summaryrefslogtreecommitdiffstats
path: root/arch/arm (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldpTony Lindgren2014-06-034-5/+171
| | | | | | | | | | | | | | | | | Looks like quite a few omap3 boards have sharp ls037v7dw01 that's configured as various panel dpi entries for whatever legacy reasons. For device tree based support, let's just configure these properly for panel ls037v7dw01 instead of panel dpi. This patch creates a common file for panel ls037v7dw01, and makes boards ldp and omap3-evm to use it. The ls037v7dw01 also seems to be coupled with an ad7846 touchscreen controller for the omaps, so let's add a basic configuration for the touchscreen also using the default values. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* ARM: dts: omap3-gta04: Add display supportMarek Belisko2014-06-031-0/+90
| | | | | | | | | This patch add support for lcd display on gta04 board. Display control is connected to spi (used spi bitbang driver). Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap5-uevm.dts: add display nodesTomi Valkeinen2014-06-031-0/+80
| | | | | | | | omap5-uevm has a single HDMI output. Add the necessary display information, including pinmuxing. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap5-uevm.dts: add tca6424aTomi Valkeinen2014-06-031-0/+7
| | | | | | | omap5-uevm has a tca6424a I/O expander. Add it to the .dts file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap5.dtsi: add DSS nodesTomi Valkeinen2014-06-031-0/+60
| | | | | | | Add OMAP5 DSS nodes to omap5.dtsi. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am43x-epos-evm: add LCD dataTomi Valkeinen2014-06-031-0/+96
| | | | | | | Add DT data for am43x-epos-evm's LCD panel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am437x-gp-evm: add LCD dataSathya Prakash M R2014-06-031-0/+97
| | | | | | | | Add DT data for am437x-gp-evm's LCD panel. Signed-off-by: Sathya Prakash M R <sathyap@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am4372.dtsi: add DSS informationSathya Prakash M R2014-06-031-0/+29
| | | | | | | | | Add DT data for the display subsystem for AM4372. The DSS on AM4372 is basically OMAP3's DSS, without DSI and VENC blocks. Signed-off-by: Sathya Prakash M R <sathyap@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for-v3.16/clk-dt' of https://github.com/t-kristo/linux-pm into ↵Tony Lindgren2014-05-2811-83/+2000
|\ | | | | | | omap-for-v3.16/dt-v2
| * ARM: dts: omap2 clock dataTero Kristo2014-05-285-0/+1916
| | | | | | | | | | | | | | This patch creates a unique node for each clock in the OMAP2 power, reset and clock manager (PRCM). Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: AM4372: clk: efuse based crystal frequency detectAfzal Mohammed2014-05-231-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently oscillator frequency is determined based on sysboot settings, it may not be the case always. To determine it properly, efuse settings also has to be read. CONTROL_STATUS register holds this information. Bit 31: if 0, frequency to be determined based on sysboot if 1, frequency to be determined based on efuse Bit 29,30 - for efuse detection of frequency Bit 22,23 - for sysboot detection of frequency Add clock nodes (mux) to determine oscillator frequency as above. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: am43xx-clocks.dtsi: add ti, set-rate-parent to display clock pathTomi Valkeinen2014-05-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | We need set-rate-parent flags for the display's clock path so that the DSS driver can change the clock rate of the PLL. This patchs adds the ti,set-rate-parent flag to disp_clk and dpll_disp_m2_ck clock nodes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: omap5-clocks.dtsi: add ti, set-rate-parent to dss_dss_clkTomi Valkeinen2014-05-231-0/+1
| | | | | | | | | | | | | | | | Add ti,set-rate-parent to dss_dss_clk so that the DSS driver can set the rate. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: omap4: add twd clock to DTGilles Chanteperdrix2014-05-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Booting Linux 3.14 on Pandaboard currently gets the following message displayed: smp_twd: clock not found -2 Define "mpu_periphclk" as the twd clock in omap4 dts to avoid this. Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: omap54xx-clocks: Correct abe_iclk clock nodePeter Ujfalusi2014-05-231-4/+5
