summaryrefslogtreecommitdiffstats
path: root/drivers/ata (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers/ata: trim trailing whitespaceJeff Garzik2008-05-192-5/+5
| | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Fixups to ATA ACPI hotplugMatthew Garrett2008-05-191-27/+50
| | | | | | | | | | | | | | | | | The libata-acpi.c code currently accepts hotplug messages from both the port and the device. This does not match the behaviour of the bay driver, and may result in confusion when two hotplug requests are received for the same device. This patch limits the hotplug notification to removable ACPI devices, which in turn allows it to use the _STA method to determine whether the device has been removed or inserted. On removal, devices are marked as detached. On insertion, a hotplug scan is started. This should avoid lockups caused by the ata layer attempting to scan devices which have been removed. The uevent sending is moved outside the spinlock in order to avoid a warning generated by it firing when interrupts are disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: ignore SIMG4726 config pseudo deviceTejun Heo2008-05-192-8/+8
| | | | | | | | | | | | I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it happy but no even this doesn't work under certain configurations and it's not like we can do anything useful with the cofig device anyway. Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for the config device. This makes the device completely ignored by libata. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sil24: don't use NCQ if marvell 4140 PMP is attachedTejun Heo2008-05-191-0/+11
| | | | | | | | | | | | | | When 4140 PMP is attached to sil24, NCQ commands to fan out port 1 and 2 (0 based) often stall if commands are in progress to other ports. I've tried a number of things but can't tell what's going on. It never happens w/ ahci and reportedly sata_mv which can issue NCQ commands to multiple devices simultaneously like sil24 does. Disable NCQ for devices behind 4140 PMP for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: don't schedule LPM action seperately during probingTejun Heo2008-05-191-2/+1
| | | | | | | | | There's no reason to schedule LPM action after probing is complete causing another EH iteration. Just schedule it together with probing itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: make sure PMP notification is turned off during recoveryTejun Heo2008-05-191-16/+20
| | | | | | | | | | | | | PMP notification during reset can make some controllers fail reset processing and needs to be turned off during resets. PMP attach and full-revalidation path did this via sata_pmp_configure() but the quick revalidation wasn't. Move the notification disable code right above fan-out port recovery so that it's always turned off. This fixes obscure reset failures. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: increase PMP register access timeout to 3sTejun Heo2008-05-191-2/+2
| | | | | | | | | | | | | | | | This timeout was set low because previously PMP register access was done via polling and register access timeouts could stack up. This is no longer the case. One timeout will make all following accesses fail immediately. In rare cases both marvell and SIMG PMPs need almost a second. Bump it to 3s. While at it, rename it to SATA_PMP_RW_TIMEOUT. It's not specific to SCR access. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: ignore recovered PHY errorsTejun Heo2008-05-191-6/+1
| | | | | | | | | | | | | | | No reason to get overzealous about recovered comm and data errors. Some PHYs habitually sets them w/o no good reason and being draconian about these soft error conditions doesn't seem to help anybody. If need ever rises, we might need to add soft PHY error condition, say AC_ERR_MAYBE_ATA_BUS and use it only to determine whether speed down is necessary but I don't think that's very likely to happen. It's far more likely we'll get timeouts or fatal transmission errors if recovered errors are so prominent that they hamper operation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: kill hotplug related race conditionTejun Heo2008-05-192-23/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, whole reset processing was done while the port is frozen and SError was cleared during @postreset(). This had two race conditions. 1: hotplug could occur after reset but before SError is cleared and libata won't know about it. 2: hotplug could occur after all the reset is complete but before the port is thawed. As all events are cleared on thaw, the hotplug event would be lost. Commit ac371987a81c61c2efbd6931245cdcaf43baad89 kills the first race by clearing SError during link resume but before link onlineness test. However, this doesn't fix race #2 and in some cases clearing SError after SRST is a good idea. This patch solves this problem by cross checking link onlineness with classification result after SError is cleared and port is thawed. Reset is retried if link is online but all devices attached to the link are unknown. As all devices will be revalidated, this one-way check is enough to ensure that all devices are detected and revalidated reliably. This, luckily, also fixes the cases where host controller returns bogus status while harddrive is spinning up after hotplug making classification run before the device sends the first FIS and thus causes misdetection. Low level drivers can bypass the logic by setting class explicitly to ATA_DEV_NONE if ever necessary (currently none requires this). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: move reset freeze/thaw handling into ata_eh_reset()Tejun Heo2008-05-192-32/+18
