summaryrefslogtreecommitdiffstats
path: root/arch (follow)
Commit message (Collapse)AuthorAgeFilesLines
* omap3/4: uart: fix full-fifo write abortSantosh Shilimkar2010-02-231-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is addition to the already merged commit on non-empty uart fifo read abort. "ce13d4716a276f4331d78ba28a5093a63822ab95" OMAP3630 and OMAP4430 UART IP blocks have a restriction on TX FIFO too. If you try to write to the tx fifo when it is full, the system aborts. More details on this thread are here: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg19447.html This can be easily reproducible by not suppressing interconnect errors or long duration testing where continuous prints over console from multiple threads. This patch is addressing the issue by ensuring that write is not issued while fifo is full. A timeout is added to avoid any hang on fifo-full for 10 mS which is unlikely case. Patch is validated on OMAP3630 and OMAP4 SDP. V2 version removed the additional 1 uS on every TX as per Tony's suggestion Signed-off-by: Woodruff Richard <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: Ghorai Sukumar <s-ghorai@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap4: multi-omap: Allow build to workSantosh Shilimkar2010-02-231-1/+3
| | | | | | | | | | | | | | | | The musb support is enabled in omap3 platforms. For omap4 only board support is available and the driver still isn't supported. Because of this build with omap3_defconfig used for multi-omap doesn't work on omap4430 sdp. This patch avoids usb_musb_init() by adding a cpu check in the board file. Thanks to Anand Gadiyar and Mankad Maulik for the suggestion of patching board file instead of musb driver. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* McBSP: OMAP3: Add sidetone featureEero Nurkkala2010-02-233-1/+463
| | | | | | | | | | | Add sidetone feature to McBSP instances 2 and 3 on OMAP3 based devices. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: Add USB support to 4430 SDP board fileMaulik Mankad2010-02-233-2/+18
| | | | | | | | | | | | | | | | | | | | This patch adds support for Mentor USB to 4430 SDP board file. It also defines the base address for HS USB OTG controller in OMAP4. Also updates platform specfic structure with base address and IRQ details. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: remove unnecessary returnFelipe Balbi2010-02-201-3/+1
| | | | | | | | trivial patch, no functional changes. Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: remove unused dma dataFelipe Balbi2010-02-201-3/+0
| | | | | | | | | we don't use those anywhere on musb driver, so let's remove those old stuff. Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: remove unused soft_con fieldFelipe Balbi2010-02-201-1/+0
| | | | | | | | remove unused data. Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap: musb: we can use clk frameworkFelipe Balbi2010-02-201-22/+0
| | | | | | | | | ... in order to handle musb's clock. Let's start removing the old musb-only set_clock function. Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: remove unused dataFelipe Balbi2010-02-201-34/+0
| | | | | | | | eps_bits wasn't being used anywhere, let's remove it. Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: Pass board specific data from board fileMaulik Mankad2010-02-2015-16/+106
| | | | | | | | | | | | | | | | | | Pass board specific data for MUSB (like interface_type, mode etc) from board file by defining board specific structure. Each board file can define this structure based on its requirement and pass this information to the driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gupta Ajay Kumar <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: omap: musb: ioremap only what's oursFelipe Balbi2010-02-201-1/+1
| | | | | | | | omap3430 TRM says the OTG address space is 4k, not 8k. Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: musb: Remove #ifdef from board-omap3evm.cMaulik Mankad2010-02-201-2/+2
| | | | | | | | | | | This patch removes #ifdef around usb_nop_xceiv_register() from board-omap3evm.c Signed-off-by: Maulik Mankad <x0082077@ti.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3EVM: PM: Update defconfigSanjeev Premi2010-02-201-2/+4
| | | | | | | | | | | This patch updates the omap3_evm_defconfig to select these options: * CONFIG_PM_DEBUG * CONFIG_DEBUG_FS * CONFIG_OMAP_SMARTREFLEX Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Add devkit8000_defconfigThomas Weber2010-02-201-0/+1889
| | | | | | | This patch adds a default config for the Timll Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Add minimal support for DevKit8000Thomas Weber2010-02-203-0/+697
| | | | | | | | | | | | These patches add board support for the Timll DevKit8000. The DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* AM3517: Enable I2C-GPIO Expander driver support for AM3517EVMVaibhav Hiremath2010-02-201-2/+38
| | | | | | | | | | | | Add platform hook-up interface to support I2C based GPIo expander (TCA6416). There are 3 instances of I2C Expander on AM3517EVM, - One is over I2C-2 mounted on Base board - Two are over I2C3 mounted on UI Card Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* AM3517: Enable RTC driver support for AM3517EVMVaibhav Hiremath2010-02-201-0/+39
