summaryrefslogtreecommitdiffstats
path: root/drivers/Makefile (follow)
Commit message (Collapse)AuthorAgeFilesLines
* peci: Add core infrastructureIwona Winiarska2022-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Intel processors provide access for various services designed to support processor and DRAM thermal management, platform manageability and processor interface tuning and diagnostics. Those services are available via the Platform Environment Control Interface (PECI) that provides a communication channel between the processor and the Baseboard Management Controller (BMC) or other platform management device. This change introduces PECI subsystem by adding the initial core module and API for controller drivers. Co-developed-by: Jason M Bills <jason.m.bills@linux.intel.com> Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jason M Bills <jason.m.bills@linux.intel.com> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-5-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* virtio: always enter drivers/virtio/Arnd Bergmann2021-12-081-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When neither VIRTIO_PCI_LIB nor VIRTIO are enabled, but the alibaba vdpa driver is, the kernel runs into a link error because the legacy virtio module never gets built: x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_features': eni_vdpa.c:(.text+0x23f): undefined reference to `vp_legacy_set_features' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_state': eni_vdpa.c:(.text+0x2fe): undefined reference to `vp_legacy_get_queue_enable' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_address': eni_vdpa.c:(.text+0x376): undefined reference to `vp_legacy_set_queue_address' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_ready': eni_vdpa.c:(.text+0x3b4): undefined reference to `vp_legacy_set_queue_address' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_free_irq': eni_vdpa.c:(.text+0x460): undefined reference to `vp_legacy_queue_vector' x86_64-linux-ld: eni_vdpa.c:(.text+0x4b7): undefined reference to `vp_legacy_config_vector' x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_reset': When VIRTIO_PCI_LIB was added, it was correctly added to drivers/Makefile as well, but for the legacy module, this is missing. Solve this by always entering drivers/virtio during the build and letting its Makefile take care of the individual options, rather than having a separate line for each sub-option. Fixes: 64b9f64f80a6 ("vdpa: introduce virtio pci driver") Fixes: e85087beedca ("eni_vdpa: add vDPA driver for Alibaba ENI") Fixes: d89c8169bd70 ("virtio-pci: introduce legacy device module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211206085034.2836099-1-arnd@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remove the lightnvm subsystemChristoph Hellwig2021-08-141-1/+0
| | | | | | | | | | | | | Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts to produce Open Channel SSDs and never made it into the NVMe spec proper. They have since been superceeded by NVMe enhancements such as ZNS support. Remove the support per the deprecation schedule. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de Reviewed-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'hyperv-next-signed-20210629' of ↵Linus Torvalds2021-06-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Just a few minor enhancement patches and bug fixes" * tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv() Drivers: hv: Move Hyper-V extended capability check to arch neutral code drivers: hv: Fix missing error code in vmbus_connect() x86/hyperv: fix logical processor creation hv_utils: Fix passing zero to 'PTR_ERR' warning scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer hv_balloon: Remove redundant assignment to region_start
| * Drivers: hv: Move Hyper-V extended capability check to arch neutral codeMichael Kelley2021-06-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extended capability query code is currently under arch/x86, but it is architecture neutral, and is used by arch neutral code in the Hyper-V balloon driver. Hence the balloon driver fails to build on other architectures. Fix by moving the ext cap code out from arch/x86. Because it is also called from built-in architecture specific code, it can't be in a module, so the Makefile treats as built-in even when CONFIG_HYPERV is "m". Also drivers/Makefile is tweaked because this is the first occurrence of a Hyper-V file that is built-in even when CONFIG_HYPERV is "m". While here, update the hypercall status check to use the new helper function instead of open coding. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com> Link: https://lore.kernel.org/r/1622669804-2016-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
* | ide: remove the legacy ide driverChristoph Hellwig2021-06-161-1/+0
|/ | | | | | | | | The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2021-05-051-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull virtio updates from Michael Tsirkin: "A bunch of new drivers including vdpa support for block and virtio-vdpa. Beginning of vq kick (aka doorbell) mapping support. Misc fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits) virtio_pci_modern: correct sparse tags for notify virtio_pci_modern: __force cast the notify mapping vDPA/ifcvf: get_config_size should return dev specific config size vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA vDPA/ifcvf: deduce VIRTIO device ID when probe vdpa_sim_blk: add support for vdpa management tool vdpa_sim_blk: handle VIRTIO_BLK_T_GET_ID vdpa_sim_blk: implement ramdisk behaviour vdpa: add vdpa simulator for block device vhost/vdpa: Remove the restriction that only supports virtio-net devices vhost/vdpa: use get_config_size callback in vhost_vdpa_config_validate() vdpa: add get_config_size callback in vdpa_config_ops vdpa_sim: cleanup kiovs in vdpasim_free() vringh: add vringh_kiov_length() helper vringh: implement vringh_kiov_advance() vringh: explain more about cleaning riov and wiov vringh: reset kiov 'consumed' field in __vringh_iov() vringh: add 'iotlb_lock' to synchronize iotlb accesses vdpa_sim: use iova module to allocate IOVA addresses vDPA/ifcvf: deduce VIRTIO device ID from pdev ids ...
