summaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy/common (follow)
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: Alchemy: Fix Au1100 ethernet build failureManuel Lauss2010-02-271-9/+10
| | | | | | | | | | Don't define platform info for second mac on au1100 (which only has a single mac). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1004/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: use 36bit addresses for PCMCIA resources.Manuel Lauss2010-02-271-25/+7
| | | | | | | | | | | | | | | | | | | | | | | On Alchemy the PCMCIA area lies at the end of the chips 36bit system bus area. Currently, addresses at the far end of the 32bit area are assumed to belong to the PCMCIA area and fixed up to the real 36bit address before being passed to ioremap(). A previous commit enabled 64 bit physical size for the resource datatype on Alchemy and this allows to use the correct 36bit addresses when registering the PCMCIA sockets. This patch removes the 32-to-36bit address fixup and registers the Alchemy demo board pcmcia socket with the correct 36bit physical addresses. Tested on DB1200, with a CF card (ide-cs driver) and a 3c589 PCMCIA ethernet card. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Simplify DMA channel allocation code.Ralf Baechle2010-02-271-55/+56
| | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@googlemail.com>
* MIPS: Alchemy: Remove time_lock.Ralf Baechle2010-02-271-7/+0
| | | | | | | | The sole user is au1xxx_calc_clock() which is only used in early bootup where the is no paralellism thus no race condition to protect against. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@googlemail.com>
* MIPS: Remove trailing space in messagesFrans Pop2010-02-271-1/+1
| | | | | | | | Signed-off-by: Frans Pop <elendil@planet.nl> To: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Use strlcat() for the command line argumentsYoichi Yuasa2010-02-271-14/+5
| | | | | | | Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Remove prom_getcmdline()Yoichi Yuasa2010-02-271-8/+1
| | | | | | | Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/927/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: get rid of common/reset.cManuel Lauss2010-02-273-196/+1
| | | | | | | | | | | | | Implement reset / poweroff in the board code instead. The peripheral reset code is gone too since YAMON which all in-tree boards use does the same work when it boots. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/783/ Patchwork: http://patchwork.linux-mips.org/patch/882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: irq: use runtime CPU type detectionManuel Lauss2010-02-271-43/+54
| | | | | | | | | Use runtime CPU detection instead of relying on preprocessor symbols. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Only build AU1000 INTC code for compatible cpusManuel Lauss2010-02-271-2/+4
| | | | | | | | | | Use the GPIO config symbol to only build Au1000 interrupt code on chips with compatible hw. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: use runtime cpu detection in GPIO code.Manuel Lauss2010-02-271-7/+3
| | | | | | | | | | | Remove the cpu subtype cpp macros in favor of runtime detection, to improve compile coverage of the alchemy common code. (Increases kernel size by 700 bytes). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Add au1000-eth platform deviceFlorian Fainelli2010-02-271-0/+90
| | | | | | | | | | | | | | This patch makes the board code register the au1000-eth platform device. The au1000-eth platform data can be overriden with the au1xxx_override_eth_cfg function like it has to be done for the Bosporus board which uses a different MAC/PHY setup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: David Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/618/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Extended DB1200 board support.Manuel Lauss2010-02-271-3/+0
| | | | | | | | | | | | | | | | | | | Create own directory for DB1200 code and update it with new features. - SPI support: - tmp121 temperature sensor - SPI flash on DB1200 - I2C support - NE1619 sensor - AT24 eeprom - I2C/SPI can be selected at boot time via switch S6.8 - Carddetect IRQs for SD cards. - gen_nand based NAND support. - hexleds count sleep/wake transitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: UARTs are of type 16550AManuel Lauss2010-02-271-1/+3
| | | | | | | | | UART autodetection breaks on the Au1300 but the IP blocks are identical, at least according to the datasheets. Help the 8250 driver by passing on uart type information via platform data. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: get rid of superfluous UART definitionsManuel Lauss2010-02-271-23/+21
| | | | | | | Remove unused uart bit definitions and base macros. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: prom_putchar is board dependentManuel Lauss2010-02-272-69/+1
