| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes
This set of patches fixes regressions introduced in v5.2 kernel when DA8xx
OHCI driver was converted over to use GPIO regulators.
* tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da830-evm: fix GPIO lookup for OHCI
ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
ARM: davinci: da830-evm: add missing regulator constraints for OHCI
+ Linux 5.2-rc7
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The fixed regulator driver doesn't specify any con_id for gpio lookup
so it must be NULL in the table entry.
Fixes: 274e4c336192 ("ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
We need to enable status changes for the fixed power supply for the USB
controller.
Fixes: 1d272894ec4f ("ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
We need to enable status changes for the fixed power supply for the USB
controller.
Fixes: 274e4c336192 ("ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a regression in my commit adding KUAP (Kernel User Access
Prevention) on Radix, which incorrectly touched the AMR in the early
machine check handler.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/exception: Fix machine check early corrupting AMR
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The early machine check runs in real mode, so locking is unnecessary.
Worse, the windup does not restore AMR, so this can result in a false
KUAP fault after a recoverable machine check hits inside a user copy
operation.
Fix this similarly to HMI by just avoiding the kuap lock in the
early machine check handler (it will be set by the late handler that
runs in virtual mode if that runs). If the virtual mode handler is
reached, it will lock and restore the AMR.
Fixes: 890274c2dc4c0 ("powerpc/64s: Implement KUAP for Radix MMU")
Cc: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes all over the place:
- might_sleep() atomicity fix in the microcode loader
- resctrl boundary condition fix
- APIC arithmethics bug fix for frequencies >= 4.2 GHz
- three 5-level paging crash fixes
- two speculation fixes
- a perf/stacktrace fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fall back to using frame pointers for generated code
perf/x86: Always store regs->ip in perf_callchain_kernel()
x86/speculation: Allow guests to use SSBD even if host does not
x86/mm: Handle physical-virtual alignment mismatch in phys_p4d_init()
x86/boot/64: Add missing fixup_pointer() for next_early_pgt access
x86/boot/64: Fix crash if kernel image crosses page table boundary
x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz
x86/resctrl: Prevent possible overrun during bitmap operations
x86/microcode: Fix the microcode load on CPU hotplug for real
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The ORC unwinder can't unwind through BPF JIT generated code because
there are no ORC entries associated with the code.
If an ORC entry isn't available, try to fall back to frame pointers. If
BPF and other generated code always do frame pointer setup (even with
CONFIG_FRAME_POINTERS=n) then this will allow ORC to unwind through most
generated code despite there being no corresponding ORC entries.
Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/b6f69208ddff4343d56b7bfac1fc7cfcd62689e8.1561595111.git.jpoimboe@redhat.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The stacktrace_map_raw_tp BPF selftest is failing because the RIP saved by
perf_arch_fetch_caller_regs() isn't getting saved by perf_callchain_kernel().
This was broken by the following commit:
d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
With that change, when starting with non-HW regs, the unwinder starts
with the current stack frame and unwinds until it passes up the frame
which called perf_arch_fetch_caller_regs(). So regs->ip needs to be
saved deliberately.
Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/3975a298fa52b506fea32666d8ff6a13467eee6d.1561595111.git.jpoimboe@redhat.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The bits set in x86_spec_ctrl_mask are used to calculate the guest's value
of SPEC_CTRL that is written to the MSR before VMENTRY, and control which
mitigations the guest can enable. In the case of SSBD, unless the host has
enabled SSBD always on mode (by passing "spec_store_bypass_disable=on" in
the kernel parameters), the SSBD bit is not set in the mask and the guest
can not properly enable the SSBD always on mitigation mode.
This has been confirmed by running the SSBD PoC on a guest using the SSBD
always on mitigation mode (booted with kernel parameter
"spec_store_bypass_disable=on"), and verifying that the guest is vulnerable
unless the host is also using SSBD always on mode. In addition, the guest
OS incorrectly reports the SSB vulnerability as mitigated.
Always set the SSBD bit in x86_spec_ctrl_mask when the host CPU supports
it, allowing the guest to use SSBD whether or not the host has chosen to
enable the mitigation in any of its modes.
