summaryrefslogtreecommitdiffstats
path: root/arch/powerpc (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [POWERPC] ptrace shouldn't touch FP exec modeBenjamin Herrenschmidt2007-06-144-94/+39
| | | | | | | | | | | | | | | | One of the gratuitous difference between 32 and 64-bit ptrace is whether you can whack the MSR:FE0 and FE1 bits from ptrace. This patch forbids it unconditionally. In addition, the 64-bit kernels used to return the exception mode in the MSR on reads, but 32-bit kernels didn't. This patch makes it return those bits on both. Finally, since ptrace-ppc32.h and ptrace-ppc64.h are mostly empty now, and since the previous patch made ptrace32.c no longer need the MSR_DEBUGCHANGE definition, we just remove those 2 files and move back the remaining bits to ptrace.c (they were short lived heh ?). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Allow ptrace write to pt_regs trap and orig_r3Benjamin Herrenschmidt2007-06-142-16/+20
| | | | | | | | | | | | | | | | This patch allows a ptracer to write to the "trap" and "orig_r3" words of the pt_regs. This, along with a subsequent patch to the signal restart code, should enable gdb to properly handle syscall restarting after executing a separate function (at least when there's no restart block). This patch also removes ptrace32.c code toying directly with the registers and makes it use the ptrace_get/put_reg() accessors for everything so that the logic for checking what is permitted is in only one place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove some useless ifdef's in ptraceBenjamin Herrenschmidt2007-06-141-4/+0
| | | | | | | | CHECK_FULL_REGS() exist on both 32 and 64 bits, so there's no need to make it conditional on CONFIG_PPC32. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Uninline common ptrace bitsBenjamin Herrenschmidt2007-06-144-254/+232
| | | | | | | | | This folds back the ptrace-common.h bits back into ptrace.c and removes that file. The FSL SPE bits from ptrace-ppc32.h are folded back in as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] ptrace updates & new, better requestsBenjamin Herrenschmidt2007-06-143-166/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] ptrace cleanupsBenjamin Herrenschmidt2007-06-145-242/+197
| | | | | | | | | | | | | | | The powerpc ptrace code has some weirdness, like a ptrace-common.h file that is actually ppc64 only and some of the 32 bits code ifdef'ed inside ptrace.c. There are also separate implementations for things like get/set_vrregs for 32 and 64 bits which is totally unnecessary. This patch cleans that up a bit by having a ptrace-common.h which contains really common code (and makes a lot more code common), and ptrace-ppc32.h and ptrace-ppc64.h files that contain the few remaining different bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Disable broken PPC_PTRACE_GETFPREGS on 32 bitsBenjamin Herrenschmidt2007-06-141-0/+2
| | | | | | | | | | The handling of PPC_PTRACE_GETFPREGS is broken on 32 bits kernel, it will only return half of the registers. Since that call didn't initially exist for 32 bits kernel (added recently), rather than fixing it, let's just remove it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Add a "capabilities" file to spu contextsBenjamin Herrenschmidt2007-06-141-0/+27
| | | | | | | | | | | This adds a "capabilities" file to spu contexts consisting of a list of linefeed separated capability names. The current exposed capabilities are "sched" (the context is scheduleable) and "step" (the context supports single stepping). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Add support for SPU single steppingBenjamin Herrenschmidt2007-06-141-1/+11
| | | | | | | | | | | | This patch adds support for SPU single stepping. The single step bit is set in the SPU when the current process is being single-stepped via ptrace. The spu then stops and returns with a specific flag set and the syscall exit code will generate the SIGTRAP. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt2007-06-1417-819/+514
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] unmap_vm_area becomes unmap_kernel_range for the publicBenjamin Herrenschmidt2007-06-142-2/+2
| | | | | | | | | | | | | | | | This makes unmap_vm_area static and a wrapper around a new exported unmap_kernel_range that takes an explicit range instead of a vm_area struct. This makes it more versatile for code that wants to play with kernel page tables outside of the standard vmalloc area. (One example is some rework of the PowerPC PCI IO space mapping code that depends on that patch and removes some code duplication and horrible abuse of forged struct vm_struct). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Tweak EEH copyright infoLinas Vepstas2007-06-143-5/+10
| | | | | | | | | | | | | | Twiddle the copyright notices. Per current guidelines, the use of the (C) or (c) in source code is deprecated. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 6 +++++- arch/powerpc/platforms/pseries/eeh_cache.c | 3 ++- arch/powerpc/platforms/pseries/eeh_driver.c | 6 +++--- 3 files changed, 10 insertions(+), 5 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove dead EEH codeLinas Vepstas2007-06-141-3/+1
