| Commit message (Collapse) | Author | Files | Lines |
|---|
|
For files, there's nr_user_files/file_table/file_data, and buffers have
nr_user_bufs/user_bufs/buf_data. There's no reason why file_table and
file_data can't be the same thing, and ditto for the buffer side. That
gets rid of more io_ring_ctx state that's in two spots rather than just
being in one spot, as it should be. Put all the registered file data in
one locations, and ditto on the buffer front.
This also avoids having both io_rsrc_data->nodes being an allocated
array, and ->user_bufs[] or ->file_table.nodes. There's no reason to
have this information duplicated. Keep it in one spot, io_rsrc_data,
along with how many resources are available.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the empty node initializing to the preinit part of the io_kiocb
allocation, and reset them if they have been used.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than allocate an io_rsrc_node for an empty/sparse buffer entry,
add a const entry that can be used for that. This just needs checking
for writing the tag, and the put check needs to check for that sparse
node rather than NULL for validity.
This avoids allocating rsrc nodes for sparse buffer entries.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not going to be needed in the fast path going forward, so kill it
off.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Work in progress, but get rid of the per-ring serialization of resource
nodes, like registered buffers and files. Main issue here is that one
node can otherwise hold up a bunch of other nodes from getting freed,
which is especially a problem for file resource nodes and networked
workloads where some descriptors may not see activity in a long time.
As an example, instantiate an io_uring ring fd and create a sparse
registered file table. Even 2 will do. Then create a socket and register
it as fixed file 0, F0. The number of open files in the app is now 5,
with 0/1/2 being the usual stdin/out/err, 3 being the ring fd, and 4
being the socket. Register this socket (eg "the listener") in slot 0 of
the registered file table. Now add an operation on the socket that uses
slot 0. Finally, loop N times, where each loop creates a new socket,
registers said socket as a file, then unregisters the socket, and
finally closes the socket. This is roughly similar to what a basic
accept loop would look like.
At the end of this loop, it's not unreasonable to expect that there
would still be 5 open files. Each socket created and registered in the
loop is also unregistered and closed. But since the listener socket
registered first still has references to its resource node due to still
being active, each subsequent socket unregistration is stuck behind it
for reclaim. Hence 5 + N files are still open at that point, where N is
awaiting the final put held up by the listener socket.
Rewrite the io_rsrc_node handling to NOT rely on serialization. Struct
io_kiocb now gets explicit resource nodes assigned, with each holding a
reference to the parent node. A parent node is either of type FILE or
BUFFER, which are the two types of nodes that exist. A request can have
two nodes assigned, if it's using both registered files and buffers.
Since request issue and task_work completion is both under the ring
private lock, no atomics are needed to handle these references. It's a
simple unlocked inc/dec. As before, the registered buffer or file table
each hold a reference as well to the registered nodes. Final put of the
node will remove the node and free the underlying resource, eg unmap the
buffer or put the file.
Outside of removing the stall in resource reclaim described above, it
has the following advantages:
1) It's a lot simpler than the previous scheme, and easier to follow.
No need to specific quiesce handling anymore.
2) There are no resource node allocations in the fast path, all of that
happens at resource registration time.
3) The structs related to resource handling can all get simplified
quite a bit, like io_rsrc_node and io_rsrc_data. io_rsrc_put can
go away completely.
4) Handling of resource tags is much simpler, and doesn't require
persistent storage as it can simply get assigned up front at
registration time. Just copy them in one-by-one at registration time
and assign to the resource node.
The only real downside is that a request is now explicitly limited to
pinning 2 resources, one file and one buffer, where before just
assigning a resource node to a request would pin all of them. The upside
is that it's easier to follow now, as an individual resource is
explicitly referenced and assigned to the request.