Fixes: be6fcb5478e9 ("x86/bugs: Rework spec_ctrl base and mask logic")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: bp@alien8.de
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1560187210-11054-1-git-send-email-alejandro.j.jimenez@oracle.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Kyle has reported occasional crashes when booting a kernel in 5-level
paging mode with KASLR enabled:
WARNING: CPU: 0 PID: 0 at arch/x86/mm/init_64.c:87 phys_p4d_init+0x1d4/0x1ea
RIP: 0010:phys_p4d_init+0x1d4/0x1ea
Call Trace:
__kernel_physical_mapping_init+0x10a/0x35c
kernel_physical_mapping_init+0xe/0x10
init_memory_mapping+0x1aa/0x3b0
init_range_memory_mapping+0xc8/0x116
init_mem_mapping+0x225/0x2eb
setup_arch+0x6ff/0xcf5
start_kernel+0x64/0x53b
? copy_bootdata+0x1f/0xce
x86_64_start_reservations+0x24/0x26
x86_64_start_kernel+0x8a/0x8d
secondary_startup_64+0xb6/0xc0
which causes later:
BUG: unable to handle page fault for address: ff484d019580eff8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
BAD
Oops: 0000 [#1] SMP NOPTI
RIP: 0010:fill_pud+0x13/0x130
Call Trace:
set_pte_vaddr_p4d+0x2e/0x50
set_pte_vaddr+0x6f/0xb0
__native_set_fixmap+0x28/0x40
native_set_fixmap+0x39/0x70
register_lapic_address+0x49/0xb6
early_acpi_boot_init+0xa5/0xde
setup_arch+0x944/0xcf5
start_kernel+0x64/0x53b
Kyle bisected the issue to commit b569c1843498 ("x86/mm/KASLR: Reduce
randomization granularity for 5-level paging to 1GB")
Before this commit PAGE_OFFSET was always aligned to P4D_SIZE when booting
5-level paging mode. But now only PUD_SIZE alignment is guaranteed.
In the case I was able to reproduce the following vaddr/paddr values were
observed in phys_p4d_init():
Iteration vaddr paddr
1 0xff4228027fe00000 0x033fe00000
2 0xff42287f40000000 0x8000000000
'vaddr' in both cases belongs to the same p4d entry.
But due to the original assumption that PAGE_OFFSET is aligned to P4D_SIZE
this overlap cannot be handled correctly. The code assumes strictly aligned
entries and unconditionally increments the index into the P4D table, which
creates false duplicate entries. Once the index reaches the end, the last
entry in the page table is missing.
Aside of that the 'paddr >= paddr_end' condition can evaluate wrong which
causes an P4D entry to be cleared incorrectly.
Change the loop in phys_p4d_init() to walk purely based on virtual
addresses like __kernel_physical_mapping_init() does. This makes it work
correctly with unaligned virtual addresses.
Fixes: b569c1843498 ("x86/mm/KASLR: Reduce randomization granularity for 5-level paging to 1GB")
Reported-by: Kyle Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Pelton <kyle.d.pelton@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190624123150.920-1-kirill.shutemov@linux.intel.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
__startup_64() uses fixup_pointer() to access global variables in a
position-independent fashion. Access to next_early_pgt was wrapped into the
helper, but one instance in the 5-level paging branch was missed.
GCC generates a R_X86_64_PC32 PC-relative relocation for the access which
doesn't trigger the issue, but Clang emmits a R_X86_64_32S which leads to
an invalid memory access and system reboot.
Fixes: 187e91fe5e91 ("x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt'")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Link: https://lkml.kernel.org/r/20190620112422.29264-1-kirill.shutemov@linux.intel.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
A kernel which boots in 5-level paging mode crashes in a small percentage
of cases if KASLR is enabled.
This issue was tracked down to the case when the kernel image unpacks in a
way that it crosses an 1G boundary. The crash is caused by an overrun of
the PMD page table in __startup_64() and corruption of P4D page table
allocated next to it. This particular issue is not visible with 4-level
paging as P4D page tables are not used.
But the P4D and the PUD calculation have similar problems.
The PMD index calculation is wrong due to operator precedence, which fails
to confine the PMDs in the PMD array on wrap around.