| * vdpa: introduce virtio pci driverJason Wang2021-05-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduce a vDPA driver for virtio-pci device. It bridges the virtio-pci control command to the vDPA bus. This will be used for features prototyping and testing. Note that get/restore virtqueue state is not supported which needs extension on the virtio specification. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210223061905.422659-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | staging: comedi: move out of staging directoryGreg Kroah-Hartman2021-04-151-0/+1
|/ | | | | | | | | | | | | | | | | The comedi code came into the kernel back in 2008, but traces its lifetime to much much earlier. It's been polished and buffed and there's really nothing preventing it from being part of the "real" portion of the kernel. So move it to drivers/comedi/ as it belongs there. Many thanks to the hundreds of developers who did the work to make this happen. Cc: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'sfi-removal-5.12-rc1' of ↵Linus Torvalds2021-02-241-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki: "Drop support for depercated platforms using SFI, drop the entire support for SFI that has been long deprecated too and make some janitorial changes on top of that (Andy Shevchenko)" * tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/platform/intel-mid: Update Copyright year and drop file names x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co. x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h x86/PCI: Describe @reg for type1_access_ok() x86/PCI: Get rid of custom x86 model comparison sfi: Remove framework for deprecated firmware cpufreq: sfi-cpufreq: Remove driver for deprecated firmware media: atomisp: Remove unused header mfd: intel_msic: Remove driver for deprecated platform x86/apb_timer: Remove driver for deprecated platform x86/platform/intel-mid: Remove unused leftovers (vRTC) x86/platform/intel-mid: Remove unused leftovers (msic) x86/platform/intel-mid: Remove unused leftovers (msic_thermal) x86/platform/intel-mid: Remove unused leftovers (msic_power_btn) x86/platform/intel-mid: Remove unused leftovers (msic_gpio) x86/platform/intel-mid: Remove unused leftovers (msic_battery) x86/platform/intel-mid: Remove unused leftovers (msic_ocd) x86/platform/intel-mid: Remove unused leftovers (msic_audio) platform/x86: intel_scu_wdt: Drop mistakenly added const
| * sfi: Remove framework for deprecated firmwareAndy Shevchenko2021-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | SFI-based platforms are gone. So does this framework. This removes mention of SFI through the drivers and other code as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpointsDan Williams2021-02-171-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds2020-12-161-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
| * timekeeping: remove arch_gettimeoffsetArnd Bergmann2020-10-301-2/+0
| | | | | | | | | | | | | | | | | | With Arm EBSA110 gone, nothing uses it any more, so the corresponding code and the Kconfig option can be removed. Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | vdpa: mlx5: fix vdpa/vhost dependenciesRandy Dunlap2020-12-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select VHOST_IOTLB to make them be built. However, if VHOST_IOTLB is the only VHOST symbol that is set/enabled, the object file still won't be built because drivers/Makefile won't descend into drivers/vhost/ to build it, so make drivers/Makefile build the needed binary whenever VHOST_IOTLB is set, like it does for VHOST_RING. Fixes these build errors: ERROR: modpost: "vhost_iotlb_itree_next" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined! ERROR: modpost: "vhost_iotlb_itree_first" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined! Fixes: 29064bfdabd5 ("vdpa/mlx5: Add support library for mlx5 VDPA implementation") Fixes: aff90770e54c ("vdpa/mlx5: Fix dependency on MLX5_CORE") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eli Cohen <eli@mellanox.com> Cc: Parav Pandit <parav@mellanox.