| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Keyboard has an LED that is ON/OFF when mic is muted/active
- LED is controlled by GPIO pin
- Patch enables led to appear in /sys/class/leds/ as hda::micmute
- Enables LED when mic is MUTED
- Disables LED when mic is active
[ fixed white spaces by tiwai ]
Signed-off-by: Ian Murphy <iano200@gmail.com>
Message-ID: <20240316094157.13890-1-iano200@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 1601cd53c7e3197181277326dbfc131d20a74e46.
This fix is applied globally to all devices, and it may change the
existing control names. When the devices are managed with the fixed
configuration like UCM, such control name mismatch may lead to
significant regressions.
For avoiding that kind of regression, we would need to apply such
changes conditionally, but it'd take time to settle down.
While the original fix is a good thing in general, in order to address
the regression, let's revert the change for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Message-ID: <20240316083744.28126-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a CPU enters into idle and deactivates itself from the timer
migration hierarchy without any global timer of its own to propagate,
the group event of that CPU is set to "ignore" and tmigr_update_events()
accordingly performs an early return without considering timers queued
by other CPUs.
If the hierarchy has a single level, and the CPU is the last one to
enter idle, it will ignore others' global timers, as in the following
layout:
[GRP0:0]
migrator = 0
active = 0
nextevt = T0i
/ \
0 1
active (T0i) idle (T1)
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
[GRP0:0]
migrator = NONE
active = NONE
nextevt = T0i
/ \
0 1
idle (T0i) idle (T1)
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". As a result
tmigr_update_events() ignores T1 and CPU 0 goes to idle with T1
unhandled.
This isn't proper to single level hierarchy though. A similar issue,
although slightly different, may arise on multi-level:
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0i, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = 0 migrator = NONE
active = 0 active = NONE
nextevt = T0i nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
active idle idle idle
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
CPU 2 also has a timer. The expiry order is T0 (ignored) < T1 < T2
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0i, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T0i nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
idle idle idle idle
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". As a result
tmigr_update_events() ignores T1. The change only propagated up to 1st
level so far.
[GRP1:0]
migrator = NONE
active = NONE
nextevt = T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T0i nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
idle idle idle idle
2) The change now propagates up to the top. tmigr_update_events() finds
that the child event is ignored and thus removes it. The top level next
event is now T2 which is returned to CPU 0 as its next effective expiry
to take account for as the global idle migrator. However T1 has been
ignored along the way, leaving it unhandled.
Fix those issues with removing the buggy related early return. Ignored
child events must not prevent from evaluating the other events within
the same group.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/ZfOhB9ZByTZcBy4u@lothringen
|
|
We've been seeing the following panic in production
BUG: kernel NULL pointer dereference, address: 0000000000000065
PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0
RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
Call Trace:
<TASK>
? __die+0x78/0xc0
? page_fault_oops+0x286/0x380
? __rpc_execute+0x2c3/0x470 [sunrpc]
? rpc_new_task+0x42/0x1c0 [sunrpc]
? exc_page_fault+0x5d/0x110
? asm_exc_page_fault+0x22/0x30
? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles]
pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4]
pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4]
? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles]
nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles]
ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles]
__nfs_pageio_add_request+0x154/0x6c0 [nfs]
nfs_pageio_add_request+0x26b/0x380 [nfs]
nfs_do_writepage+0x111/0x1e0 [nfs]
nfs_writepages_callback+0xf/0x30 [nfs]
write_cache_pages+0x17f/0x380
? nfs_pageio_init_write+0x50/0x50 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
nfs_writepages+0x125/0x210 [nfs]
do_writepages+0x67/0x220
? generic_perform_write+0x14b/0x210
filemap_fdatawrite_wbc+0x5b/0x80
file_write_and_wait_range+0x6d/0xc0
nfs_file_fsync+0x81/0x170 [nfs]
? nfs_file_mmap+0x60/0x60 [nfs]
__x64_sys_fsync+0x53/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Inspecting the core with drgn I was able to pull this
>>> prog.crashed_thread().stack_trace()[0]
#0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27
>>> prog.crashed_thread().stack_trace()[0]['idx']
(u32)1
>>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds
(struct nfs4_ff_layout_ds *)0xffffffffffffffed
This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds()
which could error out initializing the mirror_ds, and then we go to
clean it all up and our check is only for if (!mirror->mirror_ds). This
is inconsistent with the rest of the users of mirror_ds, which have
if (IS_ERR_OR_NULL(mirror_ds))
to keep from tripping over this exact scenario. Fix this up in
ff_layout_cancel_io() to make sure we don't panic when we get an error.