The P4D calculation for 5-level paging and the PUD calculation calculate
the first index correctly, but then blindly increment it which causes the
same issue when a kernel image is located across a 512G and for 5-level
paging across a 46T boundary.
This wrap around mishandling was introduced when these parts moved from
assembly to C.
Restore it to the correct behaviour.
Fixes: c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190620112345.28833-1-kirill.shutemov@linux.intel.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The left shift of unsigned int cpu_khz will overflow for large values of
cpu_khz, so cast it to a long long before shifting it to avoid overvlow.
For example, this can happen when cpu_khz is 4194305, i.e. ~4.2 GHz.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: 8c3ba8d04924 ("x86, apic: ack all pending irqs when crashed/on kexec")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20190619181446.13635-1-colin.king@canonical.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
While the DOC at the beginning of lib/bitmap.c explicitly states that
"The number of valid bits in a given bitmap does _not_ need to be an
exact multiple of BITS_PER_LONG.", some of the bitmap operations do
indeed access BITS_PER_LONG portions of the provided bitmap no matter
the size of the provided bitmap.
For example, if find_first_bit() is provided with an 8 bit bitmap the
operation will access BITS_PER_LONG bits from the provided bitmap. While
the operation ensures that these extra bits do not affect the result,
the memory is still accessed.
The capacity bitmasks (CBMs) are typically stored in u32 since they
can never exceed 32 bits. A few instances exist where a bitmap_*
operation is performed on a CBM by simply pointing the bitmap operation
to the stored u32 value.
The consequence of this pattern is that some bitmap_* operations will
access out-of-bounds memory when interacting with the provided CBM.
This same issue has previously been addressed with commit 49e00eee0061
("x86/intel_rdt: Fix out-of-bounds memory access in CBM tests")
but at that time not all instances of the issue were fixed.
Fix this by using an unsigned long to store the capacity bitmask data
that is passed to bitmap functions.
Fixes: e651901187ab ("x86/intel_rdt: Introduce "bit_usage" to display cache allocations details")
Fixes: f4e80d67a527 ("x86/intel_rdt: Resctrl files reflect pseudo-locked information")
Fixes: 95f0b77efa57 ("x86/intel_rdt: Initialize new resource group with sane defaults")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/58c9b6081fd9bf599af0dfc01a6fdd335768efef.1560975645.git.reinette.chatre@intel.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
A recent change moved the microcode loader hotplug callback into the early
startup phase which is running with interrupts disabled. It missed that
the callbacks invoke sysfs functions which might sleep causing nice 'might
sleep' splats with proper debugging enabled.
Split the callbacks and only load the microcode in the early startup phase
and move the sysfs handling back into the later threaded and preemptible
bringup phase where it was before.
Fixes: 78f4e932f776 ("x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906182228350.1766@nanos.tec.linutronix.de
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Various fixes, most of them related to bugs perf fuzzing found in the
x86 code"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/regs: Use PERF_REG_EXTENDED_MASK
perf/x86: Remove pmu->pebs_no_xmm_regs
perf/x86: Clean up PEBS_XMM_REGS
perf/x86/regs: Check reserved bits
perf/x86: Disable extended registers for non-supported PMUs
perf/ioctl: Add check for the sample_period value
perf/core: Fix perf_sample_regs_user() mm check
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
We don't need pmu->pebs_no_xmm_regs anymore, the capabilities
PERF_PMU_CAP_EXTENDED_REGS can be used to check if XMM registers
collection is supported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Use generic macro PERF_REG_EXTENDED_MASK to replace PEBS_XMM_REGS to
avoid duplication.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The perf fuzzer triggers a warning which map to:
if (WARN_ON_ONCE(idx >= ARRAY_SIZE(pt_regs_offset)))
return 0;
The bits between XMM registers and generic registers are reserved.
But perf_reg_validate() doesn't check these bits.
Add PERF_REG_X86_RESERVED for reserved bits on X86.
Check the reserved bits in perf_reg_validate().
