summaryrefslogtreecommitdiffstats
path: root/arch/mips/Kconfig (follow)
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernelsJames Hogan2017-03-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When a 32-bit kernel is configured to support MIPS64r6 (CPU_MIPS64_R6), MIPS_O32_FP64_SUPPORT won't be selected as it should be because MIPS32_O32 is disabled (o32 is already the default ABI available on 32-bit kernels). This results in userland FP breakage as CP0_Status.FR is read-only 1 since r6 (when an FPU is present) so __enable_fpu() will fail to clear FR. This causes the FPU emulator to get used which will incorrectly emulate 32-bit FPU registers. Force o32 fp64 support in this case by also selecting MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT. Fixes: 4e9d324d4288 ("MIPS: Require O32 FP64 support for MIPS64 with O32 compat") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0.x- Patchwork: https://patchwork.linux-mips.org/patch/15310/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
* Merge tag 'mips_4.11' of ↵Linus Torvalds2017-02-211-12/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "Here's the main MIPS pull request for 4.11. It contains a few new features such as IRQ stacks, cacheinfo support, and KASLR for Octeon CPUs, and a variety of smaller improvements and fixes including devicetree additions, kexec cleanups, microMIPS stack unwinding fixes, and a bunch of build fixes to clean up continuous integration builds. Its all been in linux-next for at least a couple of days, most of it far longer. Miscellaneous: - Add IRQ stacks - Add cacheinfo support - Add "uzImage.bin" zboot target - Unify performance counter definitions - Export various (mainly assembly) symbols alongside their definitions - Audit and remove unnecessary uses of module.h kexec & kdump: - Lots of improvements and fixes - Add correct copy_regs implementations - Add debug logging of new kernel information Security: - Use Makefile.postlink to insert relocations into vmlinux - Provide plat_post_relocation hook (used for Octeon KASLR) - Add support for tuning mmap randomisation - Relocate DTB microMIPS: - A load of unwind fixes - Add some missing .insn to fix link errors MIPSr6: - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6 - Allow pre-r6 emulation on SMP MIPSr6 kernels Cache management: - Treat physically indexed dcache as non-aliasing - Add return errors to protected cache ops for KVM - CM3: Ensure L1 & L2 cache ECC checking matches - CM3: Indicate inclusive caches - I6400: Treat dcache as physically indexed Memory management: - Ensure bootmem doesn't corrupt reserved memory - Export some TLB exception generation functions for KVM OF: - NULL check initial_boot_params before use in of_scan_flat_dt() - Fix unaligned access in of_alias_scan() SMP: - CPS: Don't BUG if a CPU fails to start Other fixes: - Fix longstanding 64-bit IP checksum carry bug - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE, CPU_FREQ_STAT,SCSI_DH changes - Disable certain builtin compiler options, stack-check (whole kernel), asynchronous-unwind-tables (VDSO). - A bunch of build fixes from kernelci.org testing - Various other minor cleanups & corrections BMIPS: - Migrate interrupts during bmips_cpu_disable - BCM47xx: Add Luxul devices - BCM47xx: Fix Asus WL-500W button inversion - BCM7xxx: Add SPI device nodes Generic (multiplatform): - Add kexec DTB passing - Fix big endian - Add cpp_its_S in ksym_dep_filter to silence build warning IP22: - Reformat inline assembler code to modern standards - Fix binutils 2.25 build error IP27: - Fix duplicate CAC_BASE definition build error - Disable qlge driver to workaround broken compiler Lantiq: - Refresh defconfig and activate more drivers - Lock DMA register access - Fix cascading IRQ setup - Fix build of VPE loader - xway: Fix ethernet packet header corruption over reboot Loongson1 - Add watchdog support - 1B: Reduce DEFAULT_MEMSIZE to 64MB - 1B: Change OSC clock name to match rest of kernel - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB Octeon: - Add KASLR support - Support Octeon III USB controller - Fix large copy_from_user corner case - Enable devtmpfs in defconfig Netlogic: - Fix non-default XLR build error due to netlogic,xlp-pic code - Fix assembler warning from smpboot.S pic32mzda: - Fix linker error when early printk is disabled Pistachio: - Add base device tree - Add Ci40 "Marduk" device tree Ralink: - Support raw appended DTB - Add missing I2C & I2S clocks - Add missing pinmux and fix pinmux function name typo - Add missing clk_round_rate() - Clean up prom_init() - MT7621: Set SoC type - MT7621: Support highmem TXx9: - Modernize printing of kernel messages and resolve KERN_CONT fallout - 7segled: use permission-specific DEVICE_ATTR variants XilFPGA: - Add IRQ controller and UART IRQ - Add AXI I2C and emaclite to DT & defconfig" * tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits) MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables MIPS: BCM47XX: Fix button inversion for Asus WL-500W MIPS: DTS: Add img directory to Makefile MIPS: ip27: Disable qlge driver in defconfig MIPS: pic32mzda: Fix linker error for pic32_get_pbclk() MIPS: Lantiq: Keep ethernet enabled during boot MIPS: OCTEON: Fix copy_from_user fault handling for large buffers MIPS: Fix special case in 64 bit IP checksumming. MIPS: OCTEON: Enable DEVTMPFS MIPS: lantiq: Set physical_memsize MIPS: sysmips: Remove duplicated include from syscall.c Kbuild: Add cpp_its_S in ksym_dep_filter MIPS: Audit and remove any unnecessary uses of module.h MIPS: Unify perf counter register definitions MIPS: Disable stack checks on MIPS kernels MIPS: OCTEON: Platform support for OCTEON III USB controller MIPS: Lantiq: Fix cascaded IRQ setup MIPS: sync-r4k: Fix KERN_CONT fallout MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch MIPS: Fix distclean with Makefile.postlink ...