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20201128213905.27409-1-rdunlap@infradead.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2020-04-081-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull virtio updates from Michael Tsirkin: - Some bug fixes - The new vdpa subsystem with two first drivers * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM" vdpa: move to drivers/vdpa virtio: Intel IFC VF driver for VDPA vdpasim: vDPA device simulator vhost: introduce vDPA-based backend virtio: introduce a vDPA based transport vDPA: introduce vDPA bus vringh: IOTLB support vhost: factor out IOTLB vhost: allow per device message handler vhost: refine vhost and vringh kconfig virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM virtio-net: Introduce hash report feature virtio-net: Introduce RSS receive steering feature virtio-net: Introduce extended RSC feature tools/virtio: option to build an out of tree module
| * vdpa: move to drivers/vdpaMichael S. Tsirkin2020-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | We have both vhost and virtio drivers that depend on vdpa. It's easier to locate it at a top level directory otherwise we run into issues e.g. if vhost is built-in but virtio is modular. Let's just move it up a level. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | staging: most: move core files out of the staging areaChristian Gromm2020-03-241-0/+1
|/ | | | | | | | | This patch moves the core module to the /drivers/most directory and makes all necessary changes in order to not break the build. Signed-off-by: Christian Gromm <christian.gromm@microchip.com> Link: https://lore.kernel.org/r/1583845362-26707-2-git-send-email-christian.gromm@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Update Kconfig entries to USB4Mika Westerberg2019-12-181-1/+1
| | | | | | | | | | | | | | Since the driver now supports USB4 which is the standard going forward, update the Kconfig entry to mention this and rename the entry from CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the correct option if they want to enable USB4. Also do the same for Thunderbolt network driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'staging-5.4-rc1' of ↵Linus Torvalds2019-09-181-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big staging/iio driver update for 5.4-rc1. Lots of churn here, with a few driver/filesystems moving out of staging finally: - erofs moved out of staging - greybus core code moved out of staging Along with that, a new filesytem has been added: - extfat to provide support for those devices requiring that filesystem (i.e. transfer devices to/from windows systems or printers) Other than that, there a number of new IIO drivers, and lots and lots and lots of staging driver cleanups and minor fixes as people continue to dig into those for easy changes. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (453 commits) Staging: gasket: Use temporaries to reduce line length. Staging: octeon: Avoid several usecases of strcpy staging: vhciq_core: replace snprintf with scnprintf staging: wilc1000: avoid twice IRQ handler execution for each single interrupt staging: wilc1000: remove unused interrupt status handling code staging: fbtft: make several arrays static const, makes object smaller staging: rtl8188eu: make two arrays static const, makes object smaller staging: rtl8723bs: core: Remove Macro "IS_MAC_ADDRESS_BROADCAST" dt-bindings: anybus-controller: move to staging/ tree staging: emxx_udc: remove local TRUE/FALSE definition staging: wilc1000: look for rtc_clk clock staging: dt-bindings: wilc1000: add optional rtc_clk property staging: nvec: make use of devm_platform_ioremap_resource staging: exfat: drop unused function parameter Staging: exfat: Avoid use of strcpy staging: exfat: use integer constants staging: exfat: cleanup spacing for casts staging: exfat: cleanup spacing for operators staging: rtl8723bs: hal: remove redundant variable n staging: pi433: Fix typo in documentation ...
