summaryrefslogtreecommitdiffstats
path: root/block/genhd.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* block: fix deadlock between sd_remove & sd_releaseYang Yang2024-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue. Cc: stable@vger.kernel.org Fixes: eec1be4c30df ("block: delete partitions later in del_gendisk") Signed-off-by: Yang Yang <yang.yang@vivo.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixes: and Cc: stable tags are missing. Otherwise this patch looks fine Link: https://lore.kernel.org/r/20240724070412.22521-1-yang.yang@vivo.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: remove disk_update_readaheadChristoph Hellwig2024-06-261-1/+1
| | | | | | | | | | Mark blk_apply_bdi_limits non-static and open code disk_update_readahead in the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240626142637.300624-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'pull-bd_flags-2' of ↵Linus Torvalds2024-05-211-5/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull bdev flags update from Al Viro: "Compactifying bdev flags. We can easily have up to 24 flags with sane atomicity, _without_ pushing anything out of the first cacheline of struct block_device" * tag 'pull-bd_flags-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bdev: move ->bd_make_it_fail to ->__bd_flags bdev: move ->bd_ro_warned to ->__bd_flags bdev: move ->bd_has_subit_bio to ->__bd_flags bdev: move ->bd_write_holder into ->__bd_flags bdev: move ->bd_read_only to ->__bd_flags bdev: infrastructure for flags wrapper for access to ->bd_partno Use bdev_is_paritition() instead of open-coding it
| * bdev: move ->bd_make_it_fail to ->__bd_flagsAl Viro2024-05-031-4/+8
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * bdev: move ->bd_has_subit_bio to ->__bd_flagsAl Viro2024-05-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | In bdev_alloc() we have all flags initialized to false, so assignment to ->bh_has_submit_bio n there is a no-op unless we have partno != 0 and flag already set on entire device. In device_add_disk() we have just allocated the block_device in question and it had been a full-device one, so the flag is guaranteed to be still clear when we get to assignment. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge tag 'pull-bd_inode-1' of ↵Linus Torvalds2024-05-211-4/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull bdev bd_inode updates from Al Viro: "Replacement of bdev->bd_inode with sane(r) set of primitives by me and Yu Kuai" * tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RIP ->bd_inode dasd_format(): killing the last remaining user of ->bd_inode nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode block/bdev.c: use the knowledge of inode/bdev coallocation gfs2: more obvious initializations of mapping->host fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here... grow_dev_folio(): we only want ->bd_inode->i_mapping there use ->bd_mapping instead of ->bd_inode->i_mapping block_device: add a pointer to struct address_space (page cache of bdev) missing helpers: bdev_unhash(), bdev_drop() block: move two helpers into bdev.c block2mtd: prevent direct access of bd_inode dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode) blkdev_write_iter(): saner way to get inode and bdev bcachefs: remove dead function bdev_sectors() ext4: remove block_device_ejected() erofs_buf: store address_space instead of inode erofs: switch erofs_bread() to passing offset instead of block number
| * | use ->bd_mapping instead of ->bd_inode->i_mappingAl Viro2024-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Just the low-hanging fruit... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20240411145346.2516848-2-viro@zeniv.linux.org.uk Signed-off-by: Christian Brauner <brauner@kernel.org>
| * | missing helpers: bdev_unhash(), bdev_drop()Al Viro2024-05-031-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | bdev_unhash(): make block device invisible to lookups by device number bdev_drop(): drop reference to associated inode. Both are internal, for use by genhd and partition-related code - similar to bdev_add(). The logics in there (especially the lifetime-related parts of it) ought to be cleaned up, but that's a separate story; here we just encapsulate getting to associated inode. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | block: fix that util can be greater than 100%Yu Kuai2024-05-091-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | util means the percentage that disk has IO, and theoretically it should not be greater than 100%. However, there is a gap for rq-based disk: io_ticks will be updated when rq is allocated, however, before such rq dispatch to driver, it will not be account as inflight from blk_mq_start_request() hence diskstats_show()/part_stat_show() will not update io_ticks. For example: 1) at t0, issue a new IO, rq is allocated, and blk_account_io_start() update io_ticks; 2) something is wrong with drivers, and the rq can't be dispatched; 3) at t0 + 10s, drivers recovers and rq is dispatched and done, io_ticks is updated; Then if user is using "iostat 1" to monitor "util", between t0 - t0+9s, util will be zero, and between t0+9s - t0+10s, util will be 1000%. Fix this problem by updating io_ticks from diskstats_show() and part_stat_show() if there are rq allocated. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240509123717.3223892-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: support to account io_ticks preciselyYu Kuai2024-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. This behaviour is introduced by commit 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting"), however, there was a key point that is missed that this patch also improve performance a lot: Before the commit: part_round_stats: if (part->stamp != now) stats |= 1; part_in_flight() -> there can be lots of task here in 1 jiffies. part_round_stats_single() __part_stat_add() part->stamp = now; After the commit: update_io_ticks: stamp = part->bd_stamp; if (time_after(now, stamp)) if (try_cmpxchg()) __part_stat_add() -> only one task can reach here in 1 jiffies. Hence in order to account io_ticks precisely, we only need to know if there are IO inflight at most once in one jiffies. Noted that for rq-based device, iterating tags should not be used here because 'tags->lock' is grabbed in blk_mq_find_and_get_req(), hence part_stat_lock_inc/dec() and part_in_flight() is used to trace inflight. The additional overhead is quite little: - per cpu add/dec for each IO for rq-based device; - per cpu sum for each jiffies; And it's verified by null-blk that there are no performance degration under heavy IO pressure. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240509123717.3223892-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: add a partscan sysfs attribute for disksChristoph Hellwig2024-05-031-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Userspace had been unknowingly relying on a non-stable interface of kernel internals to determine if partition scanning is enabled for a given disk. Provide a stable interface for this purpose instead. Cc: stable@vger.kernel.org # 6.3+ Depends-on: 140ce28dd3be ("block: add a disk_has_partscan helper") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-block/ZhQJf8mzq_wipkBH@gardel-login/ Link: https://lore.kernel.org/r/20240502130033.1958492-3-hch@lst.de [axboe: add links and commit message from Keith] Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: add a disk_has_partscan helperChristoph Hellwig2024-05-031-5/+2
| | | | | | | | | | | | | | | | | | | | | | Add a helper to check if partition scanning is enabled instead of open coding the check in a few places. This now always checks for the hidden flag even if all but one of the callers are never reachable for hidden gendisks. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240502130033.1958492-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: Introduce zone write pluggingDamien Le Moal2024-04-171-1/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zone write plugging implements a per-zone "plug" for write operations to control the submission and execution order of write operations to sequential write required zones of a zoned block device. Per-zone plugging guarantees that at any time there is at most only one write request per zone being executed. This mechanism is intended to replace zone write locking which implements a similar per-zone write throttling at the scheduler level, but is implemented only by mq-deadline. Unlike zone write locking which operates on requests, zone write plugging operates on BIOs. A zone write plug is simply a BIO list that is atomically manipulated using a spinlock and a kblockd submission work. A write BIO to a zone is "plugged" to delay its execution if a write BIO for the same zone was already issued, that is, if a write request for the same zone is being executed. The next plugged BIO is unplugged and issued once the write request completes. This mechanism allows to: - Untangle zone write ordering from block IO schedulers. This allows removing the restriction on using mq-deadline for writing to zoned block devices. Any block IO scheduler, including "none" can be used. - Zone write plugging operates on BIOs instead of requests. Plugged BIOs waiting for execution thus do not hold scheduling tags and thus are not preventing other BIOs from executing (reads or writes to other zones). Depending on the workload, this can significantly improve the device use (higher queue depth operation) and performance. - Both blk-mq (request based) zoned devices and BIO-based zoned devices (e.g. device mapper) can use zone write plugging. It is mandatory for the former but optional for the latter. BIO-based drivers can use zone write plugging to implement write ordering guarantees, or the drivers can implement their own if needed. - The code is less invasive in the block layer and is mostly limited to blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and bio.c. Zone write plugging is implemented using struct blk_zone_wplug. This structure includes a spinlock, a BIO list and a work structure to handle the submission of plugged BIOs. Zone write plugs structures are managed using a per-disk hash table. Plugging of zone write BIOs is done using the function blk_zone_write_plug_bio() which returns false if a BIO execution does not need to be delayed and true otherwise. This function is called from blk_mq_submit_bio() after a BIO is split to avoid large BIOs spanning multiple zones which would cause mishandling of zone write plugs. This ichange enables by default zone write plugging for any mq request-based block device. BIO-based device drivers can also use zone write