I also spot checked all the other instances of checking mirror_ds and we
appear to be doing the correct checks everywhere, only unconditionally
dereferencing mirror_ds when we know it would be valid.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Fixes: b739a5bd9d9f ("NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Update them to the correct revision numbers.
Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
checking"
This reverts commits 99101dda29e3186b1356b0dc4dbb835c02c71ac9 and
b80b701d5a67d07f4df4a21e09cb31f6bc1feeca.
Linus reports that the sysreg reserved bit checks in KVM have led to
build failures, arising from commit fdd867fe9b32 ("arm64/sysreg: Add
register fields for ID_AA64DFR1_EL1") giving meaning to fields that were
previously RES0.
Of course, this is a genuine issue, since KVM's sysreg emulation depends
heavily on the definition of reserved fields. But at this point the
build breakage is far more offensive, and the right course of action is
to revert and retry later.
All of these build-time assertions were on by default before
commit 99101dda29e3 ("KVM: arm64: Make build-time check of RES0/RES1
bits optional"), so deliberately revert it all atomically to avoid
introducing further breakage of bisection.
Link: https://lore.kernel.org/all/CAHk-=whCvkhc8BbFOUf1ddOsgSGgEjwoKv77=HEY1UiVCydGqw@mail.gmail.com/
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add Snakebyte GAMEPAD BASE X and Snakebyte GAMEPAD RGB X to the list
of supported devices.
Signed-off-by: Matt Scialabba <matt.git@fastmail.fm>
Link: https://lore.kernel.org/r/efbfb428-06b0-48f9-8701-db291c2a9d65@app.fastmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Convert Samsung SoC Keypad bindings to DT schema with changes:
1. Rename "linux,keypad-no-autorepeat" property to
"linux,input-no-autorepeat", because the latter was implemented in
the Linux driver.
2. Add clocks and clock-names, already used by DTS and the Linux driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240312183001.714626-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The EFI stub on x86 no longer invokes the decompressor as a subsequent
boot stage, but calls into the decompression code directly while running
in the context of the EFI boot services.
This means that when using the native EFI entrypoint (as opposed to the
EFI handover protocol, which clears BSS explicitly), the firmware PE
image loader is being relied upon to ensure that BSS is zeroed before
the EFI stub is entered from the firmware.
As Radek's report proves, this is a bad idea. Not all loaders do this
correctly, which means some global variables that should be statically
initialized to 0x0 may have junk in them.
So clear BSS explicitly when entering via efi_pe_entry(). Note that
zeroing BSS from C code is not generally safe, but in this case, the
following assignment and dereference of a global pointer variable
ensures that the memset() cannot be deferred or reordered.
Cc: <stable@kernel.org> # v6.1+
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
imx6q has additional regulators compared to imx6ul. Add them to the list
of allowed patterns.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314145953.2957313-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
riscv_intc_custom_base is initialized to BITS_PER_LONG, so the second
check passes even though AIA provides 64 interrupts. Adjust the condition to
only check the custom range for interrupts outside the standard range, and
adjust the standard range when AIA is available.
Fixes: 3c46fc5b5507 ("irqchip/riscv-intc: Add support for RISC-V AIA")
Fixes: 678c607ecf8a ("irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240312212813.2323841-1-samuel.holland@sifive.com
|
|
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is sufficient and does not need any
variable assignment in front of it.
Commit c2bd08ba20a5 ("treewide: remove meaningless assignments in
Makefiles", 2024-02-23) did this to all of tools/ but ignored in-flight
changes to tools/testing/selftests/kvm/Makefile, so reapply the change.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The conversion to guard macro dropped the irq-disablement at closing
mistakenly, which may lead to a race. Fix it.
