summaryrefslogtreecommitdiffstats
path: root/block/bfq-iosched.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* bdi: use bdi_dev_name() to get device nameYufen Yu2020-05-101-2/+4
| | | | | | | | | | | | | | Use the common interface bdi_dev_name() to get device name. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Add missing <linux/backing-dev.h> include BFQ Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroupPaolo Valente2020-03-211-2/+0
| | | | | | | | | | | | | A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The goal of this put is to release a process reference to a bfq_queue. But process-reference releases may trigger also some extra operation, and, to this goal, are handled through bfq_release_process_ref(). So, turn the invocation of bfq_put_queue() into an invocation of bfq_release_process_ref(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: fix use-after-free in bfq_idle_slice_timer_bodyZhiqiang Liu2020-03-211-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is not in bfqd-lock critical section. The bfqq, which is not equal to NULL in bfq_idle_slice_timer, may be freed after passing to bfq_idle_slice_timer_body. So we will access the freed memory. In addition, considering the bfqq may be in race, we should firstly check whether bfqq is in service before doing something on it in bfq_idle_slice_timer_body func. If the bfqq in race is not in service, it means the bfqq has been expired through __bfq_bfqq_expire func, and wait_request flags has been cleared in __bfq_bfqd_reset_in_service func. So we do not need to re-clear the wait_request of bfqq which is not in service. KASAN log is given as follows: [13058.354613] ================================================================== [13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290 [13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767 [13058.354646] [13058.354655] CPU: 96 PID: 19767 Comm: fork13 [13058.354661] Call trace: [13058.354667] dump_backtrace+0x0/0x310 [13058.354672] show_stack+0x28/0x38 [13058.354681] dump_stack+0xd8/0x108 [13058.354687] print_address_description+0x68/0x2d0 [13058.354690] kasan_report+0x124/0x2e0 [13058.354697] __asan_load8+0x88/0xb0 [13058.354702] bfq_idle_slice_timer+0xac/0x290 [13058.354707] __hrtimer_run_queues+0x298/0x8b8 [13058.354710] hrtimer_interrupt+0x1b8/0x678 [13058.354716] arch_timer_handler_phys+0x4c/0x78 [13058.354722] handle_percpu_devid_irq+0xf0/0x558 [13058.354731] generic_handle_irq+0x50/0x70 [13058.354735] __handle_domain_irq+0x94/0x110 [13058.354739] gic_handle_irq+0x8c/0x1b0 [13058.354742] el1_irq+0xb8/0x140 [13058.354748] do_wp_page+0x260/0xe28 [13058.354752] __handle_mm_fault+0x8ec/0x9b0 [13058.354756] handle_mm_fault+0x280/0x460 [13058.354762] do_page_fault+0x3ec/0x890 [13058.354765] do_mem_abort+0xc0/0x1b0 [13058.354768] el0_da+0x24/0x28 [13058.354770] [13058.354773] Allocated by task 19731: [13058.354780] kasan_kmalloc+0xe0/0x190 [13058.354784] kasan_slab_alloc+0x14/0x20 [13058.354788] kmem_cache_alloc_node+0x130/0x440 [13058.354793] bfq_get_queue+0x138/0x858 [13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328 [13058.354801] bfq_init_rq+0x1f4/0x1180 [13058.354806] bfq_insert_requests+0x264/0x1c98 [13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488 [13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0 [13058.354826] blk_flush_plug_list+0x230/0x548 [13058.354830] blk_finish_plug+0x60/0x80 [13058.354838] read_pages+0xec/0x2c0 [13058.354842] __do_page_cache_readahead+0x374/0x438 [13058.354846] ondemand_readahead+0x24c/0x6b0 [13058.354851] page_cache_sync_readahead+0x17c/0x2f8 [13058.354858] generic_file_buffered_read+0x588/0xc58 [13058.354862] generic_file_read_iter+0x1b4/0x278 [13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4] [13058.354972] __vfs_read+0x238/0x320 [13058.354976] vfs_read+0xbc/0x1c0 [13058.354980] ksys_read+0xdc/0x1b8 [13058.354984] __arm64_sys_read+0x50/0x60 [13058.354990] el0_svc_common+0xb4/0x1d8 [13058.354994] el0_svc_handler+0x50/0xa8 [13058.354998] el0_svc+0x8/0xc [13058.354999] [13058.355001] Freed by task 19731: [13058.355007] __kasan_slab_free+0x120/0x228 [13058.355010] kasan_slab_free+0x10/0x18 [13058.355014] kmem_cache_free+0x288/0x3f0 [13058.355018] bfq_put_queue+0x134/0x208 [13058.355022] bfq_exit_icq_bfqq+0x164/0x348 [13058.355026] bfq_exit_icq+0x28/0x40 [13058.355030] ioc_exit_icq+0xa0/0x150 [13058.355035] put_io_context_active+0x250/0x438 [13058.355038] exit_io_context+0xd0/0x138 [13058.355045] do_exit+0x734/0xc58 [13058.355050] do_group_exit+0x78/0x220 [13058.355054] __wake_up_parent+0x0/0x50 [13058.355058] el0_svc_common+0xb4/0x1d8 [13058.355062] el0_svc_handler+0x50/0xa8 [13058.355066] el0_svc+0x8/0xc [13058.355067] [13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464 [13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040) [13058.355077] The buggy address belongs to the page: [13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0 [13058.366175] flags: 0x2ffffe0000008100(slab|head) [13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780 [13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000 [13058.370789] page dumped because: kasan: bad access detected [13058.370791] [13058.370792] Memory state around the buggy address: [13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb [13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [13058.370808] ^ [13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [13058.370817] ================================================================== [13058.370820] Disabling lock debugging due to kernel taint Here, we directly pass the bfqd to bfq_idle_slice_timer_body func. -- V2->V3: rewrite the comment as suggested by Paolo Valente V1->V2: add one comment, and add Fixes and Reported-by tag. Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Acked-by: Paolo Valente <paolo.valente@linaro.org> Reported-by: Wang Wang <wangwang2@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: clarify the goal of bfq_split_bfqq()Paolo Valente2020-02-031-0/+2
