| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
kernel_wait4() expects a userland address for status - it's only
rusage that goes as a kernel one (and needs a copyout afterwards)
[ Also, fix the prototype of kernel_wait4() to have that __user
annotation - Linus ]
Fixes: 92ebce5ac55d ("osf_wait4: switch to kernel_wait4()")
Cc: stable@kernel.org # v4.13+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- Fix interrupt type on ethernet switch for i.MX-based RDU2
- GPC on i.MX exposed too large a register window which resulted in
userspace being able to crash the machine.
- Fixup of bad merge resolution moving GPIO DT nodes under pinctrl on
droid4.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch
soc: imx: gpc: restrict register range for regmap access
ARM: dts: omap4-droid4: fix dts w.r.t. pwm
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.18, round 4:
- A fix for i.MX6 RDU2 board on the wrong IRQ type of Marvell switch,
which might result in a race condition in the interrupt handler and
cause the OS to miss all future events.
* tag 'imx-fixes-4.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The Marvell switches report their interrupts in a level sensitive way.
When using edge sensitive detection a race condition in the interrupt
handler of the swich might result in the OS to miss all future events
which might make the switch non-functional.
The problem is that both mv88e6xxx_g2_irq_thread_fn() and
mv88e6xxx_g1_irq_thread_work() sample the irq cause register
(MV88E6XXX_G2_INT_SRC and MV88E6XXX_G1_STS respectively) once and then
handle the observed sources. If after sampling but before all observed
irq sources are handled a new irq source gets active this is not noticed
by the handler which returns unsuspecting, but the interrupt line stays
active which prevents the edge detector to kick in.
All device trees but imx6qdl-zii-rdu2 get this right (most of them by
not specifying an interrupt parent). So fix imx6qdl-zii-rdu2
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: f64992d1a916 ("ARM: dts: imx6: RDU2: Add Switch interrupts")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
One omap dts mismerge fix
The dts patch for droid4 PWM vibrator has added gpio6 entries to the wrong
node. Let's fix it with a note that there seems to be also other GPIO PWM
issues to fix still to get the PWM vibrator working. So this can wait for
v4.19 merge cycle if necessary.
* tag 'omap-for-v4.18/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: fix dts w.r.t. pwm
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
pwm node should not be under gpio6 node in the device tree.
This fixes detection of the pwm on Droid 4.
Fixes: 6d7bdd328da4 ("ARM: dts: omap4-droid4: update touchscreen")
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
[tony@atomide.com: added fixes tag]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A single fix for a MCE-polling regression, which prevented the
disabling of polling"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE: Remove min interval polling limitation
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
commit b3b7c4795c ("x86/MCE: Serialize sysfs changes") introduced a min
interval limitation when setting the check interval for polled MCEs.
However, the logic is that 0 disables polling for corrected MCEs, see
Documentation/x86/x86_64/machinecheck. The limitation prevents disabling.
Remove this limitation and allow the value 0 to disable polling again.
Fixes: b3b7c4795c ("x86/MCE: Serialize sysfs changes")
Signed-off-by: Dewet Thibaut <thibaut.dewet@nokia.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.com
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti fixes from Ingo Molnar:
"An APM fix, and a BTS hardware-tracing fix related to PTI changes"
* 'x86-pti-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apm: Don't access __preempt_count with zeroed fs
x86/events/intel/ds: Fix bts_interrupt_threshold alignment
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
APM_DO_POP_SEGS does not restore fs/gs which were zeroed by
APM_DO_ZERO_SEGS. Trying to access __preempt_count with
zeroed fs doesn't really work.
Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS
invocations so that fs is actually restored before calling
preempt_enable().