| | | | | | | | | | | | | | | | | Previously reset freeze/thaw handling lived outside of ata_eh_reset() mainly because the original PMP reset code needed the port frozen while resetting all the fan-out ports, which is no longer the case. This patch moves freeze/thaw handling into ata_eh_reset(). @prereset() and @postreset() are now called w/o freezing the port although @prereset() an be called frozen if the port is frozen prior to entering ata_eh_reset(). This makes code simpler and will help removing hotplug event related races. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: reorganize ata_eh_reset() no reset method pathTejun Heo2008-05-191-50/+52
| | | | | | | | | | Reorganize ata_eh_reset() such that @prereset() is called even when no reset method is available and if block is used instead of goto to skip actual reset. This makes no reset case behave better (readiness wait) and future changes easier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix sata_link_hardreset() @online out parameter handlingTejun Heo2008-05-191-1/+5
| | | | | | | | | | The @online out parameter is supposed to set to true iff link is online and reset succeeded as advertised in the function description and callers are coded expecting that. However, sata_link_reset() didn't behave this way on device readiness test failure. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_promise: other cleanupsMikael Pettersson2008-05-191-16/+7
| | | | | | | | | | | | | | | | Minor coding-style fixes for sata_promise: - remove stray blank lines - fix checkpatch.pl errors; warnings about long lines remain, but I don't intend to address those at this time - remove two inline directives: neither is essential and both functions are trivially inlinable anyway by virtue of being static and having a single unique call site - fix comment in pdc_interrupt(): the bits in PDC_INT_SEQMASK denote SEQIDs not tags, the distinction becomes important when NCQ gets implemented Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_promise: mmio access cleanupsMikael Pettersson2008-05-191-59/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up sata_promise's mmio accesses. In sata_promise there are three distinct mmio address spaces: 1. global registers, offsets from host->iomap[PDC_MMIO_BAR] 2. per-port ATA registers, offsets from ap->ioaddr.cmd_addr 3. per-port SATA registers, offsets from ap->ioaddr.scr_addr The driver currently often fails to indicate which address space a given mmio base pointer refers to, which is a source of bugs and confusion (see recent pdc_thaw() irq clearing bug; it's also been an obstacle for the pending NCQ extensions). To reduce these problems, adopt a coding style where the name of a base pointer always indicates which address space it refers to: 1. global registers: host_mmio 2. per-port ATA registers: ata_mmio 3. per-port SATA registers: sata_mmio Also rearrange register offset definitions to clearly indicate which address space they belong to, and add a symbolic definition for the previously hard-coded PHYMODE4 register. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_promise: fix irq clearing bugletsMikael Pettersson2008-05-191-4/+3
| | | | | | | | | | | | | | | | | This patch fixes two bugs in sata_promise's irq status clearing paths: 1. When clearing the irq status for a specific port, the driver read the global SEQMASK register. This is wrong because that clears the irq status for _all_ ports. 2. pdc_thaw() incorrectly added the PDC_INT_SEQMASK host register offset to a per-port ata engine base address. This resulted in it reading the unrelated PDC_PKT_SUBMIT register, which did not have the desired irq status clearing effect. In both cases the fix is to read from the port's Command/Status register. This also matches what Promise's own driver does. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ata: remove FIT() macroHarvey Harrison2008-05-199-64/+64
| | | | | | | | | | | | | Use the kernel-provided clamp_val() macro. FIT was always applied to a member of struct ata_timing (unsigned short) and two constants. clamp_val will not cast to short anymore. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: ensure empty request queue for FBS-NCQ EHMark Lord2008-05-191-2/+14
| | | | | | | | | | | | | Check for an empty request queue before stopping EDMA after a FBS-NCQ error, as per recommendation from the Marvell datasheet. This ensures that the EDMA won't suddenly become active again just after our subsequent check of the empty/idle bits. Also bump DRV_VERSION. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: cache main_irq_mask register in hprivMark Lord2008-05-191-5/+7