plugging by expliclty calling blk_zone_write_plug_bio() in their ->submit_bio method. For such devices, the driver must ensure that a BIO passed to blk_zone_write_plug_bio() is already split and not straddling zone boundaries. Only write and write zeroes BIOs are plugged. Zone write plugging does not introduce any significant overhead for other operations. A BIO that is being handled through zone write plugging is flagged using the new BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag. The completion of BIOs and requests flagged trigger respectively calls to the functions blk_zone_write_bio_endio() and blk_zone_write_complete_request(). The latter function is used to trigger submission of the next plugged BIO using the zone plug work. blk_zone_write_bio_endio() does the same for BIO-based devices. This ensures that at any time, at most one request (blk-mq devices) or one BIO (BIO-based devices) is being executed for any zone. The handling of zone write plugs using a per-zone plug spinlock maximizes parallelism and device usage by allowing multiple zones to be writen simultaneously without lock contention. Zone write plugging ignores flush BIOs without data. Hovever, any flush BIO that has data is always plugged so that the write part of the flush sequence is serialized with other regular writes. Given that any BIO handled through zone write plugging will be the only BIO in flight for the target zone when it is executed, the unplugging and submission of a BIO will have no chance of successfully merging with plugged requests or requests in the scheduler. To overcome this potential performance degradation, blk_mq_submit_bio() calls the function blk_zone_write_plug_attempt_merge() to try to merge other plugged BIOs with the one just unplugged and submitted. Successful merging is signaled using blk_zone_write_plug_bio_merged(), called from bio_attempt_back_merge(). Furthermore, to avoid recalculating the number of segments of plugged BIOs to attempt merging, the number of segments of a plugged BIO is saved using the new struct bio field __bi_nr_segments. To avoid growing the size of struct bio, this field is added as a union with the bio_cookie field. This is safe to do as polling is always disabled for plugged BIOs. When BIOs are plugged in a zone write plug, the device request queue usage counter is always incremented. This reference is kept and reused for blk-mq devices when the plugged BIO is unplugged and submitted again using submit_bio_noacct_nocheck(). For this case, the unplugged BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and blk_mq_submit_bio() proceeds directly to allocating a new request for the BIO, re-using the usage reference count taken when the BIO was plugged. This extra reference count is dropped in blk_zone_write_plug_attempt_merge() for any plugged BIO that is successfully merged. Given that BIO-based devices will not take this path, the extra reference is dropped after a plugged BIO is unplugged and submitted. Zone write plugs are dynamically allocated and managed using a hash table (an array of struct hlist_head) with RCU protection. A zone write plug is allocated when a write BIO is received for the zone and not freed until the zone is fully written, reset or finished. To detect when a zone write plug can be freed, the write state of each zone is tracked using a write pointer offset which corresponds to the offset of a zone write pointer relative to the zone start. Write operations always increment this write pointer offset. Zone reset operations set it to 0 and zone finish operations set it to the zone size. If a write error happens, the wp_offset value of a zone write plug may become incorrect and out of sync with the device managed write pointer. This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR. The function blk_zone_wplug_handle_error() is called from the new disk zone write plug work when this flag is set. This function executes a report zone to update the zone write pointer offset to the current value as indicated by the device. The disk zone write plug work is scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes with an error or when bio_zone_wplug_prepare_bio() detects an unaligned write. Once scheduled, the disk zone write plugs work keeps running until all zone errors are handled. To match the new data structures used for zoned disks, the function disk_free_zone_bitmaps() is renamed to the more generic disk_free_zone_resources(). The function disk_init_zone_resources() is also introduced to initialize zone write plugs resources when a gendisk is allocated. In order to guarantee that the user can simultaneously write up to a number of zones equal to a device max active zone limit or max open zone limit, zone write plugs are allocated using a mempool sized to the maximum of these 2 device limits. For a device that does not have active and open zone limits, 128 is used as the default mempool size. If a change to the device active and open zone limits is detected, the disk mempool is resized when blk_revalidate_disk_zones() is executed. This commit contains contributions from Christoph Hellwig <hch@lst.de>. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linuxLinus Torvalds2024-03-111-6/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block updates from Jens Axboe: - MD pull requests via Song: - Cleanup redundant checks (Yu Kuai) - Remove deprecated headers (Marc Zyngier, Song Liu) - Concurrency fixes (Li Lingfeng) - Memory leak fix (Li Nan) - Refactor raid1 read_balance (Yu Kuai, Paul Luse) - Clean up and fix for md_ioctl (Li Nan) - Other small fixes (Gui-Dong Han, Heming Zhao) - MD atomic limits (Christoph) - NVMe pull request via Keith: - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith) - Improvement and cleanup for cached request handling (Christoph) - Moving towards atomic queue limits. Core changes and driver bits so far (Christoph) - Fix UAF issues in aoeblk (Chun-Yi) - Zoned fix and cleanups (Damien) - s390 dasd cleanups and fixes (Jan, Miroslav) - Block issue timestamp caching (me) - noio scope guarding for zoned IO (Johannes) - block/nvme PI improvements (Kanchan) - Ability to terminate long running discard loop (Keith) - bdev revalidation fix (Li) - Get rid of old nr_queues hack for kdump kernels (Ming) - Support for async deletion of ublk (Ming) - Improve IRQ bio recycling (Pavel) - Factor in CPU capacity for remote vs local completion (Qais) - Add shared_tags configfs entry for null_blk (Shin'ichiro - Fix for a regression in page refcounts introduced by the folio unification (Tony) - Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid, Ricardo, Roman, Tang, Uwe) * tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits) block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC block/swim: Convert to platform remove callback returning void cdrom: gdrom: Convert to platform remove callback returning void block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper bcache: move calculation of stripe_size and io_opt into bcache_device_init virtio_blk: Do not use disk_set_max_open/active_zones() aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts block: move capacity validation to blkpg_do_ioctl() block: prevent division by zero in blk_rq_stat_sum() drbd: atomically update queue limits in drbd_reconsider_queue_parameters ...
| * block: make block_class constantRicardo B. Marliere2024-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the block_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305-class_cleanup-block-v1-1-130bb27b9c72@marliere.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block: pass a queue_limits argument to blk_alloc_diskChristoph Hellwig2024-02-201-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Also change blk_alloc_disk to return an ERR_PTR instead of just NULL which can't distinguish errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block: pass a queue_limits argument to blk_alloc_queueChristoph Hellwig2024-02-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Pass a queue_limits to blk_alloc_queue and apply it after validating and capping the values using blk_validate_limits. This will allow allocating queues with valid queue limits instead of setting the values one at a time later. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240213073425.1621680-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block/genhd: port disk_scan_partitions() to fileChristian Brauner2024-02-251-6/+6
|/ | | | | | | | | | | | | | | This may run from a kernel thread via device_add_disk(). So this could also use __fput_sync() if we were worried about EBUSY. But when it is called from a kernel thread it's always BLK_OPEN_READ so EBUSY can't really happen even if we do BLK_OPEN_RESTRICT_WRITES or BLK_OPEN_EXCL. Otherwise it's called from an ioctl on the block device which is only called from userspace and can rely on task work. Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-3-adbd023e19cc@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
* block: add check of 'minors' and 'first_minor' in device_add_disk()Li Nan2023-12-191-1/+3
| | | | | | | | | | | | | | | | 'first_minor' represents the starting minor number of disks, and 'minors' represents the number of partitions in the device. Neither of them can be greater than MINORMASK + 1. Commit e338924bd05d ("block: check minor range in device_add_disk()") only added the check of 'first_minor + minors'. However, their sum might be less than MINORMASK but their values are wrong. Complete the checks now. Fixes: e338924bd05d ("block: check minor range in device_add_disk()") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231219075942.840255-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: Set memalloc_noio to false on device_add_disk() error pathLi Nan2023-12-131-0/+1
| | | | | | | | | | | | | On the error path of device_add_disk(), device's memalloc_noio flag was set but not cleared. As the comment of pm_runtime_set_memalloc_noio(), "The function should be called between device_add() and device_del()". Clear this flag before device_del() now. Fixes: 25e823c8c37d ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: assert that we're not holding open_mutex over blk_report_disk_deadChristian Brauner2023-10-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | blk_report_disk_dead() has the following major callers: (1) del_gendisk() (2) blk_mark_disk_dead() Since del_gendisk() acquires disk->open_mutex it's clear that all callers are assumed to be called without disk->open_mutex held. In turn, blk_report_disk_dead() is called without disk->open_mutex held in del_gendisk(). All callers of blk_mark_disk_dead() call it without disk->open_mutex as well. Ensure that it is clear that blk_report_disk_dead() is called without disk->open_mutex on purpose by asserting it and a comment in the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231017184823.1383356-5-hch@lst.de Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
