summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel (follow)
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/32: fix build failure on book3e with KVMChristophe Leroy2019-06-152-3/+3
| | | | | | | | | | | | | | | | Build failure was introduced by the commit identified below, due to missed macro expension leading to wrong called function's name. arch/powerpc/kernel/head_fsl_booke.o: In function `SystemCall': arch/powerpc/kernel/head_fsl_booke.S:416: undefined reference to `kvmppc_handler_BOOKE_INTERRUPT_SYSCALL_SPRN_SRR1' Makefile:1052: recipe for target 'vmlinux' failed The called function should be kvmppc_handler_8_0x01B(). This patch fixes it. Reported-by: Paul Mackerras <paulus@ozlabs.org> Fixes: 1a4b739bbb4f ("powerpc/32: implement fast entry for syscalls on BOOKE") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/booke: fix fast syscall entry on SMPChristophe Leroy2019-06-151-3/+3
| | | | | | | | | Use r10 instead of r9 to calculate CPU offset as r9 contains the value from SRR1 which is used later. Fixes: 1a4b739bbb4f ("powerpc/32: implement fast entry for syscalls on BOOKE") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/32s: fix initial setup of segment registers on secondary CPUChristophe Leroy2019-06-151-0/+1
| | | | | | | | | | | | The patch referenced below moved the loading of segment registers out of load_up_mmu() in order to do it earlier in the boot sequence. However, the secondary CPU still needs it to be done when loading up the MMU. Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: 215b823707ce ("powerpc/32s: set up an early static hash table for KASAN") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTXChristophe Leroy2019-06-072-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | When booting through OF, setup_disp_bat() does nothing because disp_BAT are not set. By change, it used to work because BOOTX buffer is mapped 1:1 at address 0x81000000 by the bootloader, and btext_setup_display() sets virt addr same as phys addr. But since commit 215b823707ce ("powerpc/32s: set up an early static hash table for KASAN."), a temporary page table overrides the bootloader mapping. This 0x81000000 is also problematic with the newly implemented Kernel Userspace Access Protection (KUAP) because it is within user address space. This patch fixes those issues by properly setting disp_BAT through a call to btext_prepare_BAT(), allowing setup_disp_bat() to properly setup BAT3 for early bootx screen buffer access. Reported-by: Mathieu Malaterre <malat@debian.org> Fixes: 215b823707ce ("powerpc/32s: set up an early static hash table for KASAN.") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Fix kexec failure on book3s/32Christophe Leroy2019-06-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the old days, _PAGE_EXEC didn't exist on 6xx aka book3s/32. Therefore, allthough __mapin_ram_chunk() was already mapping kernel text with PAGE_KERNEL_TEXT and the rest with PAGE_KERNEL, the entire memory was executable. Part of the memory (first 512kbytes) was mapped with BATs instead of page table, but it was also entirely mapped as executable. In commit 385e89d5b20f ("powerpc/mm: add exec protection on powerpc 603"), we started adding exec protection to some 6xx, namely the 603, for pages mapped via pagetables. Then, in commit 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX"), the exec protection was extended to BAT mapped memory, so that really only the kernel text could be executed. The problem here is that kexec is based on copying some code into upper part of memory then executing it from there in order to install a fresh new kernel at its definitive location. However, the code is position independant and first part of it is just there to deactivate the MMU and jump to the second part. So it is possible to run this first part inplace instead of running the copy. Once the MMU is off, there is no protection anymore and the second part of the code will just run as before. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner2019-05-241-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier for missed filesThomas Gleixner2019-05-213-0/+3
| | | | | | | | | | | | | | | | | Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'akpm' (patches from Andrew)Linus Torvalds2019-05-191-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge yet more updates from Andrew Morton: "A few final bits: - large changes to vmalloc, yielding large performance benefits - tweak the console-flush-on-panic code - a few fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: panic: add an option to replay all the printk message in buffer initramfs: don't free a non-existent initrd fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro mm/vmalloc.c: keep track of free blocks for vmap allocation