| | | | | | | | | | | | | | Part five of simplifying/fixing handling of the main_irq_mask register to resolve unexpected interrupt issues observed in 2.6.26-rc*. Keep a cached copy of the main_irq_mask so that we don't have to stall the CPU to read it on every pass through mv_interrupt. This significantly speeds up interrupt handling, both for sata_mv, and for any other driver/device sharing the same PCI IRQ line. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: disregard masked irqsMark Lord2008-05-191-4/+5
| | | | | | | | | | | Part four of simplifying/fixing handling of the main_irq_mask register to resolve unexpected interrupt issues observed in 2.6.26-rc*. Ignore masked IRQs in mv_interrupt(). This prevents "unexpected device interrupt while idle" messages. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: fix pmp drives not foundMark Lord2008-05-191-1/+4
| | | | | | | | | | | | | | | | | | Part three of simplifying/fixing handling of the main_irq_mask register to resolve unexpected interrupt issues observed in 2.6.26-rc*. Partially fix a reported bug whereby we sometimes miss seeing drives on a port-multiplier, as reported by Gwendal Grignou <gwendal@google.com>. The problem was that we were receiving unexpected interrupts during EH from POLLed commands while accessing port-multiplier registers. These unexpected interrupts can be prevented by masking the DONE_IRQ bit for the port whenever not operating in EDMA mode. Also fix port_stop() to mask all port interrupts. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: consolidate main_irq_mask updatesMark Lord2008-05-191-25/+32
| | | | | | | | | | | | | | Part two of simplifying/fixing handling of the main_irq_mask register to resolve unexpected interrupt issues observed in 2.6.26-rc*. Consolidate all updates of the host main_irq_mask register into a single function. This simplifies maintenance, and also prepares the way for caching it (later). No functionality changes in this update. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: don't blindly enable IRQsMark Lord2008-05-191-26/+6
| | | | | | | | | | | | | | Part one of simplifying/fixing handling of the main_irq_mask register to resolve unexpected interrupt issues observed in 2.6.26-rc*. Don't blindly enable port IRQs at host init time. Instead, enable only the bits that we want, which in this case is simply the PCI_ERR bit. The per-port bits can wait until the ports are reset/probed for devices. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: async notify for genIIe onlyMark Lord2008-05-191-2/+12
| | | | | | | | | | | | | Now that we handle the FIS_IRQ_CAUSE register correctly, we can also now handle SATA asynchronous notification events. So enable them, but only for the more modern GenIIe chips. (older chips have unaddressed errata issues related to this). This fixes hot plug/unplug for port-muliplier ports. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: group genIIe flagsMark Lord2008-05-191-9/+8
| | | | | | | | | | Group all of the flags for GenIIe devices into a common definition, to ensure that any updates to them are shared by all GenIIe devices. This will help make future maintenance somewhat simpler. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: fis irq register fixesMark Lord2008-05-191-4/+12
| | | | | | | | | | | | | Fix handling of the FIS_IRQ_CAUSE register in sata_mv. This register exists *only* on GenIIe devices, so don't bother writing to it on older chips. Also, it has to be read/cleared in mv_err_intr() before clearing the main ERR_IRQ_CAUSE register. This keeps sata_mv from getting stuck forever on certain error types. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: always do softresetMark Lord2008-05-191-0/+1
| | | | | | | | | Always request a softreset after hardreset succeeds. This fixes a regression reported by Martin Michlmayr <tbm@cyrius.com>. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* avr32/pata: avoid unnecessary memset (updated after comments)Christophe Jaillet2008-05-191-2/+0
| | | | | | | | | Remove an explicit memset(.., 0, ...) to a variable allocated with kzalloc (i.e. 'info'). Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata-bf54x: Set ATAPI HSM to control IDE device terminate sequence.Sonic Zhang2008-05-191-1/+4