Fixes: beb45974dd49 ("ALSA: timer: Use guard() for locking")
Reported-by: syzbot+28c1a5a5b041a754b947@syzkaller.appspotmail.com
Closes: http://lore.kernel.org/r/0000000000000b9a510613b0145f@google.com
Message-ID: <20240315101447.18395-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations
such as the 14IAP7, and the bass speakers can be fixed using similar methods
with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated
separately.
Signed-off-by: Jichi Zhang <i@jichi.ca>
Message-ID: <20240315081954.45470-3-i@jichi.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Stephen reported that an htmldocs build hit:
Documentation/ABI/testing/debugfs-cxl:38: ERROR: Unexpected indentation.
It turns out that line was fine but the tool was unhappy about some line
breaks in the table of values to error types.
It turns out that:
make V=1 SPHINXDIRS="admin-guide" htmldocs
...can not be used to get more info about what is behind a documentation
build error. It was only pure luck that reflowing the text resulted in
an error message that seemed a imply a problem later on with line breaks
around the table.
Fixes: 8039804cfa73 ("cxl/core: Add CXL EINJ debugfs files")
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: http://lore.kernel.org/r/20240314141313.7ba04aff@canb.auug.org.au
Cc: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The cont_read.ongoing flag should only be enabled at the beginning of a
read operation, and also disabled at its end, so we never end up
triggering nasty side effects outside of this scope. The mtd core being
highly serialized, we should not be bothered by parallel accesses
anyway.
In case we reach the end of a read operation and the boolean was not
properly disabled, it's a bug, but it's totally manageable. So warn, and
then fix the boolean state.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240307115315.1942678-2-miquel.raynal@bootlin.com
|
|
As a matter of fact, continuous reads require additional handling at the
operation level in order for them to work properly. The core helpers do
have this additional logic now, but any time a controller implements its
own page helper, this extra logic is "lost". This means we need another
level of per-controller driver checks to ensure they can leverage
continuous reads. This is for now unsupported, so in order to ensure
continuous reads are enabled only when fully using the core page
helpers, we need to add more initial checks.
Also, as performance is not relevant during raw accesses, we also
prevent these from enabling the feature.
This should solve the issue seen with controllers such as the STM32 FMC2
when in sequencer mode. In this case, the continuous read feature would
be enabled but not leveraged, and most importantly not disabled, leading
to further operations to fail.
Reported-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/linux-mtd/20240307115315.1942678-1-miquel.raynal@bootlin.com
|
|
BCMBCA broadband SoC based board design does not specify ecc setting in
dts but rather use the SoC NAND strap info to obtain the ecc strength
and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
this purpose and update driver to support this option. However these two
options can not be used at the same time.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com
|
|
Fix the following sparse warnings:
sparse warnings: (new ones prefixed by >>)
>> drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:79:41: sparse: sparse:
cast removes address space '__iomem' of expression
drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse:
cast removes address space '__iomem' of expression
drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse:
cast removes address space '__iomem' of expression
drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse:
cast removes address space '__iomem' of expression
Fixes: c52c16d1bee5 ("mtd: rawnand: brcmnand: Add BCMBCA read data bus interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402270940.gmVLVRg0-lkp@intel.com/
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240227190258.200929-1-william.zhang@broadcom.com
|
|
Looks like a copy'n'paste mistake introduced when initially adding the
dynamic timings feature with commit f9ce2eddf176 ("mtd: nand: atmel: Add
->setup_data_interface() hooks"). The context around this and
especially the code itself suggests 'read' is meant instead of write.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240226122537.75097-1-ada@thorsis.com
|
|
While crossing a LUN boundary, it is probably safer (and clearer) to
keep all members of the continuous read structure aligned, including the
pause page (which is the last page of the lun or the last page of the
continuous read). Once these members properly in sync, we can use the
rawnand_cap_cont_reads() helper everywhere to "prepare" the next
continuous read if there is one.
Fixes: bbcd80f53a5e ("mtd: rawnand: Prevent crossing LUN boundaries during sequential reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-4-miquel.raynal@bootlin.com
|
|
For LUN crossing boundaries, it is handy to know what is the index of
the last page in a LUN. This helper will soon be reused. At the same
time I rename page_per_lun to ppl in the calling function to clarify the
lines.