| * panic: add an option to replay all the printk message in bufferFeng Tang2019-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently on panic, kernel will lower the loglevel and print out pending printk msg only with console_flush_on_panic(). Add an option for users to configure the "panic_print" to replay all dmesg in buffer, some of which they may have never seen due to the loglevel setting, which will help panic debugging . [feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()] Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com [feng.tang@intel.com: use logbuf lock to protect the console log index] Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'powerpc-5.2-2' of ↵Linus Torvalds2019-05-191-1/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix going back to stable, for a bug on 32-bit introduced when we added support for THREAD_INFO_IN_TASK. A fix for a typo in a recent rework of our hugetlb code that leads to crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE. Two fixes for our recent rework of the address layout on 64-bit hash CPUs, both only triggered when userspace tries to access addresses outside the user or kernel address ranges. Finally a fix for a recently introduced double free in an error path in our cacheinfo code. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C. Harding" * tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/cacheinfo: Remove double free powerpc/mm/hash: Fix get_region_id() for invalid addresses powerpc/mm: Drop VM_BUG_ON in get_region_id() powerpc/mm: Fix crashes with hugepages & 4K pages powerpc/32s: fix flush_hash_pages() on SMP
| * powerpc/cacheinfo: Remove double freeTobin C. Harding2019-05-171-1/+0
| | | | | | | | | | | | | | | | kfree() after kobject_put(). Who ever wrote this was on crack. Fixes: 7e8039795a80 ("powerpc/cacheinfo: Fix kobject memleak") Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2019-05-171-0/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more vfs mount updates from Al Viro: "Propagation of new syscalls to other architectures + cosmetic change from Christian (fscontext didn't follow the convention for anon inode names)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: Wire up the mount API syscalls on non-x86 arches [ver #2] uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2] uapi, fsopen: use square brackets around "fscontext" [ver #2]
| * | uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]David Howells2019-05-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Wire up the mount API syscalls on non-x86 arches. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | powerpc: replace CONFIG_DEBUG_KERNEL with CONFIG_DEBUG_MISCSinan Kaya2019-05-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_DEBUG_KERNEL should not impact code generation. Use the newly defined CONFIG_DEBUG_MISC instead to keep the current code. Link: http://lkml.kernel.org/r/20190413224438.10802-3-okaya@kernel.org Signed-off-by: Sinan Kaya <okaya@kernel.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Florian Westphal <fw@strlen.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | powerpc/prom_init: mark prom_getprop() and prom_getproplen() as __initMasahiro Yamada2019-05-151-3/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common place. We need to eliminate potential issues beforehand. If it is enabled for powerpc, the following modpost warnings are reported: WARNING: vmlinux.o(.text.unlikely+0x20): Section mismatch in reference from the function .prom_getprop() to the function .init.text:.call_prom() The function .prom_getprop() references the function __init .call_prom(). This is often because .prom_getprop lacks a __init annotation or the annotation of .call_prom is wrong. WARNING: vmlinux.o(.text.unlikely+0x3c): Section mismatch in reference from the function .prom_getproplen() to the function .init.text:.call_prom() The function .prom_getproplen() references the function __init .call_prom(). This is often because .prom_getproplen lacks a __init annotation or the annotation of .call_prom is wrong. Link: http://lkml.kernel.org/r/20190423034959.13525-9-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'powerpc-5.2-1' of ↵Linus Torvalds2019-05-1040-1878/+1512
