPSW MDIO functional clock (gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0) is specified incorrectly, which is caused incorrect MDIO bus clock configuration MDCLK. The correct CPSW MDIO functional clock is gmac_main_clk (125MHz), which is the same as CPSW fck. Hence fix it. Fixes: 1faa415c9c6e ("ARM: dts: Add fck for cpsw mdio for omap variants") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3vFaiz Abbas2019-11-202-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | am57xx-beagle-x15 revb1 and revc have 3.3V connected to the eMMC I/O lines. Update the pinmux name to reflect this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarityJarkko Nikula2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MMC card detection GPIO polarity is active low on TAO3530, like in many other similar boards. Now the card is not detected and it is unable to mount rootfs from an SD card. Fix this by using the correct polarity. This incorrect polarity was defined already in the commit 30d95c6d7092 ("ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi") in v3.18 kernel and later changed to use defined GPIO constants in v4.4 kernel by the commit 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards"). While the latter commit did not introduce the issue I'm marking it with Fixes tag due the v4.4 kernels still being maintained. Fixes: 3a637e008e54 ("ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards") Cc: linux-stable <stable@vger.kernel.org> # 4.4+ Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: dts: logicpd-torpedo: Remove unnecessary notes/commentsAdam Ford2019-11-142-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There used to be a bug in the video driver that caused the timings for the LCD to calculate in a way on the DM3730 which made it hang. The work around for this bug was to set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 in the kernel. This work around is no longer needed as the video drivers have been corrected. This patch removes the legacy note. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | ARM: dts: logicpd-torpedo-baseboard: Enable HDQAdam Ford2019-11-141-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The baseboard of the Logic PD Torpedo development kit has a socket for a rechargable battery. The battery is monitored by a charger which can communicate of the the 1-wire HDQ pin. This patch enables the pinmux for the HDQ pin. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | | Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of ↵Olof Johansson2019-12-061-2/+2
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few ti-sysc related fixes for v5.5 merge window Just few minor changes that can be merged when suitable, but would be good to have these in v5.5-rc1 to remove dependencies between branches for more changes later on in v5.6: - Add quirk handling for AESS (Audio Engine Sub System) - We want to drop the useless gptimer option for omap4 as there are local timers - A minor error path handling improvment for sysc_child_add_named_clock() that will make further patching a bit easier * tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock() ARM: OMAP2+: Drop useless gptimer option for omap4 bus: ti-sysc: Add module enable quirk for audio AESS Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
| | \ \ \ \
| | \ \ \ \
| *-. \ \ \ \ Merge branches 'omap-for-v5.5/soc' and 'omap-for-v5.5/ti-sysc' into ↵Tony Lindgren2019-11-201-2/+2
| |\ \ \ \ \ \ | | | | |/ / / | | | |/| | | | | | | | | | omap-for-v5.5/ti-sysc-late
| | * | | | | ARM: OMAP2+: Drop useless gptimer option for omap4Tony Lindgren2019-11-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have local timers on Cortex-A9, so using the gptimer option makes no sense. Let's just drop it for omap4 to simplify the timer options a bit. If this is really needed, it can be still done by specifying dts properties in the board specific file for assigned-clocks and assigned-clock-parents. This gets us a bit closer to start dropping legacy platform data for gptimers except for timer1 that is used for system clockevent. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | | Merge tag 'omap-for-v5.5/soc-late-signed' into omap-for-v5.5/ti-sysc-lateTony Lindgren2019-11-2039-431/+465
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Few late SoC changes for v5.5 merge window These changes just clean up few typos, and there is one non-critical correction of missing put_device() after calling of_platform_populate() for display controller. Naturally none of this is urgent and can be merged when suitable.