| * staging: greybus: move the greybus core to drivers/greybusGreg Kroah-Hartman2019-08-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Greybus core code has been stable for a long time, and has been shipping for many years in millions of phones. With the advent of a recent Google Summer of Code project, and a number of new devices in the works from various companies, it is time to get the core greybus code out of staging as it really is going to be with us for a while. Cc: Johan Hovold <johan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: greybus-dev@lists.linaro.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alex Elder <elder@kernel.org> Link: https://lore.kernel.org/r/20190825055429.18547-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds2019-09-181-1/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
| * | USB: Move wusbcore and UWB to staging as it is obsoleteGreg Kroah-Hartman2019-08-081-1/+0
| |/ | | | | | | | | | | | | | | | | The UWB and wusbcore code is long obsolete, so let us just move the code out of the real part of the kernel and into the drivers/staging/ location with plans to remove it entirely in a few releases. Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / drivers: remove the SGI SN2 IOC3 base supportChristoph Hellwig2019-08-161-1/+0
|/ | | | | | | | | | | The IOC3 is a multi-function chip seen on SGI SN2 and some SGI MIPS systems. This removes the last bit of SN2 specific support, while the bits used by the mips ports are still around (and being substantially rewritten at the moment). Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lkml.kernel.org/r/20190813072514.23299-14-hch@lst.de Signed-off-by: Tony Luck <tony.luck@intel.com>
* fmc: Delete the FMC subsystemLinus Walleij2019-06-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | The FMC subsystem was created in 2012 with the ambition to drive development of drivers for this hardware upstream. The current implementation has architectural flaws and would need to be revamped using real hardware to something that can reuse existing kernel abstractions in the subsystems for e.g. I2C, FPGA and GPIO. We have concluded that for the mainline kernel it will be better to delete the subsystem and start over with a clean slate when/if an active maintainer steps up. For details see: https://lkml.org/lkml/2018/10/29/534 Suggested-by: Federico Vaga <federico.vaga@cern.ch> Cc: Pat Riehecky <riehecky@fnal.gov> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* counter: Introduce the Generic Counter interfaceWilliam Breathitt Gray2019-04-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the Generic Counter interface for supporting counter devices. In the context of the Generic Counter interface, a counter is defined as a device that reports one or more "counts" based on the state changes of one or more "signals" as evaluated by a defined "count function." Driver callbacks should be provided to communicate with the device: to read and write various Signals and Counts, and to set and get the "action mode" and "count function" for various Synapses and Counts respectively. To support a counter device, a driver must first allocate the available Counter Signals via counter_signal structures. These Signals should be stored as an array and set to the signals array member of an allocated counter_device structure before the Counter is registered to the system. Counter Counts may be allocated via counter_count structures, and respective Counter Signal associations (Synapses) made via counter_synapse structures. Associated counter_synapse structures are stored as an array and set to the the synapses array member of the respective counter_count structure. These counter_count structures are set to the counts array member of an allocated counter_device structure before the Counter is registered to the system. A counter device is registered to the system by passing the respective initialized counter_device structure to the counter_register function; similarly, the counter_unregister function unregisters the respective Counter. The devm_counter_register and devm_counter_unregister functions serve as device memory-managed versions of the counter_register and counter_unregister functions respectively. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'iommu-updates-v5.1' of ↵Linus Torvalds2019-03-101-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - A big cleanup and optimization patch-set for the Tegra GART driver - Documentation updates and fixes for the IOMMU-API - Support for page request in Intel VT-d scalable mode - Intel VT-d dma_[un]map_resource() support - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel VT-d to align with the latest version of the ATS spec - Relaxed IRQ source checking in the Intel VT-d driver for some aliased devices, needed for future devices which send IRQ messages from more than on request-ID - IRQ remapping driver for Hyper-V - Patches to make generic IOVA and IO-Page-Table code usable outside of the IOMMU code - Various other small fixes and cleanups * tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Get domain ID before clear pasid entry iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm() iommu/vt-d: Set context field after value initialized iommu/vt-d: Disable ATS support on untrusted devices iommu/mediatek: Fix semicolon code style issue MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope iommu/hyper-v: Add Hyper-V stub IOMMU driver x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available PCI/ATS: Add inline to pci_prg_resp_pasid_required() iommu/vt-d: Check identity map for hot-added devices iommu: Fix IOMMU debugfs fallout iommu: Document iommu_ops.is_attach_deferred() iommu: Document iommu_ops.iotlb_sync_map() iommu/vt-d: Enable ATS only if the device uses page aligned address. PCI/ATS: Add pci_ats_page_aligned() interface iommu/vt-d: Fix PRI/PASID dependency issue. PCI/ATS: Add pci_prg_resp_pasid_required() interface. iommu/vt-d: Allow interrupts from the entire bus for aliased devices iommu/vt-d: Add helper to set an IRTE to verify only the bus number iommu: Fix flush_tlb_all typo ...