Fixes the following sort of oopses:
[ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP
[ 0.313803] Modules linked in:
[ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19
[ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170
[ 0.316161] EFLAGS: 00210016 CPU: 0
[ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000
[ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0
[ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0
[ 0.316161] Call Trace:
[ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20
[ 0.316161] on_cpu0+0x44/0x70
[ 0.316161] apm+0x54e/0x720
[ 0.316161] ? __switch_to_asm+0x26/0x40
[ 0.316161] ? __schedule+0x17d/0x590
[ 0.316161] kthread+0xc0/0xf0
[ 0.316161] ? proc_apm_show+0x150/0x150
[ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20
[ 0.316161] ret_from_fork+0x2e/0x38
[ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45
[ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0
[ 0.316161] ---[ end trace 656253db2deaa12c ]---
Fixes: dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Markus reported that BTS is sporadically missing the tail of the trace
in the perf_event data buffer: [decode error (1): instruction overflow]
shown in GDB; and bisected it to the conversion of debug_store to PTI.
A little "optimization" crept into alloc_bts_buffer(), which mistakenly
placed bts_interrupt_threshold away from the 24-byte record boundary.
Intel SDM Vol 3B 17.4.9 says "This address must point to an offset from
the BTS buffer base that is a multiple of the BTS record size."
Revert "max" from a byte count to a record count, to calculate the
bts_interrupt_threshold correctly: which turns out to fix problem seen.
Fixes: c1961a4631da ("x86/events/intel/ds: Map debug buffers in cpu_entry_area")
Reported-and-tested-by: Markus T Metzger <markus.t.metzger@intel.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v4.14+
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.1807141248290.1614@eggly.anvils
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core kernel fixes from Ingo Molnar:
"This is mostly the copy_to_user_mcsafe() related fixes from Dan
Williams, and an ORC fix for Clang"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handling
lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe()
lib/iov_iter: Document _copy_to_iter_flushcache()
lib/iov_iter: Document _copy_to_iter_mcsafe()
objtool: Use '.strtab' if '.shstrtab' doesn't exist, to support ORC tables on Clang
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
All copy_to_user() implementations need to be prepared to handle faults
accessing userspace. The __memcpy_mcsafe() implementation handles both
mmu-faults on the user destination and machine-check-exceptions on the
source buffer. However, the memcpy_mcsafe() wrapper may silently
fallback to memcpy() depending on build options and cpu-capabilities.
Force copy_to_user_mcsafe() to always use __memcpy_mcsafe() when
available, and otherwise disable all of the copy_to_user_mcsafe()
infrastructure when __memcpy_mcsafe() is not available, i.e.
CONFIG_X86_MCE=n.
This fixes crashes of the form:
run fstests generic/323 at 2018-07-02 12:46:23
BUG: unable to handle kernel paging request at 00007f0d50001000
RIP: 0010:__memcpy+0x12/0x20
[..]
Call Trace:
copyout_mcsafe+0x3a/0x50
_copy_to_iter_mcsafe+0xa1/0x4a0
? dax_alive+0x30/0x50
dax_iomap_actor+0x1f9/0x280
? dax_iomap_rw+0x100/0x100
iomap_apply+0xba/0x130
? dax_iomap_rw+0x100/0x100
dax_iomap_rw+0x95/0x100
? dax_iomap_rw+0x100/0x100
xfs_file_dax_read+0x7b/0x1d0 [xfs]
xfs_file_read_iter+0xa7/0xc0 [xfs]
aio_read+0x11c/0x1a0
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()")
Link: http://lkml.kernel.org/r/153108277790.37979.1486841789275803399.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
| |\ \ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two regression fixes, one for xmon disassembly formatting and the
other to fix the E500 build.
Two commits to fix a potential security issue in the VFIO code under
obscure circumstances.
And finally a fix to the Power9 idle code to restore SPRG3, which is
user visible and used for sched_getcpu().
Thanks to: Alexey Kardashevskiy, David Gibson. Gautham R. Shenoy,
James Clarke"
* tag 'powerpc-4.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle)
powerpc/Makefile: Assemble with -me500 when building for E500
KVM: PPC: Check if IOMMU page is contained in the pinned physical page
vfio/spapr: Use IOMMU pageshift rather than pagesize
powerpc/xmon: Fix disassembly since printf changes
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
On 64-bit servers, SPRN_SPRG3 and its userspace read-only mirror
SPRN_USPRG3 are used as userspace VDSO write and read registers
respectively.