* | | | | | | ARM: multi_v7_defconfig: Restore debugfs supportMarek Szyprowski via Linux.Kernel.Org2019-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fd7d58f0dbc3 ("ARM: multi_v7_defconfig: renormalize based on recent additions") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which were enabled by CONFIG_PERF_EVENTS. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | | | | ARM: defconfig: re-run savedefconfig on multi_v* configsOlof Johansson2019-12-053-41/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is mostly to reorder the entries as they've moved in the Kconfig hierarchies. Doing this periodically (but not very often) simplifies conflict resolution for new options, etc. Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | | | | Merge mainline/master into arm/fixesOlof Johansson2019-12-05498-8923/+27440
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
| * \ \ \ \ \ \ Merge tag 'armsoc-defconfig' of ↵Linus Torvalds2019-12-0513-15/+83
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits) ARM: config: multi_v5: ASPEED SDHCI, SGPIO ARM: configs: multi_v7: ASPEED network, gpio, FSI ARM: config: aspeed-g4: Add MMC, and cleanup ARM: config: aspeed-g5: Add SGPIO and FSI drivers ARM: config: aspeed-g5: Enable 8250_DW quirks arm64: defconfig: Change CONFIG_AT803X_PHY from m to y ARM: shmobile: defconfig: Refresh for v5.4-rc1 arm64: defconfig: Enable R8A77961 SoC ARM: configs: sunxi: Enable MICREL_PHY arm64: defconfig: add new Allwinner crypto options ARM: configs: sunxi: add new Allwinner crypto options ARM: tegra: Enable Tegra VDE driver in tegra_defconfig ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052 arm64: defconfig: Enable configs for S32V234 arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module arm64: defconfig: Enable SMMU v3 PMCG arm64: defconfig: Enable HiSilicon ZIP controller arm64: defconfig: enable Altera GPIO controller ARM: multi_v7_defconfig: Enable audio support for stm32mp157 arm64: defconfig: enable rsu driver ...
| | * \ \ \ \ \ \ Merge tag 'aspeed-5.5-defconfig' of ↵Olof Johansson2019-11-174-6/+29
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig ASPEED device tree updates for 5.5 This adds recently merged drivers to the aspeed g4 and g5 defconfigs, and to the multi v5 and v7 shared defconfigs. * tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: config: multi_v5: ASPEED SDHCI, SGPIO ARM: configs: multi_v7: ASPEED network, gpio, FSI ARM: config: aspeed-g4: Add MMC, and cleanup ARM: config: aspeed-g5: Add SGPIO and FSI drivers ARM: config: aspeed-g5: Enable 8250_DW quirks Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | | | ARM: config: multi_v5: ASPEED SDHCI, SGPIOJoel Stanley2019-11-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | | * | | | | | | ARM: configs: multi_v7: ASPEED network, gpio, FSIJoel Stanley2019-11-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run on those boards. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | | * | | | | | | ARM: config: aspeed-g4: Add MMC, and cleanupJoel Stanley2019-11-131-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR. Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400 systems. The remaining changes are cleanups from regenerating the defconfig. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | | * | | | | | | ARM: config: aspeed-g5: Add SGPIO and FSI driversJoel Stanley2019-11-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are recently merged drivers for ASPEED systems. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | | * | | | | | | ARM: config: aspeed-g5: Enable 8250_DW quirksJoel Stanley2019-11-131-0/+1
| | | | |_|/ / / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver option is used by the AST2600 A0 boards to work around a hardware issue. Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Joel Stanley <joel@jms.id.au>
| | * | | | | | | Merge tag 'at91-5.5-defconfig' of ↵Olof Johansson2019-11-082-0/+2
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.5 - Unselect PIT now that the TCBs can be used at boot time * tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: unselect PIT Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.net Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | | | ARM: configs: at91: unselect PITAlexandre Belloni2019-10-142-0/+2
| | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PIT is not required anymore to successfully boot and may actually harm in case preempt-rt is used because the PIT interrupt is shared. Disable it so the TCB clocksource is used. Link: https://lore.kernel.org/r/20191009194814.15034-1-alexandre.belloni@bootlin.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| | * | | | | | | Merge tag 'qcom-defconfig-for-5.5' of ↵Olof Johansson2019-11-061-0/+1
