summaryrefslogtreecommitdiffstats
path: root/arch (unfollow)
Commit message (Collapse)AuthorFilesLines
2020-09-29s390: remove unused _swsusp_reset_dmaVasily Gorbik4-21/+0
Since commit 394216275c7d ("s390: remove broken hibernate / power management support") _swsusp_reset_dma is unused and could be safely removed. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-29s390/kaslr: correct and explain randomization base generationVasily Gorbik1-38/+92
Currently there are several minor problems with randomization base generation code: 1. It might misbehave in low memory conditions. In particular there might be enough space for the kernel on [0, block_sum] but after if (base < safe_addr) base = safe_addr; it might not be enough anymore. 2. It does not correctly handle minimal address constraint. In condition if (base < safe_addr) base = safe_addr; a synthetic value is compared with an address. If we have a memory setup with memory holes due to offline memory regions, and safe_addr is close to the end of the first online memory block - we might position the kernel in invalid memory. 3. block_sum calculation logic contains off-by-one error. Let's say we have a memory block in which the kernel fits perfectly (end - start == kernel_size). In this case: if (end - start < kernel_size) continue; block_sum += end - start - kernel_size; block_sum is not increased, while it is a valid kernel position. So, address problems listed and explain algorithm used. Besides that restructuring the code makes it possible to extend kernel positioning algorithm further. Currently we pick position in between single [min, max] range (min = safe_addr, max = memory_limit). In future we can do that for multiple ranges as well (by calling count_valid_kernel_positions for each range). Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-29s390/kaslr: avoid mixing valid random value and an error codeVasily Gorbik1-5/+5
0 is a valid random value. To avoid mixing it with error code 0 as an return code make get_random() take extra argument to output random value and return an error code. Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-29s390/3215: simplify the return expression of tty3215_open()Qinglang Miao1-6/+1
Simplify the return expression. Link: https://lkml.kernel.org/r/20200921131101.93037-1-miaoqinglang@huawei.com Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: unify stp_work_mutex and clock_sync_mutexSven Schnelle1-27/+26
No need to have two mutexes, and while at it rename it to stp_mutex. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: add sysfs file to show scheduled leap secondsSven Schnelle1-0/+29
This patch introduces /sys/devices/system/stp/scheduled_leap_seconds, which will contain either 0,0 if no leap second is scheduled, or the UTC timestamp + leap second offset. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: add support for leap secondsSven Schnelle4-10/+152
In the current implementation, leap seconds are only synchronized during the bootup process when the STP clock is synced. If the Leap second offset (LSO) changes the machine must be rebooted, which is not desired. This patch adds the required code to handle Leap second changes during runtime. If the Leap second changes, a Configuration change machine check is triggered. The STP code than schedules a Leap second insertion/deletion with do_adjtimex(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: use u32 instead of unsigned intSven Schnelle1-25/+25
In hardware-dependent headers using u32 is easier to read and less error-prone. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: use __packedSven Schnelle1-2/+4
Use __packed instead of __attribute__((packed)) Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: add locking to sysfs functionsSven Schnelle1-33/+85
The sysfs function might race with stp_work_fn. To prevent that, add the required locking. Another issue is that the sysfs functions are checking the stp_online flag, but this flag just holds the user setting whether STP is enabled. Add a flag to clock_sync_flag whether stp_info holds valid data and use that instead. Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-24s390/pkey: support CCA and EP11 secure ECC private keysHarald Freudenberger6-95/+818