SPRN_SPRG3 is lost when we enter stop4 and above, and is currently not
restored. As a result, any read from SPRN_USPRG3 returns zero on an
exit from stop4 (Power9 only) and above.
Thus in this situation, on POWER9, any call from sched_getcpu() always
returns zero, as on powerpc, we call __kernel_getcpu() which relies
upon SPRN_USPRG3 to report the CPU and NUMA node information.
Fix this by restoring SPRN_SPRG3 on wake up from a deep stop state
with the sprg_vdso value that is cached in PACA.
Fixes: e1c1cfed5432 ("powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Some of the assembly files use instructions specific to BookE or E500,
which are rejected with the now-default -mcpu=powerpc, so we must pass
-me500 to the assembler just as we pass -me200 for E200.
Fixes: 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile")
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
A VM which has:
- a DMA capable device passed through to it (eg. network card);
- running a malicious kernel that ignores H_PUT_TCE failure;
- capability of using IOMMU pages bigger that physical pages
can create an IOMMU mapping that exposes (for example) 16MB of
the host physical memory to the device when only 64K was allocated to the VM.
The remaining 16MB - 64K will be some other content of host memory, possibly
including pages of the VM, but also pages of host kernel memory, host
programs or other VMs.
The attacking VM does not control the location of the page it can map,
and is only allowed to map as many pages as it has pages of RAM.
We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that
an IOMMU page is contained in the physical page so the PCI hardware won't
get access to unassigned host memory; however this check is missing in
the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and
did not hit this yet as the very first time when the mapping happens
we do not have tbl::it_userspace allocated yet and fall back to
the userspace which in turn calls VFIO IOMMU driver, this fails and
the guest does not retry,
This stores the smallest preregistered page size in the preregistered
region descriptor and changes the mm_iommu_xxx API to check this against
the IOMMU page size.
This calculates maximum page size as a minimum of the natural region
alignment and compound page size. For the page shift this uses the shift
returned by find_linux_pte() which indicates how the page is mapped to
the current userspace - if the page is huge and this is not a zero, then
it is a leaf pte and the page is mapped within the range.
Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The recent change to add printf annotations to xmon inadvertently made
the disassembly output ugly, eg:
c00000002001e058 7ee00026 mfcr r23
c00000002001e05c fffffffffae101a0 std r23,416(r1)
c00000002001e060 fffffffff8230000 std r1,0(r3)
The problem being that negative 32-bit values are being displayed in
full 64-bits.
The printf conversion was actually correct, we are passing unsigned
long so it should use "lx". But powerpc instructions are only 4 bytes
and the code only reads 4 bytes, so inst should really just be
unsigned int, and that also fixes the printing to look the way we
want:
c00000002001e058 7ee00026 mfcr r23
c00000002001e05c fae101a0 std r23,416(r1)
c00000002001e060 f8230000 std r1,0(r3)
Fixes: e70d8f55268b ("powerpc/xmon: Add __printf annotation to xmon_printf()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Like vm_area_dup(), it initializes the anon_vma_chain head, and the
basic mm pointer.
The rest of the fields end up being different for different users,
although the plan is to also initialize the 'vm_ops' field to a dummy
entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The vm_area_struct is one of the most fundamental memory management
objects, but the management of it is entirely open-coded evertwhere,
ranging from allocation and freeing (using kmem_cache_[z]alloc and
kmem_cache_free) to initializing all the fields.
We want to unify this in order to end up having some unified
initialization of the vmas, and the first step to this is to at least
have basic allocation functions.