| | | | | | | | | | | | | | | This patch replaces the general alchemy prom_putchar() implementation in favor of board-specific versions: The UART where the output of prom_putchar is directed to really depends on the board, the current implementation hardcodes this on a per-SoC basis which is just wrong. So a generic uart tx function is provided in the alchemy headers, and the boards can provide their own prom_putchar with custom destination uart, and all in-kernel alchemy boards support early printk. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss2010-02-271-4/+4
| | | | | | | | | | DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: remove dbdma compat macrosManuel Lauss2010-02-271-5/+4
| | | | | | | | | | | | Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: reduce size of irq dispatcherManuel Lauss2010-02-271-3/+5
| | | | | | | | By replacing an extra do_IRQ with a goto, the assembly shrinks from 260 to 212 bytes (gcc-4.3.4). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Stop IRQ name sharingManuel Lauss2010-02-275-183/+247
| | | | | | | | | | | | | | | | | | | | Eliminate the sharing of IRQ names among the differenct Alchemy variants. IRQ numbers need no longer be hidden behind a CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy code less reliant on a hardcoded subtype. This patch also renames the GPIO irq number constants. It's really an interrupt line, NOT a GPIO number! Code which relied on certain irq numbers to have the same name across all supported cpu subtypes is changed to determine current cpu subtype at runtime; in some places this isn't possible so a "compat" symbol is used. Run-tested on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: higher priority for system timer.Manuel Lauss2010-02-271-5/+5
| | | | | | | | Raise RTCMATCH2 interrupt priority in case it is used as the system timer tick. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Remove USB_DEV_REQ_INT prioritization hackManuel Lauss2010-02-271-28/+22
| | | | | | | | | | | | The Alchemy hardware provides a method to prioritize interrupts on a controller by assigning them to a differenct core request line. Assign usb device request interrupt to IC0 Request 0 (which has highest priority in the core and the dispatcher) and others to Request 1. The explicit check for usb device request occurrence should be obsolete now. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss2010-02-272-7/+2
| | | | | | | | | | | | | | | | | | | New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: remove board_init_irq() function.Manuel Lauss2010-02-271-8/+7
| | | | | | | | | | | | | remove board_init_irq(): On all in-kernel boards it is sufficient to initialize board interrupts in an arch_initcall by using the default linux irq functions. Some small irqmap.c files have been folded into board_setup files. Run-tested on DB1200; compile-tested on all other affected boards. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck.Manuel Lauss2010-02-011-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DBDMA descriptors need to be located at 32-byte aligned addresses; however kmalloc in conjunction with the SLAB allocator and CONFIG_DEBUG_SLUB enabled doesn't deliver any. The dbdma code works around that by allocating a larger area and realigning the start address within it. When freeing a channel however this adjustment is not taken into account which results in an oops: Kernel bug detected[#1]: [...] Call Trace: [<80186010>] cache_free_debugcheck+0x284/0x318 [<801869d8>] kfree+0xe8/0x2a0 [<8010b31c>] au1xxx_dbdma_chan_free+0x2c/0x7c [<80388dc8>] au1x_pcm_dbdma_free+0x34/0x4c [<80388fa8>] au1xpsc_pcm_close+0x28/0x38 [<80383cb8>] soc_codec_close+0x14c/0x1cc [<8036dbb4>] snd_pcm_release_substream+0x60/0xac [<8036dc40>] snd_pcm_release+0x40/0xa0 [<8018c7a8>] __fput+0x11c/0x228 [<80188f60>] filp_close+0x7c/0x98 [<80189018>] sys_close+0x9c/0xe4 [<801022a0>] stack_done+0x20/0x3c Fix this by recording the address delivered by kmalloc() and using it as parameter to kfree(). This fix is only necessary with the SLAB allocator and CONFIG_DEBUG_SLAB enabled; non-debug SLAB, SLUB do return nicely aligned addresses, debug-enabled SLUB currently panics early in the boot process. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Correct code taking the size of a pointerJulia Lawall2010-01-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | sizeof(dp) is just the size of the pointer. Change it to the size of the referenced structure. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Patchwork: http://patchwork.linux-mips.org/patch/789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Fix hang with high-frequency edge interruptsManuel Lauss2009-11-021-8/+26