This patch extends the pkey kernel module to support CCA and EP11 secure ECC (private) keys as source for deriving ECC protected (private) keys. There is yet another new ioctl to support this: PKEY_KBLOB2PROTK3 can handle all the old keys plus CCA and EP11 secure ECC keys. For details see ioctl description in pkey.h. The CPACF unit currently only supports a subset of 5 different ECC curves (P-256, P-384, P-521, ED25519, ED448) and so only keys of this curve type can be transformed into protected keys. However, the pkey and the cca/ep11 low level functions do not check this but simple pass-through the key blob to the firmware onto the crypto cards. So most likely the failure will be a response carrying an error code resulting in user space errno value EIO instead of EINVAL. Deriving a protected key from an EP11 ECC secure key requires a CEX7 in EP11 mode. Deriving a protected key from an CCA ECC secure key requires a CEX7 in CCA mode. Together with this new ioctl the ioctls for querying lists of apqns (PKEY_APQNS4K and PKEY_APQNS4KT) have been extended to support EP11 and CCA ECC secure key type and key blobs. Together with this ioctl there comes a new struct ep11kblob_header which is to be prepended onto the EP11 key blob. See details in pkey.h for the fields in there. The older EP11 AES key blob with some info stored in the (unused) session field is also supported with this new ioctl. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-24s390/zcrypt: Support for CCA APKA master keysHarald Freudenberger5-57/+154
Support for CCA APKA (used for CCA ECC keys) master keys. The existing mkvps sysfs attribute for each queue for cards in CCA mode is extended to show the APKA master key register states and verification pattern: Improve the mkvps sysfs attribute to display the APKA master key verification patterns for old, current and new master key registers. The APKA master key is used to encrypt CCA ECC secure keys. The syntax is analog to the existing AES mk verification patterns: APKA NEW: <new_apka_mk_state> <new_apka_mk_mkvp> APKA CUR: <cur_apka_mk_state> <cur_apka_mk_mkvp> APKA OLD: <old_apka_mk_state> <old_apka_mk_mkvp> with <new_apka_mk_state>: 'empty' or 'partial' or 'full' <cur_apka_mk_state>: 'valid' or 'invalid' <old_apka_mk_state>: 'valid' or 'invalid' <new_apka_mk_mkvp>, <cur_apka_mk_mkvp>, <old_apka_mk_mkvp> 8 byte hex string with leading 0x MKVP means Master Key Verification Pattern and is a folded hash over the key value. Only the states 'full' and 'valid' result in displaying a useful mkvp, otherwise a mkvp of all bytes zero is shown. If for any reason the FQ fails and the (cached) information is not available, the state '-' will be shown with the mkvp value also '-'. The values shown here are the very same as the cca panel tools displays. The internal function cca_findcard2() also supports to match against the APKA master key verification patterns and the pkey kernel module which uses this function needed compatible rewrite of these invocations. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-21s390/sclp: remove unused sclp_early_printk_forcedVasily Gorbik3-11/+5
This reverts commit 55a5542a5462 ("s390/hibernate: fix error handling when suspend cpu != resume cpu"). It added sclp_early_printk_force() which is no longer used since commit 394216275c7d ("s390: remove broken hibernate / power management support"). No hibernate - no problem. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-21s390/sclp: clean up unneeded .data section usageVasily Gorbik1-2/+2
Since commit 980d5f9ab36b ("s390/boot: enable .bss section for compressed kernel") .bss section usage is no longer restricted. .bss section is a part of the decompressor's image and is zeroed by the linker. For that reason clean up now unneeded .data section usage. Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-21s390/boot: avoid unnecessary zeroing of .bss sectionVasily Gorbik1-6/+0
.bss section is a part of the decompressor's image now, linker fills it with zeros already. No need do it with memset additionally. Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-17s390/ap: remove unnecessary spin_lock_init()Qinglang Miao1-1/+0
The spinlock ap_poll_timer_lock is initialized statically. It is unnecessary to initialize by spin_lock_init(). Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-17s390/diag: convert to use DEFINE_SEQ_ATTRIBUTE macroLiu Shixin1-12/+1
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-17s390/uaccess: add HAVE_GET_KERNEL_NOFAULT supportHeiko Carstens1-0/+111
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-17s390/dis: get rid of set_fs() usageHeiko Carstens1-8/+14
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-17s390/zcrypt: remove set_fs() invocation in zcrypt device driverHarald Freudenberger6-106/+92
This patch reworks the zcrypt device driver so that the set_fs() invocation is not needed any more. Instead there is a new flag bool userspace passed through all the functions which tells if the pointer arguments are userspace or kernelspace. Together with the two new inline functions z_copy_from_user() and z_copy_to_user() which either invoke copy_from_user (userspace is true) or memcpy (userspace is false) the zcrypt dd and the AP bus now has no requirement for the set_fs() functionality any more. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/kasan: support protvirt with 4-level pagingVasily Gorbik4-20/+43