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers")
Link: https://lkml.kernel.org/r/1559081314-9714-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The perf fuzzer caused Skylake machine to crash:
[ 9680.085831] Call Trace:
[ 9680.088301] <IRQ>
[ 9680.090363] perf_output_sample_regs+0x43/0xa0
[ 9680.094928] perf_output_sample+0x3aa/0x7a0
[ 9680.099181] perf_event_output_forward+0x53/0x80
[ 9680.103917] __perf_event_overflow+0x52/0xf0
[ 9680.108266] ? perf_trace_run_bpf_submit+0xc0/0xc0
[ 9680.113108] perf_swevent_hrtimer+0xe2/0x150
[ 9680.117475] ? check_preempt_wakeup+0x181/0x230
[ 9680.122091] ? check_preempt_curr+0x62/0x90
[ 9680.126361] ? ttwu_do_wakeup+0x19/0x140
[ 9680.130355] ? try_to_wake_up+0x54/0x460
[ 9680.134366] ? reweight_entity+0x15b/0x1a0
[ 9680.138559] ? __queue_work+0x103/0x3f0
[ 9680.142472] ? update_dl_rq_load_avg+0x1cd/0x270
[ 9680.147194] ? timerqueue_del+0x1e/0x40
[ 9680.151092] ? __remove_hrtimer+0x35/0x70
[ 9680.155191] __hrtimer_run_queues+0x100/0x280
[ 9680.159658] hrtimer_interrupt+0x100/0x220
[ 9680.163835] smp_apic_timer_interrupt+0x6a/0x140
[ 9680.168555] apic_timer_interrupt+0xf/0x20
[ 9680.172756] </IRQ>
The XMM registers can only be collected by PEBS hardware events on the
platforms with PEBS baseline support, e.g. Icelake, not software/probe
events.
Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU
which support extended registers. For X86, the extended registers are
XMM registers.
Add has_extended_regs() to check if extended registers are applied.
The generic code define the mask of extended registers as 0 if arch
headers haven't overridden it.
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers")
Link: https://lkml.kernel.org/r/1559081314-9714-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Diverse irqchip driver fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix command queue pointer comparison bug
irqchip/mips-gic: Use the correct local interrupt map registers
irqchip/ti-sci-inta: Fix kernel crash if irq_create_fwspec_mapping fail
irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The MIPS GIC contains a block of registers used to map local interrupts
to a particular CPU interrupt pin. Since these registers are found at a
consecutive range of addresses we access them using an index, via the
(read|write)_gic_v[lo]_map accessor functions. We currently use values
from enum mips_gic_local_interrupt as those indices.
Unfortunately whilst enum mips_gic_local_interrupt provides the correct
offsets for bits in the pending & mask registers, the ordering of the
map registers is subtly different... Compared with the ordering of
pending & mask bits, the map registers move the FDC from the end of the
list to index 3 after the timer interrupt. As a result the performance
counter & software interrupts are therefore at indices 4-6 rather than
indices 3-5.
Notably this causes problems with performance counter interrupts being
incorrectly mapped on some systems, and presumably will also cause
problems for FDC interrupts.
Introduce a function to map from enum mips_gic_local_interrupt to the
index of the corresponding map register, and use it to ensure we access
the map registers for the correct interrupts.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: a0dc5cb5e31b ("irqchip: mips-gic: Simplify gic_local_irq_domain_map()")
Fixes: da61fcf9d62a ("irqchip: mips-gic: Use irq_cpu_online to (un)mask all-VP(E) IRQs")
Reported-and-tested-by: Archer Yan <ayan@wavecomp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
| | |\ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Four fixes:
- fix a kexec crash on arm64
- fix a reboot crash on some Android platforms
- future-proof the code for upcoming ACPI 6.2 changes
- fix a build warning on x86"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efibc: Replace variable set function in notifier call
x86/efi: fix a -Wtype-limits compilation warning
efi/bgrt: Drop BGRT status field reserved bits check
efi/memreserve: deal with memreserve entries in unmapped memory
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Compiling a kernel with W=1 generates this warning,
arch/x86/platform/efi/quirks.c:731:16: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
Fixes: 3425d934fc03 ("efi/x86: Handle page faults occurring while running ...")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: "Prakhya, Sai Praneeth" <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- hsdk platform unifying apertures
- build system CROSS_COMPILE prefix
* tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: unify memory apertures configuration
ARC: build: Try to guess CROSS_COMPILE with cc-cross-prefix
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
HSDK SoC has memory bridge which allows to configure memory map
for different AXI masters in runtime.