| | | | | | | | | | | | Set ATAPI host state machine to control IDE device terminate sequence. Some IDE harddisk may assert terminate sequence in the middle of a formal DMA transaction and resume later. Bit DETECT_TERM in ATAPI_CTRL register determines whether the ATAPI host state machine or the kernel driver should take care of this case. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_atiixp: Don't disableAlan Cox2008-05-062-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | A couple of distributions (Fedora, Ubuntu) were having weird problems with the ATI IXP series PATA controllers being reported as simplex. At the heart of the problem is that both distros ignored the recommendations to load pata_acpi and ata_generic *AFTER* specific host drivers. The underlying cause however is that if you D3 and then D0 an ATI IXP it helpfully throws away some configuration and won't let you rewrite it. Add checks to ata_generic and pata_acpi to pin ATIIXP devices. Possibly the real answer here is to quirk them and pin them, but right now we can't do that before they've been pcim_enable()'d by a driver. I'm indebted to David Gero for this. His bug report not only reported the problem but identified the cause correctly and he had tested the right values to prove what was going on [If you backport this for 2.6.24 you will need to pull in the 2.6.25 removal of the bogus WARN_ON() in pcim_enagle] Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: David Gero <davidg@havidave.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: update intro comment, up the version and drop EXPERIMENTALTejun Heo2008-05-062-10/+30
| | | | | | | | sata_inic162x is now ready for production use. Bump the version, explain what's working and what's not and drop EXPERIMENTAL. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: add cardbus supportTejun Heo2008-05-061-12/+24
| | | | | | | | When attached to cardbus, mmio region is at BAR 1. Other than that, everything else is the same. Add support for it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: kill now unused SFF related stuffTejun Heo2008-05-061-51/+18
| | | | | | | | | | | | | | | | | | | | | sata_inic162x now doesn't use any SFF features. Remove all SFF related stuff. * Mask unsolicited ATA interrupts. This removes our primary source of spurious interrupts and spurious interrupt handling can be tightened up. There's no need to clear ATA interrupts by reading status register either. * Don't dance with IDMA_CTL_ATA_NIEN and simplify accesses to IDMA_CTL. * Inherit from sata_port_ops instead of ata_sff_port_ops. * Don't initialize or use ioaddr. There's no need to map BAR0-4 anymore. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: use IDMA for ATAPI commandsTejun Heo2008-05-061-34/+47
| | | | | | | | | | | | | Use IDMA for ATAPI commands. Write and some misc commands time out when executed using ATAPI_PROT_DMA but ATAPI_PROT_PIO works fine. As PIO is driven by DMA too, it doesn't make any noticeable difference for native SATA devices. inic_check_atapi_dma() is implemented to force PIO for those ATAPI commands. After this change, sata_inic162x issues all commands using IDMA. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: use IDMA for non DMA ATA commandsTejun Heo2008-05-061-34/+15
| | | | | | | | | | | | Use IDMA for PIO and non-data commands. This allows sata_inic162x to safely drive LBA48 devices. Kill inic_dev_config() which contains code to reject LBA48 devices. With this change, status checking in inic_qc_issue() to avoid hard lock up after hotplug can go away too. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: kill now unused bmdma related stuffTejun Heo2008-05-061-98/+5
| | | | | | | | | | | | | | | sata_inic162x doesn't use BMDMA anymore. Kill bmdma related stuff. * prdctl manipulation * port IRQ mask manipulation * inherit ATA_BASE_SHT instead of ATA_BMDMA_SHT * BMDMA methods Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: use IDMA for ATA_PROT_DMATejun Heo2008-05-061-35/+235
| | | | | | | | | | | | | | | | | | The modified driver on initio site has enough clue on how to use IDMA. Use IDMA for ATA_PROT_DMA. * LBA48 now works as long as it uses DMA (LBA48 devices still aren't allowed as it can destroy data if PIO is used for any reason). * No need to mask IRQs for read DMAs as IDMA_DONE is properly raised after transfer to memory is actually completed. There will be some spurious interrupts but host_intr will handle it correctly and manipulating port IRQ mask interacts badly with the other port for some reason, so command type dependent port IRQ masking is not used anymore. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: update TF read handlingTejun Heo2008-05-061-2/+45
| | | | | | | | | | | | | | | | | | | | | | | | | inic162x can't reliably read back TF or at least we don't know how to do it yet. The only values which seem reliable are status and error. This patch updates access to TF. * implement inic_tf_read() which reads the TF area in mmio area * implement custom inic_qc_fill_rtf() which only returns true if status indicates device error. it'll be returning bogus addresses for device errors but it'll be able to report why it failed at least. * implement custom inic_check_ready() and use ata_wait_after_reset() instead of the SFF version. * use inic_tf_read() for classification. This is not perfect but it fixes hotplug detection failure and at least makes the driver report 0's instead of random garbages while reporting valid status and error for device errors. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: add / update constantsTejun Heo2008-05-061-3/+56