| | | | | | | Add platform hook-up interface to support RTC driver (S35390A). Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* AM3517: Enable basic I2C SupportVaibhav Hiremath2010-02-201-0/+11
| | | | | | | | Add basic I2C board Hook-up support, where all the 3 I2C instances are getting registered. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* IGEPv2: Use Red Led1 as Heartbeat if configuredJonas Zetterberg2010-02-201-2/+28
| | | | | | | If not configured it will be exported as normal GPIO led. Signed-off-by: Jonas Zetterberg <jozz@jozz.se> Signed-off-by: Tony Lindgren <tony@atomide.com>
* IGEPv2: Added WIFI supportJonas Zetterberg2010-02-201-0/+40
| | | | | | | | | Enabled VMMC2 LDO voltage regulator on TWL4030. Added GPIO's (power down and reset) for WIFI chip. Signed-off-by: Anders Hedlund <anders.j.hedlund@gmail.com> Signed-off-by: Jonas Zetterberg <jozz@jozz.se> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Update defconfig for IGEP v2 to allow new drivers andfeaturesEnric Balletbo i Serra2010-02-201-216/+309
| | | | | Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Use timing data for omap2_init_common_hw on IGEP v2Enric Balletbo i Serra2010-02-201-1/+2
| | | | | Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: SDRC: add timing data for Numonyx M65KxxxxAMEnric Balletbo i Serra2010-02-181-0/+51
| | | | | | | | Add timing data for the Numonyx M65KxxxxAM SDRAM chip, used on the IGEP v2 board. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Add support for flash on IGEP v2 boardEnric Balletbo i Serra2010-02-181-0/+101
| | | | | | | | This patch adds support for flashes on IGEP v2 boards. For now only OneNAND is supported. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Enable DSS2 for IGEP v2 boardEnric Balletbo i Serra2010-02-181-0/+75
| | | | | Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Add platform init code for EHCI driver on IGEP v2Enric Balletbo i Serra2010-02-181-0/+12
| | | | | | | Add platform init code for EHCI driver on IGEP v2 Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Fix typo on IGEP v2 boardEnric Balletbo i Serra2010-02-181-1/+1
| | | | | | | Fix typo on IGEP v2 board Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: Add platform data for the twl4030_codec MFD on IGEP v2Enric Balletbo i Serra2010-02-181-0/+10
| | | | | | | Add platform data for the twl4030_codec MFD on IGEP v2 Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: pandora: update defconfigGrazvydas Ignotas2010-02-181-165/+513
| | | | | | | Enable DSS2 and update defconfig for current kernel. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3: pandora: update regulator setupGrazvydas Ignotas2010-02-181-33/+78
| | | | | | | | | | Update pandora's regulator setup: - add new regulators: VAUX2, VAUX4 and VSIM - add new consumers: ads7846, nub controllers, USB PHY, audio DAC - use dev names instead of struct device pointers Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: pandora: add DSS2 support and related regulatorsGrazvydas Ignotas2010-02-181-0/+111
| | | | | | | | | This patch adds configuration data for DSS2 and sets up display related regulators. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3evm: Configure GPIO175 for touchscreen PEN_IRQSanjeev Premi2010-02-181-1/+3
| | | | | | | | GPIO175 is used for PEN_IRQ on the EVM. This patch sets the mux settings for the same. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3evm: Fixes after moving to matrix_keypadSanjeev Premi2010-02-181-12/+15
| | | | | | | | | | | The keypad was not working properly after migrating to matrix_keypad. Swapped the row, col fields of the KEY() macro in the keymap definition to get it working again. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap3evm: Add mux settings for keypadSanjeev Premi2010-02-181-0/+4
| | | | | | | | This patch sets SYS_NIRQ for keypad input. It also sets the same as a wakeup event from OFF mode. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: zoom3: enable ehci supportvikram pandita2010-02-171-0/+14
| | | | | | | | | Zoom3 board has omap3630 EHCI port2 connected to a ULPI phy. GPIO_64 is connected to the PHY reset pin. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-fixes-for-linus' into omap-for-linusTony Lindgren2010-02-1732-273/+865
|\
| * omap: Remove DEBUG_FS dependency for mux name checkingRanjith Lohithakshan2010-02-171-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for a valid mux name should be performed regardless of whether DEBUG_FS is enabled or not. Otherwise without DEBUG_FS, we get: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.33-rc8 #10) PC is at strcmp+0x18/0x40 LR is at omap_mux_init_signal+0x68/0x14c ... This fixes the issue currently seen with boards not booting up if DEBUG_FS is not enabled in defconfig. Note that the earlier ifndef + ifdef now becomes simpler ifdef else: If CONFIG_OMAP_MUX is selected, we use pin names. If it's not selected, we only want the GPIO to mux register mapping. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * parisc: fix tracing of signalsKyle McMartin2010-02-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Mike Frysinger pointed out that calling tracehook_signal_handler with stepping=0 missed testing the thread flags, resulting in not calling ptrace_notify. Fix this by testing if we're single stepping or branch stepping and setting the flag accordingly. Tested, seems to work. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2010-02-111-1/+6