* block: Use bdev_open_by_dev() in disk_scan_partitions() and blkdev_bszset()Jan Kara2023-10-281-6/+6
| | | | | | | | | | | Convert disk_scan_partitions() and blkdev_bszset() to use bdev_open_by_dev(). Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-3-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org>
* block: call into the file system for bdev_mark_deadChristoph Hellwig2023-08-211-20/+24
| | | | | | | | | | | | | | Combine the newly merged bdev_mark_dead helper with the existing mark_dead holder operation so that all operations that invalidate a device that is dead or being removed now go through the holder ops. This allows file systems to explicitly shutdown either ASAP (for a surprise removal) or after writing back data (for an orderly removal), and do so not only for the main device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-15-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
* block: consolidate __invalidate_device and fsync_bdevChristoph Hellwig2023-08-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | We currently have two interfaces that take a block_devices and the find a mounted file systems to flush or invaldidate data on it. Both are a bit problematic because they only work for the "main" block devices that is used as s_dev for the super_block, and because they don't call into the file system at all. Merge the two into a new bdev_mark_dead helper that does both the syncing and invalidation and which is properly documented. This is in preparation of merging the functionality into the ->mark_dead holder operation so that it will work on additional block devices used by a file systems and give us a single entry point for invalidation of dead devices or media. Note that a single standalone fsync_bdev call for an obscure ioctl remains for now, but that one will also be deal with in a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-14-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
* block: fix the exclusive open mask in disk_scan_partitionsChristoph Hellwig2023-06-211-1/+1
| | | | | | | | | | | FMODE_EXEC has nothing to do with exclusive opens, and even is of the wrong type. We need to check for BLK_OPEN_EXCL here. Fixes: 985958b8584c ("block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230621124914.185992-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()Yu Kuai2023-06-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | After commit 2736e8eeb0cc ("block: use the holder as indication for exclusive opens"), blkdev_get_by_dev() will warn if holder is NULL and mode contains 'FMODE_EXCL'. holder from blkdev_get_by_dev() from disk_scan_partitions() is always NULL, hence it should not use 'FMODE_EXCL', which is broben by the commit. For consequence, WARN_ON_ONCE() will be triggered from blkdev_get_by_dev() if user scan partitions with device opened exclusively. Fix this problem by removing 'FMODE_EXCL' from disk_scan_partitions(), as it used to be. Reported-by: syzbot+00cd27751f78817f167b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=00cd27751f78817f167b Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230618140402.7556-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: fix blktrace debugfs entries leakageYu Kuai2023-06-151-1/+4
| | | | | | | | | | | | | | | | | | | | | Commit 99d055b4fd4b ("block: remove per-disk debugfs files in blk_unregister_queue") moves blk_trace_shutdown() from blk_release_queue() to blk_unregister_queue(), this is safe if blktrace is created through sysfs, however, there is a regression in corner case. blktrace can still be enabled after del_gendisk() through ioctl if the disk is opened before del_gendisk(), and if blktrace is not shutdown through ioctl before closing the disk, debugfs entries will be leaked. Fix this problem by shutdown blktrace in disk_release(), this is safe because blk_trace_remove() is reentrant. Fixes: 99d055b4fd4b ("block: remove per-disk debugfs files in blk_unregister_queue") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230610022003.2557284-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: replace fmode_t with a block-specific type for block open flagsChristoph Hellwig2023-06-121-4/+4
| | | | | | | | | | | | | | The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: use the holder as indication for exclusive opensChristoph Hellwig2023-06-121-3/+2
| | | | | | | | | | | | | | | | | | The current interface for exclusive opens is rather confusing as it requires both the FMODE_EXCL flag and a holder. Remove the need to pass FMODE_EXCL and just key off the exclusive open off a non-NULL holder. For blkdev_put this requires adding the holder argument, which provides better debug checking that only the holder actually releases the hold, but at the same time allows removing the now superfluous mode argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: move more code to early-lookup.cChristoph Hellwig2023-06-051-92/+0