| * MIPS: Generic: Fix big endian CPUs on generic machineMatt Redfearn2017-01-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little endian peripherals. Without this patch, big endian kernels fail to communicate with little endian periperals, such as PCI devices, on QEMU and FPGA based platforms. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support") Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Kconfig: Fix indentation for kexec-related entriesMarcin Nowakowski2017-01-031-7/+7
| | | | | | | | | | | | | | | | | | Kconfig entries are not aligned properly, so remove incorrect whitespace. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14631/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add support for ARCH_MMAP_RND_{COMPAT_}BITSMatt Redfearn2017-01-031-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch_mmap_rnd() uses hard-coded limits of 16MB for the randomisation of mmap within 32bit processes and 256MB in 64bit processes. Since v4.4 other arches support tuning this value in /proc/sys/vm/mmap_rnd_bits. Add support for this to MIPS. Set the minimum(default) number of bits randomisation for 32bit to 8 - which with 4k pagesize is unchanged from the current 16MB total randomness. The minimum(default) for 64bit is 12bits, again with 4k pagesize this is the same as the current 256MB. This patch is necessary for MIPS32 to pass the Android CTS tests, with the number of random bits set to 15. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Daniel Cashman <dcashman@android.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Allow pre-r6 emulation on SMP MIPSr6 kernelsPaul Burton2017-01-031-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | There's no reason for the pre-r6 instruction emulation code to be limited to uniprocessor kernels. We already emulate atomic memory access instructions in a way that works for SMP systems, and nothing else should be affected. Remove the artificial limitation, allowing pre-r6 instruction emulation to be used with SMP kernels. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14410/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Loongson1C: Remove ARCH_WANT_OPTIONAL_GPIOLIBKelvin Cheung2017-01-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes ARCH_WANT_OPTIONAL_GPIOLIB due to upstream changes. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Yang Ling <gnaygnil@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: xilfpga: Use Xilinx Interrupt ControllerZubair Lutfullah Kakakhel2017-01-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | IRQs from peripherals such as i2c/uart/ethernet come via the AXI Interrupt controller. Select it in Kconfig for xilfpga and add the DT node Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14592/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Octeon: Enable KASLRSteven J. Hill2017-01-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables KASLR for Octeon systems. The SMP startup code is such that the secondaries monitor the volatile variable 'octeon_processor_relocated_kernel_entry' for any non-zero value. The 'plat_post_relocation hook' is used to set that value to the kernel entry point of the relocated kernel. The secondary CPUs will then jusmp to the new kernel, perform their initialization again and begin waiting for the boot CPU to start them via the relocated loop 'octeon_spin_wait_boot'. Inspired by Steven's code from Cavium. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACKMatt Redfearn2017-01-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since do_IRQ is now invoked on a separate IRQ stack, we select HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly from irq_exit(), rather than requiring do_softirq_own_stack. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14744/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | BMIPS: Enable prerequisites for CPUfreq in MIPS Kconfig.Markus Mayer2017-02-091-0/+2
|/ | | | | | | | Turn on CPU_SUPPORTS_CPUFREQ and MIPS_EXTERNAL_TIMER for BMIPS. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-10-151-38/+83
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