| | | | | | | | | | | | | | | | | | | | | | abe_iclk's parent is aess_fclk and not abe_clk. Also correct the parameters for clock rate calculation as used for OMAP4 since in PRCM level there's no difference between the two platform regarding to AESS/ABE clocking. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: omap54xx-clocks: remove the autoidle properties for clock nodesPeter Ujfalusi2014-05-231-48/+0
| | | | | | | | | | | | | | | | | | | | In OMAP5 bit 8 in PRCM registers are not defined (Reserved) unlike their counterpart in OMAP4. It is better to not write to these bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: am43x-clock: add tbclk data for ehrpwmPoddar, Sourav2014-05-231-0/+48
| | | | | | | | | | | | | | | | | | | | We need "tbclk" clock data for the functioning of ehrpwm module. Hence, populating the required clock information in clock dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: am33xx-clock: Fix ehrpwm tbclk dataPoddar, Sourav2014-05-231-24/+6
| | | | | | | | | | | | | | | | | | tbclk does not need to be a composite clock, we can simply use gate clock for this purpose. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 pathLaurent Pinchart2014-05-161-0/+1
| | | | | | | | | | | | | | | | | | | | Set 'ti,set-rate-parent' property for the dpll4_m5x2_mul_ck clock, which is used for the ISP functional clock. This fixes the OMAP3 ISP driver's clock rate configuration, which needs the rate to be propagated properly to the divider node (dpll4_m5_ck). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ckLaurent Pinchart2014-05-162-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | We need to use set-rate-parent for dpll4_m5 clock path, so use the ti,fixed-factor-clock version which supports set-rate-parent property. The set-rate-parent flag itself is set in the following patch, this one just changes the clock driver to ti,fixed-factor-clock without any other changes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
| * ARM: dts: am43xx-clocks: use ti, fixed-factor-clock for dpll_per_clkdcoldoDave Gerlach2014-05-161-3/+6
| | | | | | | | | | | | | | | | | | | | Use the ti,fixed-factor-clock version so that autoidle for dpll_per_clkdcoldo is properly controlled after power management code is introduced. Without this the clock may be held active even when it is gated. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | ARM: dts: am437x-gp-evm: add support for parallel NAND flashPekon Gupta2014-05-271-0/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds pinmux and DT node for Micron (MT29F4G08AB) x8 NAND device present on am437x-gp-evm board. (1) As NAND Flash data lines are muxed with eMMC, Thus at a given time either eMMC or NAND can be enabled. Selection between eMMC and NAND is controlled: (a) By dynamically driving following GPIO pin from software SPI2_CS0(GPIO) == 0 NAND is selected (default) SPI2_CS0(GPIO) == 1 eMMC is selected (b) By statically using Jumper (J89) on the board (2) As NAND device connnected to this board has page-size=4K and oob-size=224, So ROM code expects boot-loaders to be flashed in BCH16 ECC scheme for NAND boot. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: gpmc: enable BCH_HW ecc-scheme for AM43xx platformsPekon Gupta2014-05-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: commit 0611c41934ab35ce84dea34ab291897ad3cbc7be ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes Though the commit log of above commit mentions AM43xx platforms, but code change missed AM43xx. This patch adds AM43xx to list of those SoC which have built-in ELM hardware engine, so that BCH ecc-schemes with hardware error-correction can be enabled on AM43xx devices. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3 a83x: fix duplicate usb pin configChristoph Fritz2014-05-271-3/+0
| | | | | | | | | | | | | | | | Node usbhshost is supporting pinctrl, so the deprecated quirk call can be removed. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3: set mcbsp2 statusChristoph Fritz2014-05-271-0/+4
| | | | | | | | | | | | | | This patch fixes audio support for omap3-lilly-a83x. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3-n900: Add modem supportSebastian Reichel2014-05-271-1/+42