Right now those functions are literally just wrappers around the
kmem_cache_*() calls. This is a purely mechanical conversion:
# new vma:
kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL) -> vm_area_alloc()
# copy old vma
kmem_cache_alloc(vm_area_cachep, GFP_KERNEL) -> vm_area_dup(old)
# free vma
kmem_cache_free(vm_area_cachep, vma) -> vm_area_free(vma)
to the point where the old vma passed in to the vm_area_dup() function
isn't even used yet (because I've left all the old manual initialization
alone).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |\ \ \ \ \ \ \ \
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"ARC is back after radio silence in 4.17:
- Fix CONFIG_SWAP [Alexey]
- Robustify cmpxchg emulation for systems w/o atomics [Alexey /
PeterZ]
- Allow mprotext(PROT_EXEC) for stack mappings [Vineet]
- HSDK platform enable PCIe, APG GPIO [Gustavo]
- miscll other fixes, config updates etc"
* tag 'arc-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: [plat-hsdk]: Save accl reg pair by default
ARC: mm: allow mprotect to make stack mappings executable
ARC: Fix CONFIG_SWAP
ARC: [arcompact] entry.S: minor code movement
ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs
ARC: configs: remove no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCES
ARC: Improve cmpxchg syscall implementation
ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform
ARC: [plat-hsdk] Add PCIe support
ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP
ARC: Explicitly add -mmedium-calls to CFLAGS
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
This manifsted as strace segfaulting on HSDK because gcc was targetting
the accumulator registers as GPRs, which kernek was not saving/restoring
by default.
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
mprotect(EXEC) was failing for stack mappings as default vm flags was
missing MAYEXEC.
This was triggered by glibc test suite nptl/tst-execstack testcase
What is surprising is that despite running LTP for years on, we didn't
catch this issue as it lacks a directed test case.
gcc dejagnu tests with nested functions also requiring exec stack work
fine though because they rely on the GNU_STACK segment spit out by
compiler and handled in kernel elf loader.
This glibc case is different as the stack is non exec to begin with and
a dlopen of shared lib with GNU_STACK segment triggers the exec stack
proceedings using a mprotect(PROT_EXEC) which was broken.
CC: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
swap was broken on ARC due to silly copy-paste issue.
We encode offset from swapcache page in __swp_entry() as (off << 13) but
were not decoding back in __swp_offset() as (off >> 13) - it was still
(off << 13).
This finally fixes swap usage on ARC.
| # mkswap /dev/sda2
|
| # swapon -a -e /dev/sda2
| Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k
|
| # free
| total used free shared buffers cached
| Mem: 765104 13456 751648 4736 8 4736
| -/+ buffers/cache: 8712 756392
| Swap: 500728 0 500728
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
This is a non functional code changw, which moves r25 restore from macro
into the caller of macro
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path
to intramfs in ARC defconfigs. This was quite convenient for
in-house development but not that convenient for newcomers
who obviusly don't have folders like "arc_initramfs" next to
the Linux source tree. Which leads to quite surprising failure
of defconfig building:
------------------------------->8-----------------------------
../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/'
../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
------------------------------->8-----------------------------
So now when more and more people start to deal with our defconfigs
let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Since commit eedf265aa003 ("devpts: Make each mount of devpts an
independent filesystem.") CONFIG_DEVPTS_MULTIPLE_INSTANCES isn't needed
in the defconfig anymore.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
This is used in configs lacking hardware atomics to emulate atomic r-m-w
for user space, implemented by disabling preemption in kernel.
However there are issues in current implementation:
1. Process not terminated if invalid user pointer passed:
i.e. __get_user() failed.
2. The reason for this patch was __put_user() failure not being handled
either, specifically for the COW break scenario.
The zero page is initially wired up and read from __get_user()
succeeds. A subsequent write by __put_user() induces a
Protection Violation, but COW can't finish as Linux page fault
handler is disabled due to preempt disable.
And what's worse is we silently return the stale value to user space.
Fix this specific case by re-enabling preemption and explicitly
fixing up the fault and retrying the whole sequence over.
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote the changelog]
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
In case of HSDK we have intermediate INTC in for of DW APB GPIO controller
which is used as a de-bounce logic for interrupt wires that come from
outside the board.
We cannot use existing "irq-dw-apb-ictl" driver here because all input
lines are routed to corresponding output lines but not muxed into one
line (this is configured in RTL and we cannot change this in software).