| * MIPS: Enable hardened usercopyPaul Burton2016-10-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Enable CONFIG_HARDENED_USERCOPY checks for MIPS, calling check_object size in all of copy_{to,from}_user(), __copy_{to,from}_user() & __copy_{to,from}_user_inatomic(). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14371/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: generic: Convert SEAD-3 to a generic boardPaul Burton2016-10-061-36/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: generic: Introduce generic DT-based board supportPaul Burton2016-10-061-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Support per-device DMA coherencePaul Burton2016-10-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some MIPS systems, a subset of devices may have DMA coherent with CPU caches. For example in systems including a MIPS I/O Coherence Unit (IOCU), some devices may be connected to that IOCU whilst others are not. Prior to this patch, we have a plat_device_is_coherent() function but no implementation which does anything besides return a global true or false, optionally chosen at runtime. For devices such as those described above this is insufficient. Fix this by tracking DMA coherence on a per-device basis with a dma_coherent field in struct dev_archdata. Setting this from arch_setup_dma_ops() takes care of devices which set the dma-coherent property via device tree, and any PCI devices beneath a bridge described in DT, automatically. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14349/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: PCI: Support generic driversPaul Burton2016-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce support for PCI drivers using only functionality provided generically by the PCI subsystem, by adding the minimum arch-provided functions required. The driver this has been developed for & tested with the xilinx-pcie on a MIPS Boston development board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14346/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACYPaul Burton2016-10-061-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC & CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be built to for PCI drivers using the MIPS-specific struct pci_controller API (hereafter "legacy" drivers) or more generic drivers using only functionality provided by the PCI core (hereafter "generic" drivers). The Kconfig entries are created such that platforms have to select CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no modification. The functions declared in pci.h are rearranged with those provided only by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to ensure they are only used in configurations where they are implemented. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14345/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERICPaul Burton2016-10-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce support for CONFIG_PCI_DOMAINS_GENERIC, allowing for platforms to make use of generic PCI domains instead of the MIPS-specific implementation. The set_pci_need_domain_info function is introduced to abstract away the removed need_domain_info field in struct pci_controller, and pcibios_scanbus is adjusted to use the pci_domain_nr accessor instead of directly accessing the index field. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Malta: Probe interrupt controllers via DTPaul Burton2016-10-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Probe the CPU, GIC & i8259 interrupt controllers present in the Malta system using device tree. This enables interrupts to be provided to devices using device tree as they are moved over to being probed using it. Since Malta is very configurable it's unknown whether a GIC will be present at compile time. In order to support both cases the malta_dt_shim code is added in order to detect whether a GIC is present, adjusting the DT to route interrupts correctly and nop out the GIC node if no GIC is found. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Kees Cook <keescook@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14274/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: SEAD3: Use generic ns16550a earlycon supportPaul Burton2016-10-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for early output to the ns16550a UARTs, instead relying upon generic ns16550a earlycon support. This reduces the amount of platform code required for SEAD3 without losing any functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14049/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Loongson1C: Add board supportYang Ling2016-10-041-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Adds basic platform devices for Loongson1C, including serial port and ethernet. Signed-off-by: Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: chenhc@lemote.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13304/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVEVineet Gupta2016-10-081-1/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MIPS: Select HAVE_REGS_AND_STACK_ACCESS_APIMarcin Nowakowski2016-09-191-0/+1
| | | | | | | | | Add lost Kconfig symbol. This should have been part of 40e084a506eb ('MIPS: Add uprobes support.'). Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-08-061-33/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ...