| | | | | | | | | | | | | | | | | | Add modem device tree data to Nokia N900's DTS file. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3-n900: Add SSI supportSebastian Reichel2014-05-274-0/+91
| | | | | | | | | | | | | | | | | | Add SSI device tree data for OMAP3 and Nokia N900. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Fix ssi hwmod entry to allow idlingTony Lindgren2014-05-271-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The current entry prevents system from idling if the hwmod is defined in the .dts file so let's change the idlemodes. Note that we probably don't have SYSC_HAS_EMUFREE or SYSS_HAS_RESET_STATUS either. If we do, those can be added later on. Acked-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: Enable mcpdm and mcbsp1 on DuoVeroJoachim Eastwood2014-05-201-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 7adb0933b18debef3 (ARM: dts: omap4: Set all audio related IP's status to disabled as default) all audio related device are disabled by default. Most boards were updated to enable devices explicitly, but DuoVero was missed. mcpdm is used for twl6040 and mcbsp1 is used for BlueTooth audio. Cc: florian.vaussard@epfl.ch Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: Convert DuoVero Parlor to use IOPAD macroJoachim Eastwood2014-05-202-51/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conversion done by following awk script. /0x[0-9a-f]{1,3} \(PIN/ { offset = sprintf("OMAP4_IOPAD(0x%03x, ", strtonum($1) + 64) sub(/0x[0-9a-f]{1,3} \(/, offset, $0) print $0 next } { print $0 } Cc: florian.vaussard@epfl.ch Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partitionPekon Gupta2014-05-201-1/+1
| | | | | | | | | | | | | | | | MTD NAND partition for file-system should start at offset=0xA00000 Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: dra7: add support for parallel NAND flashMinal Shah2014-05-202-0/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DRA7xx platform has in-build GPMC and ELM h/w engines which can be used for accessing externel NAND flash device. This patch: - adds generic DT binding in dra7.dtsi for enabling GPMC and ELM h/w engines - adds DT binding for Micron NAND Flash (MT29F2G16AADWP) present on dra7-evm *Important* On DRA7 EVM, GPMC_WPN and NAND_BOOTn are controlled by DIP switch So following board settings are required for NAND device detection: SW5.9 (GPMC_WPN) = LOW SW5.1 (NAND_BOOTn) = HIGH Signed-off-by: Minal Shah <minalkshah@gmail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am437x-gp-evm: Add ethernet support for GP EVMMugunthan V N2014-05-201-0/+72
| | | | | | | | | | | | | | Add CPSW ethernet support for AM437x GP EVM which has one slave pinned out Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am4372: Add cpsw phy sel dt nodeMugunthan V N2014-05-201-0/+6
| | | | | | | | | | | | | | Add cpsw phy sel device tree node for selecting phy mode in control module Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Use pdata quirks for wl12xx on VAR-STK/DVK-OM44Joachim Eastwood2014-05-201-0/+7
| | | | | | | | | | Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: Add VAR-SOM-OM44 WLAN nodesJoachim Eastwood2014-05-203-0/+70
| | | | | | | | | | | | | | | | Both the VAR-STK-OM44 and VAR-DVK-OM44 boards comes with the WLAN/BT version of the system on module VAR-SOM-OM44. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: Add support for OMAP4 VAR-DVK-OM44Joachim Eastwood2014-05-202-0/+71
| | | | | | | | | | | | Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: Add support for OMAP4 Variscite OM44 familyJoachim Eastwood2014-05-205-97/+595
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for VAR-SOM-OM44[1] SODIMM system on module from Variscite. SoM features a OMAP4460, 1GB RAM, Gigabit Ethernet (LAN7500) and optional WLAN/BT. Also add support for VAR-STK-OM44 development board from Variscite. This kit features a VAR-SOM-OM44 and the carrier board VAR-OM44CustomBoard[2]. The VAR-STK-OM44 is the same as VAR-DVK-OM44 but without the LCD display. omap4-var-stk-om44.dts replace the old and very limited omap4-var-som.dts. [1] http://www.variscite.com/products/system-on-module-som/cortex-a9/var-som-om44-cpu-ti-omap-4-omap4460 [2] http://www.variscite.com/products/single-board-computers/var-om44customboard Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: Change IOPAD macro's for OMAP4/5Joachim Eastwood2014-05-202-37/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP4/5 