As of today we adjust memory apertures configuration in U-boot
so we have different configuration in case of loading kernel
via U-boot and JTAG.
It isn't really critical in case of existing platform configuration
as configuration differs for <currently> unused address space
regions or unused AXI masters. However we may face with this
issue when we'll bringup new peripherals or touch their address
space.
Fix that by perform full configuration of memory bridge in HSDK
platform code. Basically we simply copy memory bridge configuration
code from U-boot.
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | |/ / / / /
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
For a long time we used to hard-code CROSS_COMPILE prefix
for ARC until it started to cause problems, so we decided to
solely rely on CROSS_COMPILE externally set by a user:
commit 40660f1fcee8 ("ARC: build: Don't set CROSS_COMPILE in arch's Makefile").
While it works perfectly fine for build-systems where the prefix
gets defined anyways for us human beings it's quite an annoying
requirement especially given most of time the same one prefix
"arc-linux-" is all what we need.
It looks like finally we're getting the best of both worlds:
1. W/o cross-toolchain we still may install headers, build .dtb etc
2. W/ cross-toolchain get the kerne built with only ARCH=arc
Inspired by [1] & [2].
[1] http://lists.infradead.org/pipermail/linux-snps-arc/2019-May/005788.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fc2b47b55f17
A side note: even though "cc-cross-prefix" does its job it pollutes
console with output of "which" for all the prefixes it didn't manage to find
a matching cross-compiler for like that:
| # ARCH=arc make defconfig
| which: no arceb-linux-gcc in (~/.local/bin:~/bin:/usr/bin:/usr/sbin)
| *** Default configuration is based on 'nsim_hs_defconfig'
Suggested-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Minor RISC-V fixes and one defconfig update.
The fixes have no functional impact:
- Fix some comment text in the memory management vmalloc_fault path.
- Fix some warnings from the DT compiler in our newly-added DT files.
- Change the newly-added DT bindings such that SoC IP blocks with
external I/O are marked as "disabled" by default, then enable them
explicitly in board DT files when the devices are used on the
board. This aligns the bindings with existing upstream practice.
- Add the MIT license as an option for a minor header file, at the
request of one of the U-Boot maintainers.
The RISC-V defconfig update builds the SiFive SPI driver and the
MMC-SPI driver by default. The intention here is to make v5.2 more
usable for testers and users with RISC-V hardware"
* tag 'riscv-for-v5.2/fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: mm: Fix code comment
dt-bindings: clock: sifive: add MIT license as an option for the header file
dt-bindings: riscv: resolve 'make dt_binding_check' warnings
riscv: dts: Re-organize the DT nodes
RISC-V: defconfig: enable MMC & SPI for RISC-V
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Fix the comment since vmalloc_fault doesn't reach
flush_tlb_fix_spurious_fault.
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
As per the convention for any SOC device with external connection,
define only device DT node in SOC DTSi file with status = "disabled"
and enable device in Board DTS file with status = "okay"
Reported-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Currently, riscv upstream defconfig doesn't let you boot
through userspace if rootfs is on the SD card.
Let's enable MMC & SPI drivers as well so that one can boot
to the user space using default config in upstream kernel.
While here, enable automatic mounting of devtmpfs to simplify
kernel testing with minimal root filesystems. (pjw)
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: mention the DEVTMPFS_MOUNT change in the
patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
| | |\ \ \ \ \ \ \
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A smaller batch of fixes, nothing that stands out as risky or scary.
Mostly DTS tweaks for a few issues:
- GPU fixlets for Meson
- CPU idle fix for LS1028A
- PWM interrupt fixes for i.MX6UL
Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
two MAINTAINER tweaks"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: imx6ul: fix PWM[1-4] interrupts
ARM: omap2: remove incorrect __init annotation
ARM: dts: gemini Fix up DNS-313 compatible string
ARM: dts: Blank D-Link DIR-685 console
arm64: defconfig: Enable FSL_EDMA driver
arm64: dts: ls1028a: Fix CPU idle fail.