| * iommu/iova: Allow compiling the library without IOMMU supportSakari Ailus2019-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers such as the Intel IPU3 ImgU driver use the IOVA library to manage the device's own virtual address space while not implementing the IOMMU API. Currently the IOVA library is only compiled if the IOMMU support is enabled, resulting into a failure during linking due to missing symbols. Fix this by defining IOVA library Kconfig bits independently of IOMMU support configuration, and descending to the iommu directory unconditionally during the build. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* | interconnect: Add generic on-chip interconnect APIGeorgi Djakov2019-01-221-0/+1
|/ | | | | | | | | | | | | | | | | | | | This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i3c: Add core I3C infrastructureBoris Brezillon2018-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add core infrastructure to support I3C in Linux and document it. This infrastructure adds basic I3C support. Advanced features will be added afterwards. There are a few design choices that are worth mentioning because they impact the way I3C device drivers can interact with their devices: - all functions used to send I3C/I2C frames must be called in non-atomic context. Mainly done this way to ease implementation, but this is not set in stone, and if anyone needs async support, new functions can be added later on. - the bus element is a separate object, but it's tightly coupled with the master object. We thus have a 1:1 relationship between i3c_bus and i3c_master_controller objects, and if 2 master controllers are connected to the same bus and both exposed to the same Linux instance they will appear as two distinct busses, and devices on this bus will be exposed twice. - I2C backward compatibility has been designed to be transparent to I2C drivers and the I2C subsystem. The I3C master just registers an I2C adapter which creates a new I2C bus. I'd say that, from a representation PoV it's not ideal because what should appear as a single I3C bus exposing I3C and I2C devices here appears as 2 different buses connected to each other through the parenting (the I3C master is the parent of the I2C and I3C busses). On the other hand, I don't see a better solution if we want something that is not invasive. Missing features: - I3C HDR modes are not supported - no support for multi-master and the associated concepts (mastership handover, support for secondary masters, ...) - I2C devices can only be described using DT because this is the only use case I have. However, the framework can easily be extended with ACPI and board info support - I3C slave framework. This has been completely omitted, but shouldn't have a huge impact on the I3C framework because I3C slaves don't see the whole bus, it's only about handling master requests and generating IBIs. Some of the struct, constant and enum definitions could be shared, but most of the I3C slave framework logic will be different Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds2018-08-181-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
| * gnss: add GNSS receiver subsystemJohan Hovold2018-06-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new subsystem for GNSS (e.g. GPS) receivers. While GNSS receivers are typically accessed using a UART interface they often also support other I/O interfaces such as I2C, SPI and USB, while yet other devices use iomem or even some form of remote-processor messaging (rpmsg). The new GNSS subsystem abstracts the underlying interface and provides a new "gnss" class type, which exposes a character-device interface (e.g. /dev/gnss0) to user space. This allows GNSS receivers to have a representation in the Linux device model, something which is important not least for power management purposes. Note that the character-device interface provides raw access to whatever protocol the receiver is (currently) using, such as NMEA 0183, UBX or SiRF Binary. These protocols are expected to be continued to be handled by user space for the time being, even if some hybrid solutions are also conceivable (e.g. to have kernel drivers issue management commands). This will still allow for better platform integration by allowing GNSS devices and their resources (e.g. regulators and enable-gpios) to be described by firmware and managed by kernel drivers rather than platform-specific scripts and services. While the current interface is kept minimal, it could be extended using IOCTLs, sysfs or uevents as needs and proper abstraction levels are identified and determined (e.g. for device and feature identification). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | scsi: build scsi_common.o for all scsi passthrough request usersChristoph Hellwig2018-08-021-1/+1
|/ | | | | | | | | Split scsi_common.o out of SCSI so that non-SCSI users can pull it in easily for future sense buffer helper usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds2018-02-061-4/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