| | | | | | | | | The exact, general goal of the function bfq_split_bfqq() is not that apparent. Add a comment to make it clear. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: remove ifdefs from around gets/puts of bfq groupsPaolo Valente2020-02-031-5/+1
| | | | | | | | | ifdefs around gets and puts of bfq groups reduce readability, remove them. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: extend incomplete name of field on_stPaolo Valente2020-02-031-1/+1
| | | | | | | | | | | The flag on_st in the bfq_entity data structure is true if the entity is on a service tree or is in service. Yet the name of the field, confusingly, does not mention the second, very important case. Extend the name to mention the second case too. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: do not insert oom queue into position treePaolo Valente2020-02-031-0/+4
| | | | | | | | | | | | | | | | | | | | BFQ maintains an ordered list, implemented with an RB tree, of head-request positions of non-empty bfq_queues. This position tree, inherited from CFQ, is used to find bfq_queues that contain I/O close to each other. BFQ merges these bfq_queues into a single shared queue, if this boosts throughput on the device at hand. There is however a special-purpose bfq_queue that does not participate in queue merging, the oom bfq_queue. Yet, also this bfq_queue could be wrongly added to the position tree. So bfqq_find_close() could return the oom bfq_queue, which is a source of further troubles in an out-of-memory situation. This commit prevents the oom bfq_queue from being inserted into the position tree. Tested-by: Patrick Dung <patdung100@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: do not plug I/O for bfq_queues with no proc refsPaolo Valente2020-02-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | Commit 478de3380c1c ("block, bfq: deschedule empty bfq_queues not referred by any process") fixed commit 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging") by descheduling an empty bfq_queue when it remains with not process reference. Yet, this still left a case uncovered: an empty bfq_queue with not process reference that remains in service. This happens for an in-service sync bfq_queue that is deemed to deserve I/O-dispatch plugging when it remains empty. Yet no new requests will arrive for such a bfq_queue if no process sends requests to it any longer. Even worse, the bfq_queue may happen to be prematurely freed while still in service (because there may remain no reference to it any longer). This commit solves this problem by preventing I/O dispatch from being plugged for the in-service bfq_queue, if the latter has no process reference (the bfq_queue is then prevented from remaining in service). Fixes: 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging") Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Patrick Dung <patdung100@gmail.com> Tested-by: Patrick Dung <patdung100@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block/bfq: remove unused bfq_class_rt which never usedAlex Shi2020-01-221-1/+0
| | | | | | | | | | | | | | This macro is never used after introduced from commit aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Better to remove it. Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Paolo Valente <paolo.valente@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-blockLinus Torvalds2019-11-251-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block updates from Jens Axboe: "Due to more granular branches, this one is small and will be followed with other core branches that add specific features. I meant to just have a core and drivers branch, but external dependencies we ended up adding a few more that are also core. The changes are: - Fixes and improvements for the zoned device support (Ajay, Damien) - sed-opal table writing and datastore UID (Revanth) - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun) - Improvements to the block stats tracking (Pavel) - Fix for overruning sysfs buffer for large number of CPUs (Ming) - Optimization for small IO (Ming, Christoph) - Fix typo in RWH lifetime hint (Eugene) - Dead code removal and documentation (Bart) - Reduction in memory usage for queue and tag set (Bart) - Kerneldoc header documentation (André) - Device/partition revalidation fixes (Jan) - Stats tracking for flush requests (Konstantin) - Various other little fixes here and there (et al)" * tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits) Revert "block: split bio if the only bvec's length is > SZ_4K" block: add iostat counters for flush requests block,bfq: Skip tracing hooks if possible block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64' blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1 block: Don't disable interrupts in trigger_softirq() sbitmap: Delete sbitmap_any_bit_clear() blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue() block: split bio if the only bvec's length is > SZ_4K block: still try to split bio if the bvec crosses pages blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT blk-cgroup: reimplement basic IO stats using cgroup rstat blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive() blk-throtl: stop using blkg->stat_bytes and ->stat_ios bfq-iosched: stop using blkg->stat_bytes and ->stat_ios bfq-iosched: relocate bfqg_*rwstat*() helpers block: add zone open, close and finish ioctl support block: add zone open, close and finish operations block: Simplify REQ_OP_ZONE_RESET_ALL handling block: Remove REQ_OP_ZONE_RESET plugging ...