Cc: stable@vger.kernel.org # v6.7
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-3-miquel.raynal@bootlin.com
|
|
We need to avoid the first page if we don't read it entirely.
We need to avoid the last page if we don't read it entirely.
While rather simple, this logic has been failed in the previous
fix. This time I wrote about 30 unit tests locally to check each
possible condition, hopefully I covered them all.
Reported-by: Christophe Kerello <christophe.kerello@foss.st.com>
Closes: https://lore.kernel.org/linux-mtd/20240221175327.42f7076d@xps-13/T/#m399bacb10db8f58f6b1f0149a1df867ec086bb0a
Suggested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 828f6df1bcba ("mtd: rawnand: Clarify conditions to enable continuous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-2-miquel.raynal@bootlin.com
|
|
Remove the extraneous kernel-doc description for @nand_technology to
eliminate a kernel-doc warning:
nand_hynix.c:39: warning: Excess struct member 'nand_technology' description in 'hynix_nand'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240224014639.16145-1-rdunlap@infradead.org
|
|
Add microchip,sam9x7-pmecc to DT bindings documentation.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223172520.671940-1-varshini.rajendran@microchip.com
|
|
The write protection feature is controlled by the module parameter wp_on
with default set to enabled. But not all the board use this feature
especially in BCMBCA broadband board. And module parameter is not
sufficient as different board can have different option. Add a device
tree property and allow this feature to be configured through the board
dts on per board basis.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com
|
|
The BCMBCA broadband SoC integrates the NAND controller differently than
STB, iProc and other SoCs. It has different endianness for NAND cache
data.
Add a SoC read data bus shim for BCMBCA to meet the specific SoC need
and performance improvement using the optimized memcpy function on NAND
cache memory.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-12-william.zhang@broadcom.com
|
|
In preparing to support multiple BCMBCA SoCs, rename bcm63138 to bcmbca
in the driver code and driver file name.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-11-william.zhang@broadcom.com
|
|
Enable the nand controller and add WP pin connection property in actual
board dts as they are board level properties now that they are disabled
and moved out from SoC dtsi.
Also remove the unnecessary brcm,nand-has-wp property from AC5300 board.
This property is only needed for some old controller that this board
does not apply.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-10-william.zhang@broadcom.com
|
|
Add support for Broadcom STB NAND controller in BCMBCA ARMv8 chip dts
files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-9-william.zhang@broadcom.com
|
|
Add support for Broadcom STB NAND controller in BCMBCA ARMv7 chip dts
files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-8-william.zhang@broadcom.com
|
|
Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently. If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.
This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail.
Link: https://lkml.kernel.org/r/20240313105827.5296-3-konishi.ryusuke@gmail.com
Fixes: 1f5abe7e7dbc ("nilfs2: replace BUG_ON and BUG calls triggerable from ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nilfs2: fix kernel bug at submit_bh_wbc()".
This resolves a kernel BUG reported by syzbot. Since there are two
flaws involved, I've made each one a separate patch.
The first patch alone resolves the syzbot-reported bug, but I think
both fixes should be sent to stable, so I've tagged them as such.
This patch (of 2):
Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data
to a nilfs2 file system whose metadata is corrupted.
There are two flaws involved in this issue.
The first flaw is that when nilfs_get_block() locates a data block using
btree or direct mapping, if the disk address translation routine
nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata
corruption, it can be passed back to nilfs_get_block(). This causes
nilfs_get_block() to misidentify an existing block as non-existent,
causing both data block lookup and insertion to fail inconsistently.
The second flaw is that nilfs_get_block() returns a successful status in
this inconsistent state. This causes the caller __block_write_begin_int()
or others to request a read even though the buffer is not mapped,
resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc()
failing.
This fixes the first issue by changing the return value to code -EINVAL
when a conversion using DAT fails with code -ENOENT, avoiding the
conflicting condition that leads to the kernel bug described above. Here,
code -EINVAL indicates that metadata corruption was detected during the
block lookup, which will be properly handled as a file system error and
converted to -EIO when passing through the nilfs2 bmap layer.
