summaryrefslogtreecommitdiffstats
path: root/arch/mips/include/asm/pgtable-bits.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: Disable pte_special() for MIPS32 with RiXiPaul Burton2019-09-201-1/+13
| | | | | | | | | | | | | | | | | | | Commit 61cbfff4b1a7 ("MIPS: pte_special()/pte_mkspecial() support") added a _PAGE_SPECIAL bit to the pgprot bits of our PTEs. Unfortunately for MIPS32 configurations with RiXi support this pushed the number of pgprot bits to 13. Since the PFN field in EntryLo begins at bit 12 this results in us shifting the most significant bit of the physical address beyond the end of the PTE, leading any mapped access to a physical address above 2GB to incorrectly access an address 2GB lower than intended. For now, disable the pte_special() support for MIPS32 configurations that support RiXi. Fixes: 61cbfff4b1a7 ("MIPS: pte_special()/pte_mkspecial() support") Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Dmitry Korotin <dkorotin@wavecomp.com> Cc: linux-mips@vger.kernel.org
* MIPS: Drop Loongson _CACHE_* definitionsPaul Burton2019-09-031-7/+0
| | | | | | | | | | | | | | | | | | | | | | | _CACHE_CACHABLE_NONCOHERENT is defined as 3<<_CACHE_SHIFT by default, so there's no need to define it as such specifically for Loongson. _CACHE_CACHABLE_COHERENT is not used anywhere in the kernel, so there's no need to define it at all. Finally the comment found alongside these definitions seems incorrect - it suggests that we're defining _CACHE_CACHABLE_NONCOHERENT such that it actually provides coherence, but the opposite seems to be true & instead the unused _CACHE_CACHABLE_COHERENT is defined as the typically incoherent value. Delete the whole thing, which will have no effect on the compiled code anyway. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@vger.kernel.org
* MIPS: Select R3k-style TLB in KconfigPaul Burton2019-09-031-3/+3
| | | | | | | | | | | | | Currently areas where we need to determine whether the TLB is R3k-style need to check for either of CONFIG_CPU_R3000 || CONFIG_CPU_TX39XX. Introduce a new CONFIG_CPU_R3K_TLB & select it from both of the above, allowing us to simplify checks for R3k-style TLBs by only checking for this new Kconfig option. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: linux-mips@vger.kernel.org
* MIPS: pte_special()/pte_mkspecial() supportDmitry Korotin2019-07-221-0/+5
| | | | | | | | | | | | Add support for pte_special() & pte_mkspecial(), replacing our previous stubs with functional implementations. Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com> [paul.burton@mips.com: - Fix for CONFIG_PHYS_ADDR_T_64BIT && CONFIG_CPU_MIPS32. - Rewrite commit message.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
* MIPS: Add partial 32-bit huge page supportDaniel Silsby2019-07-211-2/+2
| | | | | | | | | | | | | | | | | | This adds initial support for huge pages to 32-bit MIPS systems. Systems with extended addressing enabled (EVA,XPA,Alchemy/Netlogic) are not yet supported. With huge pages enabled, this implementation will increase page table memory overhead to match that of a 64-bit MIPS system. However, the cache-friendliness of page table walks is not affected significantly. Signed-off-by: Daniel Silsby <dansilsby@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: od@zcrc.me Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
* MIPS: Allow RIXI to be used on non-R2 or R6 coresFlorian Fainelli2016-05-131-4/+4
| | | | | | | | | | | | | | | | | | | | Some processors, like Broadcom's BMIPS4380 and BMIPS5000 support RIXI and the "rotr" instruction, which can be used to get a slightly more efficient page table layout. Introduce a CONFIG_CPU_HAS_RIXI such that those cores can benefit from this feature. Perform the conditional check updates where relevant. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12505/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: mm: Fix MIPS32 36b physical addressing (alchemy, netlogic)Paul Burton2016-05-131-4/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are 2 distinct cases in which a kernel for a MIPS32 CPU (CONFIG_CPU_MIPS32=y) may use 64 bit physical addresses (CONFIG_PHYS_ADDR_T_64BIT=y): - 36 bit physical addressing as used by RMI Alchemy & Netlogic XLP/XLR CPUs. - MIPS32r5 eXtended Physical Addressing (XPA). These 2 cases are distinct in that they require different behaviour from the kernel - the EntryLo registers have different formats. Until Linux v4.1 we only supported the first case, with code conditional upon the 2 aforementioned Kconfig variables being set. Commit c5b367835cfc ("MIPS: Add support for XPA.") added support for the second case, but did so by modifying the code that existed for the first case rather than treating the 2 cases as distinct. Since the EntryLo registers have different formats this breaks the 36 bit Alchemy/XLP/XLR case. Fix this by splitting the 2 cases, with XPA cases now being conditional upon CONFIG_XPA and the non-XPA case matching the code as it existed prior to commit c5b367835cfc ("MIPS: Add support for XPA."). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reported-by: Manuel Lauss <manuel.lauss@gmail.com> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Fixes: c5b367835cfc ("MIPS: Add support for XPA.") Cc: James Hogan <james.hogan@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13119/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: mm: Standardise on _PAGE_NO_READ, drop _PAGE_READPaul Burton2016-05-131-15/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Ever since support for RI/XI was implemented by commit 6dd9344cfc41 ("MIPS: Implement Read Inhibit/eXecute Inhibit") we've had a mixture of _PAGE_READ & _PAGE_NO_READ bits. Rather than keep both around, switch away from using _PAGE_READ to determine page presence & instead invert the use to _PAGE_NO_READ. Wherever we formerly had no definition for _PAGE_NO_READ, change what was _PAGE_READ to _PAGE_NO_READ. The end result is that we consistently use _PAGE_NO_READ to determine whether a page is readable, regardless of whether RI/XI is implemented. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Use enums to make asm/pgtable-bits.h readablePaul Burton2016-05-131-108/+81
| | | | | | | | | | | | | | | | | | | | | | | | | asm/pgtable-bits.h has grown to become an unreadable mess of #ifdef directives defining bits conditionally upon other bits all at the preprocessing stage, for no good reason. Instead of having quite so many #ifdef's, simply use enums to provide sequential numbering for bit shifts, without having to keep track manually of what the last bit defined was. Masks are defined separately, after the shifts, which allows for most of their definitions to be reused for all systems rather than duplicated. This patch is not intended to make any behavioural change to the code - all bits should be used in the same way they were before this patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13115/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Remove redundant asm/pgtable-bits.h inclusionsPaul Burton2016-05-131-2/+0
| | | | | | | | | | | | | | | | | | | | | | asm/pgtable-bits.h is included in 2 assembly files and thus has to ifdef around C code, however nothing defined by the header is used in either of the assembly files that include it. Remove the redundant inclusions such that asm/pgtable-bits.h doesn't need to #ifdef around C code, for cleanliness and in preparation for later patches which will add more C. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13114/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* mips, thp: remove infrastructure for handling splitting PMDsKirill A. Shutemov2016-01-161-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With new refcounting we don't need to mark PMDs splitting. Let's drop code to handle this. pmdp_splitting_flush() is not needed too: on splitting PMD we will do pmdp_clear_flush() + set_pte_at(). pmdp_clear_flush() will do IPI as needed for fast_gup. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch '4.2-fixes' into mips-for-linux-nextRalf Baechle2015-09-031-14/+9
|\
| * MIPS: pgtable-bits.h: Correct _PAGE_GLOBAL_SHIFT build failureMaciej W. Rozycki2015-08-301-14/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct a build failure introduced by be0c37c9 [MIPS: Rearrange PTE bits into fixed positions.]: In file included from ./arch/mips/include/asm/io.h:27:0, from ./arch/mips/include/asm/page.h:176, from include/linux/mm_types.h:15, from include/linux/sched.h:27, from include/linux/ptrace.h:5, from arch/mips/kernel/cpu-probe.c:16: ./arch/mips/include/asm/pgtable-bits.h:164:0: error: "_PAGE_GLOBAL_SHIFT" redefined [-Werror] #define _PAGE_GLOBAL_SHIFT (_PAGE_MODIFIED_SHIFT + 1) ^ ./arch/mips/include/asm/pgtable-bits.h:141:0: note: this is the location of the previous definition #define _PAGE_GLOBAL_SHIFT (_PAGE_SPLITTING_SHIFT + 1) ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/cpu-probe.o] Error 1 for 64BIT/CPU_MIPSR1/MIPS_HUGE_TLB_SUPPORT configurations. Remove the scattered double `_PAGE_NO_EXEC_SHIFT' and `_PAGE_GLOBAL_SHIFT' macro definitions and rearrange them so that the respective macros these definitions are based on are also those used for guarding conditionals. [ralf@linux-mips.org: resolved conflicts and updated commments.] Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: Use Ingenic-specific write combine attribute on all Ingenic platformsAlex Smith2015-09-031-1/+1