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM Based defconfig Updates for v5.5 * Enable OCMEM support * tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: qcom_defconfig: add ocmem support Link: https://lore.kernel.org/r/1573068840-13098-3-git-send-email-agross@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | | | ARM: qcom_defconfig: add ocmem supportBrian Masney2019-10-071-0/+1
| | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ocmem driver that's needed for some a3xx and a4xx based systems. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
| | * | | | | | | Merge tag 'imx-defconfig-5.5' of ↵Olof Johansson2019-11-061-1/+3
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.5: - Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support in imx_v6_v7_defconfig. - Enable newly added S32V234 SoC and its UART driver support in arm64 defconfig. - Built i.MX8QXP SCU key driver as module in arm64 defconfig. - Change AT803X Ethernet PHY driver from module to built-in, so that we can boot i.MX8MM EVK board with rootfs on NFS. * tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Change CONFIG_AT803X_PHY from m to y ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052 arm64: defconfig: Enable configs for S32V234 arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | | | ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052Fabio Estevam2019-10-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the CONFIG_TOUCHSCREEN_DA9052 option, so that touchscreen can be functional by default on imx53-qsb. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | | * | | | | | | ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernelLeonard Crestez2019-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some imx chips (6sll, 6ulz, 7ulp) don't have ethernet support and only a limited number of USB controllers. For such cases NXP suggests configuring the USB controller as an ethernet gadget for network boot testing. Set USB_CONFIGFS to be built into the kernel so that we can configure the ethernet gadget without needing modules. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | | * | | | | | | ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by defaultAnson Huang2019-10-031-0/+1
| | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Select CONFIG_IMX7ULP_WDT by default to support i.MX7ULP watchdog. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | | | Merge tag 'tegra-for-5.5-arm-defconfig' of ↵Olof Johansson2019-11-041-0/+2
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig ARM: tegra: Default configuration changes for v5.5-rc1 Enables the Tegra VDE driver by default. This is currently in staging but can be used with existing userspace to do hardware-accelerated video decoding of H.264 streams. * tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable Tegra VDE driver in tegra_defconfig Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | | | ARM: tegra: Enable Tegra VDE driver in tegra_defconfigDmitry Osipenko2019-10-291-0/+2
| | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The video decoder driver was tested by time and works absolutely fine. The reason why it is in staging is because it doesn't provide common V4L interface yet, this shouldn't stop driver enabling in the defconfig since our userspace (libvdpau-tegra) provides combined acceleration of decoding and displaying without use of V4L. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| | * | | | | | | Merge tag 'sunxi-config-for-5.5-2' of ↵Olof Johansson2019-11-041-0/+3
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig Two new drivers enabled in sunxi_defconfig: one for the PHY found on multiple boards, one for the new crypto driver. * tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: configs: sunxi: Enable MICREL_PHY ARM: configs: sunxi: add new Allwinner crypto options Link: https://lore.kernel.org/r/27125172-7ce8-427e-83f9-8e9bd69d50a4.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | | | ARM: configs: sunxi: Enable MICREL_PHYPriit Laes2019-11-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include support for Micrel KSZ9031 PHY driver in sunxi_defconfig, which fixes issues of link not coming up at boot time with certain link partners. Micrel KSZ9031 PHY chip is used on Olimex A20-OLinuXino-LIME2 boards. The errata fix itself has been implemented in commit "3aed3e2a143c96: net: phy: micrel: add Asym Pause workaround" Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
| | | * | | | | | | ARM: configs: sunxi: add new Allwinner crypto optionsCorentin Labbe2019-11-011-0/+2
| | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the new Allwinner crypto configs to sunxi_defconfig Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
| | * | | | | | | Merge tag 'renesas-arm-defconfig-for-v5.5-tag1' of ↵Olof Johansson2019-11-041-3/+0
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.5 - Refresh shmobile_defconfig for v5.4-rc1. * tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Refresh for v5.4-rc1 Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 02:14:25 +0100