| | | | | | | | | | | Remove some dead code. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Show EEH per-device false positivesLinas Vepstas2007-06-142-0/+8
| | | | | | | | | | | | | | | Track and report the number of times we read an all-1s value (0xff, 0xffff or 0xffffffff) from each device which is valid data, not indicating EEH isolation. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 5 +++++ arch/powerpc/platforms/pseries/eeh_sysfs.c | 3 +++ include/asm-powerpc/pci-bridge.h | 1 + 3 files changed, 9 insertions(+) Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add EEH sysfs blinkenlightsLinas Vepstas2007-06-145-4/+95
| | | | | | | | | | | | | | | | | | Add sysfs blinkenlights for EEH statistics. Shuffle the eeh_add_device_tree() call so that it appears in the correct sequence. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/eeh.c | 4 + arch/powerpc/platforms/pseries/eeh_cache.c | 2 arch/powerpc/platforms/pseries/eeh_sysfs.c | 84 +++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pci_dlpar.c | 7 +- include/asm-powerpc/ppc-pci.h | 3 + 6 files changed, 98 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Move common code out of if/elseJon Tollefson2007-06-141-2/+1
| | | | | | | | | | | Move common code out of if/else. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> ---- hash_native_64.c | 3 +-- 1 files changed, 1 insertion(+), 2 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix VDSO compile warningSegher Boessenkool2007-06-141-1/+1
| | | | | | | | Maybe the type should have been char[] instead of __u8[] in the first place, but this will do. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix console output getting dropped on platforms without udbg_putcMilton Miller2007-06-141-1/+7
| | | | | | | | | | | | | | | | | | Previously, registering this early console would just result in dropping early buffered printk output until a udbg_putc was registered. However, commit 69331af79cf29e26d1231152a172a1a10c2df511 clears the CON_PRINTBUFFER flag on the main console when a CON_BOOT (early) console has been registered, resulting in the buffered messages never being displayed to the user. This fixes the problem by making sure we don't register udbg_console on platforms that don't implement udbg_putc. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix per-cpu allocation on oldworld SMP powermacsPaul Mackerras2007-06-142-2/+12
| | | | | | | | | | | | The per-cpu area(a) for the secondary CPU(s) isn't getting allocated on old SMP powermacs that don't have the secondary CPU(s) listed in the device tree, as per-cpu areas are now only allocated for CPUs in the cpu_possible_map, and we aren't setting the bits for the secondary CPU(s) until smp_prepare_cpus(), which is after per-cpu allocation. Therefore this sets the bits for CPUs 1..3 in cpu_possible_map in pmac_setup_arch, so they get per-cpu data allocated. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix building of COFF zImagesPaul Mackerras2007-06-071-0/+1
| | | | | | | | | The COFF zImage (for booting oldworld powermacs) wasn't being built correctly because the procedure descriptor in crt0.S for the zImage entry point wasn't declared as .globl, and therefore wasn't getting pulled in from wrapper.a by the linker. This adds the necessary .globl statement. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Fix error handling in spufs_fill_dir()Sebastian Siewior2007-06-071-2/+15
| | | | | | | | | | | | | The error path in spufs_fill_dir() is broken. If d_alloc_name() or spufs_new_file() fails, spufs_prune_dir() is getting called. At this time dir->inode is not set and a NULL pointer is dereferenced by mutex_lock(). This bugfix replaces spufs_prune_dir() with a shorter version that does not touch dir->inode but simply removes all children. Signed-off-by: Sebastian Siewior <bigeasy@linux.vnet.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Don't yield nosched contextChristoph Hellwig2007-06-071-3/+5
| | | | | | | | | Nosched context sould never be scheduled out, thus we must not deactivate them in spu_yield ever. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] scc_sio: Fix link failureChristoph Hellwig2007-06-071-1/+1
| | | | | | | | | | | scc_sio.o should only be built if the txx9 serial driver is actually built into the kernel. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> -- Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] cbe_cpufreq: Limit frequency via cpufreq notifier chainThomas Renninger2007-06-071-6/+27
| | | | | | | | | | ... and get rid of cpufreq_set_policy call that caused a build failure due interfering commits. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix pci_setup_phb_io_dynamic for pci_iomapArnd Bergmann2007-06-071-1/+1
| | | | | | | | | | | | | We had a problem on a system with only dynamically allocated PCI buses (using of_pci_phb_driver) in combination with libata. This setup ended up having no "primary" phb, which means that pci_io_base never got initialized and all IO port numbers are 64 bit numbers, which is larger than the PIO_MASK limit. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs scheduler: Fix wakeup racesChristoph Hellwig2007-06-071-82/+77
