summaryrefslogtreecommitdiffstats
path: root/arch (follow)
Commit message (Collapse)AuthorAgeFilesLines
* s390/bpf: recache skb->data/hlen for skb_vlan_push/popMichael Holzheu2015-07-292-23/+37
| | | | | | | | | | | | | | Allow eBPF programs attached to TC qdiscs call skb_vlan_push/pop via helper functions. These functions may change skb->data/hlen. This data is cached by s390 JIT to improve performance of ld_abs/ld_ind instructions. Therefore after a change we have to reload the data. In case of usage of skb_vlan_push/pop, in the prologue we store the SKB pointer on the stack and restore it after BPF_JMP_CALL to skb_vlan_push/pop. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/bpf: Only clear A and X for converted BPF programsMichael Holzheu2015-07-291-9/+11
| | | | | | | | | | | | Only classic BPF programs that have been converted to eBPF need to clear the A and X registers. We can check for converted programs with: bpf_prog->type == BPF_PROG_TYPE_UNSPEC So add the check and skip initialization for real eBPF programs. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/bpf: increase BPF_SIZE_MAXMichael Holzheu2015-07-291-12/+3
| | | | | | | | | | | | | | Currently we have the restriction that jitted BPF programs can have a maximum size of one page. The reason is that we use short displacements for the literal pool. The 20 bit displacements are available since z990 and BPF requires z196 as minimum. Therefore we can remove this restriction and use everywhere 20 bit signed long displacements. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/bpf: Fix multiple macro expansionsMichael Holzheu2015-07-291-2/+3
| | | | | | | | | | | | | | | | | | | | The EMIT6_DISP_LH macro passes the "disp" parameter to the _EMIT6_DISP_LH macro. The _EMIT6_DISP_LH macro uses the "disp" parameter twice: unsigned int __disp_h = ((u32)disp) & 0xff000; unsigned int __disp_l = ((u32)disp) & 0x00fff; The EMIT6_DISP_LH is used several times with EMIT_CONST_U64() as "disp" parameter. Therefore always two constants are created per usage of EMIT6_DISP_LH. Fix this and add variable "_disp" to avoid multiple expansions. * v2: Move "_disp" to _EMIT6_DISP_LH as suggested by Joe Perches Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/bpf: clear correct BPF accumulator registerMichael Holzheu2015-07-291-7/+7
| | | | | | | | | | | | | | | | | | | | Currently we assumed the following BPF to eBPF register mapping: - BPF_REG_A -> BPF_REG_7 - BPF_REG_X -> BPF_REG_8 Unfortunately this mapping is wrong. The correct mapping is: - BPF_REG_A -> BPF_REG_0 - BPF_REG_X -> BPF_REG_7 So clear the correct registers and use the BPF_REG_A and BPF_REG_X macros instead of BPF_REG_0/7. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM: net: add support for BPF_ANC | SKF_AD_HATYPE in ARM JIT.Nicolas Schichan2015-07-272-2/+23
| | | | | Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM: net: add support for BPF_ANC | SKF_AD_PAY_OFFSET in ARM JIT.Nicolas Schichan2015-07-271-0/+8
| | | | | Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM: net: add support for BPF_ANC | SKF_AD_PKTTYPE in ARM JIT.Nicolas Schichan2015-07-271-0/+11
| | | | | Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-07-23197-1094/+1064
|\ | | | | | | | | | | | | | | | | | | Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-07-221-13/+44
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Don't use shared bluetooth antenna in iwlwifi driver for management frames, from Emmanuel Grumbach. 2) Fix device ID check in ath9k driver, from Felix Fietkau. 3) Off by one in xen-netback BUG checks, from Dan Carpenter. 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann. 5) Fix races in setting peeked bit flag in SKBs during datagram receive. If it's shared we have to clone it otherwise the value can easily be corrupted. Fix from Herbert Xu. 6) Revert fec clock handling change, causes regressions. From Fabio Estevam. 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG Cong. 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.) from WANG Cong and Konstantin Khlebnikov. 9) Memory leak in act_bpf packet action, from Alexei Starovoitov. 10) ARM bpf JIT bug fixes from Nicolas Schichan. 11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from Michael S Tsirkin. 12) Destruction of bond with different ARP header types not handled correctly, fix from Nikolay Aleksandrov. 13) Revert GRO receive support in ipv6 SIT tunnel driver, causes regressions because the GRO packets created cannot be processed properly on the GSO side if we forward the frame. From Herbert Xu. 14) TCCR update race and other fixes to ravb driver from Sergei Shtylyov. 15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet. 16) Fix panics on packet scheduler filter replace, from Daniel Borkmann. 17) Make sure AF_PACKET sees properly IP headers in defragmented frames (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee. 18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) ravb: fix ring memory allocation net: phy: dp83867: Fix warning check for setting the internal delay openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes netlink: don't hold mutex in rcu callback when releasing mmapd ring ARM: net: fix vlan access instructions in ARM JIT. ARM: net: handle negative offsets in BPF JIT. ARM: net: fix condition for load_order > 0 when translating load instructions. tcp: suppress a division by zero warning drivers: net: cpsw: remove tx event processing in rx napi poll inet: frags: fix defragmented packet's IP header for af_packet net: mvneta: fix refilling for Rx DMA buffers stmmac: fix setting of driver data in stmmac_dvr_probe sched: cls_flow: fix panic on filter replace sched: cls_flower: fix panic on filter replace sched: cls_bpf: fix panic on filter replace net/mdio: fix mdio_bus_match for c45 PHY net: ratelimit warnings about dst entry refcount underflow or overflow caif: fix leaks and race in caif_queue_rcv_skb() qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355 ravb: fix race updating TCCR ...