| | | | | | | | | | | | blk_lookup_devt is only used by code in early-lookup.c, so move it there. printk_all_partitions and it's helper bdevt_str are only used by the early init code in init/do_mounts.c, so they should go there as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230531125535.676098-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: add a mark_dead holder operationChristoph Hellwig2023-06-051-0/+24
| | | | | | | | | | | | | Add a mark_dead method to blk_holder_ops that is called from blk_mark_disk_dead to notify the holder that the block device it is using has been marked dead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: introduce holder opsChristoph Hellwig2023-06-051-2/+4
| | | | | | | | | | | | | | Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and installed in the block_device for exclusive claims. It will be used to allow the block layer to call back into the user of the block device for thing like notification of a removed device or a device resize. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: delete partitions later in del_gendiskChristoph Hellwig2023-06-051-5/+19
| | | | | | | | | | | | | | | | | | | Delay dropping the block_devices for partitions in del_gendisk until after the call to blk_mark_disk_dead, so that we can implementat notification of removed devices in blk_mark_disk_dead. This requires splitting a lower-level drop_partition helper out of delete_partition and using that from del_gendisk, while having a common loop for the whole device and partitions that calls remove_inode_hash, fsync_bdev and __invalidate_device before the call to blk_mark_disk_dead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: avoid repeated work in blk_mark_disk_deadChristoph Hellwig2023-06-051-1/+3
| | | | | | | | | | | | | Check if GD_DEAD is already set in blk_mark_disk_dead, and don't duplicate the work already done. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: consolidate the shutdown logic in blk_mark_disk_dead and del_gendiskChristoph Hellwig2023-06-051-14/+12
| | | | | | | | | | | | | | | | | | | | | | blk_mark_disk_dead does very similar work a a section of del_gendisk: - set the GD_DEAD flag - set the capacity to zero - start a queue drain but del_gendisk also sets QUEUE_FLAG_DYING on the queue if it is owned by the disk, sets the capacity to zero before starting the drain, and both with sending a uevent and kernel message for this fake capacity change. Move the exact logic from the more heavily used del_gendisk into blk_mark_disk_dead and then call blk_mark_disk_dead from del_gendisk. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Link: https://lore.kernel.org/r/20230601094459.1350643-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: Replace all non-returning strlcpy with strscpyAzeem Shaikh2023-06-011-1/+1
| | | | | | | | | | | | | | | | | | strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230530155608.272266-1-azeemshaikh38@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linuxLinus Torvalds2023-05-061-14/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more block updates from Jens Axboe: - MD pull request via Song: - Improve raid5 sequential IO performance on spinning disks, which fixes a regression since v6.0 (Jan Kara) - Fix bitmap offset types, which fixes an issue introduced in this merge window (Jonathan Derrick) - Cleanup of hweight type used for cgroup writeback (Maxim) - Fix a regression with the "has_submit_bio" changes across partitions (Ming) - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing. We used to set this flag on queues non blk-mq queues, and hence some drivers clear it unconditionally. Since all of these have since been converted to true blk-mq drivers, drop the useless clear as the bit is not set (Chaitanya) - Fix the flags being set in a bio for a flush for drbd (Christoph) - Cleanup and deduplication of the code handling setting block device capacity (Damien) - Fix for ublk handling IO timeouts (Ming) - Fix for a regression in blk-cgroup teardown (Tao) - NBD documentation and code fixes (Eric) - Convert blk-integrity to using device_attributes rather than a second kobject to manage lifetimes (Thomas) * tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux: ublk: add timeout handler drbd: correctly submit flush bio on barrier mailmap: add mailmap entries for Jens Axboe block: Skip destroyed blkg when restart in blkg_destroy_all() writeback: fix call of incorrect macro md: Fix bitmap offset type in sb writer md/raid5: Improve performance for sequential IO docs nbd: userspace NBD now favors github over sourceforge block nbd: use req.cookie instead of req.handle uapi nbd: add cookie alias to handle uapi nbd: improve doc links to userspace spec blk-integrity: register sysfs attributes on struct device blk-integrity: convert to struct device_attribute blk-integrity: use sysfs_emit block/drivers: remove dead clear of random flag block: sync part's ->bd_has_submit_bio with disk's block: Cleanup set_capacity()/bdev_set_nr_sectors()