| |\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: hsmmc: fix memory leak
| * \ Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds2010-02-116-194/+736
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Don't probe reserved EntryHi bits. MIPS: SNI: Correct NULL test MIPS: Fix __devinit __cpuinit confusion in cpu_cache_init MIPS: IP27: Make defconfig useful again. MIPS: Fixup of the r4k timer
| | * | MIPS: Don't probe reserved EntryHi bits.David Daney2010-02-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch that adds cpu_probe_vmbits is erroneously writing to reserved bit 12. Since we are really only probing high bits, don't write this bit with a one. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Guenter Roeck <guenter.roeck@ericsson.com> Patchwork: http://patchwork.linux-mips.org/patch/949/ Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: SNI: Correct NULL testJulia Lawall2010-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/945/ Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Fix __devinit __cpuinit confusion in cpu_cache_initDavid Daney2010-02-102-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cpu_cache_init and the things it calls should all be __cpuinit instead of __devinit. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: IP27: Make defconfig useful again.Ralf Baechle2010-02-101-188/+729
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RTC support was rewritten but the defconfig files were not updated. Enable IPv6 support which for some folks already is a must have. Assign useful values to other new options. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Fixup of the r4k timerWu Zhangjin2010-02-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Maxime Bizon, the commit "MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs" have broken the r4k timer since it didn't initialize the cp0_compare_irq_shift variable used in c0_compare_int_pending() on the architectures whose cpu_has_mips_r2 is false. This patch fixes it via initializing the cp0_compare_irq_shift as the cp0_compare_irq used in the old c0_compare_int_pending(). Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: David VomLehn <dvomlehn@cisco.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/922/ Tested-by: Shane McDonald <mcdonald.shane@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2010-02-118-37/+31
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUs x86-32: Make AT_VECTOR_SIZE_ARCH=2 x86/agp: Fix amd64-agp module initialization regression x86, doc: Fix minor spelling error in arch/x86/mm/gup.c
| | * | | x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUsSuresh Siddha2010-02-106-34/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to fall back from logical-flat APIC mode to physical-flat mode when we have more than 8 CPUs. However, in the presence of CPU hotplug(with bios listing not enabled but possible cpus as disabled cpus in MADT), we have to consider the number of possible CPUs rather than the number of current CPUs; otherwise we may cross the 8-CPU boundary when CPUs are added later. 32bit apic code can use more cleanups (like the removal of vendor checks in 32bit default_setup_apic_routing()) and more unifications with 64bit code. Yinghai has some patches in works already. This patch addresses the boot issue that is reported in the virtualization guest context. [ hpa: incorporated function annotation feedback from Yinghai Lu ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com> Acked-by: Shaohui Zheng <shaohui.zheng@intel.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | | x86-32: Make AT_VECTOR_SIZE_ARCH=2Serge E. Hallyn2010-02-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both x86-32 and x86-64 with 32-bit compat use ARCH_DLINFO_IA32, which defines two saved_auxv entries. But system.h only defines AT_VECTOR_SIZE_ARCH as 2 for CONFIG_IA32_EMULATION, not for CONFIG_X86_32. Fix that. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> LKML-Reference: <20100209023502.GA15408@us.ibm.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | | x86, doc: Fix minor spelling error in arch/x86/mm/gup.cAndy Shevchenko2010-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix minor spelling error in comment. No code change. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> LKML-Reference: <201002022238.o12McDiF018720@imap1.linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2010-02-115-14/+20
| |\ \ \ \ | | |_|/ / | |/| | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix thinko in previous change. sparc: Align clone and signal stacks to 16 bytes.
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 21:59:30 +0100