| | | | | | | | | | | | | | | | | | | | Fix the race between checking for contexts on the runqueue and actually waking them in spu_deactive and spu_yield. The guts of spu_reschedule are split into a new helper called grab_runnable_context which shows if there is a runnable thread below a specified priority and if yes removes if from the runqueue and uses it. This function is used by the new __spu_deactivate hepler shared by preemption and spu_yield to grab a new context before deactivating a specified priority and if yes removes if from the runqueue and uses it. This function is used by the new __spu_deactivate hepler shared by preemption and spu_yield to grab a new context before deactivating the old one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Synchronize pte invalidation vs ps closeChristoph Hellwig2007-06-073-30/+32
| | | | | | | | | | | | | Make sure the mapping_lock also protects access to the various address_space pointers used for tearing down the ptes on a spu context switch. Because unmap_mapping_range can sleep we need to turn mapping_lock from a spinlock into a sleeping mutex. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Free mm if spufs_fill_dir() failedSebastian Siewior2007-06-071-0/+1
| | | | | | | | | | In case spufs_fill_dir() fails only put_spu_context() gets called for cleanup and the acquired mm_struct never gets freed. Signed-off-by: Sebastian Siewior <bigeasy@linux.vnet.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Fix gang destroy leaksJeremy Kerr2007-06-071-35/+5
| | | | | | | | | | | | | | | Previously, closing a SPE gang that still has contexts would trigger a WARN_ON, and leak the allocated gang. This change fixes the problem by using the gang's reference counts to destroy the gang instead. The gangs will persist until their last reference (be it context or open file handle) is gone. Also, avoid using statements with side-effects in a WARN_ON(). Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Hook up spufs_release_memChristoph Hellwig2007-06-071-0/+1
| | | | | | | | | Currently spufs_mem_release and the mem file doesn't have any release method hooked up, leading to leaks everytime is used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: Refuse to load the module when not running on cellArnd Bergmann2007-06-071-0/+4
| | | | | | | | | | | | | As noticed by David Woodhouse, it's currently possible to mount spufs on any machine, which means that it actually will get mounted by fedora. This refuses to load the module on platforms that have no support for SPUs. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] pasemi: Fix iommu + 64K PAGE_SIZE bugOlof Johansson2007-06-071-8/+0
| | | | | | | | | The powerpc iommu code was refactored by Linas back in the 2.6.20 time frame to map 4K pages from the generic code, but I had forgotten to go back and fix my platform driver before submitting it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix zImage.coff generation for 32-bit pmacMilton Miller2007-06-021-2/+2
| | | | | | | | | | | Commit 9da82a6dee9db4cd5ae7a74ab4f51afb52b6efb9 inadvertently removed the platform override for zImage.coff to be generated with pmaccoff. Rather than add a special makefile rule, change the platform for which the wrapper platform uses the special rules. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Compare irq numbers with NO_IRQ not IRQ_NONEMichael Ellerman2007-06-021-3/+3
| | | | | | | | | | | | | There is a thinko in the irq code, it uses IRQ_NONE to indicate no irq, whereas it should be using NO_IRQ. IRQ_NONE is returned from irq handlers to say "not handled". As it happens they currently have the same value (0), so this is just for future proof-ness. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix compile warning in pseries xics codeMichael Neuling2007-06-021-4/+6
| | | | | | | | In 616883df78bd4b3fcdb6ddc39bd3d4cb902bfa32 request_irq was marked as __must_check so we must... er... check it. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Don't use HOSTCFLAGS in BOOTCFLAGSDavid Gibson2007-06-021-8/+6
| | | | | | | | | | | | | | | | | | | In the bootwrapper code for powerpc, we include HOSTCFLAGS into the BOOTCFLAGS used for building the zImage wrapper code. Since the wrapper code is not host code, this makes no sense. This patch removes the use of HOSTCFLAGS here, instead including directly into BOOTCFLAGS those flags from the normal kernel CFLAGS which also make sense in the bootwrapper code. In particular, this makes the bootwrapper use -msoft-float, preventing the compiler from generating floating point instructions. Previously, under some circumstances the compiler could generate floating point instructions in the bootwrapper which would cause exceptions on embedded CPUS which don't have floating point support. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Create a zImage for legacy iSeriesStephen Rothwell2007-06-022-1/+4