| * blk-integrity: register sysfs attributes on struct deviceThomas Weißschuh2023-04-271-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "integrity" kobject only acted as a holder for static sysfs entries. It also was embedded into struct gendisk without managing it, violating assumptions of the driver core. Instead register the sysfs entries directly onto the struct device. Also drop the now unused member integrity_kobj from struct gendisk. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230309-kobj_release-gendisk_integrity-v3-3-ceccb4493c46@weissschuh.net Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block: Cleanup set_capacity()/bdev_set_nr_sectors()Damien Le Moal2023-04-241-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code for setting a block device capacity (bd_nr_sectors field of struct block_device) is duplicated in set_capacity() and bdev_set_nr_sectors(). Clean this up by making bdev_set_nr_sectors() a block layer internal function defined in block/bdev.c instead of having this function statically defined in block/partitions/core.c. With this change, set_capacity() implementation can be simplified to only calling bdev_set_nr_sectors(). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230424131318.79935-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds2023-04-271-13/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
| * \ Merge 6.3-rc5 into driver-core-nextGreg Kroah-Hartman2023-04-031-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | driver core: class: remove dev_kobj from struct classGreg Kroah-Hartman2023-03-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dev_kobj field in struct class is now only written to, but never read from, so it can be removed as it is useless. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230331093318.82288-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2Greg Kroah-Hartman2023-03-061-12/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYSFS_DEPRECATED was added in commit 88a22c985e35 ("CONFIG_SYSFS_DEPRECATED") in 2006 to allow systems with older versions of some tools (i.e. Fedora 3's version of udev) to boot properly. Four years later, in 2010, the option was attempted to be removed as most of userspace should have been fixed up properly by then, but some kernel developers clung to those old systems and refused to update, so we added CONFIG_SYSFS_DEPRECATED_V2 in commit e52eec13cd6b ("SYSFS: Allow boot time switching between deprecated and modern sysfs layout") to allow them to continue to boot properly, and we allowed a boot time parameter to be used to switch back to the old format if needed. Over time, the logic that was covered under these config options was slowly removed from individual driver subsystems successfully, removed, and the only thing that is now left in the kernel are some changes in the block layer's representation in sysfs where real directories are used instead of symlinks like normal. Because the original changes were done to userspace tools in 2006, and all distros that use those tools are long end-of-life, and older non-udev-based systems do not care about the block layer's sysfs representation, it is time to finally remove this old logic and the config entries from the kernel. Cc: Jonathan Corbet <corbet@lwn.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-block@vger.kernel.org Cc: linux-doc@vger.kernel.org Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230223073326.2073220-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linuxLinus Torvalds2023-04-261-0/+3
|\ \ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block updates from Jens Axboe: - drbd patches, bringing us closer to unifying the out-of-tree version and the in tree one (Andreas, Christoph) - support for auto-quiesce for the s390 dasd driver (Stefan) - MD pull request via Song: - md/bitmap: Optimal last page size (Jon Derrick) - Various raid10 fixes (Yu Kuai, Li Nan) - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk) - NVMe pull request via Christoph: - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - Validate nvmet module parameters (Chaitanya Kulkarni) - Fence TCP socket on receive error (Chris Leech) - Fix async event trace event (Keith Busch) - Minor cleanups (Chaitanya Kulkarni, zhenwei pi) - Fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - Fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - Fix irq locking in nvme-fcloop (Ming Lei) - Remove queue mapping helper for rdma devices (Sagi Grimberg) - use structured request attribute checks for nbd (Jakub) - fix blk-crypto race conditions between keyslot management (Eric) - add sed-opal support for reading read locking range attributes (Ondrej) - make fault injection configurable for null_blk (Akinobu) - clean up the request insertion API (Christoph) - clean up the queue running API (Christoph) - blkg config helper cleanups (Tejun) - lazy init support for blk-iolatency (Tejun) - various fixes and tweaks to ublk (Ming) - remove hybrid polling. It hasn't really been useful since we got async polled IO support, and these days we don't support sync polled IO at all (Keith) - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming, Chaitanya, me) * tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits) nbd: fix incomplete validation of ioctl arg ublk: don't return 0 in case of any failure sed-opal: geometry feature reporting command null_blk: Always check queue mode setting from configfs block: ublk: switch to ioctl command encoding blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush block, bfq: Fix division by zero error on zero wsum fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m block: store bdev->bd_disk->fops->submit_bio state in bdev block: re-arrange the struct block_device fields for better layout md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer ...