Currently the kernel crashes in Kasan instrumentation code if CONFIG_KASAN_S390_4_LEVEL_PAGING is used on protected virtualization capable machine where the ultravisor imposes addressing limitations on the host and those limitations are lower then KASAN_SHADOW_OFFSET. The problem is that Kasan has to know in advance where vmalloc/modules areas would be. With protected virtualization enabled vmalloc/modules areas are moved down to the ultravisor secure storage limit while kasan still expects them at the very end of 4-level paging address space. To fix that make Kasan recognize when protected virtualization is enabled and predefine vmalloc/modules areas position which are compliant with ultravisor secure storage limit. Kasan shadow itself stays in place and might reside above that ultravisor secure storage limit. One slight difference compaired to a kernel without Kasan enabled is that vmalloc/modules areas position is not reverted to default if ultravisor initialization fails. It would still be below the ultravisor secure storage limit. Kernel layout with kasan, 4-level paging and protected virtualization enabled (ultravisor secure storage limit is at 0x0000800000000000): ---[ vmemmap Area Start ]--- 0x0000400000000000-0x0000400080000000 ---[ vmemmap Area End ]--- ---[ vmalloc Area Start ]--- 0x00007fe000000000-0x00007fff80000000 ---[ vmalloc Area End ]--- ---[ Modules Area Start ]--- 0x00007fff80000000-0x0000800000000000 ---[ Modules Area End ]--- ---[ Kasan Shadow Start ]--- 0x0018000000000000-0x001c000000000000 ---[ Kasan Shadow End ]--- 0x001c000000000000-0x0020000000000000 1P PGD I Kernel layout with kasan, 4-level paging and protected virtualization disabled/unsupported: ---[ vmemmap Area Start ]--- 0x0000400000000000-0x0000400060000000 ---[ vmemmap Area End ]--- ---[ Kasan Shadow Start ]--- 0x0018000000000000-0x001c000000000000 ---[ Kasan Shadow End ]--- ---[ vmalloc Area Start ]--- 0x001fffe000000000-0x001fffff80000000 ---[ vmalloc Area End ]--- ---[ Modules Area Start ]--- 0x001fffff80000000-0x0020000000000000 ---[ Modules Area End ]--- Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/protvirt: support ultravisor without secure storage limitVasily Gorbik1-1/+2
Avoid potential crash due to lack of secure storage limit. Check that max_sec_stor_addr is not 0 before adjusting vmalloc position. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/protvirt: parse prot_virt option in the decompressorVasily Gorbik4-26/+28
To make early kernel address space layout definition possible parse prot_virt option in the decompressor and pass it to the uncompressed kernel. This enables kasan to take ultravisor secure storage limit into consideration and pre-define vmalloc position correctly. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/kasan: avoid unnecessary moving of vmemmapVasily Gorbik1-2/+6
Currently vmemmap area is unconditionally moved beyond Kasan shadow memory. When Kasan is not enabled vmemmap area position is calculated in setup_memory_end() and depends on limiting factors like ultravisor secure storage limit. Try to follow the same logic with Kasan enabled as well and avoid unnecessary vmemmap area position changes unless it really intersects with Kasan shadow. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/mm,ptdump: sort markersVasily Gorbik1-0/+19
Kasan configuration options and size of physical memory present could affect kernel memory layout. In particular vmemmap, vmalloc and modules might come before kasan shadow or after it. To make ptdump correctly output markers in the right order markers have to be sorted. To preserve the original order of markers with the same start address avoid using sort() from lib/sort.c (which is not stable sorting algorithm) and sort markers in place. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/pci: add missing pci_iov.h includeNiklas Schnelle1-0/+2
this fixes a missing prototype compiler warning spotted by the kernel test robot. Fixes: abb95b7550f8 ("s390/pci: consolidate SR-IOV specific code") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/mm,ptdump: add proper ifdefsHeiko Carstens1-2/+3
Use ifdefs instead of IS_ENABLED() to avoid compile error for !PTDUMP_DEBUGFS: arch/s390/mm/dump_pagetables.c: In function ‘pt_dump_init’: arch/s390/mm/dump_pagetables.c:248:64: error: ‘ptdump_fops’ undeclared (first use in this function); did you mean ‘pidfd_fops’? debugfs_create_file("kernel_page_tables", 0400, NULL, NULL, &ptdump_fops); Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Fixes: 08c8e685c7c9 ("s390: add ARCH_HAS_DEBUG_WX support") Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-16s390/boot: enable .bss section for compressed kernelAlexander Egorenkov9-41/+25
- Support static uninitialized variables in compressed kernel. - Remove chkbss script - Get rid of workarounds for not having .bss section Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/uv: add destroy page callJanosch Frank3-1/+28