| | | | | | | | | | | | | | | | | The handle_edge_irq() flowhandler disables edge int sources which occur too fast (i.e. another edge comes in before the irq handler function had a chance to finish). Currently, the mask_ack() callback does not ack the edges in hardware, leading to an endless loop in the flowhandler where it tries to shut up the irq source. When I rewrote the alchemy IRQ code I wrongly assumed the mask_ack() callback was only used by the level flowhandler, hence it omitted the (at the time pointless) edge acks. Turned out I was wrong; so here is a complete mask_ack implementation for Alchemy IC, which fixes the above mentioned problem. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Decrease size of au1xxx_dbdma_pm_regs[][]Roel Kluin2009-09-301-5/+3
| | | | | | | | | | | There are 16 individual channels (NUM_DBDMA_CHANS) to save/restore plus the global ddma block config (the +1). The last register in a channel can be skipped since it's read-only (at offset 0x18). Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL.: mipsRusty Russell2009-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | (Thanks to Al Viro for reminding me of this, via Ingo) CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so: #define CPU_MASK_ALL (cpumask_t) { { ... } } Taking the address of such a temporary is questionable at best, unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added CPU_MASK_ALL_PTR: #define CPU_MASK_ALL_PTR (&CPU_MASK_ALL) Which formalizes this practice. One day gcc could bite us over this usage (though we seem to have gotten away with it so far). So replace everywhere which used &CPU_MASK_ALL or CPU_MASK_ALL_PTR with the modern "cpu_all_mask" (a real struct cpumask *), and remove CPU_MASK_ALL_PTR altogether. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Travis <travis@sgi.com>
* MIPS: Alchemy: override loops_per_jiffy detectionManuel Lauss2009-09-171-0/+4
| | | | | | | | loops_per_jiffy depends on coreclk speed; preset it instead of letting the kernel waste precious microseconds trying to approximate it. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: get rid of allow_au1k_waitManuel Lauss2009-09-171-6/+9
| | | | | | | | | | | | | | | Eliminate the 'allow_au1k_wait' variable. MIPS kernel installs the Alchemy-specific wait code before timer initialization; if the C0 timer must be used for timekeeping the wait function is set to NULL which means no wait implementation is available. As a sideeffect, the 'wait instruction available' output in /proc/cpuinfo now correctly indicates whether 'wait' is usable. Run-tested on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: devboards: Convert to gpio calls.Manuel Lauss2009-06-171-2/+3
| | | | | | | Replace a few open-coded GPIO register accesses with gpio calls. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Rewrite GPIO support.Manuel Lauss2009-06-173-202/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current in-kernel Alchemy GPIO support is far too inflexible for all my use cases. To address this, the following changes are made: * create generic functions which deal with manipulating the on-chip GPIO1/2 blocks. Such functions are universally useful. * Macros for GPIO2 shared interrupt management and block control. * support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros. If CONFIG_GPIOLIB is not enabled, provide linux gpio framework compatibility by directly inlining the GPIO1/2 functions. GPIO access is limited to on-chip ones and they can be accessed as documented in the datasheets (GPIO0-31 and 200-215). If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and one for GPIO2, are registered. GPIOs can still be accessed by using the numberspace established in the databooks. However this is not yet flexible enough for my uses: My Alchemy systems have a documented "external" gpio interface (fixed, different numberspace) and can support a variety of baseboards, some of which are equipped with I2C gpio expanders. I want to be able to provide the default 16 GPIOs of the CPU board numbered as 0..15 and also support gpio expanders, if present, starting as gpio16. To achieve this, a new Kconfig symbol for Alchemy is introduced, CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal that they don't want the Alchemy numberspace exposed to the outside world, but instead want to provide their own. Boards are now respon- sible for providing the linux gpio interface glue code (either in a custom gpio.h header (in board include directory) or with gpio_chips). To make the board-specific inlined gpio functions work, the MIPS Makefile must be changed so that the mach-au1x00/gpio.h header is included _after_ the board headers, by moving the inclusion of the mach-au1x00/ to the end of the header list. See arch/mips/include/asm/mach-au1x00/gpio.h for more info. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Timer build fixManuel Lauss2009-05-141-1/+1
| | | | | | | Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-071-15/+15
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MIPS: Au1000: convert to using gpiolibFlorian Fainelli2009-03-301-75/+128
| | | | | | | This patch converts the GPIO board code to use gpiolib. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0Roel Kluin2009-02-271-3/+3
| | | | | | | | | With a postfix decrement t reaches -1 rather than 0, so the fall-back will not occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: mano@roarinelk.homelinux.net Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: time.c build fixManuel Lauss2009-01-301-1/+1
| | | | | | | In Linus' current -git the cpumask member is now a pointer. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: new userspace suspend interface for development boards.Manuel Lauss2009-01-112-353/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the current sysctl-based suspend interface with a new sysfs- based one which also uses the Linux-2.6 suspend model. To configure wakeup sources, a subtree for the demoboards is created under /sys/power/db1x: sys/ `-- power `-- db1x |-- gpio0 |-- gpio1 |-- gpio2 |-- gpio3 |-- gpio4 |-- gpio5 |-- gpio6 |-- gpio7 |-- timer |-- timer_timeout |-- wakemsk `-- wakesrc The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2 bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1' enables a wakesource, 0 disables it. The 'timer_timeout' node holds the timeout in seconds after which the TOYMATCH2 event should wake the system. The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex), the 'wakemsk' node can be used to get/set the wakeup mask directly. For example, to have the timer wake the system after 10 seconds of sleep, the following must be done in userspace: echo 10 > /sys/power/db1x/timer_timeout echo 1 > /sys/power/db1x/timer echo mem > /sys/power/sleep This patch also removes the homebrew CPU frequency switching code. I don't understand how it could have ever worked reliably; it does not communicate the clock changes to peripheral devices other than uarts. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/alchemy/devboards/pm.c
* MIPS: Alchemy: dbdma suspend/resume support.Manuel Lauss2009-01-112-0/+76
| | | | | | | Implement suspend/resume for DBDMA controller and its channels. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Fix up PM code on Au1550/Au1200Manuel Lauss2009-01-113-167/+219
| | | | | | | | | | | | Au1550/Au1200 have a different memory controller which requires additi- onal code to properly put memory to sleep (code taken from AMD/RMI's Linux-2.6.11 source package). Also fix up the remaining pm-related paths to compile on Au1200/Au1550 platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: move calc_clock function.Manuel Lauss2009-01-113-54/+63
| | | | | | | | | | Now that nothing in time.c depends on calc_clock, it can be moved to clocks.c where it belongs. While at it, give it a better non-generic name and call it as soon as possible in plat_mem_init. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: RTC counter clocksource / clockevent support.Manuel Lauss2009-01-113-177/+137
| | | | | | | | | | | | Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent device. As a nice side effect, this also enables use of the 'wait' instruction for runtime idle power savings. If the counters aren't enabled/working properly, fall back on the cp0 counter clock code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: remove cpu_table.Manuel Lauss2009-01-114-80/+4
| | | | | | | | | | | | | | | | Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/cputable.c
* MIPS: Alchemy: remove get/set_au1x00_lcd_clock().Manuel Lauss2009-01-112-32/+0
| | | | | | | There are no in-tree users, so remove them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: update core interrupt code.Manuel Lauss2009-01-114-571/+427
| | | | | | | | | | | | | | | | | | | | | | | This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
* MIPS: Alchemy: move commandline mangling out of common codeManuel Lauss2009-01-111-30/+4
| | | | | | | | | | | Not every alchemy-based board might want these options forced on it, and most of this stuff seems to be intended for devboard code anyway. Remove commandline mangling code out of common chip code and instead add relevant sections to all in-tree boards to not change existing behaviour. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Wire up SD controller on DB/PB1200 boards.Manuel Lauss2008-10-271-24/+74
| | | | | | | | Add au1xmmc platform data for PB1200/DB1200 boards and wire up the 2 SD controllers for them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: rename directoryRalf Baechle2008-10-1117-0/+4195
It's more than the au1000 these days. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 05:28:14 +0100