With this in place, the above mentioned example will be using exactly 5
files at the end of the loop, not N.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's only used from __io_req_set_rsrc_node(), and it takes both the ctx
and node itself, while never using the ctx. Just open-code the basic
refs++ in __io_req_set_rsrc_node() instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for not pinning the whole registered file table, open
code the second potential direct file assignment. This will be handled
by appropriate helpers in the future, for now just do it manually.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Doesn't matter right now as there's still some bytes left for it, but
let's prepare for the io_kiocb potentially growing and add a specific
freeptr offset for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There's no need for this internal structure to be visible, move it to
the private rsrc.h header instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Useful for testing performance/efficiency impact of registered files
and buffers, vs (particularly) non-registered files.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Generally applications have 1 or a few waits of waiting, yet they pass
in a struct io_uring_getevents_arg every time. This needs to get copied
and, in turn, the timeout value needs to get copied.
Rather than do this for every invocation, allow the application to
register a fixed set of wait regions that can simply be indexed when
asking the kernel to wait on events.
At ring setup time, the application can register a number of these wait
regions and initialize region/index 0 upfront:
struct io_uring_reg_wait *reg;
reg = io_uring_setup_reg_wait(ring, nr_regions, &ret);
/* set timeout and mark as set, sigmask/sigmask_sz as needed */
reg->ts.tv_sec = 0;
reg->ts.tv_nsec = 100000;
reg->flags = IORING_REG_WAIT_TS;
where nr_regions >= 1 && nr_regions <= PAGE_SIZE / sizeof(*reg). The
above initializes index 0, but 63 other regions can be initialized,
if needed. Now, instead of doing:
struct __kernel_timespec timeout = { .tv_nsec = 100000, };
io_uring_submit_and_wait_timeout(ring, &cqe, nr, &t, NULL);
to wait for events for each submit_and_wait, or just wait, operation, it
can just reference the above region at offset 0 and do:
io_uring_submit_and_wait_reg(ring, &cqe, nr, 0);
to achieve the same goal of waiting 100usec without needing to copy
both struct io_uring_getevents_arg (24b) and struct __kernel_timeout
(16b) for each invocation. Struct io_uring_reg_wait looks as follows:
struct io_uring_reg_wait {
struct __kernel_timespec ts;
__u32 min_wait_usec;
__u32 flags;
__u64 sigmask;
__u32 sigmask_sz;
__u32 pad[3];
__u64 pad2[2];
};
embedding the timeout itself in the region, rather than passing it as
a pointer as well. Note that the signal mask is still passed as a
pointer, both for compatability reasons, but also because there doesn't
seem to be a lot of high frequency waits scenarios that involve setting
and resetting the signal mask for each wait.
The application is free to modify any region before a wait call, or it
can use keep multiple regions with different settings to avoid needing to
modify the same one for wait calls. Up to a page size of regions is mapped
by default, allowing PAGE_SIZE / 64 available regions for use.
The registered region must fit within a page. On a 4kb page size system,
that allows for 64 wait regions if a full page is used, as the size of
struct io_uring_reg_wait is 64b. The region registered must be aligned
to io_uring_reg_wait in size. It's valid to register less than 64
entries.
In network performance testing with zero-copy, this reduced the time
spent waiting on the TX side from 3.12% to 0.3% and the RX side from 4.4%
to 0.3%.
Wait regions are fixed for the lifetime of the ring - once registered,
they are persistent until the ring is torn down. The regions support
minimum wait timeout as well as the regular waits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In scenarios where a high frequency of wait events are seen, the copy
of the struct io_uring_getevents_arg is quite noticeable in the
profiles in terms of time spent. It can be seen as up to 3.5-4.5%.
Rewrite the copy-in logic, saving about 0.5% of the time.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This avoids intermediate storage for turning a __kernel_timespec
user pointer into an on-stack struct timespec64, only then to turn it
into a ktime_t.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_sqd_handle_event() just does a mutex unlock/lock dance when it's
supposed to park, somewhat relying on full ordering with the thread
trying to park it which does a similar unlock/lock dance on sqd->lock.
However, with adaptive spinning on mutexes, this can waste an awful
lot of time. Normally this isn't very noticeable, as parking and
unparking the thread isn't a common (or fast path) occurence. However,
in testing ring resizing, it's testing exactly that, as each resize
will require the SQPOLL to safely park and unpark.
