summaryrefslogtreecommitdiffstats
path: root/arch/mips/bcm47xx (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-12-147-448/+477
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
| * MIPS: BCM47XX: remove GPIO driverHauke Mehrtens2012-12-124-105/+9
| | | | | | | | | | | | | | | | | | Instated of providing an own GPIO driver use the one provided by ssb and bcma. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4592 Acked-by: Florian Fainelli <florian@openwrt.org>
| * MIPS: BCM47xx: sprom: read values without prefix as fallbackHauke Mehrtens2012-11-092-330/+447
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are bcma based devices like the Linksys E2000 out there, which do have one ieee80211 core, but no PCIe core and they are using no prefixes for the sprom. In addition some values like boardtype are stored without a prefix for the main SoC chip also when they have an additional PCIe wifi chip with an own boardtype var on some devices. The Ethernet addresses are now also read out correctly without a prefix so calling bcm47xx_fill_sprom_ethernet is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4364 Signed-off-by: John Crispin <blogic@openwrt.org>
| * MIPS: BCM47XX: read sprom without prefix if no ieee80211 coreHauke Mehrtens2012-11-091-0/+2
| | | | | | | | | | | | | | | | | | If there is no ieee80211 core on the devices like on the BCM4706 read out the sprom and the other data without using a prefix. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4361 Signed-off-by: John Crispin <blogic@openwrt.org>
| * MIPS: BCM47xx: read out full board dataHauke Mehrtens2012-11-091-20/+14
| | | | | | | | | | | | | | | | | | | | | | Read out the full board data independently of the sprom version. Now we also get the full boardflags and so on if sromrev is not set and our code would assume a rev 1 device. When a nvram option is not set because it is not there this is no problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4363 Signed-off-by: John Crispin <blogic@openwrt.org>
| * MIPS: BCM47XX: improve memory size detectionHauke Mehrtens2012-11-091-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory size is detected by finding a place where it repeats in memory. Currently we are just checking when the function prom_init is seen again, but it is better to check for a bigger part of the memory to decrease the chance of wrong results. This should fix a problem we saw in OpenWrt, where the detected available memory decreed on some devices when doing a soft reboot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4362 Signed-off-by: John Crispin <blogic@openwrt.org>
| * MIPS: BCM47XX: ignore last memory pageHauke Mehrtens2012-11-091-0/+10
| | | | | | | | | | | | | | | | | | | | Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the ddr address space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4365 Signed-off-by: John Crispin <blogic@openwrt.org>
* | ssb: move parallel flash config into an own structHauke Mehrtens2012-10-192-6/+6
|/ | | | | | | This is a preparing step for adding serial flash support. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: BCM47xx: Fix BCMA_DRIVER_PCI_HOSTMODE config dependenciesYoichi Yuasa2012-07-191-0/+1
| | | | | | | | | | warning: (BCM47XX_BCMA) selects BCMA_DRIVER_PCI_HOSTMODE which has unmet direct dependencies (BCMA_POSSIBLE && BCMA && MIPS && BCMA_HOST_PCI) warning: (BCM47XX_BCMA) selects BCMA_DRIVER_PCI_HOSTMODE which has unmet direct dependencies (BCMA_POSSIBLE && BCMA && MIPS && BCMA_HOST_PCI) Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* bcma: Move initialization of SPROM to prevent overwriteNathan Hintz2012-05-162-2/+4
| | | | | | | | | | The first thing bcm47xx_fill_sprom does is initialize (zero fill) the SPROM. For BCMA SOC, this wipes out any values previously read by bcm47xx_fill_sprom_ethernet (see arch/mips/bcm47xx/setup.c - bcm47xx_get_sprom_bcma). Move the initialization of SPROM so it is called prior to filling in any values. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: bcm47xx: read baordrev without prefix from spromHauke Mehrtens2012-05-161-0/+2
| | | | | | | | | When the boardrev with a prefix is not available, try to read it without a prefix. This is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* bcma: add boardinfo structHauke Mehrtens2012-05-162-0/+14
| | | | | | | | | | This struct contains information about the board, the chip is running on. The struct is filled for PCIe devices and SoCs. This information is used by b43 and will be used by brcmsmac soon. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: bcm47xx: refactor fetching board dataHauke Mehrtens2012-05-162-6/+13
| | | | | | | | | Now the fetching of board data also uses nvram_read_u16 and not simple_strtoul any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb: remove rev from boardinfoHauke Mehrtens2012-05-161-2/+0
| | | | | | | | | | | | | | Previously the rev contained the revision read from the pci config space and was used as board_rev in the wireless drivers. This is wrong the board_rev is only fetched from the sprom accordingly to the open source part of the Broadcom SDK and brcmsmac. This patch removes the rev from the boardinfo structure and uses the board_rev attribute from sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: BCM47XX: provide sprom to bcma busHauke Mehrtens2012-03-051-4/+35
| | | | | | | | | On SoCs the sprom is often stored in nvram in the flashchip. This patch registers a sprom fallback callback handler in bcma and provides the sprom needed for this device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: BCM47XX: move and extend sprom parsingHauke Mehrtens2012-03-053-151/+622
| | | | | | | | | | Move the sprom parsing from nvram into sprom.c. There are all values needed for sprom version 1 to 9 read from nvram and there are more sanity checks added. This is based on the sprom parsing in the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: BCM47XX: return number of written bytes in nvram_getenvHauke Mehrtens2012-03-051-2/+1
| | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* MIPS: Fix up inconsistency in panic() string argument.Ralf Baechle2011-12-071-2/+2
| | | | | | | | Panic() invokes printk() to add a \n internally, so panic arguments should not themselves end in \n. Panic invocations in arch/mips and elsewhere are inconsistently sometimes terminating in \n, sometimes not. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* mips: add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker2011-11-012-0/+2
| | | | | | | | | | Or else we get lots of variations on this: arch/mips/pci/pci.c:330: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' scattered throughout the build. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* bcm47xx: fix irq assignment for new SoCs.Hauke Mehrtens2011-08-081-0/+12
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* bcm47xx: add support for bcma busHauke Mehrtens2011-08-086-2/+130
| | | | | | | | | | This patch add support for the bcma bus. Broadcom uses only Mips 74K CPUs on the new SoC and on the old ons using ssb bus there are no Mips 74K CPUs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* bcm47xx: make it possible to build bcm47xx without ssb.Hauke Mehrtens2011-08-087-1/+44
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* bcm47xx: prepare to support different busesHauke Mehrtens2011-08-086-42/+98
| | | | | | | | | | | | Prepare bcm47xx to support different System buses. Before adding support for bcma it should be possible to build bcm47xx without the need of ssb. With this patch bcm47xx does not directly contain a ssb_bus, but a union contain all the supported system buses. As a SoC just uses one system bus a union is a good choice. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Update my e-mail addressMichael Büsch2011-07-071-1/+1
| | | | | Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* MIPS: BCM47xx: Extend the filling of SPROM from NVRAMHauke Mehrtens2011-05-191-15/+66
| | | | | | | | | | | | | Some members of the struct ssb_sprom where not filled with data available in the NVRAM. Some attribute names in the NVRAM changed from SPROM version 3 to version 4. This patch was done by analyzing the the pci sprom parser in the ssb code and some open source parts of the braodcom wireless driver used on embedded devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2365/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Register SSB fallback sprom callbackHauke Mehrtens2011-05-192-1/+24
| | | | | | | | | | | | | | We are generating the prefix based on the PCI bus address the device is on. This is done like Broadcom does it in their code expect that the the bus number is increased by one. In the SB bus implementation used by Broadcom the SB bus emulates a PCI bus so the kernel sees one PCI bus more then in our implementation. We do not handle prefixes like sb/1/ yet as they are only used on the new bus which is not implemented yet. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.Hauke Mehrtens2011-05-191-8/+21
| | | | | | | | | | | | | | | | When an other SSB based device without an own SPROM is attached, using the PCI bus to the main SSB based device, the data normally found in the SPROM will be stored in the NVRAM on modern devices. The keys, to load the data from the NVRAM, are all using some sort of prefix like pci/1/1/, pci/1/3/ or sb/1/ before the actual key. This patch extends bcm47xx_fill_sprom() to make it possible to read out these values when some prefix was used. The keys for the SPROM data used on the main chip does not have a prefix. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Swap serial console if ttyS1 was specified.Hauke Mehrtens2010-12-161-0/+16
| | | | | | | | | | | | Some devices like the Netgear WGT634U are using ttyS1 for default console output. We should switch to that console if it was given in the kernel_args parameters. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Use sscanf for parsing mac addressHauke Mehrtens2010-12-161-20/+3
| | | | | | | | | | | Instead of writing own function for parsing the mac address we now use sscanf. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Fill values for b43 into SSB spromHauke Mehrtens2010-12-161-22/+92
| | | | | | | | | | | | | | Fill the sprom with all available values from the nvram. Most of these new values are needed for the b43 or b43legacy driver. Parts of this patch have been in OpenWRT for a long time and were written by Michael Buesch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1846/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Do not read config from CFEHauke Mehrtens2010-12-161-19/+9
| | | | | | | | | | | | The config options read out here are not stored in CFE but only in NVRAM on the devices. Remove reading from CFE and only access the NVRAM. Reading out CFE does not harm but is useless here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1845/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Fix nvram_getenv return value.Hauke Mehrtens2010-08-051-2/+2
| | | | | | | | | | | | Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on success and -9 if the value was not found. If the input was wrong -8 will be returned by cfe_getenv. Change nvram_getenv to do the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Waldemar Brodkorb <wbx@openadk.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1520/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Migrate to new platform makefile style.Ralf Baechle2010-08-051-0/+7
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Really fix 128MB RAM problemHauke Mehrtens2010-08-051-8/+14