MAINTAINERS: BCM53573: Add internal Broadcom mailing list
MAINTAINERS: BCM2835: Add internal Broadcom mailing list
ARM: dts: meson8b: fix the operating voltage of the Mali GPU
ARM: dts: meson8b: drop undocumented property from the Mali GPU node
ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
|
| | |\ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://github.com/c-sky/csky-linux
Pull arch/csky fixup from Guo Ren:
"A fixup patch for rt_sigframe in signal.c"
* tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux:
csky: Fixup libgcc unwind error
|
| | | | |_|_|_|/ / /
| | |/| | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
The struct rt_sigframe is also defined in libgcc/config/csky/linux-unwind.h
of gcc. Although there is no use for the first three word space, we must
keep them the same with linux-unwind.h for member position.
The BUG is found in glibc test with the tst-cancel02.
The BUG is from commit:bf2416829362 of linux-5.2-rc1 merge window.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
| | |\ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Add missing PCREL64 relocation in module loader to fix module load
errors when the static branch and JUMP_LABEL feature is enabled on
a 64-bit kernel"
* 'parisc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix module loading error with JUMP_LABEL feature
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Commit 62217beb394e ("parisc: Add static branch and JUMP_LABEL feature") missed
to add code to handle PCREL64 relocations which are generated when creating a
jump label on a 64-bit kernel.
This patch fixes module load errors like this one:
# modprobe -v ipv6
insmod /lib/modules/5.2.0-rc1-JeR/kernel/net/ipv6/ipv6.ko
modprobe: ERROR: could not insert 'ipv6': Exec format error
dmesg reports:
module ipv6: Unknown relocation: 72
Reported-by: Jeroen Roovers <jer@gentoo.org>
Tested-by: Jeroen Roovers <jer@gentoo.org>
Fixes: 62217beb394e ("parisc: Add static branch and JUMP_LABEL feature")
Signed-off-by: Helge Deller <deller@gmx.de>
|
| | |\ \ \ \ \ \ \ \ \
| | |_|_|_|/ / / / /
| |/| | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a bug in our context id handling on 64-bit hash CPUs,
which can lead to unrelated processes being able to read/write to each
other's virtual memory. See the commit for full details.
That is the fix for CVE-2019-12817.
This also adds a kernel selftest for the bug"
* tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add test of fork with mapping above 512TB
powerpc/mm/64s/hash: Reallocate context ids on fork
|
| | | |\ \ \ \ \ \ \ \
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
This merges a fix for a bug in our context id handling on 64-bit hash
CPUs.
The fix was written against v5.1 to ease backporting to stable
releases. Here we are merging it up to a v5.2-rc2 base, which involves
a bit of manual resolution.
It also adds a test case for the bug.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
When using the Hash Page Table (HPT) MMU, userspace memory mappings
are managed at two levels. Firstly in the Linux page tables, much like
other architectures, and secondly in the SLB (Segment Lookaside
Buffer) and HPT. It's the SLB and HPT that are actually used by the
hardware to do translations.
As part of the series adding support for 4PB user virtual address
space using the hash MMU, we added support for allocating multiple
"context ids" per process, one for each 512TB chunk of address space.
These are tracked in an array called extended_id in the mm_context_t
of a process that has done a mapping above 512TB.
If such a process forks (ie. clone(2) without CLONE_VM set) it's mm is
copied, including the mm_context_t, and then init_new_context() is
called to reinitialise parts of the mm_context_t as appropriate to
separate the address spaces of the two processes.
The key step in ensuring the two processes have separate address
spaces is to allocate a new context id for the process, this is done
at the beginning of hash__init_new_context(). If we didn't allocate a
new context id then the two processes would share mappings as far as
the SLB and HPT are concerned, even though their Linux page tables
would be separate.
For mappings above 512TB, which use the extended_id array, we
neglected to allocate new context ids on fork, meaning the parent and
child use the same ids and therefore share those mappings even though
they're supposed to be separate. This can lead to the parent seeing
writes done by the child, which is essentially memory corruption.