| * bfq-iosched: stop using blkg->stat_bytes and ->stat_iosTejun Heo2019-11-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When used on cgroup1, bfq uses the blkg->stat_bytes and ->stat_ios from blk-cgroup core to populate six stat knobs. blk-cgroup core is moving away from blkg_rwstat to improve scalability and won't be able to support this usage. It isn't like the sharing gains all that much. Let's break it out to dedicated rwstat counters which are updated when on cgroup1. This makes use of bfqg_*rwstat*() helpers outside of CONFIG_BFQ_CGROUP_DEBUG. Move them out. v2: Compile fix when !CONFIG_BFQ_CGROUP_DEBUG. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: deschedule empty bfq_queues not referred by any processPaolo Valente2019-11-141-6/+26
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging"), to prevent the service guarantees of a bfq_queue from being violated, the bfq_queue may be left busy, i.e., scheduled for service, even if empty (see comments in __bfq_bfqq_expire() for details). But, if no process will send requests to the bfq_queue any longer, then there is no point in keeping the bfq_queue scheduled for service. In addition, keeping the bfq_queue scheduled for service, but with no process reference any longer, may cause the bfq_queue to be freed when descheduled from service. But this is assumed to never happen, and causes a UAF if it happens. This, in turn, caused crashes [1, 2]. This commit fixes this issue by descheduling an empty bfq_queue when it remains with not process reference. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1767539 [2] https://bugzilla.kernel.org/show_bug.cgi?id=205447 Fixes: 3726112ec731 ("block, bfq: re-schedule empty queues if they deserve I/O plugging") Reported-by: Chris Evich <cevich@redhat.com> Reported-by: Patrick Dung <patdung100@gmail.com> Reported-by: Thorsten Schubert <tschubert@bafh.org> Tested-by: Thorsten Schubert <tschubert@bafh.org> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: push up injection only after setting service timePaolo Valente2019-09-181-5/+7
| | | | | | | | | | | | If equal to 0, the injection limit for a bfq_queue is pushed to 1 after a first sample of the total service time of the I/O requests of the queue is computed (to allow injection to start). Yet, because of a mistake in the branch that performs this action, the push may happen also in some other case. This commit fixes this issue. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: increase update frequency of inject limitPaolo Valente2019-09-181-1/+1
| | | | | | | | | | | | The update period of the injection limit has been tentatively set to 100 ms, to reduce fluctuations. This value however proved to cause, occasionally, the limit to be decremented for some bfq_queue only after the queue underwent excessive injection for a lot of time. This commit reduces the period to 10 ms. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1Paolo Valente2019-09-181-1/+1
| | | | | | | | | | | | | | | | | Upon an increment attempt of the injection limit, the latter is constrained not to become higher than twice the maximum number max_rq_in_driver of I/O requests that have happened to be in service in the drive. This high bound allows the injection limit to grow beyond max_rq_in_driver, which may then cause max_rq_in_driver itself to grow. However, since the limit is incremented by only one unit at a time, there is no need for such a high bound, and just max_rq_in_driver+1 is enough. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: update inject limit only after injection occurredPaolo Valente2019-09-181-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | BFQ updates the injection limit of each bfq_queue as a function of how much the limit inflates the service times experienced by the I/O requests of the queue. So only service times affected by injection must be taken into account. Unfortunately, in the current implementation of this update scheme, the service time of an I/O request rq not affected by injection may happen to be considered in the following case: there is no I/O request in service when rq arrives. This commit fixes this issue by making sure that only service times affected by injection are considered for updating the injection limit. In particular, the service time of an I/O request rq is now considered only if at least one of the following two conditions holds: - the destination bfq_queue for rq underwent injection before rq arrival, and there is still I/O in service in the drive on rq arrival (the service of such unfinished I/O may delay the service of rq); - injection occurs between the arrival and the completion time of rq. Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: handle NULL return value by bfq_init_rq()Paolo Valente2019-08-081-3/+11
| | | | | | | | | | | | | | | | | | | As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Hsin-Yi Wang <hsinyi@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: move update of waker and woken list to queue freeingPaolo Valente2019-08-081-15/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), every bfq_queue has a pointer to a waker bfq_queue and a list of the bfq_queues it may wake. In this respect, when a bfq_queue, say Q, remains with no I/O source attached to it, Q cannot be woken by any other bfq_queue, and cannot wake any other bfq_queue. Then Q must be removed from the woken list of its possible waker bfq_queue, and all bfq_queues in the woken list of Q must stop having a waker bfq_queue. Q remains with no I/O source in two cases: when the last process associated with Q exits or when such a process gets associated with a different bfq_queue. Unfortunately, commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") performed the above updates only in the first case. This commit fixes this bug by moving these updates to when Q gets freed. This is a simple and safe way to handle all cases, as both the above events, process exit and re-association, lead to Q being freed soon, and because dangling references would come out only after Q gets freed (if no update were performed). Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: reset last_completed_rq_bfqq if the pointed queue is freedPaolo Valente2019-08-081-3/+7
| | | | | | | | | | | | | | | | | | | Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), BFQ stores, in a per-device pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O request completed. If some bfq_queue receives new I/O right after the last request of last_completed_rq_bfqq has been completed, then last_completed_rq_bfqq may be a waker bfq_queue. But if the bfq_queue last_completed_rq_bfqq points to is freed, then last_completed_rq_bfqq becomes a dangling reference. This commit resets last_completed_rq_bfqq if the pointed bfq_queue is freed. Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-blockLinus Torvalds2019-07-261-24/+43
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: - Several io_uring fixes/improvements: - Blocking fix for O_DIRECT (me) - Latter page slowness for registered buffers (me) - Fix poll hang under certain conditions (me) - Defer sequence check fix for wrapped rings (Zhengyuan) - Mismatch in async inc/dec accounting (Zhengyuan) - Memory ordering issue that could cause stall (Zhengyuan) - Track sequential defer in bytes, not pages (Zhengyuan) - NVMe pull request from Christoph - Set of hang fixes for wbt (Josef) - Redundant error message kill for libahci (Ding) - Remove unused blk_mq_sched_started_request() and related ops (Marcos) - drbd dynamic alloc shash descriptor to reduce stack use (Arnd) - blkcg ->pd_stat() non-debug print (Tejun) - bcache memory leak fix (Wei) - Comment fix (Akinobu) - BFQ perf regression fix (Paolo) * tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits) io_uring: ensure ->list is initialized for poll commands Revert "nvme-pci: don't create a read hctx mapping without read queues" nvme: fix multipath crash when ANA is deactivated nvme: fix memory leak caused by incorrect subsystem free nvme: ignore subnqn for ADATA SX6000LNP drbd: dynamically allocate shash descriptor block: blk-mq: Remove blk_mq_sched_started_request and started_request bcache: fix possible memory leak in bch_cached_dev_run() io_uring: track io length in async_list based on bytes io_uring: don't use iov_iter_advance() for fixed buffers block: properly handle IOCB_NOWAIT for async O_DIRECT IO blk-mq: allow REQ_NOWAIT to return an error inline io_uring: add a memory barrier before atomic_read rq-qos: use a mb for got_token rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule rq-qos: don't reset has_sleepers on spurious wakeups rq-qos: fix missed wake-ups in rq_qos_throttle wait: add wq_has_single_sleeper helper block, bfq: check also in-flight I/O in dispatch plugging block: fix sysfs module parameters directory path in comment ...