|/ | | | | | | | | | | The Ingenic-specific write combining cache attribute was defined based on CONFIG_MACH_JZ4740 and therefore not used on JZ4780. Change this to CONFIG_MACH_INGENIC so that it gets used on all Ingenic platforms. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10769/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: pgtable-bits: Fix XPA damage to R6 definitions.Markos Chandras2015-06-091-7/+7
| | | | | | | | | | | | | | | Commit be0c37c985ed ("MIPS: Rearrange PTE bits into fixed positions.") rearranged the PTE bits into fixed positions in preparation for the XPA support. However, this patch broke R6 since it only took R2 cores into consideration for the RI/XI bits leading to boot failures. We fix this by adding the missing CONFIG_CPU_MIPSR6 definitions Fixes: be0c37c985ed ("MIPS: Rearrange PTE bits into fixed positions.") Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10208/ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add support for XPA.Steven J. Hill2015-03-191-2/+11
| | | | | | | | | | | | | | | | | | Add support for extended physical addressing (XPA) so that 32-bit platforms can access equal to or greater than 40 bits of physical addresses. NOTE: 1) XPA and EVA are not the same and cannot be used simultaneously. 2) If you configure your kernel for XPA, the PTEs and all address sizes become 64-bit. 3) Your platform MUST have working HIGHMEM support. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9355/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Rearrange PTE bits into fixed positions.Steven J. Hill2015-03-181-28/+55
| | | | | | | | | | | | | | | | | | | | | | | This patch rearranges the PTE bits into fixed positions for R2 and later cores. In the past, the TLB handling code did runtime checking of RI/XI and adjusted the shifts and rotates in order to fit the largest PFN value into the PTE. The checking now occurs when building the TLB handler, thus eliminating those checks. These new arrangements also define the largest possible PFN value that can fit in the PTE. HUGE page support is only available for 64-bit cores. Layouts of the PTE bits are now: 64-bit, R1 or earlier: CCC D V G [S H] M A W R P 32-bit, R1 or earler: CCC D V G M A W R P 64-bit, R2 or later: CCC D V G RI/R XI [S H] M A W P 32-bit, R2 or later: CCC D V G RI/R XI M A W P [ralf@linux-mips.org: Fix another build error *rant* *rant*] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-02-221-51/+32
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
| * MIPS: Usage and cosmetic cleanups of page table bits.Steven J. Hill2015-02-191-60/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | * Clean up white spaces and tabs. * Get rid of remaining hardcoded values for calculating shifts and masks. * Get rid of redundant macro values. * Do not use page table bits directly in #ifdef's. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | mips: drop _PAGE_FILE and pte_file()-related helpersKirill A. Shutemov2015-02-101-9/+0
|/ | | | | | | | | | We've replaced remap_file_pages(2) implementation with emulation. Nobody creates non-linear mapping anymore. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MIPS: Cosmetic cleanups of page table headers.Steven J. Hill2014-11-241-15/+17
| | | | | | | | | | | | * Clean up white spaces and tabs. * Remove _PAGE_R4KBUG which is no longer used. * Get rid of hardcoded values and calculate shifts and masks where possible. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8457/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BITRalf Baechle2014-11-241-2/+2
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: pgtable-bits: Define the CCA bit for WC writes on Ingenic coresMarkos Chandras2014-09-221-0/+5
| | | | | | | | | Ingenic uses the CCA:1 bit to achieve write-combine memory writes. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7401/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: pgtable-bits: Move the CCA bits out of the core's ifdef blocksMarkos Chandras2014-09-221-16/+25