| * PCI: Regroup all PCI related entries into drivers/pci/MakefileCyrille Pitchen2018-01-311-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries from drivers/Makefile into drivers/pci/Makefile. Since we don't want to introduce any dependency between CONFIG_PCI and CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile. Hence all Makefiles in drivers/pci/ were updated accordingly so no file is compiled when CONFIG_PCI is not defined. Also, we add a comment to reinforce that EPC and EPF libraries must be initialized before their users. Hence built-in EPC drivers, such as those of Designware, are linked after the endpoint core libraries. Finally, we add another comment to explain why obj-y has been chosen instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* | Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds2018-02-011-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
| * | soundwire: Add SoundWire bus typeVinod Koul2017-12-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the base SoundWire bus type, bus and driver registration. along with changes to module device table for new SoundWire device type. Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | slimbus: Add SLIMbus bus typeSagar Dharia2017-12-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SLIMbus (Serial Low Power Interchip Media Bus) is a specification developed by MIPI (Mobile Industry Processor Interface) alliance. SLIMbus is a 2-wire implementation, which is used to communicate with peripheral components like audio-codec. SLIMbus uses Time-Division-Multiplexing to accommodate multiple data channels, and control channel. Control channel has messages to do device-enumeration, messages to send/receive control-data to/from SLIMbus devices, messages for port/channel management, and messages to do bandwidth allocation. The framework supports multiple instances of the bus (1 controller per bus), and multiple slave devices per controller. This patch adds support to basic silmbus core which includes support to SLIMbus type, slimbus device registeration and some basic data structures. Signed-off-by: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviwed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | siox: new driver framework for eckelmann SIOXUwe Kleine-König2017-12-191-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIOX is a bus system invented at Eckelmann AG to control their building management and refrigeration systems. Traditionally the bus was implemented on custom microcontrollers, today Linux based machines are in use, too. The topology on a SIOX bus looks as follows: ,------->--DCLK-->---------------+----------------------. ^ v v ,--------. ,----------------------. ,------ | | | ,--------------. | | | |--->--DOUT-->---|->-|shift register|->-|--->---| | | | `--------------' | | | master | | device | | device | | | ,--------------. | | | |---<--DIN---<---|-<-|shift register|-<-|---<---| | | | `--------------' | | `--------' `----------------------' `------ v ^ ^ `----------DLD-------------------+----------------------' There are two control lines (DCLK and DLD) driven from the bus master to all devices in parallel and two daisy chained data lines, one for input and one for output. DCLK is the clock to shift both chains by a single bit. On an edge of DLD the devices latch both their input and output shift registers. This patch adds a framework for this bus type. Acked-by: Gavin Schenk <g.schenk@eckelmann.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / drivers: visorbus: move driver out of stagingDavid Kershner2017-12-081-0/+1
|/ | | | | | | | | | | Move the visorbus driver out of staging (drivers/staging/unisys/visorbus) and to drivers/visorbus. Modify the configuration and makefiles so they now reference the new location. The s-Par header file visorbus.h that is referenced by all s-Par drivers, is being moved into include/linux. Signed-off-by: David Kershner <david.kershner@unisys.com> Reviewed-by: Tim Sell <timothy.sell@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: build drivers/usb/common/ when USB_SUPPORT is setRandy Dunlap2017-11-281-0/+1
| | | | | | | | | | | | | | | | | PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT is enabled so that drivers/usb/common/ is built. ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
*-. Merge branches 'pm-cpufreq-sched' and 'pm-opp'Rafael J. Wysocki2017-11-131-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-cpufreq-sched: cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq * pm-opp: PM / OPP: Add dev_pm_opp_{un}register_get_pstate_helper() PM / OPP: Support updating performance state of device's power domain PM / OPP: add missing of_node_put() for of_get_cpu_node() PM / OPP: Rename dev_pm_opp_register_put_opp_helper() PM / OPP: Add missing of_node_put(np) PM / OPP: Move error message to debug level PM / OPP: Use snprintf() to avoid kasprintf() and kfree() PM / OPP: Move the OPP directory out of power/
| | * PM / OPP: Move the OPP directory out of power/Viresh Kumar2017-10-031-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers/base/power/ directory is special and contains code related to power management core like system suspend/resume, hibernation, etc. It was fine to keep the OPP code inside it when we had just one file for it, but it is growing now and already has a directory for itself. Lets move it directly under drivers/ directory, just like cpufreq and cpuidle. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* / License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/lguest: Remove lguest supportJuergen Gross2017-08-241-1/+0