| * block, bfq: check also in-flight I/O in dispatch pluggingPaolo Valente2019-07-181-24/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consider a sync bfq_queue Q that remains empty while in service, and suppose that, when this happens, there is a fair amount of already in-flight I/O not belonging to Q. In such a situation, I/O dispatching may need to be plugged (until new I/O arrives for Q), for the following reason. The drive may decide to serve in-flight non-Q's I/O requests before Q's ones, thereby delaying the arrival of new I/O requests for Q (recall that Q is sync). If I/O-dispatching is not plugged, then, while Q remains empty, a basically uncontrolled amount of I/O from other queues may be dispatched too, possibly causing the service of Q's I/O to be delayed even longer in the drive. This problem gets more and more serious as the speed and the queue depth of the drive grow, because, as these two quantities grow, the probability to find no queue busy but many requests in flight grows too. If Q has the same weight and priority as the other queues, then the above delay is unlikely to cause any issue, because all queues tend to undergo the same treatment. So, since not plugging I/O dispatching is convenient for throughput, it is better not to plug. Things change in case Q has a higher weight or priority than some other queue, because Q's service guarantees may simply be violated. For this reason, commit 1de0c4cd9ea6 ("block, bfq: reduce idling only in symmetric scenarios") does plug I/O in such an asymmetric scenario. Plugging minimizes the delay induced by already in-flight I/O, and enables Q to recover the bandwidth it may lose because of this delay. Yet the above commit does not cover the case of weight-raised queues, for efficiency concerns. For weight-raised queues, I/O-dispatch plugging is activated simply if not all bfq_queues are weight-raised. But this check does not handle the case of in-flight requests, because a bfq_queue may become non busy *before* all its in-flight requests are completed. This commit performs I/O-dispatch plugging for weight-raised queues if there are some in-flight requests. As a practical example of the resulting recover of control, under write load on a Samsung SSD 970 PRO, gnome-terminal starts in 1.5 seconds after this fix, against 15 seconds before the fix (as a reference, gnome-terminal takes about 35 seconds to start with any of the other I/O schedulers). Fixes: 1de0c4cd9ea6 ("block, bfq: reduce idling only in symmetric scenarios") Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | docs: block: convert to ReSTMauro Carvalho Chehab2019-07-151-1/+1
|/ | | | | | | | | | | Rename the block documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-blockLinus Torvalds2019-07-091-296/+671
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block updates from Jens Axboe: "This is the main block updates for 5.3. Nothing earth shattering or major in here, just fixes, additions, and improvements all over the map. This contains: - Series of documentation fixes (Bart) - Optimization of the blk-mq ctx get/put (Bart) - null_blk removal race condition fix (Bob) - req/bio_op() cleanups (Chaitanya) - Series cleaning up the segment accounting, and request/bio mapping (Christoph) - Series cleaning up the page getting/putting for bios (Christoph) - block cgroup cleanups and moving it to where it is used (Christoph) - block cgroup fixes (Tejun) - Series of fixes and improvements to bcache, most notably a write deadlock fix (Coly) - blk-iolatency STS_AGAIN and accounting fixes (Dennis) - Series of improvements and fixes to BFQ (Douglas, Paolo) - debugfs_create() return value check removal for drbd (Greg) - Use struct_size(), where appropriate (Gustavo) - Two lighnvm fixes (Heiner, Geert) - MD fixes, including a read balance and corruption fix (Guoqing, Marcos, Xiao, Yufen) - block opal shadow mbr additions (Jonas, Revanth) - sbitmap compare-and-exhange improvemnts (Pavel) - Fix for potential bio->bi_size overflow (Ming) - NVMe pull requests: - improved PCIe suspent support (Keith Busch) - error injection support for the admin queue (Akinobu Mita) - Fibre Channel discovery improvements (James Smart) - tracing improvements including nvmetc tracing support (Minwoo Im) - misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya Kulkarni)" - Various little fixes and improvements to drivers and core" * tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits) blk-iolatency: fix STS_AGAIN handling block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES blk-mq: simplify blk_mq_make_request() blk-mq: remove blk_mq_put_ctx() sbitmap: Replace cmpxchg with xchg block: fix .bi_size overflow block: sed-opal: check size of shadow mbr block: sed-opal: ioctl for writing to shadow mbr block: sed-opal: add ioctl for done-mark of shadow mbr block: never take page references for ITER_BVEC direct-io: use bio_release_pages in dio_bio_complete block_dev: use bio_release_pages in bio_unmap_user block_dev: use bio_release_pages in blkdev_bio_end_io iomap: use bio_release_pages in iomap_dio_bio_end_io block: use bio_release_pages in bio_map_user_iov block: use bio_release_pages in bio_unmap_user block: optionally mark pages dirty in bio_release_pages block: move the BIO_NO_PAGE_REF check into bio_release_pages block: skd_main.c: Remove call to memset after dma_alloc_coherent block: mtip32xx: Remove call to memset after dma_alloc_coherent ...