| | | | | | | | | | Define all the CCA bits outside the ifdef blocks for specific cores but also allow cores to override them if necessary. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7400/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Loongson: Add basic Loongson-3 definitionHuacai Chen2014-03-311-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loongson-3 is a multi-core MIPS family CPU, it support MIPS64R2 fully. Loongson-3 has the same IMP field (0x6300) as Loongson-2. Loongson-3 has a hardware-maintained cache, system software doesn't need to maintain coherency. Loongson-3A is the first revision of Loongson-3, and it is the quad- core version of Loongson-2G. Loongson-3A has a simplified version named Loongson-2Gq, the main difference between Loongson-3A/2Gq is 3A has two HyperTransport controller but 2Gq has only one. HT0 is used for cross- chip interconnection and HT1 is used to link PCI bus. Therefore, 2Gq cannot support NUMA but 3A can. For software, Loongson-2Gq is simply identified as Loongson-3A. Exsisting Loongson family CPUs: Loongson-1: Loongson-1A, Loongson-1B, they are 32-bit MIPS CPUs. Loongson-2: Loongson-2E, Loongson-2F, Loongson-2G, they are 64-bit single-core MIPS CPUs. Loongson-3: Loongson-3A(including so-called Loongson-2Gq), they are 64-bit multi-core MIPS CPUs. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6629/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Whitespace cleanup.Ralf Baechle2013-02-011-20/+20
| | | | | | | | Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Nuke trailing whitespace.Ralf Baechle2013-02-011-1/+1
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: PMC-Sierra Yosemite: Remove support.Ralf Baechle2012-12-131-14/+0
| | | | | | | Nobody seems to be interested anymore and upstream also never had an ethernet driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Transparent Huge Pages supportRalf Baechle2012-12-121-1/+10
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Control huge tlb support via Kconfig symbol MIPS_HUGE_TLB_SUPPORTDavid Daney2012-12-121-1/+1
| | | | | | | | We need Huge TLBs for HUGETLB_PAGE, or the soon to follow TRANSPARENT_HUGEPAGE. collect this information under a single Kconfig symbol. Signed-off-by: David Daney <david.daney@cavium.com>
* MIPS: tlbex: Better debug output.Ralf Baechle2012-11-261-35/+69
| | | | | | | | | | | | Pgtable bits are assigned dynamically depending on processor feature and statically based on kernel configuration. To make sense out of the disassembled TLB exception handlers a list of the actual assignments used for a particular configuration and hardware setup can be very useful. Output the actual TLB exception handlers in a format that simplifies their post processsing from dmesg output. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'.Steven J. Hill2012-09-141-9/+9
| | | | | | | | Remove usage of the 'kernel_uses_smartmips_rixi' macro from all files and use new 'cpu_has_rixi' instead. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: David Daney <david.daney@cavium.com>
* MIPS: Implement Read Inhibit/eXecute InhibitDavid Daney2010-02-271-15/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SmartMIPS ASE specifies how Read Inhibit (RI) and eXecute Inhibit (XI) bits in the page tables work. The upper two bits of EntryLo{0,1} are RI and XI when the feature is enabled in the PageGrain register. SmartMIPS only covers 32-bit systems. Cavium Octeon+ extends this to 64-bit systems by continuing to place the RI and XI bits in the top of EntryLo even when EntryLo is 64-bits wide. Because we need to carry the RI and XI bits in the PTE, the layout of the PTE is changed. There is a two instruction overhead in the TLB refill hot path to get the EntryLo bits into the proper position. Also the TLB load exception has to probe the TLB to check if RI or XI caused the exception. Also of note is that the layout of the PTE bits is done at compile and runtime rather than statically. In the 32-bit case this allows for the same number of PFN bits as before the patch as the _PAGE_HUGE is not supported in 32-bit kernels (we have _PAGE_NO_EXEC and _PAGE_NO_READ instead of _PAGE_READ and _PAGE_HUGE). The patch is tested on Cavium Octeon+, but should also work on 32-bit systems with the Smart-MIPS ASE. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/952/ Patchwork: http://patchwork.linux-mips.org/patch/956/ Patchwork: http://patchwork.linux-mips.org/patch/962/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add hugetlbfs page defines.David Daney2009-06-171-0/+1
| | | | | Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle2008-10-111-0/+137
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 06:53:37 +0100