| | | | | | | | | | | | | | | | | | | | Lguest seems to be rather unused these days. It has seen only patches ensuring it still builds the last two years and its official state is "Odd Fixes". Remove it in order to be able to clean up the paravirt code. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lguest@lists.ozlabs.org Cc: rusty@rustcorp.com.au Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* mux: minimal mux subsystemPeter Rosin2017-06-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add a new minimalistic subsystem that handles multiplexer controllers. When multiplexers are used in various places in the kernel, and the same multiplexer controller can be used for several independent things, there should be one place to implement support for said multiplexer controller. A single multiplexer controller can also be used to control several parallel multiplexers, that are in turn used by different subsystems in the kernel, leading to a need to coordinate multiplexer accesses. The multiplexer subsystem handles this coordination. Thanks go out to Lars-Peter Clausen, Jonathan Cameron, Rob Herring, Wolfram Sang, Paul Gortmaker, Dan Carpenter, Colin Ian King, Greg Kroah-Hartman and last but certainly not least to Philipp Zabel for helpful comments, reviews, patches and general encouragement! Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'armsoc-tee' of ↵Linus Torvalds2017-05-101-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann: "This introduces a generic TEE framework in the kernel, to handle trusted environemtns (security coprocessor or software implementations such as OP-TEE/TrustZone). I'm sending it separately from the other arm-soc driver changes to give it a little more visibility, once the subsystem is merged, we will likely keep this in the arm₋soc drivers branch or have the maintainers submit pull requests directly, depending on the patch volume. I have reviewed earlier versions in the past, and have reviewed the latest version in person during Linaro Connect BUD17. Here is my overall assessment of the subsystem: - There is clearly demand for this, both for the generic infrastructure and the specific OP-TEE implementation. - The code has gone through a large number of reviews, and the review comments have all been addressed, but the reviews were not coming up with serious issues any more and nobody volunteered to vouch for the quality. - The user space ioctl interface is sufficient to work with the OP-TEE driver, and it should in principle work with other TEE implementations that follow the GlobalPlatform[1] standards, but it might need to be extended in minor ways depending on specific requirements of future TEE implementations - The main downside of the API to me is how the user space is tied to the TEE implementation in hardware or firmware, but uses a generic way to communicate with it. This seems to be an inherent problem with what it is trying to do, and I could not come up with any better solution than what is implemented here. For a detailed history of the patch series, see https://lkml.org/lkml/2017/3/10/1277" * tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dt: hikey: Add optee node Documentation: tee subsystem and op-tee driver tee: add OP-TEE driver tee: generic TEE subsystem dt/bindings: add bindings for optee
| * tee: generic TEE subsystemJens Wiklander2017-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial patch for generic TEE subsystem. This subsystem provides: * Registration/un-registration of TEE drivers. * Shared memory between normal world and secure world. * Ioctl interface for interaction with user space. * Sysfs implementation_id of TEE driver A TEE (Trusted Execution Environment) driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. This patch builds on other similar implementations trying to solve the same problem: * "optee_linuxdriver" by among others Jean-michel DELORME<jean-michel.delorme@st.com> and Emmanuel MICHEL <emmanuel.michel@st.com> * "Generic TrustZone Driver" by Javier González <javier@javigon.com> Acked-by: Andreas Dannenberg <dannenberg@ti.com> Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey) Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3) Tested-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
* | Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds2017-05-091-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
| * | PCI: endpoint: Add EP core layer to enable EP controller and EP functionsKishon Vijay Abraham I2017-04-111-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | Introduce a new EP core layer in order to support endpoint functions in linux kernel. This comprises the EPC library (Endpoint Controller Library) and EPF library (Endpoint Function Library). EPC library implements functions specific to an endpoint controller and EPF library implements functions specific to an endpoint function. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 18:44:50 +0100