But even if we add such a feature to "irq-dw-apb-ictl" driver that won't
benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has
per-input control so adding fully-controller intermediate INTC will only
bring some overhead on interrupt processing but no other benefits.
Thus we just do one-time configuration of DW APB GPIO controller and
forget about it.
Based on implementation available on arch/arc/plat-axs10x/axs10x.c file.
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Add PCI support to the ARC HSDK platform allowing to use the generic PCI
setup functions.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
machine_desc->init_per_cpu() hook is supposed to be per cpu
initialization and would seem to apply equally to UP and/or SMP.
Infact the comment in header file seems to suggest it works for
UP too, which was not the case and this patch.
This enables !CONFIG_SMP build for platforms such as hsdk.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: trimmeed changelog]
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default
thus we don't see any problems during Linux kernel compilation.
----------------------------->8------------------------
arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls
-mlong-calls [disabled]
-mmedium-calls [enabled]
----------------------------->8------------------------
But if we try to use so-called Elf32 toolchain with GCC configured for
arc*-*-elf* then we'd see the following failure:
----------------------------->8------------------------
init/do_mounts.o: In function 'init_rootfs':
do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL
against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o
arc-elf32-ld: final link failed: Symbol needs debug section which does not exist
make: *** [vmlinux] Error 1
----------------------------->8------------------------
That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in
Elf32 GCC:
----------------------------->8------------------------
arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls
-mlong-calls [disabled]
-mmedium-calls [disabled]
----------------------------->8------------------------
Now to make it possible to use Elf32 toolchain for building Linux kernel
we're explicitly add "-mmedium-calls" to CFLAGS.
And since we add "-mmedium-calls" to the global CFLAGS there's no point in
having per-file copies thus removing them.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
| |\ \ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
"Bug fixes and build ixes for nds32"
* tag 'nds32-for-linus-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" when make allyesconfig
nds32: To simplify the implementation of update_mmu_cache()
nds32: Fix the dts pointer is not passed correctly issue.
nds32: To implement these icache invalidation APIs since nds32 cores don't snoop data cache. This issue is found by Guo Ren. Based on the Documentation/core-api/cachetlb.rst and it says:
nds32: Fix build error caused by configuration flag rename
nds32: define __NDS32_E[BL]__ for sparse
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
make allyesconfig
It will cause a linking error because the jump assembly code were using j,
however it may be not enough to jump to the destination. We have to change it
with pseudo instruction b. In that way, assembler will generate a set of safe
assembly codes to make sure the destination is able to jump.
Toolchain:
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-nds32le-linux.tar.gz
Command:
PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make allyesconfig
PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make -j8
MODPOST vmlinux.o
WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned.
nds32le-linux-ld: kernel/futex.o:(.fixup+0x4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text'
nds32le-linux-ld: kernel/futex.o:(.fixup+0xaa): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text'
nds32le-linux-ld: kernel/futex.o:(.fixup+0xb0): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text'
nds32le-linux-ld: kernel/futex.o:(.fixup+0xb6): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text'
nds32le-linux-ld: kernel/futex.o:(.fixup+0xbc): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text'
nds32le-linux-ld: kernel/futex.o:(.fixup+0xc4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text'
Makefile:1010: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
Signed-off-by: Greentime Hu <greentime@andestech.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
The checking code is done in kmap_atomic() so that we don't need to
check it in update_mmu_cache() again. There is no need to implement
it for cache aliasing or cache non-aliasing versions. We can just
implement one version for both.
Signed-off-by: Greentime Hu <greentime@andestech.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
We found that the original implementation will only use the built-in dtb
pointer instead of the pointer pass from bootloader. This bug is fixed
by this patch.
Signed-off-by: Greentime Hu <greentime@andestech.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
data cache.
This issue is found by Guo Ren. Based on the Documentation/core-api/cachetlb.rst
and it says:
"Any necessary cache flushing or other coherency operations
that need to occur should happen here. If the processor's
instruction cache does not snoop cpu stores, it is very
likely that you will need to flush the instruction cache
for copy_to_user_page()."