Have io_sq_thread_park() explicitly wait on sqd->park_pending being
zero before attempting to grab the sqd->lock again.
In a resize test, this brings the runtime of SQPOLL down from about
60 seconds to a few seconds, just like the !SQPOLL tests. And saves
a ton of spinning time on the mutex, on both sides.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Once a ring has been created, the size of the CQ and SQ rings are fixed.
Usually this isn't a problem on the SQ ring side, as it merely controls
the available number of requests that can be submitted in a single
system call, and there's rarely a need to change that.
For the CQ ring, it's a different story. For most efficient use of
io_uring, it's important that the CQ ring never overflows. This means
that applications must size it for the worst case scenario, which can
be wasteful.
Add IORING_REGISTER_RESIZE_RINGS, which allows an application to resize
the existing rings. It takes a struct io_uring_params argument, the same
one which is used to setup the ring initially, and resizes rings
according to the sizes given.
Certain properties are always inherited from the original ring setup,
like SQE128/CQE32 and other setup options. The implementation only
allows flag associated with how the CQ ring is sized and clamped.
Existing unconsumed SQE and CQE entries are copied as part of the
process. If either the SQ or CQ resized destination ring cannot hold the
entries already present in the source rings, then the operation is failed
with -EOVERFLOW. Any register op holds ->uring_lock, which prevents new
submissions, and the internal mapping holds the completion lock as well
across moving CQ ring state.
To prevent races between mmap and ring resizing, add a mutex that's
solely used to serialize ring resize and mmap. mmap_sem can't be used
here, as as fork'ed process may be doing mmaps on the ring as well.
The ctx->resize_lock is held across mmap operations, and the resize
will grab it before swapping out the already mapped new data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The later mapping will actually check this too, but in terms of code
clarify, explicitly check for whether or not the rings and sqes are
valid during validation. That makes it explicit that if they are
non-NULL, they are valid and can get mapped.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Abstract out a io_uring_fill_params() helper, which fills out the
necessary bits of struct io_uring_params. Add it to io_uring.h as well,
in preparation for having another internal user of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for needing this somewhere else, move the definitions
for the maximum CQ and SQ ring size into io_uring.h. Make the
rings_size() helper available as well, and have it take just the setup
flags argument rather than the fill ring pointer. That's all that is
needed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Put sr->umsg into a local variable, so it doesn't repeat "sr->umsg->"
for every field. It looks nicer, and likely without the patch it
compiles into a bunch of umsg memory reads.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/26c2f30b491ea7998bfdb5bb290662572a61064d.1729607201.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We keep user pointers in an union, which could be a user buffer or a
user pointer to msghdr. What is confusing is that it potenitally reads
and assigns sqe->addr as one type but then uses it as another via the
union. Even more, it's not even consistent across copy and zerocopy
versions.
Make send and sendmsg setup helpers read sqe->addr and treat it as the
right type from the beginning. The end goal would be to get rid of
the use of struct io_sr_msg::umsg for send requests as we only need it
at the prep side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/685d788605f5d78af18802fcabf61ba65cfd8002.1729607201.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For non "msg" requests we copy the address at the prep stage and there
is no need to store the address user pointer long term. Pass the SQE
into io_send_setup(), let it parse it, and remove struct io_sr_msg addr
addr_len fields. It saves some space and also less confusing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/db3dce544e17ca9d4b17d2506fbbac1da8a87824.1729607201.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A preparation patch splitting io_sendmsg_prep_setup into two separate
helpers for send and sendmsg variants.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1a2319471ba040e053b7f1d22f4af510d1118eca.1729607201.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's no longer being used, remove it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Let's keep it close with the actual import, there's no reason to do this
on the prep side. With that, we can drop one of the branches checking
for whether or not IORING_RECVSEND_FIXED_BUF is set.