TRMs primarily list address offsets from the padconf physical address (which is not driver base address) and not always the absolute physical address for padconf registers like some other OMAP TRMs. So create a new macro to use this offset and to avoid confusion between different OMAP parts. For more information, see the tables in TRM for named something like "Device Core Control Module Pad Configuration Register Fields" and "Device Wake-Up Control Module Pad Configuration Register Fields" Note that we now also have to update cm-t54 for the fixed up offsets. Signed-off-by: Joachim Eastwood <manabian@gmail.com> [tony@atomide.com: updated comments, updated cm-t54] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: AM33XX: fix ethernet and mdio default stateJohan Hovold2014-05-146-1/+21
| | | | | | | | | | | | | | | | Make sure ethernet and mdio nodes are disabled by default and enable them explicitly only on boards that actually use them. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am4372: Add hdq device tree dataSourav Poddar2014-05-142-0/+22
| | | | | | | | | | | | | | | | Add device tree nodes and pinmux for hdq/1wire on am43x epos evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: omap2+: skip device build from platform code for dtSourav Poddar2014-05-141-0/+2
| | | | | | | | | | | | | | | | | | For SOCs with dt enabled, device should be build through device tree. Prevent device build call from platform code, if device tree is enabled. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | dts: dra7-evm: add USB supportRoger Quadros2014-05-141-0/+24
| | | | | | | | | | | | | | | | | | | | Add USB pinmux information and USB modes for the USB controllers. CC: Benoît Cousson <bcousson@baylibre.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: dra7: Add USB related nodesRoger Quadros2014-05-142-10/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | Add nodes for the Super Speed USB controllers, omap-control-usb, USB2 PHY and USB3 PHY devices. Remove ocp2scp1 address space from hwmod data as it is now provided via device tree. CC: Benoît Cousson <bcousson@baylibre.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: dra7-clock: Add "l3init_960m_gfclk" clock gateRoger Quadros2014-05-141-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This clock gate description is missing in the older Reference manuals. It is present on the SoC to provide 960MHz reference clock to the internal USB PHYs. Reference: DRA75x_DRA74x_ES1.1_NDA_TRM_vO.pdf, pg. 900, Table 3-812. CM_COREAON_L3INIT_60M_GFCLK_CLKCTRL Use l3init_960m_gfclk as parent of usb_otg_ss1_refclk960m and usb_otg_ss2_refclk960m. CC: Benoît Cousson <bcousson@baylibre.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap4+: Add clocks to USB2 PHY nodeRoger Quadros2014-05-142-0/+4
| | | | | | | | | | | | | | | | | | | | | | The USB2 PHY driver expects named clocks for wakeup clock and reference clock. Provide this information for USB2 PHY nodes in OMAP4 and OMAP5 SoC DTS. CC: Benoît Cousson <bcousson@baylibre.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: dra7: add OCP2SCP3 and SATA nodesBalaji T K2014-05-141-0/+39
| | | | | | | | | | | | | | | | | | | | | | Add nodes for OCP2SCP3 bus, SATA controller and SATA PHY. [Roger Q] Clean up. Updated IRQ for interrupt crossbar. CC: Benoit Cousson <bcousson@baylibre.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap5: add sata nodeBalaji T K2014-05-141-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | Add support for sata. [Roger Q] Clean up. CC: Benoit Cousson <bcousson@baylibre.com> CC: Tony Lindgren <tony@atomide.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am335x-evm: fix comments for lcd pinsWolfram Sang2014-05-131-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | In the comments, LCD pins 16-23 were numbered in the wrong order. Fix this and use proper pinmux constants for all entries while we are at it. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Cc: Benoit Parrot <bparrot@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: omap3-n900: use MATRIX_KEY for keymapSebastian Reichel2014-05-061-51/+52
| | | | | | | | | | | | | | | | Use MATRIX_KEY macro from dt-bindings/input/input.h to make the keyboard matrix human readable. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 09:45:08 +0100