There is an additional exposure which is that if the child process
exits, all its context ids are freed, including the context ids that
are still in use by the parent for mappings above 512TB. One or more
of those ids can then be reallocated to a third process, that process
can then read/write to the parent's mappings above 512TB. Additionally
if the freed id is used for the third process's primary context id,
then the parent is able to read/write to the third process's mappings
*below* 512TB.
All of these are fundamental failures to enforce separation between
processes. The only mitigating factor is that the bug only occurs if a
process creates mappings above 512TB, and most applications still do
not create such mappings.
Only machines using the hash page table MMU are affected, eg. PowerPC
970 (G5), PA6T, Power5/6/7/8/9. By default Power9 bare metal machines
(powernv) use the Radix MMU and are not affected, unless the machine
has been explicitly booted in HPT mode (using disable_radix on the
kernel command line). KVM guests on Power9 may be affected if the host
or guest is configured to use the HPT MMU. LPARs under PowerVM on
Power9 are affected as they always use the HPT MMU. Kernels built with
PAGE_SIZE=4K are not affected.
The fix is relatively simple, we need to reallocate context ids for
all extended mappings on fork.
Fixes: f384796c40dc ("powerpc/mm: Add support for handling > 512TB address in SLB miss")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | |\ \ \ \ \ \ \ \ \ \
| | | |_|_|_|_|_|_|_|/
| | |/| | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a frustratingly large batch at rc5. Some of these were sent
earlier but were missed by me due to being distracted by other things,
and some took a while to track down due to needing manual bisection on
old hardware. But still we clearly need to improve our testing of KVM,
and of 32-bit, so that we catch these earlier.
Summary: seven fixes, all for bugs introduced this cycle.
- The commit to add KASAN support broke booting on 32-bit SMP
machines, due to a refactoring that moved some setup out of the
secondary CPU path.
- A fix for another 32-bit SMP bug introduced by the fast syscall
entry implementation for 32-bit BOOKE. And a build fix for the same
commit.
- Our change to allow the DAWR to be force enabled on Power9
introduced a bug in KVM, where we clobber r3 leading to a host
crash.
- The same commit also exposed a previously unreachable bug in the
nested KVM handling of DAWR, which could lead to an oops in a
nested host.
- One of the DMA reworks broke the b43legacy WiFi driver on some
people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.
- A fix for TLB flushing in KVM introduced a new bug, as it neglected
to also flush the ERAT, this could lead to memory corruption in the
guest.
Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
Finger, Michael Neuling, Suraj Jitindar Singh"
* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
powerpc/32: fix build failure on book3e with KVM
powerpc/booke: fix fast syscall entry on SMP
powerpc/32s: fix initial setup of segment registers on secondary CPU
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
When a guest vcpu moves from one physical thread to another it is
necessary for the host to perform a tlb flush on the previous core if
another vcpu from the same guest is going to run there. This is because the
guest may use the local form of the tlb invalidation instruction meaning
stale tlb entries would persist where it previously ran. This is handled
on guest entry in kvmppc_check_need_tlb_flush() which calls
flush_guest_tlb() to perform the tlb flush.
Previously the generic radix__local_flush_tlb_lpid_guest() function was
used, however the functionality was reimplemented in flush_guest_tlb()
to avoid the trace_tlbie() call as the flushing may be done in real
mode. The reimplementation in flush_guest_tlb() was missing an erat
invalidation after flushing the tlb.
This lead to observable memory corruption in the guest due to the
caching of stale translations. Fix this by adding the erat invalidation.
Fixes: 70ea13f6e609 ("KVM: PPC: Book3S HV: Flush TLB on secondary radix threads")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
With the strict dma mask checking introduced with the switch to
the generic DMA direct code common wifi chips on 32-bit powerbooks
stopped working. Add a 30-bit ZONE_DMA to the 32-bit pmac builds
to allow them to reliably allocate dma coherent memory.
Fixes: 65a21b71f948 ("powerpc/dma: remove dma_nommu_dma_supported")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
The hcall H_SET_DAWR is used by a guest to set the data address
watchpoint register (DAWR). This hcall is handled in the host in
kvmppc_h_set_dawr() which can be called in either real mode on the
guest exit path from hcall_try_real_mode() in book3s_hv_rmhandlers.S,
or in virtual mode when called from kvmppc_pseries_do_hcall() in
book3s_hv.c.