| * block, bfq: NULL out the bic when it's no longer validDouglas Anderson2019-06-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In reboot tests on several devices we were seeing a "use after free" when slub_debug or KASAN was enabled. The kernel complained about: Unable to handle kernel paging request at virtual address 6b6b6c2b ...which is a classic sign of use after free under slub_debug. The stack crawl in kgdb looked like: 0 test_bit (addr=<optimized out>, nr=<optimized out>) 1 bfq_bfqq_busy (bfqq=<optimized out>) 2 bfq_select_queue (bfqd=<optimized out>) 3 __bfq_dispatch_request (hctx=<optimized out>) 4 bfq_dispatch_request (hctx=<optimized out>) 5 0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440) 6 0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440) 7 0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440) 8 0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>) 9 0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480) 10 0xc024cff4 in worker_thread (__worker=0xec6d4640) Digging in kgdb, it could be found that, though bfqq looked fine, bfqq->bic had been freed. Through further digging, I postulated that perhaps it is illegal to access a "bic" (AKA an "icq") after bfq_exit_icq() had been called because the "bic" can be freed at some point in time after this call is made. I confirmed that there certainly were cases where the exact crashing code path would access the "bic" after bfq_exit_icq() had been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and saw that the bic was 0x7 at the time of the crash. To understand a bit more about why this crash was fairly uncommon (I saw it only once in a few hundred reboots), you can see that much of the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't access the ->bic anymore. The only case it doesn't is if bfq_put_queue() sees a reference still held. However, even in the case when bfqq isn't freed, the crash is still rare. Why? I tracked what happened to the "bic" after the exit routine. It doesn't get freed right away. Rather, put_io_context_active() eventually called put_io_context() which queued up freeing on a workqueue. The freeing then actually happened later than that through call_rcu(). Despite all these delays, some extra debugging showed that all the hoops could be jumped through in time and the memory could be freed causing the original crash. Phew! To make a long story short, assuming it truly is illegal to access an icq after the "exit_icq" callback is finished, this patch is needed. Cc: stable@vger.kernel.org Reviewed-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: Init saved_wr_start_at_switch_to_srt in unlikely caseDouglas Anderson2019-06-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some debug code suggested by Paolo was tripping when I did reboot stress tests. Specifically in bfq_bfqq_resume_state() "bic->saved_wr_start_at_switch_to_srt" was later than the current value of "jiffies". A bit of debugging showed that "bic->saved_wr_start_at_switch_to_srt" was actually 0 and a bit more debugging showed that was because we had run through the "unlikely" case in the bfq_bfqq_save_state() function. Let's init "saved_wr_start_at_switch_to_srt" in the unlikely case to something sane. NOTE: this fixes no known real-world errors. Reviewed-by: Paolo Valente <paolo.valente@linaro.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: re-schedule empty queues if they deserve I/O pluggingPaolo Valente2019-06-251-184/+203
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consider, on one side, a bfq_queue Q that remains empty while in service, and, on the other side, the pending I/O of bfq_queues that, according to their timestamps, have to be served after Q. If an uncontrolled amount of I/O from the latter bfq_queues were dispatched while Q is waiting for its new I/O to arrive, then Q's bandwidth guarantees would be violated. To prevent this, I/O dispatch is plugged until Q receives new I/O (except for a properly controlled amount of injected I/O). Unfortunately, preemption breaks I/O-dispatch plugging, for the following reason. Preemption is performed in two steps. First, Q is expired and re-scheduled. Second, the new bfq_queue to serve is chosen. The first step is needed by the second, as the second can be performed only after Q's timestamps have been properly updated (done in the expiration step), and Q has been re-queued for service. This dependency is a consequence of the way how BFQ's scheduling algorithm is currently implemented. But Q is not re-scheduled at all in the first step, because Q is empty. As a consequence, an uncontrolled amount of I/O may be dispatched until Q becomes non empty again. This breaks Q's service guarantees. This commit addresses this issue by re-scheduling Q even if it is empty. This in turn breaks the assumption that all scheduled queues are non empty. Then a few extra checks are now needed. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: preempt lower-weight or lower-priority queuesPaolo Valente2019-06-251-20/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BFQ enqueues the I/O coming from each process into a separate bfq_queue, and serves bfq_queues one at a time. Each bfq_queue may be served for at most timeout_sync milliseconds (default: 125 ms). This service scheme is prone to the following inaccuracy. While a bfq_queue Q1 is in service, some empty bfq_queue Q2 may receive I/O, and, according to BFQ's scheduling policy, may become the right bfq_queue to serve, in place of the currently in-service bfq_queue. In this respect, postponing the service of Q2 to after the service of Q1 finishes may delay the completion of Q2's I/O, compared with an ideal service in which all non-empty bfq_queues are served in parallel, and every non-empty bfq_queue is served at a rate proportional to the bfq_queue's weight. This additional delay is equal at most to the time Q1 may unjustly remain in service before switching to Q2. If Q1 and Q2 have the same weight, then this time is most likely negligible compared with the completion time to be guaranteed to Q2's I/O. In addition, first, one of the reasons why BFQ may want to serve Q1 for a while is that this boosts throughput and, second, serving Q1 longer reduces BFQ's overhead. As a conclusion, it is usually better not to preempt Q1 if both Q1 and Q2 have the same weight. In contrast, as Q2's weight or priority becomes higher and higher compared with that of Q1, the above delay becomes larger and larger, compared with the I/O completion times that have to be guaranteed to Q2 according to Q2's weight. So reducing this delay may be more important than avoiding the costs of preempting Q1. Accordingly, this commit preempts Q1 if Q2 has a higher weight or a higher priority than Q1. Preemption causes Q1 to be re-scheduled, and triggers a new choice of the next bfq_queue to serve. If Q2 really is the next bfq_queue to serve, then Q2 will be set in service immediately. This change reduces the component of the I/O latency caused by the above delay by about 80%. For example, on an (old) PLEXTOR PX-256M5 SSD, the maximum latency reported by fio drops from 15.1 to 3.2 ms for a process doing sporadic random reads while another process is doing continuous sequential reads. Signed-off-by: Nicola Bottura <bottura.nicola95@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: detect wakers and unconditionally inject their I/OPaolo Valente2019-06-251-33/+237