We don't need to export pages if we destroy the VM configuration afterwards anyway. Instead we can destroy the page which will zero it and then make it accessible to the host. Destroying is about twice as fast as the export. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/kvm/20200907124700.10374-2-frankja@linux.ibm.com/ Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/mm,ptdump: add couple of additional markersVasily Gorbik3-5/+24
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> [hca@linux.ibm.com: add more markers, rename some markers] Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/kasan: make shadow memory noexecVasily Gorbik1-2/+6
ARCH_HAS_DEBUG_WX feature support brought attention to the fact that currently initial kasan shadow memory mapped without noexec flag. So fix that. Temporary initial identity mapping is still created without noexec, but it is replaced by properly set up paging later. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390: add ARCH_HAS_DEBUG_WX supportHeiko Carstens7-2/+83
Checks the whole kernel address space for W+X mappings. Note that currently the first lowcore page unfortunately has to be mapped W+X. Therefore this not reported as an insecure mapping. For the very same reason the wording is also different to other architectures if the test passes: On s390 it is "no unexpected W+X pages found" instead of "no W+X pages found". Tested-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/mm,ptdump: make page table dumping seq_file optionalHeiko Carstens1-10/+26
s390 version of ae5d1cf358a5 ("arm64: dump: Make the page table dumping seq_file optional"). Tested-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/kprobes: make insn pages read-onlyHeiko Carstens1-18/+39
Make sure that kprobe insn pages are not writable anymore. Tested-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/pci: remove clp_rescan_pci_devices_simple()Niklas Schnelle2-24/+21
clp_rescan_pci_devices_simple() is neither simpler than clp_scan_pci_devices() nor does it really scan PCI devices, in particular it will neither add newly discovered devices nor remove those which disappeared. Instead it only refreshes PCI function handles and also has just a single callsite in the same translation unit left which in fact only refreshes one specific function handle identified by a FID. Clarify this by renaming the function and its helper to clp_refresh_fh() respectvely __clp_refresh_fh() and make it take a fid directly which saves us dealing with the NULL case which updated all function handles but is not used anymore. Furthermore since the only callsite is in the same translation unit make it static. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/pci: remove clp_rescan_pci_devices()Niklas Schnelle3-19/+2
there is only one call site of clp_rescan_pci_devices() and all the function does is call zpci_remove_reserved_devices() followed by a duplicating clp_scan_pci_devices(). So inline the single call as a call to zpci_remove_reserved_devices() and clp_scan_pci_devices() and remove the function. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/pci: remove unused function zpci_rescan()Niklas Schnelle2-8/+0
the only caller of this was removed as part of the suspend/resume removal so no need to keep this function around. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/pci: consolidate SR-IOV specific codeNiklas Schnelle6-96/+133
currently we have multiple #ifdef CONFIG_PCI_IOV blocks spread over different compliation units and headers, all dealing with SR-IOV specific behavior. This violates the style guide which discourages conditionally compiled code blocks and hinders maintainability by speading SR-IOV functionality over many files. Let's move all of this into a conditionally compiled pci_iov.c file and local header and prefix SR-IOV specific functions with zpci_iov_*. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/mm,ptdump: hold cpa mutex while walking for kernel page table dumpHeiko Carstens3-1/+8
This is currently only preventing that outdated information is provided to user space. A concurrent split of huge/large pages does modify the kernel page tables, however either the huge/large mapping is reported or the split area is being walked. This "fixes" also only a potential future bug, since split pages could also be merged again if page permissions are the same for larger memory areas. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/mm,ptdump: hold memory hotplug lock while walking for kernel page table ↵Heiko Carstens1-0/+2
dump This is the s390 variant of commit bf2b59f60ee1 ("arm64/mm: Hold memory hotplug lock while walking for kernel page table dump"). Right now this doesn't fix any real bug, however as soon as kvm patches get merged which make use of memory remove we might end up dereferencing/accessing freed page tables. Therefore fix this potential bug already now. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/mm,ptdump: convert to generic page table dumperHeiko Carstens6-201/+51