"If the icache does not snoop stores then this
routine(flush_icache_range) will need to flush it."
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Fix build error on nds32 due to the merge of commit e3d5980568f ("lib:
Rename compiler intrinsic selects to GENERIC_LIB_*") during the 4.18
merge window which renames Kconfig symbols. This had raced with commit
aeaa7af744fa ("nds32: lib: To use generic lib instead of libgcc to
prevent the symbol undefined issue.") merged late in the 4.17 cycle,
which added selects to nds32 using the original Kconfig symbol names.
When they came together in merge commit 763f96944c95 ("Merge tag
'mips_4.18' of
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux") this resulted
in the following build errors:
nds32le-linux-ld: kernel/time/timekeeping.o: in function `timekeeping_init':
timekeeping.c:(.init.text+0x140): undefined reference to `__ashldi3'
nds32le-linux-ld: timekeeping.c:(.init.text+0x144): undefined reference to `__ashldi3'
nds32le-linux-ld: timekeeping.c:(.init.text+0x17e): undefined reference to `__lshrdi3'
nds32le-linux-ld: timekeeping.c:(.init.text+0x182): undefined reference to `__lshrdi3'
nds32le-linux-ld: drivers/clocksource/mmio.o: in function `clocksource_mmio_init':
mmio.c:(.init.text+0x54): undefined reference to `__lshrdi3'
nds32le-linux-ld: mmio.c:(.init.text+0x58): undefined reference to `__lshrdi3'
Rename all 6 selects in nds32 and adjust the ordering accordingly to be
alphabetical.
Fixes: 763f96944c95 ("Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[jhogan@kernel.org: Rename all 6 symbols, sort, update commit message]
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
nds32 depends on the macros '__NDS32_E[BL]__' to correctly
select or define endian-specific macros, structures or pieces
of code.
These macros are predefined by the compiler but sparse knows nothing
about them and thus may pre-process files differently from what
GCC would.
Fix this by adding '-D__NDS32_E[BL]__' to CHECKFLAGS.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
|
| |\ \ \ \ \ \ \ \ \ \
| |_|_|_|_|_|/ / / /
|/| | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes, plus a small patchlet related to Spectre v2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvmclock: fix TSC calibration for nested guests
KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled
KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
x86/kvmclock: set pvti_cpu0_va after enabling kvmclock
x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD
kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading
x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks
KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Inside a nested guest, access to hardware can be slow enough that
tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work
to be called periodically and the nested guest to spend a lot of time
reading the ACPI timer.
However, if the TSC frequency is available from the pvclock page,
we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration.
'refine' operation.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[Commit message rewritten. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
When eVMCS is enabled, all VMCS allocated to be used by KVM are marked
with revision_id of KVM_EVMCS_VERSION instead of revision_id reported
by MSR_IA32_VMX_BASIC.
However, even though not explictly documented by TLFS, VMXArea passed
as VMXON argument should still be marked with revision_id reported by
physical CPU.
This issue was found by the following setup:
* L0 = KVM which expose eVMCS to it's L1 guest.
* L1 = KVM which consume eVMCS reported by L0.
This setup caused the following to occur:
1) L1 execute hardware_enable().
2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON.
3) L0 intercept L1 VMXON and execute handle_vmon() which notes
vmxarea->revision_id != VMCS12_REVISION and therefore fails with
nested_vmx_failInvalid() which sets RFLAGS.CF.
4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore
hardware_enable() continues as usual.
5) L1 hardware_enable() then calls ept_sync_global() which executes
INVEPT.
6) L0 intercept INVEPT and execute handle_invept() which notes
!vmx->nested.vmxon and thus raise a #UD to L1.
7) Raised #UD caused L1 to panic.
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 773e8a0425c923bc02668a2d6534a5ef5a43cc69
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
pvti_cpu0_va is the address of shared kvmclock data structure.
pvti_cpu0_va is currently kept unset (1) on 32 bit systems, (2) when
kvmclock vsyscall is disabled, and (3) if kvmclock is not stable.