As a side-effect, get rid of req->imu usage.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers already hold the ring lock and hence are passing '0',
remove the argument and the conditional locking that it controlled.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's assigned in the same function that it's being used, get rid of
it. A local variable will do just fine.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's pretty pointless to use io_kiocb as intermediate storage for this,
so split the validity check and the actual usage. The resource node is
assigned upfront at prep time, to prevent it from going away. The actual
import is never called with the ctx->uring_lock held, so grab it for
the import.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iter->bvec is already set to imu->bvec - remove the one dead assignment
and turn the other one into an addition instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have too many helpers posting CQEs, instead of tracing completion
events before filling in a CQE and thus having to pass all the data,
set the CQE first, pass it to the tracing helper and let it extract
everything it needs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b83c1ca9ee5aed2df0f3bb743bf5ed699cce4c86.1729267437.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_SETUP_NO_SQARRAY should be preferred and used by default by
liburing, optimise flag checking in io_get_sqe() with a static key.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c164a48542fbb080115e2377ecf160c758562742.1729264988.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_llist_xchg is only used to set the list to NULL, which can also be
done with llist_del_all(). Use the latter and kill io_llist_xchg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d6765112680d2e86a58b76166b7513391ff4e5d7.1729264960.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to using kvmalloc/kfree() for the hash tables, and while at it,
make it handle low memory situations better.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All it does is initialize the lists, just move the INIT_HLIST_HEAD()
into the one caller.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Any access to the table is protected by ctx->uring_lock now anyway, the
per-bucket locking doesn't buy us anything.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It serves no purposes anymore, all it does is delete the hash list
entry. task_work always has the ring locked.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring maintains two hash lists of inflight requests:
1) ctx->cancel_table_locked. This is used when the caller has the
ctx->uring_lock held already. This is only an issue side parameter,
as removal or task_work will always have it held.
2) ctx->cancel_table. This is used when the issuer does NOT have the
ctx->uring_lock held, and relies on the table spinlocks for access.
However, it's pretty trivial to simply grab the lock in the one spot
where we care about it, for insertion. With that, we can kill the
unlocked table (and get rid of the _locked postfix for the other one).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's always req->ctx being used anyway, having this as a separate
argument (that is then not even used) just makes it more confusing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Normally MSG_RING requires both a source and a destination ring. But
some users don't always have a ring avilable to send a message from, yet
they still need to notify a target ring.
Add support for using io_uring_register(2) without having a source ring,
using a file descriptor of -1 for that. Internally those are called
blind registration opcodes. Implement IORING_REGISTER_SEND_MSG_RING as a
blind opcode, which simply takes an sqe that the application can put on
the stack and use the normal liburing helpers to initialize it. Then the
app can call:
io_uring_register(-1, IORING_REGISTER_SEND_MSG_RING, &sqe, 1);
and get the same behavior in terms of the target, where a CQE is posted
with the details given in the sqe.
For now this takes a single sqe pointer argument, and hence arg must
be set to that, and nr_args must be 1. Could easily be extended to take
an array of sqes, but for now let's keep it simple.
Link: https://lore.kernel.org/r/20240924115932.116167-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mostly just to skip them taking an io_kiocb, rather just pass in the
ctx and io_msg directly.
In preparation for being able to issue a MSG_RING request without
having an io_kiocb. No functional changes in this patch.
Link: https://lore.kernel.org/r/20240924115932.116167-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Everything else about the io_uring eventfd support is nicely kept
private to that code, except the cached_cq_tail tracking. With
everything else in place, move io_eventfd_flush_signal() to using
the ev_fd grab+release helpers, which then enables the direct use of
io_ev_fd for this tracking too.
Link: https://lore.kernel.org/r/20240921080307.185186-7-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for needing the ev_fd grabbing (and releasing) from
another path, abstract out two helpers for that.
Link: https://lore.kernel.org/r/20240921080307.185186-6-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's a bit hard to read what guards the triggering, move it into a
helper and add a comment explaining it too. This additionally moves
the ev_fd == NULL check in there as well.
Link: https://lore.kernel.org/r/20240921080307.185186-5-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for using this from multiple spots, move the signaling
into a helper.
Link: https://lore.kernel.org/r/20240921080307.185186-4-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not necessary to do this post grabbing a reference. With that, we
can drop the out goto path as well.