| | * ARM: net: fix vlan access instructions in ARM JIT.Nicolas Schichan2015-07-221-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG and LD_VLAN_TAG_PRESENT tests pass. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ARM: net: handle negative offsets in BPF JIT.Nicolas Schichan2015-07-221-9/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, the JIT would reject negative offsets known during code generation and mishandle negative offsets provided at runtime. Fix that by calling bpf_internal_load_pointer_neg_helper() appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing the execution flow to the slow path helpers when the offset is negative. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ARM: net: fix condition for load_order > 0 when translating load instructions.Nicolas Schichan2015-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To check whether the load should take the fast path or not, the code would check that (r_skb_hlen - load_order) is greater than the offset of the access using an "Unsigned higher or same" condition. For halfword accesses and an skb length of 1 at offset 0, that test is valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path is taken and the filter allows the load to wrongly succeed. A similar issue exists for word loads at offset 0 and an skb length of less than 4. Fix that by using the condition "Signed greater than or equal" condition for the fast path code for load orders greater than 0. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge tag 'arm64-fixes' of ↵Linus Torvalds2015-07-222-4/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull ARM64 fixes from Catalin Marinas: - arm64 build fix following the move of the thread_struct to the end of task_struct and the asm offsets becoming too large for the AArch64 ISA - preparatory patch for moving irq_data struct members (applied now to reduce dependency for the next merging window) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64/irq: Use access helper irq_data_get_affinity_mask() arm64: switch_to: calculate cpu context pointer using separate register
| | * | ARM64/irq: Use access helper irq_data_get_affinity_mask()Jiang Liu2015-07-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a preparatory patch for moving irq_data struct members. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| | * | arm64: switch_to: calculate cpu context pointer using separate registerWill Deacon2015-07-221-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0c8c0f03e3a2 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") moved the thread_struct to the bottom of task_struct. As a result, the offset is now too large to be used in an immediate add on arm64 with some kernel configs: arch/arm64/kernel/entry.S: Assembler messages: arch/arm64/kernel/entry.S:588: Error: immediate out of range arch/arm64/kernel/entry.S:597: Error: immediate out of range This patch calculates the offset using an additional register instead of an immediate offset. Fixes: 0c8c0f03e3a2 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2015-07-203-14/+18
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Martin Schwidefsky: "Fast path fix for the thread_struct breakage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: adapt entry.S to the move of thread_struct
| | * | | s390: adapt entry.S to the move of thread_structMartin Schwidefsky2015-07-203-14/+18
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a "x86/fpu, sched: Dynamically allocate 'struct fpu'" moved the thread_struct to the end of the task_struct. This causes some of the offsets used in entry.S to overflow their instruction operand field. To fix this use aghi to create a dedicated pointer for the thread_struct. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * / / AVR32/time: Migrate to new 'set-state' interfaceViresh Kumar2015-07-201-32/+33
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate avr32 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We want to call cpu_idle_poll_ctrl() in shutdown only if we were in oneshot or resume state earlier. Create another variable to save this information and check that in shutdown callback. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
| * | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-07-199-29/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. Things are looking quite decent at this stage but the recent work on the FPU support took its toll: - fix an incorrect overly restrictive ifdef - select O32 64-bit FP support for O32 binary compatibility - remove workarounds for Sibyte SB1250 Pass1 parts. There are rare fixing the workarounds is not worth the effort. - patch up an outdated and now incorrect comment" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU MIPS: SB1: Remove support for Pass 1 parts. MIPS: Require O32 FP64 support for MIPS64 with O32 compat MIPS: asm-offset.c: Patch up various comments refering to the old filename.
| | * | MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPUMarkos Chandras2015-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Fixes: 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: SB1: Remove support for Pass 1 parts.Ralf Baechle2015-07-146-25/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass 1 parts had a number of significant erratas and were only available in small numbers and under NDA. Full support also required the use of a special toolchain that kept branches properly aligned. These workarounds were never upstreamed and the only toolchain known to have them is Montavista's GCC 3.0-based toolchain which completly obsoleted if not useless these days. So now that automated testing has tripped over the user of the -msb1-pass1-workarounds option, rather than fixing it remove support for pass 1 parts. Probably nobody will notice. I seem to own the last know pass 1 board and I haven't noticed another one in the wild in the past decade, at least. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Require O32 FP64 support for MIPS64 with O32 compatPaul Burton2015-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MIPS32r6 code requires FP64 (ie. FR=1) support. Building a kernel with support for MIPS32r6 binaries but without support for O32 with FP64 is therefore a problem which can lead to incorrectly executed userland. CONFIG_MIPS_O32_FP64_SUPPORT is already selected when the kernel is configured for MIPS32r6, but not when the kernel is configured for MIPS64r6 with O32 compat support. Select CONFIG_MIPS_O32_FP64_SUPPORT in such configurations to prevent building kernels which execute MIPS32r6 userland incorrectly. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # v4.0- Cc: linux-mips@linux-mips.org Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: asm-offset.c: Patch up various comments refering to the old filename.Ralf Baechle2015-07-142-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/mips/tools/offset.c was renamed to arch/mips/kernel/asm-offsets.c for v2.6.14. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | Merge branch 'parisc-4.2-2' of ↵Linus Torvalds2015-07-191-1/+2
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "A memory leak fix from Christophe Jaillet which was introduced with kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days" * 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: mm: Fix a memory leak related to pmd not attached to the pgd
| | * | | parisc: mm: Fix a memory leak related to pmd not attached to the pgdChristophe Jaillet2015-07-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0e0da48dee8d ("parisc: mm: don't count preallocated pmds") introduced a memory leak. After this commit, the 'return' statement in pmd_free is executed in all cases. Even for pmd that are not attached to the pgd. So 'free_pages' can never be called anymore, leading to a memory leak. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Helge Deller <deller@gmx.de>
| * | | | Merge tag 'armsoc-fixes' of ↵Linus Torvalds2015-07-1934-57/+178
| |\ \ \ \ | | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "By far most of the fixes here are updates to DTS files to deal with some mostly minor bugs. There's also a fix to deal with non-PM kernel configs on i.MX, a regression fix for ethernet on PXA platforms and a dependency fix for OMAP" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: dts: rename pcie nodes to help override status ARM: keystone: dts: fix dt bindings for PCIe ARM: pxa: fix dm9000 platform data regression ARM: dts: Correct audio input route & set mic bias for am335x-pepper ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX MAINTAINERS: digicolor: add dts files ARM: ux500: fix MMC/SD card regression ARM: ux500: define serial port aliases ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs ARM: dts: Fix frequency scaling on Gumstix Pepper ARM: dts: configure regulators for Gumstix Pepper ARM: dts: omap3: overo: Update LCD panel names ARM: dts: cros-ec-keyboard: Add support for some Japanese keys ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set ARM: dts: imx53-qsb: fix TVE entry ARM: dts: mx23: fix iio-hwmon support ARM: dts: imx27: Adjust the GPT compatible string ARM: socfpga: dts: Fix entries order ARM: socfpga: dts: Fix adxl34x formating and compatible string
| | * | | Merge tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux into fixesDOlof Johansson2015-07-199-0/+24