This poses a problem, because kvm_ptp needs pvti_cpu0_va, but (1) can
work on 32 bit, (2) has little relation to the vsyscall, and (3) does
not need stable kvmclock (although kvmclock won't be used for system
clock if it's not stable, so kvm_ptp is pointless in that case).
Expose pvti_cpu0_va whenever kvmclock is enabled to allow all users to
work with it.
This fixes a regression found on Gentoo: https://bugs.gentoo.org/658544.
Fixes: 9f08890ab906 ("x86/pvclock: add setter for pvclock_pvti_cpu0_va")
Cc: stable@vger.kernel.org
Reported-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Prevent a config where KVM_AMD=y and CRYPTO_DEV_CCP_DD=m thereby ensuring
that AMD Secure Processor device driver will be built-in when KVM_AMD is
also built-in.
v1->v2:
* Removed usage of 'imply' Kconfig option.
* Change patch commit message.
Fixes: 505c9e94d832 ("KVM: x86: prefer "depends on" to "select" for SEV")
Cc: <stable@vger.kernel.org> # 4.16.x
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This exit qualification was inadvertently dropped when the two
VM-entry failure blocks were coalesced.
Fixes: e79f245ddec1 ("X86/KVM: Properly update 'tsc_offset' to represent the running guest")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
When we switched from doing rdmsr() to reading FS/GS base values from
current->thread we completely forgot about legacy 32-bit userspaces which
we still support in KVM (why?). task->thread.{fsbase,gsbase} are only
synced for 64-bit processes, calling save_fsgs_for_kvm() and using
its result from current is illegal for legacy processes.
There's no ARCH_SET_FS/GS prctls for legacy applications. Base MSRs are,
however, not always equal to zero. Intel's manual says (3.4.4 Segment
Loading Instructions in IA-32e Mode):
"In order to set up compatibility mode for an application, segment-load
instructions (MOV to Sreg, POP Sreg) work normally in 64-bit mode. An
entry is read from the system descriptor table (GDT or LDT) and is loaded
in the hidden portion of the segment register.
...
The hidden descriptor register fields for FS.base and GS.base are
physically mapped to MSRs in order to load all address bits supported by
a 64-bit implementation.
"
The issue was found by strace test suite where 32-bit ioctl_kvm_run test
started segfaulting.
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Bisected-by: Masatake YAMATO <yamato@redhat.com>
Fixes: 42b933b59721 ("x86/kvm/vmx: read MSR_{FS,KERNEL_GS}_BASE from current->thread")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This lets userspace read the MSR_IA32_ARCH_CAPABILITIES and check that all
requested features are available on the host.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
| |\ \ \ \ \ \ \ \ \ \
| |_|_|_|_|_|/ / / /
|/| | | | | | / / /
| | |_|_|_|_|/ / /
| |/| | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- A fix for OMAP5 and DRA7 to make the branch predictor hardening
settings take proper effect on secondary cores
- Disable USB OTG on am3517 since current driver isn't working
- Fix thermal sensor register settings on Armada 38x
- Fix suspend/resume IRQs on pxa3xx
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller
ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
ARM: dts: armada-38x: use the new thermal binding
|
| | |\ \ \ \ \ \ \ \
| | | |_|_|_|_|/ /
| | |/| | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Two omap fixes for v4.18-rc cycle
Turns out the recent patches for ARM branch predictor hardening are
not working on omap5 and dra7 as planned because the secondary CPU
is parked to the bootrom code. We can't configure it in the bootloader.
So we must enable invalidates of BTB for omap5 and dra7 secondary
core in the kernel.
And there's a fix for reserved register access for am3517. The
usb otg module on am3517 is not the same as for other omap3.
* tag 'omap-for-v4.18/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller
ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
The AM3517 has a different OTG controller location than the OMAP3,
which is included from omap3.dtsi. This results in a hwmod error.
Since the AM3517 has a different OTG controller address, this patch
disabes one that is isn't available.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