| | | | | | | | | | | | | | | | | | | The previous patch 4a86f2d27733f610e642649aca3e82e86fca9e22 (lmo) rsp. 84a6fcb368a080620d12fc4d79e07902dbee7335 (kernel.org) was wrong. The BCM47xx architecture maps the ram into a 128MB address space. It will be spaced there as often as goes into the 128MB. Detection tries to find the position where the same memory is found. When reading beyond 128MB the processor will throw an exception. If 128MB RAM is installed, it will not find a memory alias because it tries to read beyond the 128MB border. Now it just assumes 128MB installed ram if it can not find an alias. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1508/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Add NVRAM support devicesWaldemar Brodkorb2010-07-053-13/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to netboot a Linksys WRT54GS WLAN router, the bootup fails, because of following error message: ... [ 0.424000] b44: b44.c:v2.0 [ 0.424000] b44: Invalid MAC address found in EEPROM [ 0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting [ 0.436000] b44: probe of ssb0:1 failed with error -22 ... The router uses a CFE bootloader, but most of the needed environment variables for network card initialization, are not available from CFE via printenv and even though not via cfe_getenv(). The required environment variables are saved in a special partition in flash memory. The attached patch implement nvram_getenv and enables bootup via NFS root on my router. Most of the patch is extracted from the OpenWrt subversion repository and stripped down and cleaned up to just fix this issue. [Ralf: sorted out header file inclusions. Lots of unneded headers and such that should have been included.] Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Reviewed-by: Phil Sutter <phil@nwl.cc> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/1359/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Nuke trailing blank linesRalf Baechle2010-02-274-4/+0
| | | | | | | Recent git versions now warn about those and they've always been a bit of an annoyance. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Fix 128MB RAM supportHauke Mehrtens2010-02-221-0/+8
| | | | | | | | | | | Ignoring the last page when ddr size is 128M. Cached accesses to last page is causing the processor to prefetch using address above 128M stepping out of the DDR address space. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Replace all usages of CL_SIZE by COMMAND_LINE_SIZEDmitri Vorobiev2009-12-171-5/+5
| | | | | | | | | | The MIPS-specific macro CL_SIZE is merely aliasing the macro COMMAND_LINE_SIZE. Other architectures use the latter; also, COMMAND_LINE_SIZE is documented in kernel-parameters.txt, so let's use it, and remove the alias. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Make local arrays with CL_SIZE static __initdataAtsushi Nemoto2009-11-131-1/+1
| | | | | | | | | | | | | Since commit 22242681cff52bfb7cba5d2a37b91802be7a4e4c ("MIPS: Extend COMMAND_LINE_SIZE"), CL_SIZE is 4096 and local array variables with this size will cause an build failure with default CONFIG_FRAME_WARN settings. Although current users of such array variables are all early bootstrap code and not likely to cause real stack overflow (thread_info corruption), it is preferable to to declare these arrays static with __initdata. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: WGT634U: Add reset button supportAurelien Jarno2008-10-151-0/+37
| | | | | | | | This patch adds support for the reset button of WGT634U machine, using GPIO interrupts. Based on a patch from Michel Lespinasse. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Use the new SSB GPIO APIAurelien Jarno2008-10-152-53/+37
| | | | | | | | | This patch simplifies the BCM47xx GPIO code by using the new SSB GPIO API, which does a lot things that were implemented directly in the BCM47xx code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: WGT634U: Add machine detection messageAurelien Jarno2008-10-151-0/+3
| | | | | | | This adds a printk message when a WGT634U machine is detected. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] BCM47XX: Use new SSB SPROM data structureAurelien Jarno2008-02-192-7/+7
| | | | | | | | Switch the BCM47XX code to the new SPROM data structure now that the old one has been removed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] WGT634U: Register MTD as platform device.Aurelien Jarno2008-02-191-3/+66
| | | | | Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Kill duplicated setup_irq() for cp0 timerAtsushi Nemoto2007-10-191-7/+0
| | | | | | | Also many plat_timer_setup() can be killed too. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Deforest the function pointer jungle in the time code.Ralf Baechle2007-10-122-3/+1
| | | | | | | Hard to follow who is pointing what to where and why so it's simply getting in the way of the time code renovation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] GPIO LED driver for the WGT634U machineAurelien Jarno2007-10-122-1/+65
| | | | | | | | Add LED support to the WGT634U machine. It uses the new gpio-led driver and a platform driver for the pin definitions. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Add gpio support to the BCM47XX platformAurelien Jarno2007-10-122-1/+80
| | | | | | | | Add GPIO support to the BCM47XX platform. It will be used by a GPIO LED driver. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Add CFE support to BCM47XXAurelien Jarno2007-10-122-5/+159
| | | | | | | | | Add CFE support to the BCM47XX code. That includes querying CFE environment variables as well as using CFE to print messages before the serial port is initialized (early printk). Signed-off-by: Aurelien Jarno <aurel32@farad.aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Add support for BCM47XX CPUs.Aurelien Jarno2007-10-126-0/+297
Note that the BCM4710 does not support the wait instruction, this is not a mistake in the code. It originally comes from the OpenWrt patches. Cc: Michael Buesch <mb@bu3sch.de> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Florian Schirmer <jolt@tuxbox.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 19:15:57 +0100