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge "pxa fixes for v4.2" from Robert Jarzmik: ARM: pxa: fixes for v4.2-rc2 This single fix reenables ethernet cards for several pxa boards, broken by regulator addition to dm9000 driver. * tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux: ARM: pxa: fix dm9000 platform data regression
| | | * | | ARM: pxa: fix dm9000 platform data regressionRobert Jarzmik2015-07-169-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dm9000 driver added support for a vcc regulator, platform data based platforms have their ethernet broken, as the regulator claiming returns -EPROBE_DEFER and prevents dm9000 loading. This patch fixes this for all pxa boards using dm9000, by using the specific regulator_has_full_constraints() function. This was discovered and tested on the cm-x300 board. Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| | * | | | Merge tag 'keystone-dts-fixes' of ↵Olof Johansson2015-07-172-2/+4
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes Merge "ARM: Couple of dts fixes for v4.2-rcx" from Santosh Shilimkar: Couple of DTS fixes 4.2-rcx for Keystone EVMs: K2E EVM boot hangs because of missing serdes driver which is needed to bring up PCIe on K2E. These couple of fixes makes the PCIE disabled on common default and let the specific board DTS to enable it. * tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: keystone: dts: rename pcie nodes to help override status ARM: keystone: dts: fix dt bindings for PCIe Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | ARM: keystone: dts: rename pcie nodes to help override statusMurali Karicheri2015-07-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that PCIe DT binding is disabled in SoC specific DTS, we need a way to override it in a board specific DTS. So rename the PCIe nodes accordingly. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
| | | * | | | ARM: keystone: dts: fix dt bindings for PCIeMurali Karicheri2015-07-172-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently PCIe DT bindings are broken. PCIe driver can't function without having a SerDes driver that provide the phy configuration. On K2E EVM, this causes problem since the EVM has Marvell SATA controller present and with default values in the SerDes register, it seems to pass the PCIe link check, but causes issues since the configuration is not correct. The manifestation is that when EVM is booted with NFS rootfs, the boot hangs. We shouldn't enable PCIe on this EVM since to work, SerDes driver has to be present as well. So by default, the PCIe DT binding should be disabled in SoC specific DTS. It can be enabled in the board specific DTS when the SerDes device driver is also present. So fix the status of PCIe DT bindings in the SoC specific DTS to "disabled". To enable PCIe, the status should be set to "ok" in the EVM DTS file when SerDes driver support becomes available in the upstream tree. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
| | * | | | | Merge tag 'omap-for-v4.2/fixes-rc2-v2' of ↵Olof Johansson2015-07-1579-479/+815
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps, all dts changes except for one: - Fix up LCD panel name for overo boards - Three fixes for pepper board for regulators, freqeuncy scaling and audio input. Note that there is still one issue being worked on for booting with multi_v7_defconfig - Add missing #iommu-cells for omap4 and 5 - Add missing HAVE_ARM_SCU for am43xx * tag 'omap-for-v4.2/fixes-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (210 commits) ARM: dts: Correct audio input route & set mic bias for am335x-pepper ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs ARM: dts: Fix frequency scaling on Gumstix Pepper ARM: dts: configure regulators for Gumstix Pepper ARM: dts: omap3: overo: Update LCD panel names + Linux 4.2-rc2 Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | ARM: dts: Correct audio input route & set mic bias for am335x-pepperAdam YH Lee2015-07-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Audio-in was incorrectly routed to Line In. It should be Mic3L as per schematic. Using mic-bias voltage at 2.0v (<0x1>) does not work for some reason. There is no voltage seen on micbias (R127). Mic-bias voltage of 2.5v (<0x2>) works. I see voltage of 2.475v across GND and micbias. With these changes, I can record audio with a pair of proliferate TRRS earbuds. Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Acked-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XXDave Gerlach2015-07-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HAVE_ARM_SCU only gets selected if CONFIG_SMP is selected in an OMAP system, however AM43XX needs this option regardless of CONFIG_SMP and also for an AM43XX only build as it is important for controlling power in the SoC. Without this we cannot suspend the CPU for SoC suspend or cpuidle. The ARM Cortex A9 needs SCU CPU Power Status bits to be set to off mode in order for the PRCM to transition the MPU to low power modes. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | ARM: dts: OMAP5: Add #iommu-cells property to IOMMUsSuman Anna2015-07-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing #iommu-cells property to the DSP and IPU IOMMU nodes for OMAP5 platforms. This property is required as per the generic iommu binding. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | ARM: dts: OMAP4: Add #iommu-cells property to IOMMUsSuman Anna2015-07-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing #iommu-cells property to the DSP and IPU IOMMU nodes for OMAP4 platforms. This property is required as per the generic iommu binding. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | ARM: dts: Fix frequency scaling on Gumstix PepperArun Bharadwaj2015-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device tree for Gumstix Pepper has DCDC2 and DCDC3 correctly labelled but the upper limit values are wrong. The confusion is due to the hardware quirk where the DCDC2 and DCDC3 wires are flipped in Pepper. Signed-off-by: Arun Bharadwaj <arun@gumstix.com> Tested-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | ARM: dts: configure regulators for Gumstix PepperAdam YH Lee2015-07-141-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot process is halting in midway because some of the necessary voltage regulators are deemed unused and subsequently powered off, leading to a completely unresponsive system. Most of the device nodes had correct voltage regulator attachments. Yet these nodes had to set stricter enforcement on them through 'regulator-boot-on' and 'regulator-always-on' to function correctly. The consumers of the regulators this commit affect are the followings: DCDC1: vdd_1v8 system supply, USB-PHY, and ADC DCDC2: Core domain DCDC3: MPU core domain LDO1: RTC LDO2: 3v3 IO domain LDO3: USB-PHY; not a boot-time requirement LDO4: LCD [16:23] All but LDO3 need to be always-on for the system to be functional. Additionally regulator-name properties have been added for the kernel to display the name from the schematic. This will improve diagnostics. Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | | | | ARM: dts: omap3: overo: Update LCD panel namesAdam YH Lee2015-07-142-2/+2
| | | | |_|/ / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Gumstix Overo COMs, the u-boot bootloader typically passes an argument specifying the default display via the omapdss.def_disp parameter. When a default display is specified, DSS2 tries to match this name with either the device tree label (e.g. label=dvi) or, failing this, the device tree alias (e.g. label=display0). Update the panel names for the 'lcd43' and 'lcd35' displays in the device tree such that they match the names passed by u-boot. Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | Merge tag 'imx-fixes-4.2' of ↵Olof Johansson2015-07-154-29/+16
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 4.2" from Shawn Guo: The i.MX fixes for 4.2: - Correct compatible string for i.MX27 GPT which actually shares the same programming model as i.MX21 GPT rather than i.MX1 one. - Add missing #io-channel-cells property for i.MX23 LRADC device, which is required for the device to be an IIO provider. - Correct HSYNC/VSYNC pins and add ddc-i2c-bus property for TVE device on imx53-qsb to work properly. - Always enable PU domain if CONFIG_PM is not set. This fixes a couple of failure scenarios which will hang the system if one of the devices in the PU domain is accessed. * tag 'imx-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set ARM: dts: imx53-qsb: fix TVE entry ARM: dts: mx23: fix iio-hwmon support ARM: dts: imx27: Adjust the GPT compatible string Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | | ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not setLucas Stach2015-07-081-21/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_PM is not set the PU power domain needs to be enabled always, otherwise there are two failure scenarios which will hang the system if one of the devices in the PU domain is accessed. 