| * MIPS: ZBOOT: copy appended dtb to the end of the kernelJonas Gorski2016-08-021-20/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of rewriting the arguments, just move the appended dtb to where the decompressed kernel expects it. This eliminates the need for special casing vmlinuz.bin appended dtb files. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alban Bedel <albeu@free.fr> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13698/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Use per-mm page to execute branch delay slot instructionsPaul Burton2016-08-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Pistachio: Remove plat_setup_iocoherencyZubair Lutfullah Kakakhel2016-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Pistachio SoC does not have an IOCU. Hence, DMA is non-coherent. Remove the function checking for iocoherency and select CONFIG_DMA_NONCOHERENT in Kconfig This code is probably accidentally inherited from Malta. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Delete use of ARCH_WANT_OPTIONAL_GPIOLIBLinus Walleij2016-07-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | The Loongson1 added a new instance of ARCH_WANT_OPTIONAL_GPIOLIB which is no longer required to have GPIOLIB available in Kconfig. Delete it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13543/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Move CPU Hotplug config option into submenuMatt Redfearn2016-07-241-10/+10
| | | | | | | | | | | | | | | | | | | | | | The KConfig option HOTPLUG_CPU should appear in the "Kernel Type" submenu. Relocate it to where SMP support is configured. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Octeon: Changes to support readq()/writeq() usage.Steven J. Hill2016-07-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Update OCTEON port mangling code to support readq() and writeq() functions to allow driver code to be more portable. Updates also for word and long function pairs. We also remove SWAP_IO_SPACE for OCTEON platforms as the function macros are redundant with the new mangling code. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13780/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Select HAVE_KVM for MIPS64_R{2,6}James Hogan2016-08-011-0/+2
|/ | | | | | | | | | | | | We are now able to support KVM T&E with MIPS32 guests on some MIPS64r2 and MIPS64r6 hosts, so select HAVE_KVM so it can be enabled. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-05-291-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
| * MIPS: Pistachio: Enable KASLRMatt Redfearn2016-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | ELF/MIPS build fixRalf Baechle2016-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_MIPS32_N32=y but CONFIG_BINFMT_ELF disabled results in the following linker errors: arch/mips/built-in.o: In function `elf_core_dump': binfmt_elfn32.c:(.text+0x23dbc): undefined reference to `elf_core_extra_phdrs' binfmt_elfn32.c:(.text+0x246e4): undefined reference to `elf_core_extra_data_size' binfmt_elfn32.c:(.text+0x248d0): undefined reference to `elf_core_write_extra_phdrs' binfmt_elfn32.c:(.text+0x24ac4): undefined reference to `elf_core_write_extra_data' CONFIG_MIPS32_O32=y but CONFIG_BINFMT_ELF disabled results in the following linker errors: arch/mips/built-in.o: In function `elf_core_dump': binfmt_elfo32.c:(.text+0x28a04): undefined reference to `elf_core_extra_phdrs' binfmt_elfo32.c:(.text+0x29330): undefined reference to `elf_core_extra_data_size' binfmt_elfo32.c:(.text+0x2951c): undefined reference to `elf_core_write_extra_phdrs' binfmt_elfo32.c:(.text+0x29710): undefined reference to `elf_core_write_extra_data' This is because binfmt_elfn32 and binfmt_elfo32 are using symbols from elfcore but for these configurations elfcore will not be built. Fixed by making elfcore selectable by a separate config symbol which unlike the current mechanism can also be used from other directories than kernel/, then having each flavor of ELF that relies on elfcore.o, select it in Kconfig, including CONFIG_MIPS32_N32 and CONFIG_MIPS32_O32 which fixes this issue. Link: http://lkml.kernel.org/r/20160520141705.GA1913@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | printk/nmi: generic solution for safe printk in NMIPetr Mladek2016-05-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc8809328 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-05-191-4/+135