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A bfq_queue Q may happen to be synchronized with another bfq_queue Q2, i.e., the I/O of Q2 may need to be completed for Q to receive new I/O. We call Q2 "waker queue". If I/O plugging is being performed for Q, and Q is not receiving any more I/O because of the above synchronization, then, thanks to BFQ's injection mechanism, the waker queue is likely to get served before the I/O-plugging timeout fires. Unfortunately, this fact may not be sufficient to guarantee a high throughput during the I/O plugging, because the inject limit for Q may be too low to guarantee a lot of injected I/O. In addition, the duration of the plugging, i.e., the time before Q finally receives new I/O, may not be minimized, because the waker queue may happen to be served only after other queues. To address these issues, this commit introduces the explicit detection of the waker queue, and the unconditional injection of a pending I/O request of the waker queue on each invocation of bfq_dispatch_request(). One may be concerned that this systematic injection of I/O from the waker queue delays the service of Q's I/O. Fortunately, it doesn't. On the contrary, next Q's I/O is brought forward dramatically, for it is not blocked for milliseconds. Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: bring forward seek&think time updatePaolo Valente2019-06-251-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until the base value for request service times gets finally computed for a bfq_queue, the inject limit for that queue does depend on the think-time state (short|long) of the queue. A timely update of the think time then guarantees a quicker activation or deactivation of the injection. Fortunately, the think time of a bfq_queue is updated in the same code path as the inject limit; but after the inject limit. This commits moves the update of the think time before the update of the inject limit. For coherence, it moves the update of the seek time too. Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: update base request service times when possiblePaolo Valente2019-06-251-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I/O injection gets reduced if it increases the request service times of the victim queue beyond a certain threshold. The threshold, in its turn, is computed as a function of the base service time enjoyed by the queue when it undergoes no injection. As a consequence, for injection to work properly, the above base value has to be accurate. In this respect, such a value may vary over time. For example, it varies if the size or the spatial locality of the I/O requests in the queue change. It is then important to update this value whenever possible. This commit performs this update. Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: fix rq_in_driver check in bfq_update_inject_limitPaolo Valente2019-06-251-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the cases where the parameters for injection may be updated is when there are no more in-flight I/O requests. The number of in-flight requests is stored in the field bfqd->rq_in_driver of the descriptor bfqd of the device. So, the controlled condition is bfqd->rq_in_driver == 0. Unfortunately, this is wrong because, the instruction that checks this condition is in the code path that handles the completion of a request, and, in particular, the instruction is executed before bfqd->rq_in_driver is decremented in such a code path. This commit fixes this issue by just replacing 0 with 1 in the comparison. Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: reset inject limit when think-time state changesPaolo Valente2019-06-251-68/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until the base value of the request service times gets finally computed for a bfq_queue, the inject limit does depend on the think-time state (short|long). The limit must be 0 or 1 if the think time is deemed, respectively, as short or long. However, such a check and possible limit update is performed only periodically, once per second. So, to make the injection mechanism much more reactive, this commit performs the update also every time the think-time state changes. In addition, in the following special case, this commit lets the inject limit of a bfq_queue bfqq remain equal to 1 even if bfqq's think time is short: bfqq's I/O is synchronized with that of some other queue, i.e., bfqq may receive new I/O only after the I/O of the other queue is completed. Keeping the inject limit to 1 allows the blocking I/O to be served while bfqq is in service. And this is very convenient both for bfqq and for the total throughput, as explained in detail in the comments in bfq_update_has_short_ttime(). Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block: rename CONFIG_DEBUG_BLK_CGROUP to CONFIG_BFQ_CGROUP_DEBUGChristoph Hellwig2019-06-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | This option is entirely bfq specific, give it an appropinquate name. Also make it depend on CONFIG_BFQ_GROUP_IOSCHED in Kconfig, as all the functionality already does so anyway. Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block: remove the bi_phys_segments field in struct bioChristoph Hellwig2019-06-201-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only need the number of segments in the blk-mq submission path. Remove the field from struct bio, and return it from a variant of blk_queue_split instead of that it can passed as an argument to those functions that need the value. This also means we stop recounting segments except for cloning and partial segments. To keep the number of arguments in this how path down remove pointless struct request_queue arguments from any of the functions that had it and grew a nr_segs argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: fix operator in BFQQ_TOTALLY_SEEKYPaolo Valente2019-06-251-1/+1
|/ | | | | | | | | | By mistake, there is a '&' instead of a '==' in the definition of the macro BFQQ_TOTALLY_SEEKY. This commit replaces the wrong operator with the correct one. Fixes: 7074f076ff15 ("block, bfq: do not tag totally seeky queues as soft rt") Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: switch all files cleared marked as GPLv2 or later to SPDX tagsChristoph Hellwig2019-05-011-10/+1
| | | | | | | | | All these files have some form of the usual GPLv2 or later boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'v5.1-rc6' into for-5.2/blockJens Axboe2019-04-221-9/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a comment, and is trivial. The other one is a conflict due to a later fix in the bio multi-page work, and needs a bit more care. * tag 'v5.1-rc6': (770 commits) Linux 5.1-rc6 block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt ... Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * bfq: update internal depth state when queue depth changesJens Axboe2019-04-141-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A previous commit moved the shallow depth and BFQ depth map calculations to be done at init time, moving it outside of the hotter IO path. This potentially causes hangs if the users changes the depth of the scheduler map, by writing to the 'nr_requests' sysfs file for that device. Add a blk-mq-sched hook that allows blk-mq to inform the scheduler if the depth changes, so that the scheduler can update its internal state. Tested-by: Kai Krakow <kai@kaishome.de> Reported-by: Paolo Valente <paolo.valente@linaro.org> Fixes: f0635b8a416e ("bfq: calculate shallow depths at init time") Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block, bfq: fix use after free in bfq_bfqq_expirePaolo Valente2019-04-101-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function bfq_bfqq_expire() invokes the function __bfq_bfqq_expire(), and the latter may free the in-service bfq-queue. If this happens, then no other instruction of bfq_bfqq_expire() must be executed, or a use-after-free will occur. Basing on the assumption that __bfq_bfqq_expire() invokes bfq_put_queue() on the in-service bfq-queue exactly once, the queue is assumed to be freed if its refcounter is equal to one right before invoking __bfq_bfqq_expire(). But, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") this assumption is false. __bfq_bfqq_expire() may also invoke bfq_weights_tree_remove() and, since commit 9dee8b3b057e ("block, bfq: fix queue removal from weights tree"), also the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire() may invoke bfq_put_queue() twice, and this is the actual case where the in-service queue may happen to be freed. To address this issue, this commit moves the check on the refcounter of the queue right around the last bfq_put_queue() that may be invoked on the queue. Fixes: 9dee8b3b057e ("block, bfq: fix queue removal from weights tree") Reported-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: fix some typos in commentsAngelo Ruocco2019-04-081-8/+8