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly delayed due to the issue with printk() calling probe_kernel_read() interacting with our new user access prevention stuff, but all fixed now. The only out-of-area changes are the addition of a cpuhp_state, small additions to Documentation and MAINTAINERS updates. Highlights: - Support for Kernel Userspace Access/Execution Prevention (like SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents the kernel from accidentally accessing userspace outside copy_to/from_user(), or ever executing userspace. - KASAN support on 32-bit. - Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to use the same address ranges we use with the Radix MMU. - A rewrite into C of large parts of our idle handling code for 64-bit Book3S (ie. power8 & power9). - A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup in the null_syscall benchmark. - On 64-bit bare metal we have support for recovering from errors with the time base (our clocksource), however if that fails currently we hang in __delay() and never crash. We now have support for detecting that case and short circuiting __delay() so we at least panic() and reboot. - Add support for optionally enabling the DAWR on Power9, which had to be disabled by default due to a hardware erratum. This has the effect of enabling hardware breakpoints for GDB, the downside is a badly behaved program could crash the machine by pointing the DAWR at cache inhibited memory. This is opt-in obviously. - xmon, our crash handler, gets support for a read only mode where operations that could change memory or otherwise disturb the system are disabled. Plus many clean-ups, reworks and minor fixes etc. Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater, Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson, Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman, Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith, Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler, Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing" * tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits) powerpc/64s: Use early_mmu_has_feature() in set_kuap() powerpc/book3s/64: check for NULL pointer in pgd_alloc() powerpc/mm: Fix hugetlb page initialization ocxl: Fix return value check in afu_ioctl() powerpc/mm: fix section mismatch for setup_kup() powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile powerpc/mm: Fix makefile for KASAN powerpc/kasan: add missing/lost Makefile selftests/powerpc: Add a signal fuzzer selftest powerpc/booke64: set RI in default MSR ocxl: Provide global MMIO accessors for external drivers ocxl: move event_fd handling to frontend ocxl: afu_irq only deals with IRQ IDs, not offsets ocxl: Allow external drivers to use OpenCAPI contexts ocxl: Create a clear delineation between ocxl backend & frontend ocxl: Don't pass pci_dev around ocxl: Split pci.c ocxl: Remove some unused exported symbols ocxl: Remove superfluous 'extern' from headers ocxl: read_pasid never returns an error, so make it void ...
| * powerpc/hmi: Fix kernel hang when TB is in error state.Mahesh Salgaonkar2019-05-021-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | On TOD/TB errors timebase register stops/freezes until HMI error recovery gets TOD/TB back into running state. On successful recovery, TB starts running again and udelay() that relies on TB value continues to function properly. But in case when HMI fails to recover from TOD/TB errors, the TB register stay freezed. With TB not running the __delay() function keeps looping and never return. If __delay() is called while in panic path then system hangs and never reboots after panic. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/entry: Remove unneeded need_resched() loopValentin Schneider2019-05-022-11/+2
| | | | | | | | | | | | | | | | | | | | Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> [mpe: Rebase since CURRENT_THREAD_INFO() removal] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/prom_init: get rid of PROM_SCRATCH_SIZEChristophe Leroy2019-05-021-11/+9
| | | | | | | | | | | | | | PROM_SCRATCH_SIZE is same as sizeof(prom_scratch) Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/security: Show powerpc_security_features in debugfsMichael Ellerman2019-05-021-0/+8
| | | | | | | | | | | | | | | | | | | | This can be helpful for debugging problems with the security feature flags, especially on guests where the flags come from the hypervisor via an hcall and so can't be observed in the device tree. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/64: Don't trace code that runs with the soft irq mask unreconciledNicholas Piggin2019-05-024-13/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "Reconciling" in terms of interrupt handling, is to bring the soft irq mask state in to synch with the hardware, after an interrupt causes MSR[EE] to be cleared (while the soft mask may be enabled, and hard irqs not marked disabled). General kernel code should not be called while unreconciled, because local_irq_disable, etc. manipulations can cause surprising irq traces, and it's fragile because the soft irq code does not really expect to be called in this situation. When exiting from an interrupt, MSR[EE] is cleared to prevent races, but soft irq state is enabled for the returned-to context, so this is now an unreconciled state. restore_math is called in this state, and that can be ftraced, and the ftrace subsystem disables local irqs. Mark restore_math and its callees as notrace. Restore a sanity check in the soft irq code that had to be disabled for this case, by commit 4da1f79227ad4 ("powerpc/64: Disable irq restore warning for now"). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/irq: drop __irq_offset_valueChristophe Leroy2019-05-021-3/+0