The function kvmppc_h_set_dawr() updates the dawr and dawrx fields in
the vcpu struct accordingly and then also writes the respective values
into the DAWR and DAWRX registers directly. It is necessary to write
the registers directly here when calling the function in real mode
since the path to re-enter the guest won't do this. However when in
virtual mode the host DAWR and DAWRX values have already been
restored, and so writing the registers would overwrite these.
Additionally there is no reason to write the guest values here as
these will be read from the vcpu struct and written to the registers
appropriately the next time the vcpu is run.
This also avoids the case when handling h_set_dawr for a nested guest
where the guest hypervisor isn't able to write the DAWR and DAWRX
registers directly and must rely on the real hypervisor to do this for
it when it calls H_ENTER_NESTED.
Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
screwed up some assembler and corrupted a pointer in r3. This resulted
in crashes like the below:
BUG: Kernel NULL pointer dereference at 0x000013bf
Faulting instruction address: 0xc00000000010b044
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 8 PID: 1771 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc4+ #3
NIP: c00000000010b044 LR: c0080000089dacf4 CTR: c00000000010aff4
REGS: c00000179b397710 TRAP: 0300 Not tainted (5.2.0-rc4+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 42244842 XER: 00000000
CFAR: c00000000010aff8 DAR: 00000000000013bf DSISR: 42000000 IRQMASK: 0
GPR00: c0080000089dd6bc c00000179b3979a0 c008000008a04300 ffffffffffffffff
GPR04: 0000000000000000 0000000000000003 000000002444b05d c0000017f11c45d0
...
NIP kvmppc_h_set_dabr+0x50/0x68
LR kvmppc_pseries_do_hcall+0xa3c/0xeb0 [kvm_hv]
Call Trace:
0xc0000017f11c0000 (unreliable)
kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv]
kvmppc_vcpu_run+0x34/0x48 [kvm]
kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm]
kvm_vcpu_ioctl+0x460/0x850 [kvm]
do_vfs_ioctl+0xe4/0xb40
ksys_ioctl+0xc4/0x110
sys_ioctl+0x28/0x80
system_call+0x5c/0x70
Instruction dump:
4082fff4 4c00012c 38600000 4e800020 e96280c0 896b0000 2c2b0000 3860ffff
4d820020 50852e74 508516f6 78840724 <f88313c0> f8a313c8 7c942ba6 7cbc2ba6
Fix the bug by only changing r3 when we are returning immediately.
Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Build failure was introduced by the commit identified below,
due to missed macro expension leading to wrong called function's name.
arch/powerpc/kernel/head_fsl_booke.o: In function `SystemCall':
arch/powerpc/kernel/head_fsl_booke.S:416: undefined reference to `kvmppc_handler_BOOKE_INTERRUPT_SYSCALL_SPRN_SRR1'
Makefile:1052: recipe for target 'vmlinux' failed
The called function should be kvmppc_handler_8_0x01B(). This patch fixes it.
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Fixes: 1a4b739bbb4f ("powerpc/32: implement fast entry for syscalls on BOOKE")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Use r10 instead of r9 to calculate CPU offset as r9 contains
the value from SRR1 which is used later.
Fixes: 1a4b739bbb4f ("powerpc/32: implement fast entry for syscalls on BOOKE")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | |/ / / / / / / /
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
The patch referenced below moved the loading of segment registers
out of load_up_mmu() in order to do it earlier in the boot sequence.
However, the secondary CPU still needs it to be done when loading up
the MMU.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Fixes: 215b823707ce ("powerpc/32s: set up an early static hash table for KASAN")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks. This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read. This will segfault on bare metal.
This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code. There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.
On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.
Cc: stable@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| | |\ \ \ \ \ \ \ \ \
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Pull ARM fix from Russell King:
"Just one ARM fix this time around for Jason Donenfeld, fixing a
problem with the VDSO generation on big endian"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8867/1: vdso: pass --be8 to linker if necessary
|