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.7. Here's the summary of the changes: - ATH79: Support for DTB passuing using the UHI boot protocol - ATH79: Remove support for builtin DTB. - ATH79: Add zboot debug serial support. - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega and DPT-Module. - ATH79: Update devicetree clock support for AR9132 and AR9331. - ATH79: Cleanup the DT code. - ATH79: Support newer SOCs in ath79_ddr_ctrl_init. - ATH79: Fix regression in PCI window initialization. - BCM47xx: Move SPROM driver to drivers/firmware/ - BCM63xx: Enable partition parser in defconfig. - BMIPS: BMIPS5000 has I cache filing from D cache - BMIPS: BMIPS: Add cpu-feature-overrides.h - BMIPS: Add Whirlwind support - BMIPS: Adjust mips-hpt-frequency for BCM7435 - BMIPS: Remove maxcpus from BCM97435SVMB DTS - BMIPS: Add missing 7038 L1 register cells to BCM7435 - BMIPS: Various tweaks to initialization code. - BMIPS: Enable partition parser in defconfig. - BMIPS: Cache tweaks. - BMIPS: Add UART, I2C and SATA devices to DT. - BMIPS: Add BCM6358 and BCM63268support - BMIPS: Add device tree example for BCM6358. - BMIPS: Improve Improve BCM6328 and BCM6368 device trees - Lantiq: Add support for device tree file from boot loader - Lantiq: Allow build with no built-in DT. - Loongson 3: Reserve 32MB for RS780E integrated GPU. - Loongson 3: Fix build error after ld-version.sh modification - Loongson 3: Move chipset ACPI code from drivers to arch. - Loongson 3: Speedup irq processing. - Loongson 3: Add basic Loongson 3A support. - Loongson 3: Set cache flush handlers to nop. - Loongson 3: Invalidate special TLBs when needed. - Loongson 3: Fast TLB refill handler. - MT7620: Fallback strategy for invalid syscfg0. - Netlogic: Fix CP0_EBASE redefinition warnings - Octeon: Initialization fixes - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig - Octeon: Correctly handle endian-swapped initramfs images. - Octeon: Support CN73xx, CN75xx and CN78xx. - Octeon: Remove dead code from cvmx-sysinfo. - Octeon: Extend number of supported CPUs past 32. - Octeon: Remove some code limiting NR_IRQS to 255. - Octeon: Simplify octeon_irq_ciu_gpio_set_type. - Octeon: Mark some functions __init in smp.c - Octeon: Octeon: Add Octeon III CN7xxx interface detection - PIC32: Add serial driver and bindings for it. - PIC32: Add PIC32 deadman timer driver and bindings. - PIC32: Add PIC32 clock timer driver and bindings. - Pistachio: Determine SoC revision during boot - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER. - Sibyte: Strip redundant comments from bcm1480_regs.h. - Panic immediately if panic_on_oops is set. - module: fix incorrect IS_ERR_VALUE macro usage. - module: Make consistent use of pr_* - Remove no longer needed work_on_cpu() call. - Remove CONFIG_IPV6_PRIVACY from defconfigs. - Fix registers of non-crashing CPUs in dumps. - Handle MIPSisms in new vmcore_elf32_check_arch. - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work. - Allow RIXI to be used on non-R2 or R6 cores. - Reserve nosave data for hibernation - Fix siginfo.h to use strict POSIX types. - Don't unwind user mode with EVA. - Fix watchpoint restoration - Ptrace watchpoints for R6. - Sync icache when it fills from dcache - I6400 I-cache fills from dcache. - Various MSA fixes. - Cleanup MIPS_CPU_* definitions. - Signal: Move generic copy_siginfo to signal.h - Signal: Fix uapi include in exported asm/siginfo.h - Timer fixes for sake of KVM. - XPA TLB refill fixes. - Treat perf counter feature - Update John Crispin's email address - Add PIC32 watchdog and bindings. - Handle R10000 LL/SC bug in set_pte() - cpufreq: Various fixes for Longson1. - R6: Fix R2 emulation. - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes - ELF: ABI and FP fixes. - Allow for relocatable kernel and use that to support KASLR. - Fix CPC_BASE_ADDR mask - Plenty fo smp-cps, CM, R6 and M6250 fixes. - Make reset_control_ops const. - Fix kernel command line handling of leading whitespace. - Cleanups to cache handling. - Add brcm, bcm6345-l1-intc device tree bindings. - Use generic clkdev.h header - Remove CLK_IS_ROOT usage. - Misc small cleanups. - CM: Fix compilation error when !MIPS_CM - oprofile: Fix a preemption issue - Detect DSP ASE v3 support:1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits) MIPS: pic32mzda: fix getting timer clock rate. MIPS: ath79: fix regression in PCI