Link: https://lore.kernel.org/r/20240921080307.185186-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We call this in two spot, have a helper for it. In preparation for
extending this part.
Link: https://lore.kernel.org/r/20240921080307.185186-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
A previous commit improved how !FMODE_NOWAIT is dealt with, but
inadvertently negated a check whilst doing so. This caused -EAGAIN to be
returned from reading files with O_NONBLOCK set. Fix up the check for
REQ_F_SUPPORT_NOWAIT.
Reported-by: Julian Orth <ju.orth@gmail.com>
Link: https://github.com/axboe/liburing/issues/1270
Fixes: f7c913438533 ("io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ret_stack_list is an array of ret_stack shadow stacks for the function
graph usage. When the first function graph is enabled, all tasks in the
system get a shadow stack. The ret_stack_list is a 32 element array of
pointers to these shadow stacks. It allocates the shadow stack in batches
(32 stacks at a time), assigns them to running tasks, and continues until
all tasks are covered.
When the function graph shadow stack changed from an array of
ftrace_ret_stack structures to an array of longs, the allocation of
ret_stack_list went from allocating an array of 32 elements to just a
block defined by SHADOW_STACK_SIZE. Luckily, that's defined as PAGE_SIZE
and is much more than enough to hold 32 pointers. But it is way overkill
for the amount needed to allocate.
Change the allocation of ret_stack_list back to a kcalloc() of
FTRACE_RETSTACK_ALLOC_SIZE pointers.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241018215212.23f13f40@rorschach
Fixes: 42675b723b484 ("function_graph: Convert ret_stack to a series of longs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph infrastructure allocates a shadow stack for every task
when enabled. This includes the idle tasks. The first time the function
graph is invoked, the shadow stacks are created and never freed until the
task exits. This includes the idle tasks.
Only the idle tasks that were for online CPUs had their shadow stacks
created when function graph tracing started. If function graph tracing is
enabled and a CPU comes online, the idle task representing that CPU will
not have its shadow stack created, and all function graph tracing for that
idle task will be silently dropped.
Instead, use the CPU hotplug mechanism to allocate the idle shadow stacks.
This will include idle tasks for CPUs that come online during tracing.
This issue can be reproduced by:
# cd /sys/kernel/tracing
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > set_ftrace_pid
# echo function_graph > current_tracer
# echo 1 > options/funcgraph-proc
# echo 1 > /sys/devices/system/cpu/cpu1
# grep '<idle>' per_cpu/cpu1/trace | head
Before, nothing would show up.
After:
1) <idle>-0 | 0.811 us | __enqueue_entity();
1) <idle>-0 | 5.626 us | } /* enqueue_entity */
1) <idle>-0 | | dl_server_update_idle_time() {
1) <idle>-0 | | dl_scaled_delta_exec() {
1) <idle>-0 | 0.450 us | arch_scale_cpu_capacity();
1) <idle>-0 | 1.242 us | }
1) <idle>-0 | 1.908 us | }
1) <idle>-0 | | dl_server_start() {
1) <idle>-0 | | enqueue_dl_entity() {
1) <idle>-0 | | task_contending() {
Note, if tracing stops and restarts, the old way would then initialize
the onlined CPUs.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20241018214300.6df82178@rorschach
Fixes: 868baf07b1a25 ("ftrace: Fix memory leak with function graph and cpu hotplug")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When initially adding the touchkey support, a mistake was made in the
property parsing code. The possible negative errno from
device_property_count_u32() was never checked, which was an oversight
left from converting to it from the of_property as part of the review
fixes.
Re-add the correct handling of the absent property, in which case zero
touchkeys should be assumed, which would disable the feature.
Reported-by: Jakob Hauser <jahau@rocketmail.com>
Tested-by: Jakob Hauser <jahau@rocketmail.com>
Fixes: 075d9b22c8fe ("Input: zinitix - add touchkey support")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20241004-zinitix-no-keycodes-v2-1-876dc9fea4b6@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