1. New DTs (4.1+) drop the "always-on" property from the PU regulator, so if it isn't properly enabled by the GPC code it will be disabled at the end of boot. 2. If the bootloader already disabled the PU domain the GPC explicitly needs to enable it again, even if the kernel doesn't do any power management. This is a bit hypothetical, as it requires to boot a mainline kernel on a downstream bootloader, as no mainline bootloader disables the PM domains. Cc: <stable@vger.kernel.org> # 4.1 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | | * | | | | ARM: dts: imx53-qsb: fix TVE entryPhilipp Zabel2015-07-081-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct HSYNC/VSYNC pins and add ddc-i2c-bus property Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | | * | | | | ARM: dts: mx23: fix iio-hwmon supportStefan Wahren2015-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to get iio-hwmon support, the lradc must be declared as an iio provider. So fix this issue by adding the #io-channel-cells property. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: bd798f9c7b30 ("ARM: dts: mxs: Add iio-hwmon to mx23 soc") Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | | * | | | | ARM: dts: imx27: Adjust the GPT compatible stringFabio Estevam2015-07-081-6/+6
| | | | |_|/ / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | include/soc/imx/timer.h describes well the different versions of the GPT block among the imx family: enum imx_gpt_type { GPT_TYPE_IMX1, /* i.MX1 */ GPT_TYPE_IMX21, /* i.MX21/27 */ GPT_TYPE_IMX31, /* i.MX31/35/25/37/51/6Q */ GPT_TYPE_IMX6DL, /* i.MX6DL/SX/SL */ }; So the proper compatible string for the MX27 case should be "fsl,imx21-gpt". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | | | Merge tag 'socfpga_fixes_for_v4.2-rc1' of ↵Olof Johansson2015-07-141-13/+13
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes Merge "SoCFPGA fixes for v4.2-rc1" from Dinh Nguyen: SoCFPGA fixes against v4.2-rc1 - Update compatible "adxl345x" compatible string - Alphabetize the DTS nodes for the C5 sockit board file * tag 'socfpga_fixes_for_v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: Fix entries order ARM: socfpga: dts: Fix adxl34x formating and compatible string
| | | * | | | | ARM: socfpga: dts: Fix entries orderWalter Lozano2015-07-071-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reorders the nodes alphabetically Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| | | * | | | | ARM: socfpga: dts: Fix adxl34x formating and compatible stringWalter Lozano2015-07-071-4/+4
| | | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the formating of DTS bindings for the adxl34x digital accelerometer, and updates the compatible string after the deprecation of "adxl345x" compatible string. Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| | * | | | | ARM: ux500: fix MMC/SD card regressionLinus Walleij2015-07-144-5/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ux500 is regressing due to commit a21763a0b1e5a5ab8310f581886d04beadc16616 "pinctrl: nomadik: activate strict mux mode" which disallows Nomadik GPIO 5 to be muxed in as a level shifter voltage select pin, as it is currently described as being used for RX on UART1. The behaviour is correct, instead the hardware config has been incorrecly specified: UART1 is indeed unused on HREFv60plus and Snowball and that is why HREFv60plus can use the pins it would normally occupy as the voltage select line for the MMC/SD levelshifter (Snowball uses it for I2C4). The reason UART1 was anyway enabled on these platforms was probably to secure the port enumeration to userspace. This can be solved by using aliases (done in a separate patch) so we can now deactivate UART1 and let MMC/SD use it properly on HREFv60plus. We explicitly activate it only for the older HREFprev60 board. To complete, we set up the pin configuration for these pins properly in the sdi0 node. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | ARM: ux500: define serial port aliasesLinus Walleij2015-07-148-3/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enumerates the PL011 serial ports on the Ux500. This is necessary to do if we want to remove one of the serial ports, since userspace depends on console to be present on ttyAMA2 and we must not break userspace. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 15:44:47 +0100