window initialization MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs MIPS: Fix VZ probe gas errors with binutils <2.24 MIPS: perf: Fix I6400 event numbers MIPS: DEC: Export `ioasic_ssr_lock' to modules MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC MIPS: CM: Fix compilation error when !MIPS_CM MIPS: Fix genvdso error on rebuild USB: ohci-jz4740: Remove obsolete driver MIPS: JZ4740: Probe OHCI platform device via DT MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant MIPS: pistachio: Determine SoC revision during boot MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435 mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type MIPS: Prevent "restoration" of MSA context in non-MSA kernels MIPS: cevt-r4k: Dynamically calculate min_delta_ns MIPS: malta-time: Take seconds into account MIPS: malta-time: Start GIC count before syncing to RTC MIPS: Force CPUs to lose FP context during mode switches ...
| * MIPS: BMIPS: BMIPS4380 and BMIPS5000 support RIXIFlorian Fainelli2016-05-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make BMIPS4380 and BMIPS5000 advertise support for RIXI through cpu_probe_broadcom(). bmips_cpu_setup() needs to be called shortly after that, during prom_init() in order to enable the proper Broadcom-specific register to turn on RIXI and the "rotr" instruction. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Allow RIXI to be used on non-R2 or R6 coresFlorian Fainelli2016-05-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some processors, like Broadcom's BMIPS4380 and BMIPS5000 support RIXI and the "rotr" instruction, which can be used to get a slightly more efficient page table layout. Introduce a CONFIG_CPU_HAS_RIXI such that those cores can benefit from this feature. Perform the conditional check updates where relevant. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12505/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add support for extending builtin cmdlineRabin Vincent2016-05-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the builtin command line to be extended by what the bootloader passes in. For example, the bootloader can pass specific arguments depending on the boot mode, and these should override the defaults in the builtin cmdline. The default MIPS_CMDLINE_FROM_BOOTLOADER option prepends the bootloader's cmdline to the builtin cmdline so is not suitable for this purpose. Signed-off-by: Rabin Vincent <rabinv@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13181/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Support extended ASIDsPaul Burton2016-05-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for extended ASIDs as determined by the Config4.AE bit. Since the only supported CPUs known to implement this are Netlogic XLP and MIPS I6400, select this variable ASID support based upon CONFIG_CPU_XLP and CONFIG_CPU_MIPSR6. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Retrieve ASID masks using function accepting struct cpuinfo_mipsPaul Burton2016-05-131-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for supporting variable ASID masks, retrieve ASID masks using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This will allow those functions to determine the ASID mask based upon the CPU in a later patch. This also allows for the r3k & r8k cases to be handled in Kconfig, which is arguably cleaner than the previous #ifdefs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Implement __arch_bitrev* using bitswap for MIPSr6Paul Burton2016-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Release 6 of the MIPS architecture introduced the bitswap instruction, which reverses the bits within each byte of a word. Make use of this instruction to implement the __arch_bitrev* functions, which should be faster for most MIPSr6 CPUs, reduces code size slightly and allows us to avoid the lookup table used by the generic implementation, saving 256 bytes in the kernel binary by dropping that. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13204/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS64: Support of at least 48 bits of SEGBITSLeonid Yegoshin2016-05-131-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SEGBITS is 40 bits or more, depending on CPU type. Introduces optional support for 48 bits of application virtual address space. Only 16K and 64K pages are supported. Enabling will result in a memory overhead of a small number of pages for small applications. For 64K pages a 3rd level of page tables is required which has some impact during software TLB refill. [ralf@linux-mips.org: Fixed things raised in the review of the version posted and changed kconfig to be a bit more userfriendly.] Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: aleksey.makarov@auriga.com Cc: james.hogan@imgtec.com Cc: paul.burton@imgtec.com Cc: david.daney@cavium.com Cc: peterz@infradead.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: davidlohr@hp.com Cc: kirill@shutemov.name Cc: akpm@linux-foundation.org Cc: mingo@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10051/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENTHuacai Chen2016-05-131-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast TLB refill support, etc. This patch introduce a config option, CONFIG_LOONGSON3_ENHANCEMENT, to enable those enhancements which are not probed at run time. If you want a generic kernel to run on all Loongson 3 machines, please say 'N' here. If you want a high-performance kernel to run on new Loongson 3 machines only, please say 'Y' here. Some additional explanations: 1) SFB locates between core and L1 cache, it causes memory access out of order, so writel/outl (and other similar functions) need a I/O reorder barrier. 2) Loongson 3 has a bug that di instruction can not save the irqflag, so arch_local_irq_save() is modified. Since CPU_MIPSR2 is selected by CONFIG_LOONGSON3_ENHANCEMENT, generic kernel doesn't use ei/di at all. 3) CPU_HAS_PREFETCH is selected by CONFIG_LOONGSON3_ENHANCEMENT, so MIPS_CPU_PREFETCH (used by uasm) probing is also put in this patch. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Loongson: Add Loongson-3A R2 basic supportHuacai Chen2016-05-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loongson-3 CPU family: Code-name Brand-name PRId Loongson-3A R1 Loongson-3A1000 0x6305 Loongson-3A R2 Loongson-3A2000 0x6308 Loongson-3B R1 Loongson-3B1000 0x6306 Loongson-3B R2 Loongson-3B1500 0x6307 Features of R2 revision of Loongson-3A: - Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache). - I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is 64 bytes. - 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way set-associative). - Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/ Execute-Inhibit. [ralf@linux-mips.org: Resolved merge conflicts.] Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12751/ Patchwork: https://patchwork.linux-mips.org/patch/13136/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Loongson1B: Some updates/fixes for LS1BKelvin Cheung2016-05-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add DMA device - Add NAND device - Add GPIO device - Add LED device - Update the defconfig and rename it to loongson1b_defconfig - Fix ioremap size - Other minor fixes Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/13033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Kconfig: replace OPROFILE=n to !OPROFILEYang Shi2016-05-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | In Kconfig "=n" is not correct syntax, "!" is the preferred way for false-positive expression. Signed-off-by: Yang Shi <yang.shi@windriver.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12572/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLEMatt Redfearn2016-05-131-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds KASLR to the MIPS kernel. Entropy is derived from the banner, which will change every build and random_get_entropy() which should provide additional runtime entropy. Additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from its link address (PHYSICAL_START). Because relocation happens so early in the kernel boot, the amount of physical memory has not yet been determined. This means the only way to limit relocation within the available memory is via Kconfig. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add CONFIG_RELOCATABLE Kconfig optionMatt Redfearn2016-05-131-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add option to KConfig to enable the kernel to relocate itself at runtime. Relocation is supported R2 and later of the MIPS architecture, 32bit and 64bit. The platform is also required to provide support through plat_get_fdt() added in a later patch. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12987/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 13:39:21 +0100