| | | | | | | | | | | This zImage is really just the stripped vmlinux, but it means that there is one less special case for iSeries and also that the zImages will be built for a combined kernel build that happens to include iSeries. This zImage boots fine on legacy iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] pasemi idle uses hard_smp_processor_idStephen Rothwell2007-06-021-0/+1
| | | | | | | | and so needs to include asm/smp.h so a UP build works. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] ps3/interrupt.c uses get_hard_smp_processor_idStephen Rothwell2007-06-021-0/+1
| | | | | | | | and so needs to include asm/smp.h for a UP build to work. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix compiler/assembler flags for Ebony platform boot filesDavid Gibson2007-06-021-2/+2
| | | | | | | | | | | | | The recent addition of assembler flags for 44x.c and ebony.c in the bootwrapper to make them compile on certain toolchains was not correct and could break other platforms. This patch switches to using a compiler flag instead, which implies the appropriate assembler flag, and also stops the compiler itself generating instructions which are invalid for the platform in question. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix ppc32 single-stepping out of syscallsBenjamin Herrenschmidt2007-06-021-0/+2
| | | | | | | | | | | | | The ppc32 kernel didn't properly set/clear the TIF_SINGLESTEP flag, causing return from syscalls to not SIGTRAP, thus executing one more instruction before stopping again. This fixes it. The ptrace code is a bit of a mess, and is overdue for at least a -proper- 32/64 bits split and possibly more cleanups but this minimum fix should be ok for 2.6.22 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Update documentation for of_find_node_by_type()Michael Ellerman2007-06-021-5/+6
| | | | | | | | | | The documentation for of_find_node_by_type() incorrectly refers to the "name" parameter - it should be "type". Also the behaviour when from == NULL is not really documented, fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix Kconfig warningKumar Gala2007-05-231-0/+1
| | | | | | | | Fix config warning related to select usage: drivers/macintosh/Kconfig:117:warning: 'select' used by config symbol 'PMAC_APM_EMU' refers to undefined symbol 'SYS_SUPPORTS_APM_EMULATION' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix modpost warningKumar Gala2007-05-231-1/+1
| | | | | | | | Mark pte_alloc_one_kernel as __init_refok to fix the following warning: WARNING: arch/powerpc/mm/built-in.o(.text+0x1068): Section mismatch: reference to .init.text:early_get_page (between 'pte_alloc_one_kernel' and 'steal_context') Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix Section mismatch warningsLi Yang2007-05-232-2/+2
| | | | | | | | | | | This patch fix the following Section mismatch warnings in powerpc code. WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.data:mv643xx_eth_pd_devs from .text between 'mv643xx_eth_add_pds' (at offset 0x9ed2) and 'gg2_read_config' WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.data:mv643xx_eth_pd_devs from .text between 'mv643xx_eth_add_pds' (at offset 0x9ed6) and 'gg2_read_config' WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.text:note_scsi_host from __ksymtab between '__ksymtab_note_scsi_host' (at offset 0x8) and '__ksymtab_sys_ctrler' Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] QE: fix Kconfig 'select' warning with UCC_FASTTimur Tabi2007-05-231-3/+1
| | | | | | | | | | | The UCC_GETH Kconfig option in drivers/net/Kconfig had a line to select the UCC_FAST option is arch/powerpc/sysdev/qe_lib/Kconfig, which is only used on PowerPC builds. On other architectures, this would generated a warning. The fix is to have UCC_FAST depend on UCC_GETH. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 52xx: unbreak lite5200 dts (_pic vs. -pic)Domen Puncer2007-05-232-2/+2
| | | | | | | | | Unbreak lite5200 dts, which were broken by 5c1992f83304cf2d56934dd6c06709b96e1b0c81 Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix warning in 32-bit builds with CONFIG_HIGHMEMBenjamin Herrenschmidt2007-05-221-4/+5
| | | | | | | Some missing fixup for the removal of 4 level fixup header. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix powerpc vmlinux.lds.SBenjamin Herrenschmidt2007-05-221-1/+0
| | | | | | | | | | | | | | | Sam's recent change in 7664709b44a13e2e0b545e2dd8e7b8797a1748dc broke things for us because we ended up with *(.text.*) before *(.text), whereas previously *(.text) was first. This was important because the start of the text section contains the kernel entry point. In fact, we don't need that *(.text.*) thing anymore and it incorrectly matched .text.init.refok, thus putting it before .text. .. ouch ! Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix typo: MMCR0_PMA0 != MMCR0_PMAOAnton Blanchard2007-05-221-3/+3
| | | | | | | | | | | | | | | | | pmc.c has: #ifndef MMCR0_PMA0 #define MMCR0_PMA0 0 This one took a while to find. Unfortunately its the wrong define (number 0 vs letter O). Its probably worth removing this override, since if our includes get screwed up we will have the same (hard to debug) failure. Fix it simply for now, so that we can backport to stable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-05 21:56:12 +0100