Link: https://lkml.kernel.org/r/20240313105827.5296-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240313105827.5296-2-konishi.ryusuke@gmail.com
Fixes: c3a7abf06ce7 ("nilfs2: support contiguous lookup of blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+cfed5b56649bddf80d6e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cfed5b56649bddf80d6e
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For special files in S_IFBLK/S_IFCHR/S_IFIFO type, we already have
ocfs2_setattr and ocfs2_getattr enabled. It's confusing for user space if
it can use setattr/getattr to control one attribute appointed but can not
list attributes using listxattr for above type files:
$ mknod /mnt/b b 0 0
$ setfattr -h -n trusted.name -v 0xbabe /mnt/b
$ getfattr -n trusted.name /mnt/b
getfattr: Removing leading '/' from absolute path names
trusted.name=0sur4=
$ getfattr -m trusted /mnt/b
$
Fix it by enabling ocfs2_listxattr for ocfs2_special_file_iops. After the
commit, fstests/generic/062 will pass.
Link: https://lkml.kernel.org/r/20240312042908.8889-1-l@damenly.org
Signed-off-by: Su Yue <glass.su@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.
Link: https://lkml.kernel.org/r/20240224135008.829878-1-chengming.zhou@linux.dev
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No functional modification involved.
block/blk-settings.c:281: warning: expecting prototype for queue_limits_commit_set(). Prototype was for queue_limits_set() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8539
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240314025615.71269-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Passing a NULL buffer into the lsm_get_self_attr() syscall is a valid
way to quickly determine the minimum size of the buffer needed to for
the syscall to return all of the LSM attributes to the caller.
Unfortunately we/I broke that behavior in commit d7cf3412a9f6
("lsm: consolidate buffer size handling into lsm_fill_user_ctx()")
such that it returned an error to the caller; this patch restores the
original desired behavior of using the NULL buffer as a quick way to
correctly size the attribute buffer.
Cc: stable@vger.kernel.org
Fixes: d7cf3412a9f6 ("lsm: consolidate buffer size handling into lsm_fill_user_ctx()")
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change the size parameters in lsm_list_modules(), lsm_set_self_attr()
and lsm_get_self_attr() from size_t to u32. This avoids the need to
have different interfaces for 32 and 64 bit systems.
Cc: stable@vger.kernel.org
Fixes: a04a1198088a ("LSM: syscalls for current process attributes")
Fixes: ad4aff9ec25f ("LSM: Create lsm_list_modules system call")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-and-reviewed-by: Dmitry V. Levin <ldv@strace.io>
[PM: subject and metadata tweaks, syscall.h fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This reverts commit 8a08c5fd89b447a7de7eb293a7a274c46b932ba2.
It turns out while this is a perfectly valid and long overdue thing to do
for user initiated discards / zeroing from the ioctl handler, it actually
breaks file system use of the discard helper by interrupting in places
the file system doesn't expect, and by leaving the bio chain in a state
that the file system callers of (at least) __blkdev_issue_discard do
not expect.
Revert the change for now, we'll redo it for the next merge window
after refactoring the code to better split the file system vs ioctl
callers and cleaning up a few other loose ends.
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240314021623.1908895-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Shrink this percpu object by one array element so that the object size
becomes exactly 512 bytes. This will lead to more efficient memory use,
hopefully.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Currently, struct time_stats has the optional ability to quantize the
information that it collects. This is /probably/ useful for callers who
want to see quantized information, but it more than doubles the size of
the structure from 224 bytes to 464. For users who don't care about
that (e.g. upcoming xfs patches) and want to avoid wasting 240 bytes per
counter, split the two into separate pieces.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The only caller of this code (time_stats) always knows the weights and
whether or not any information has been collected. Pass this
information into the mean and variance code so that it doesn't have to
store that information. This reduces the structure size from 24 to 16
bytes, which shrinks each time_stats counter to 192 bytes from 208.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Filesystems can stay mounted for a very long time, so add some larger
units.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
prep work for lifting out of fs/bcachefs/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that we've got the errors_silent mechanism, we don't have to check
if the reconstruct_alloc option is set all over the place.
Also - users no longer have to explicitly select fsck and fix_errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
gc_stripes_done() and gc_reflink_done() may do alloc btree updates (i.e.
when deleting an indirect extent) - we need bucket gens to be fixed by
then.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we need to run the normal extent update path on deletion -
bch2_bkey_make_mut() is incorrect when key type is changing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