| * | | block: store bdev->bd_disk->fops->submit_bio state in bdevJens Axboe2023-04-161-0/+3
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | We have a long chain of memory dereferencing just to whether or not this disk has a special submit_bio helper. As that's not necessarily the common case, add a bd_has_submit_bio state in the bdev to avoid traversing this memory dependency chain if we don't need to. Signed-off-by: Jens Axboe <axboe@kernel.dk>
* / | block: don't set GD_NEED_PART_SCAN if scan partition failedYu Kuai2023-04-071-1/+7
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* / block: fix wrong mode for blkdev_put() from disk_scan_partitions()Yu Kuai2023-03-071-1/+1
|/ | | | | | | | | | | | | | | | | If disk_scan_partitions() is called with 'FMODE_EXCL', blkdev_get_by_dev() will be called without 'FMODE_EXCL', however, follow blkdev_put() is still called with 'FMODE_EXCL', which will cause 'bd_holders' counter to leak. Fix the problem by using the right mode for blkdev_put(). Reported-by: syzbot+2bcc0d79e548c4f62a59@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/f9649d501bc8c3444769418f6c26263555d9d3be.camel@linux.ibm.com/T/ Tested-by: Julian Ruess <julianr@linux.ibm.com> Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linuxLinus Torvalds2023-03-031-9/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - Don't access released socket during error recovery (Akinobu Mita) - Bring back auto-removal of deleted namespaces during sequential scan (Christoph Hellwig) - Fix an error code in nvme_auth_process_dhchap_challenge (Dan Carpenter) - Show well known discovery name (Daniel Wagner) - Add a missing endianess conversion in effects masking (Keith Busch) - Fix for a regression introduced in blk-rq-qos during init in this merge window (Breno) - Reorder a few fields in struct blk_mq_tag_set, eliminating a few holes and shrinking it (Christophe) - Remove redundant bdev_get_queue() NULL checks (Juhyung) - Add sed-opal single user mode support flag (Luca) - Remove SQE128 check in ublk as it isn't needed, saving some memory (Ming) - Op specific segment checking for cloned requests (Uday) - Exclusive open partition scan fixes (Yu) - Loop offset/size checking before assigning them in the device (Zhong) - Bio polling fixes (me) * tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux: blk-mq: enforce op-specific segment limits in blk_insert_cloned_request nvme-fabrics: show well known discovery name nvme-tcp: don't access released socket during error recovery nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge() nvme: bring back auto-removal of deleted namespaces during sequential scan blk-iocost: Pass gendisk to ioc_refresh_params nvme: fix sparse warning on effects masking block: be a bit more careful in checking for NULL bdev while polling block: clear bio->bi_bdev when putting a bio back in the cache loop: loop_set_status_from_info() check before assignment ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd block: remove more NULL checks after bdev_get_queue() blk-mq: Reorder fields in 'struct blk_mq_tag_set' block: fix scan partition for exclusively open device again block: Revert "block: Do not reread partition table on exclusively open device" sed-opal: add support flag for SUM in status ioctl
| * block: fix scan partition for exclusively open device againYu Kuai2023-02-171-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As explained in commit 36369f46e917 ("block: Do not reread partition table on exclusively open device"), reread partition on the device that is exclusively opened by someone else is problematic. This patch will make sure partition scan will only be proceed if current thread open the device exclusively, or the device is not opened exclusively, and in the later case, other scanners and exclusive openers will be blocked temporarily until partition scan is done. Fixes: 10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions") Cc: <stable@vger.kernel.org> Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230217022200.3092987-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * block: Revert "block: Do not reread partition table on exclusively open device"Yu Kuai2023-02-171-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 36369f46e91785688a5f39d7a5590e3f07981316. This patch can't fix the problem in a corner case that device can be opened exclusively after the checking and before blkdev_get_by_dev(). We'll use a new solution to fix the problem in the next patch, and the new solution doesn't need to change apis. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230217022200.3092987-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 18:36:56 +0100