| | | | | | | | | | | | | | | | Some of the comments in the bfq files had typos. This patch fixes them. Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: save & resume weight on a queue merge/splitFrancesco Pollicino2019-04-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bfq saves the state of a queue each time a merge occurs, to be able to resume such a state when the queue is associated again with its original process, on a split. Unfortunately bfq does not save & restore also the weight of the queue. If the weight is not correctly resumed when the queue is recycled, then the weight of the recycled queue could differ from the weight of the original queue. This commit adds the missing save & resume of the weight. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: print SHARED instead of pid for shared queues in logsFrancesco Pollicino2019-04-011-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function "bfq_log_bfqq" prints the pid of the process associated with the queue passed as input. Unfortunately, if the queue is shared, then more than one process is associated with the queue. The pid that gets printed in this case is the pid of one of the associated processes. Which process gets printed depends on the exact sequence of merge events the queue underwent. So printing such a pid is rather useless and above all is often rather confusing because it reports a random pid between those of the associated processes. This commit addresses this issue by printing SHARED instead of a pid if the queue is shared. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: always protect newly-created queues from existing active queuesPaolo Valente2019-04-011-13/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If many bfq_queues belonging to the same group happen to be created shortly after each other, then the processes associated with these queues have typically a common goal. In particular, bursts of queue creations are usually caused by services or applications that spawn many parallel threads/processes. Examples are systemd during boot, or git grep. If there are no other active queues, then, to help these processes get their job done as soon as possible, the best thing to do is to reach a high throughput. To this goal, it is usually better to not grant either weight-raising or device idling to the queues associated with these processes. And this is exactly what BFQ currently does. There is however a drawback: if, in contrast, some other queues are already active, then the newly created queues must be protected from the I/O flowing through the already existing queues. In this case, the best thing to do is the opposite as in the other case: it is much better to grant weight-raising and device idling to the newly-created queues, if they deserve it. This commit addresses this issue by doing so if there are already other active queues. This change also helps eliminating false positives, which occur when the newly-created queues do not belong to an actual large burst of creations, but some background task (e.g., a service) happens to trigger the creation of new queues in the middle, i.e., very close to when the victim queues are created. These false positive may cause total loss of control on process latencies. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: do not tag totally seeky queues as soft rtPaolo Valente2019-04-011-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Sync random I/O is likely to be confused with soft real-time I/O, because it is characterized by limited throughput and apparently isochronous arrival pattern. To avoid false positives, this commits prevents bfq_queues containing only random (seeky) I/O from being tagged as soft real-time. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: do not merge queues on flash storage with queueingPaolo Valente2019-04-011-5/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To boost throughput with a set of processes doing interleaved I/O (i.e., a set of processes whose individual I/O is random, but whose merged cumulative I/O is sequential), BFQ merges the queues associated with these processes, i.e., redirects the I/O of these processes into a common, shared queue. In the shared queue, I/O requests are ordered by their position on the medium, thus sequential I/O gets dispatched to the device when the shared queue is served. Queue merging costs execution time, because, to detect which queues to merge, BFQ must maintain a list of the head I/O requests of active queues, ordered by request positions. Measurements showed that this costs about 10% of BFQ's total per-request processing time. Request processing time becomes more and more critical as the speed of the underlying storage device grows. Yet, fortunately, queue merging is basically useless on the very devices that are so fast to make request processing time critical. To reach a high throughput, these devices must have many requests queued at the same time. But, in this configuration, the internal scheduling algorithms of these devices do also the job of queue merging: they reorder requests so as to obtain as much as possible a sequential I/O pattern. As a consequence, with processes doing interleaved I/O, the throughput reached by one such device is likely to be the same, with and without queue merging. In view of this fact, this commit disables queue merging, and all related housekeeping, for non-rotational devices with internal queueing. The total, single-lock-protected, per-request processing time of BFQ drops to, e.g., 1.9 us on an Intel Core i7-2760QM@2.40GHz (time measured with simple code instrumentation, and using the throughput-sync.sh script of the S suite [1], in performance-profiling mode). To put this result into context, the total, single-lock-protected, per-request execution time of the lightest I/O scheduler available in blk-mq, mq-deadline, is 0.7 us (mq-deadline is ~800 LOC, against ~10500 LOC for BFQ). Disabling merging provides a further, remarkable benefit in terms of throughput. Merging tends to make many workloads artificially more uneven, mainly because of shared queues remaining non empty for incomparably more time than normal queues. So, if, e.g., one of the queues in a set of merged queues has a higher weight than a normal queue, then the shared queue may inherit such a high weight and, by staying almost always active, may force BFQ to perform I/O plugging most of the time. This evidently makes it harder for BFQ to let the device reach a high throughput. As a practical example of this problem, and of the benefits of this commit, we measured again the throughput in the nasty scenario considered in previous commit messages: dbench test (in the Phoronix suite), with 6 clients, on a filesystem with journaling, and with the journaling daemon enjoying a higher weight than normal processes. With this commit, the throughput grows from ~150 MB/s to ~200 MB/s on a PLEXTOR PX-256M5 SSD. This is the same peak throughput reached by any of the other I/O schedulers. As such, this is also likely to be the maximum possible throughput reachable with this workload on this device, because I/O is mostly random, and the other schedulers basically just pass I/O requests to the drive as fast as possible. [1] https://github.com/Algodev-github/S Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Alessio Masola <alessio.masola@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: tune service injection basing on request service timesPaolo Valente2019-04-011-36/+381