Make use of generic ptdump infrastructure. Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/zcrypt: simplify cca_findcard2 loop codeHarald Freudenberger1-63/+58
Instead of two times go through the list of available AP devices (which may be up to 256 * 256 entries) this patch reworks the code do only run through once. The price is instead of reporting all possible devices to the caller only the first 256 devices are collected. However, having to choose from 256 AP devices is plenty of resources and should fulfill the caller's requirements. On the other side the loop code is much simplier and more easy to maintain. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/qdio: always use dev_name() for device name in QIBJulian Wiedmann4-6/+4
Passing a custom name from the device driver is nice - but in practice it's only zfcp who has been using this. So we might as well hard-code a naming scheme in the qdio layer, so that qeth also benefits from it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/pci: Implement ioremap_wc/prot() with MIONiklas Schnelle11-5/+132
With our current support for the new MIO PCI instructions, write combining/write back MMIO memory can be obtained via the pci_iomap_wc() and pci_iomap_wc_range() functions. This is achieved by using the write back address for a specific bar as provided in clp_store_query_pci_fn() These functions are however not widely used and instead drivers often rely on ioremap_wc() and ioremap_prot(), which on other platforms enable write combining using a PTE flag set through the pgrprot value. While we do not have a write combining flag in the low order flag bits of the PTE like x86_64 does, with MIO support, there is a write back bit in the physical address (bit 1 on z15) and thus also the PTE. Which bit is used to toggle write back and whether it is available at all, is however not fixed in the architecture. Instead we get this information from the CLP Store Logical Processor Characteristics for PCI command. When the write back bit is not provided we fall back to the existing behavior. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/qdio: clean up QDR setupJulian Wiedmann2-24/+17
__qdio_allocate_fill_qdr() is meant to set up one specific queue descriptor in the QDR. But for this simple task, it gets passed a bunch of global structs and offsets - and then navigates through the structs to find its actual operands. Clean up all the complicated pointer chasing & index calculation, and just pass a descriptor and its associated queue struct. While at it also add some virt_to_phys() translations, to clarify that addresses in the QDR are meant to be absolute. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/qdio: make qdio_handle_aobs() more robustJulian Wiedmann1-22/+20
When processing a PENDING buffer with no attached aob, the current code would get stuck on this buffer (as the 'continue' causes us to not advance the buffer index) and process it repeatedly until the loop terminates eventually. Luckily this should never happen - the HW must not use the PENDING state when no aob was provided. But we can still make this code path less fragile and protect against buggy devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390: disable branch profiling for vdsoSven Schnelle1-1/+1
When branch profiling is enabled, if () gets annotated with code to instrument the hit/miss ratio. This doesn't work for VDSO as we can't access kernel code. Add -DDISABLE_BRANCH_PROFILING to fix this. Reported-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26s390: convert to GENERIC_VDSOSven Schnelle20-420/+221
Convert s390 to generic vDSO. There are a few special things on s390: - vDSO can be called without a stack frame - glibc did this in the past. So we need to allocate a stackframe on our own. - The former assembly code used stcke to get the TOD clock and applied time steering to it. We need to do the same in the new code. This is done in the architecture specific __arch_get_hw_counter function. The steering information is stored in an architecure specific area in the vDSO data. - CPUCLOCK_VIRT is now handled with a syscall fallback, which might be slower/less accurate than the old implementation. The getcpu() function stays as an assembly function because there is no generic implementation and the code is just a few lines. Performance number from my system do 100 mio gettimeofday() calls: Plain syscall: 8.6s Generic VDSO: 1.3s old ASM VDSO: 1s So it's a bit slower but still much faster than syscalls. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26s390/checksum: coding style changesHeiko Carstens1-28/+22
Add some coding style changes which hopefully make the code look a bit less odd. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26s390/checksum: have consistent calculationsHeiko Carstens1-1/+1
Use "|" instead of "+" within csum_fold() for consistency reasons, like in the rest of the file. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 11:31:43 +0100