| | | | | | | | | | | | | | | | | | | | | | This patch drops__irq_offset_value which has not been used since commit 9c4cb8251513 ("powerpc: Remove use of CONFIG_PPC_MERGE") This removes a sparse warning. Fixes: 9c4cb8251513 ("powerpc: Remove use of CONFIG_PPC_MERGE") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/setup: replace ifdefs by IS_ENABLED() wherever possible.Christophe Leroy2019-05-021-21/+18
| | | | | | | | | | | | | | | | Compared to ifdefs, IS_ENABLED() provide a cleaner code and allows to detect compilation failure regardless of the selected options. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/setup: cleanup the #ifdef CONFIG_TAU blockChristophe Leroy2019-05-021-12/+12
| | | | | | | | | | | | | | | | | | Use cpu_has_feature() instead of opencoding Use IS_ENABLED() instead of #ifdef for CONFIG_TAU_AVERAGE Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/setup: cleanup ifdef mess in check_cache_coherency()Christophe Leroy2019-05-021-7/+3
| | | | | | | | | | | | | | Use IS_ENABLED() instead of #ifdefs Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/setup: Remove unnecessary #ifdef CONFIG_ALTIVECChristophe Leroy2019-05-021-2/+0
| | | | | | | | | | | | | | | | CPU_FTR_ALTIVEC is only set when CONFIG_ALTIVEC is selected, so the ifdef is unnecessary. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/mm: define an empty mm_iommu_init()Christophe Leroy2019-05-021-2/+0
| | | | | | | | | | | | | | | | To avoid ifdefs, define a empty static inline mm_iommu_init() function when CONFIG_SPAPR_TCE_IOMMU is not selected. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/fadump: define an empty fadump_cleanup()Christophe Leroy2019-05-021-2/+0
| | | | | | | | | | | | | | | | To avoid #ifdefs, define an static inline fadump_cleanup() function when CONFIG_FADUMP is not selected Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: Don't add dummy frames when calling trace_hardirqs_on/offChristophe Leroy2019-05-021-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to add dummy frames when calling trace_hardirqs_on or trace_hardirqs_off. GCC properly handles empty stacks. In addition, powerpc doesn't set CONFIG_FRAME_POINTER, therefore __builtin_return_address(1..) returns NULL at all time. So the dummy frames are definitely unneeded here. In the meantime, avoid reading memory for loading r1 with a value we already know. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: don't do syscall stuff in transfer_to_handlerChristophe Leroy2019-05-021-19/+0
| | | | | | | | | | | | | | | | As syscalls are now handled via a fast entry path, syscall related actions can be removed from the generic transfer_to_handler path. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: implement fast entry for syscalls on BOOKEChristophe Leroy2019-05-024-16/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a fast entry for syscalls. Syscalls don't have to preserve non volatile registers except LR. This patch then implement a fast entry for syscalls, where volatile registers get clobbered. As this entry is dedicated to syscall it always sets MSR_EE and warns in case MSR_EE was previously off It also assumes that the call is always from user, system calls are unexpected from kernel. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: implement fast entry for syscalls on non BOOKEChristophe Leroy2019-05-025-10/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a fast entry for syscalls. Syscalls don't have to preserve non volatile registers except LR. This patch then implement a fast entry for syscalls, where volatile registers get clobbered. As this entry is dedicated to syscall it always sets MSR_EE and warns in case MSR_EE was previously off It also assumes that the call is always from user, system calls are unexpected from kernel. The overall series improves null_syscall selftest by 12,5% on an 83xx and by 17% on a 8xx. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc: Fix 32-bit handling of MSR_EE on exceptionsChristophe Leroy2019-05-021-49/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [text mostly copied from benh's RFC/WIP] ppc32 are still doing something rather gothic and wrong on 32-bit which we stopped doing on 64-bit a while ago. We have that thing where some handlers "copy" the EE value from the original stack frame into the new MSR before transferring to the handler. Thus for a number of exceptions, we enter the handlers with interrupts enabled. This is rather fishy, some of the stuff that handlers might do early on such as irq_enter/exit or user_exit, context tracking, etc... should be run with interrupts off afaik. Generally our handlers know when to re-enable interrupts if needed. The problem we were having is that we assumed these interrupts would return with interrupts enabled. However that isn't the case. Instead, this patch changes things so that we always enter exception handlers with interrupts *off* with the notable exception of syscalls which are special (and get a fast path). Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: get rid of COPY_EE in exception entryChristophe Leroy2019-05-023-27/+15
| | | | | | | | | | | | | | | | | | | | | | | | EXC_XFER_TEMPLATE() is not called with COPY_EE anymore so we can get rid of copyee parameters and related COPY_EE and NOCOPY macros. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [splited out from benh RFC patch] Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: Enter exceptions with MSR_EE unsetChristophe Leroy2019-05-027-106/+90
| | | | | | | | | | | | | | | | | | | | | | | | All exceptions handlers know when to reenable interrupts, so it is safer to enter all of them with MSR_EE unset, except for syscalls. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [splited out from benh RFC patch] Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: enter syscall with MSR_EE inconditionaly setChristophe Leroy2019-05-027-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | syscalls are expected to be entered with MSR_EE set. Lets make it inconditional by forcing MSR_EE on syscalls. This patch adds EXC_XFER_SYS for that. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [splited out from benh RFC patch] Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/fsl_booke: ensure SPEFloatingPointException() reenables interruptsChristophe Leroy2019-05-021-0/+8
| | | | | | | | | | | | | | | | | | SPEFloatingPointException() is the only exception handler which 'forgets' to re-enable interrupts. This patch makes sure it does. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/40x: Refactor exception entry macros by using head_32.hChristophe Leroy2019-05-022-86/+6
| | | | | | | | | | | | | | Refactor exception entry macros by using the ones defined in head_32.h Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/40x: Split and rename NORMAL_EXCEPTION_PROLOGChristophe Leroy2019-05-021-10/+16
| | | | | | | | | | | | | | | | | | This patch splits NORMAL_EXCEPTION_PROLOG in the same way as in head_8xx.S and head_32.S and renames it EXCEPTION_PROLOG() as well to match head_32.h Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/40x: add exception frame markerChristophe Leroy2019-05-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds STACK_FRAME_REGS_MARKER in the stack at exception entry in order to see interrupts in call traces as below: [ 0.013964] Call Trace: [ 0.014014] [c0745db0] [c007a9d4] tick_periodic.constprop.5+0xd8/0x104 (unreliable) [ 0.014086] [c0745dc0] [c007aa20] tick_handle_periodic+0x20/0x9c [ 0.014181] [c0745de0] [c0009cd0] timer_interrupt+0xa0/0x264 [ 0.014258] [c0745e10] [c000e484] ret_from_except+0x0/0x14 [ 0.014390] --- interrupt: 901 at console_unlock.part.7+0x3f4/0x528 [ 0.014390] LR = console_unlock.part.7+0x3f0/0x528 [ 0.014455] [c0745ee0] [c0050334] console_unlock.part.7+0x114/0x528 (unreliable) [ 0.014542] [c0745f30] [c00524e0] register_console+0x3d8/0x44c [ 0.014625] [c0745f60] [c0675aac] cpm_uart_console_init+0x18/0x2c [ 0.014709] [c0745f70] [c06614f4] console_init+0x114/0x1cc [ 0.014795] [c0745fb0] [c0658b68] start_kernel+0x300/0x3d8 [ 0.014864] [c0745ff0] [c00022cc] start_here+0x44/0x98 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/40x: Don't use SPRN_SPRG_SCRATCH2 in EXCEPTION_PROLOGChristophe Leroy2019-05-021-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike said in the comment, r1 is not reused by the critical exception handler, as it uses a dedicated critirq_ctx stack. Decrementing r1 early is then unneeded. Should the above be valid, the code is crap buggy anyway as r1 gets some intermediate values that would jeopardise the whole process (for instance after mfspr r1,SPRN_SPRG_THREAD) Using SPRN_SPRG_SCRATCH2 to save r1 is then not needed, r11 can be used instead. This avoids one mtspr and one mfspr and makes the prolog closer to what's done on 6xx and 8xx. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: make the 6xx/8xx EXC_XFER_TEMPLATE() similar to the 40x/booke oneChristophe Leroy2019-05-021-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | 6xx/8xx EXC_XFER_TEMPLATE() macro adds a i##n symbol which is unused and can be removed. 40x and booke EXC_XFER_TEMPLATE() macros takes msr from the caller while the 6xx/8xx version uses only MSR_KERNEL as msr value. This patch modifies the 6xx/8xx version to make it similar to the 40x and booke versions. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: move LOAD_MSR_KERNEL() into head_32.h and use itChristophe Leroy2019-05-022-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | As preparation for using head_32.h for head_40x.S, move LOAD_MSR_KERNEL() there and use it to load r10 with MSR_KERNEL value. In the mean time, this patch modifies it so that it takes into account the size of the passed value to determine if 'li' can be used or if 'lis/ori' is needed instead of using the size of MSR_KERNEL. This is done by using gas macro. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: Refactor EXCEPTION entry macros for head_8xx.S and head_32.SChristophe Leroy2019-05-023-193/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S This patch creates head_32.h and moves EXCEPTION_PROLOG macro into it. It also converts it from a GCC macro to a GAS macro in order to ease refactorisation with 40x later, since GAS macros allows the use of #ifdef/#else/#endif inside it. And it also has the advantage of not requiring the uggly "; \" at the end of each line. This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which are also similar while adding START_EXCEPTION() out of EXCEPTION(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/mm: print hash info in a helperChristophe Leroy2019-05-021-21/+1
| | | | | | | | | | | | | | | | | | | | | | Reduce #ifdef mess by defining a helper to print hash info at startup. In the meantime, remove the display of hash table address to reduce leak of non necessary information. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32s: set up an early static hash table for KASAN.Christophe Leroy2019-05-021-25/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KASAN requires early activation of hash table, before memblock() functions are available. This patch implements an early hash_table statically defined in __initdata. During early boot, a single page table is used. For hash32, when doing the final init, one page table is allocated for each PGD entry because of the _PAGE_HASHPTE flag which can't be common to several virt pages. This is done after memblock get available but before switching to the final hash table, otherwise there are issues with TLB flushing due to the shared entries. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32s: move hash code patching out of MMU_init_hw()Christophe Leroy2019-05-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | For KASAN, hash table handling will be activated early for accessing to KASAN shadow areas. In order to avoid any modification of the hash functions while they are still used with the early hash table, the code patching is moved out of MMU_init_hw() and put close to the big-bang switch to the final hash table. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: Add KASAN supportChristophe Leroy2019-05-026-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds KASAN support for PPC32. The following patch will add an early activation of hash table for book3s. Until then, a warning will be raised if trying to use KASAN on an hash 6xx. To support KASAN, this patch initialises that MMU mapings for accessing to the KASAN shadow area defined in a previous patch. An early mapping is set as soon as the kernel code has been relocated at its definitive place. Then the definitive mapping is set once paging is initialised. For modules, the shadow area is allocated at module_alloc(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc: disable KASAN instrumentation on early/critical files.Christophe Leroy2019-05-021-0/+12
| | | | | | | | | | | | | | | | | | | | | | All files containing functions run before kasan_early_init() is called must have KASAN instrumentation disabled. For those file, branch profiling also have to be disabled otherwise each if () generates a call to ftrace_likely_update(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc/32: use memset() instead of memset_io() to zero BSSChristophe Leroy2019-05-021-2/+2
| | | | | | | | | | | | | | | | | | | | Since commit 400c47d81ca38 ("powerpc32: memset: only use dcbz once cache is enabled"), memset() can be used before activation of the cache, so no need to use memset_io() for zeroing the BSS. Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 23:18:39 +0100