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The processes associated with a bfq_queue, say Q, may happen to generate their cumulative I/O at a lower rate than the rate at which the device could serve the same I/O. This is rather probable, e.g., if only one process is associated with Q and the device is an SSD. It results in Q becoming often empty while in service. If BFQ is not allowed to switch to another queue when Q becomes empty, then, during the service of Q, there will be frequent "service holes", i.e., time intervals during which Q gets empty and the device can only consume the I/O already queued in its hardware queues. This easily causes considerable losses of throughput. To counter this problem, BFQ implements a request injection mechanism, which tries to fill the above service holes with I/O requests taken from other bfq_queues. The hard part in this mechanism is finding the right amount of I/O to inject, so as to both boost throughput and not break Q's bandwidth and latency guarantees. To this goal, the current version of this mechanism measures the bandwidth enjoyed by Q while it is being served, and tries to inject the maximum possible amount of extra service that does not cause Q's bandwidth to decrease too much. This solution has an important shortcoming. For bandwidth measurements to be stable and reliable, Q must remain in service for a much longer time than that needed to serve a single I/O request. Unfortunately, this does not hold with many workloads. This commit addresses this issue by changing the way the amount of injection allowed is dynamically computed. It tunes injection as a function of the service times of single I/O requests of Q, instead of Q's bandwidth. Single-request service times are evidently meaningful even if Q gets very few I/O requests completed while it is in service. As a testbed for this new solution, we measured the throughput reached by BFQ for one of the nastiest workloads and configurations for this scheduler: the workload generated by the dbench test (in the Phoronix suite), with 6 clients, on a filesystem with journaling, and with the journaling daemon enjoying a higher weight than normal processes. With this commit, the throughput grows from ~100 MB/s to ~150 MB/s on a PLEXTOR PX-256M5. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Francesco Pollicino <fra.fra.800@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: do not idle for lowest-weight queuesPaolo Valente2019-04-011-90/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In most cases, it is detrimental for throughput to plug I/O dispatch when the in-service bfq_queue becomes temporarily empty (plugging is performed to wait for the possible arrival, soon, of new I/O from the in-service queue). There is however a case where plugging is needed for service guarantees. If a bfq_queue, say Q, has a higher weight than some other active bfq_queue, and is sync, i.e., contains sync I/O, then, to guarantee that Q does receive a higher share of the throughput than other lower-weight queues, it is necessary to plug I/O dispatch when Q remains temporarily empty while being served. For this reason, BFQ performs I/O plugging when some active bfq_queue has a higher weight than some other active bfq_queue. But this is unnecessarily overkill. In fact, if the in-service bfq_queue actually has a weight lower than or equal to the other queues, then the queue *must not* be guaranteed a higher share of the throughput than the other queues. So, not plugging I/O cannot cause any harm to the queue. And can boost throughput. Taking advantage of this fact, this commit does not plug I/O for sync bfq_queues with a weight lower than or equal to the weights of the other queues. Here is an example of the resulting throughput boost with the dbench workload, which is particularly nasty for BFQ. With the dbench test in the Phoronix suite, BFQ reaches its lowest total throughput with 6 clients on a filesystem with journaling, in case the journaling daemon has a higher weight than normal processes. Before this commit, the total throughput was ~80 MB/sec on a PLEXTOR PX-256M5, after this commit it is ~100 MB/sec. Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block, bfq: increase idling for weight-raised queuesPaolo Valente2019-04-011-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a sync bfq_queue has a higher weight than some other queue, and remains temporarily empty while in service, then, to preserve the bandwidth share of the queue, it is necessary to plug I/O dispatching until a new request arrives for the queue. In addition, a timeout needs to be set, to avoid waiting for ever if the process associated with the queue has actually finished its I/O. Even with the above timeout, the device is however not fed with new I/O for a while, if the process has finished its I/O. If this happens often, then throughput drops and latencies grow. For this reason, the timeout is kept rather low: 8 ms is the current default. Unfortunately, such a low value may cause, on the opposite end, a violation of bandwidth guarantees for a process that happens to issue new I/O too late. The higher the system load, the higher the probability that this happens to some process. This is a problem in scenarios where service guarantees matter more than throughput. One important case are weight-raised queues, which need to be granted a very high fraction of the bandwidth. To address this issue, this commit lower-bounds the plugging timeout for weight-raised queues to 20 ms. This simple change provides relevant benefits. For example, on a PLEXTOR PX-256M5S, with which gnome-terminal starts in 0.6 seconds if there is no other I/O in progress, the same applications starts in - 0.8 seconds, instead of 1.2 seconds, if ten files are being read sequentially in parallel - 1 second, instead of 2 seconds, if, in parallel, five files are being read sequentially, and five more files are being written sequentially Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=yKonstantin Khlebnikov2019-04-011-1/+1
| | | | | | | | | | | Replace BFQ_GROUP_IOSCHED_ENABLED with CONFIG_BFQ_GROUP_IOSCHED. Code under these ifdefs never worked, something might be broken. Fixes: 0471559c2fbd ("block, bfq: add/remove entity weights correctly") Fixes: 73d58118498b ("block, bfq: consider also ioprio classes in symmetry detection") Reviewed-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block, bfq: fix in-service-queue check for queue mergingPaolo Valente2019-01-311-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a new I/O request arrives for a bfq_queue, say Q, bfq checks whether that request is close to (a) the head request of some other queue waiting to be served, or (b) the last request dispatched for the in-service queue (in case Q itself is not the in-service queue) If a queue, say Q2, is found for which the above condition holds, then bfq merges Q and Q2, to hopefully get a more sequential I/O in the resulting merged queue, and thus a possibly higher throughput. Case (b) is checked by comparing the new request for Q with the last request dispatched, assuming that the latter necessarily belonged to the in-service queue. Unfortunately, this assumption is no longer always correct, since commit d0edc2473be9 ("block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash"). When the assumption does not hold, queues that must not be merged may be merged, causing unexpected loss of control on per-queue service guarantees. This commit solves this problem by adding an extra field, which stores the actual last request dispatched for the in-service queue, and by using this new field to correctly check case (b). Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>