| | | | | | | | | | | | * add a bunch of constants, most are from the datasheet, a few undocumented ones are from initio's modified driver * HCTL_PWRDWN is bit 12 not 13 This is in preparation of further inic162x updates. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_inic162x: misc clean upsTejun Heo2008-05-061-13/+5
| | | | | | | | | | | | | | | * use larger indents for structure member definitions * kill unused variable @addr in inic_scr_write() * kill unnecessary flushes in inic_freeze/thaw() * kill buggy explicit kfree() on devres managed port private data This is in preparation of further inic162x updates. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv use hweight16() for bit counting (V2)Mark Lord2008-05-061-12/+6
| | | | | | | | | | Some tidying as suggested by Grant Grundler. Nuke local bit-counting function from sata_mv in favour of using hweight16(). Also add a short explanation for the 15msec timeout used when waiting for empty/idle. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv NCQ-EH for FIS-based switchingMark Lord2008-05-061-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | Convert sata_mv's EH for FIS-based switching (FBS) over to the sequence recommended by Marvell. This enables us to catch/analyze multiple failed links on a port-multiplier when using NCQ. To do this, we clear the ERR_DEV bit in the EDMA Halt-Conditions register, so that the EDMA engine doesn't self-disable on the first NCQ error. Our EH code sets the MV_PP_FLAG_DELAYED_EH flag to prevent new commands being queued while we await completion of all outstanding NCQ commands on all links of the failed PM. The SATA Test Control register tells us which links have failed, so we must only wait for any other active links to finish up before we stop the EDMA and run the .error_handler afterward. The patch also includes skeleton code for handling of non-NCQ FBS operation. This is more for documentation purposes right now, as that mode is not yet enabled in sata_mv. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv delayed eh handlingMark Lord2008-05-061-1/+37
| | | | | | | | | | | | | | | | | | | | | | | Introduce a new "delayed error handling" mechanism in sata_mv, to enable us to eventually deal with multiple simultaneous NCQ failures on a single host link when a PM is present. This involves a port flag (MV_PP_FLAG_DELAYED_EH) to prevent new commands being queued, and a pmp bitmap to indicate which pmp links had NCQ errors. The new mv_pmp_error_handler() uses those values to invoke ata_eh_analyze_ncq_error() on each failed link, prior to freezing the port and passing control to sata_pmp_error_handler(). This is based upon a strategy suggested by Tejun. For now, we just implement the delayed mechanism. The next patch in this series will add the multiple-NCQ EH code to take advantage of it. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: export ata_eh_analyze_ncq_errorMark Lord2008-05-062-1/+2
| | | | | | | | Export ata_eh_analyze_ncq_error() for subsequent use by sata_mv, as suggested by Tejun. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv new mv_port_intr functionMark Lord2008-05-061-36/+48
| | | | | | | | | | Separate out the inner loop body of mv_host_intr() into it's own function called mv_port_intr(). This should help maintainabilty. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv fix mv_host_intr bug for hc_irq_causeMark Lord2008-05-061-29/+42
| | | | | | | | Remove the unwanted reads of hc_irq_cause from mv_host_intr(), thereby removing a bug whereby we were not always reading it when needed.. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv NCQ and SError fixes for mv_err_intrMark Lord2008-05-061-21/+43
| | | | | | | | | | | | | | | | | | Sigh. Undo some earlier changes to mv_port_intr(), so that we now read/clear SError again in all cases. Arrange the top of the function to be as close as possible to what we need for a later update (in this series) for ERR_DEV handling. Fix things so that libata-eh can attempt a READ_LOG_EXT_10H in response to a failed NCQ command, by just doing a local mv_eh_freeze() rather than ata_port_freeze(). This will now fully handle NCQ errors much of the time, but more fixes are needed for FBS/PMP, and for certain chip errata. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv rearrange mv_config_fbsMark Lord2008-05-061-21/+39
| | | | | | | | | | | Rearrange mv_config_fbs() to more closely follow the (corrected) datasheet recommendations for NCQ and FIS-based switching (FBS). Also, maintain a port flag to let us know when FBS is enabled. We will make more use of that flag later in this patch series. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv errata workaround for sata25 part 1Mark Lord2008-05-061-2/+18
| | | | | | | | | | Part 1 of workaround for errata "sata#25" for the 60x1 series (the second half of this errata workaround is still in development. Bit22 of the GPIO port has to be set "on" when in NCQ mode. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv new mv_qc_defer methodMark Lord2008-05-061-2/+41
| | | | | | | | | | | The EDMA engine cannot tolerate a mix of NCQ/non-NCQ commands, and cannot be used for PIO at all. So we need to prevent libata from trying to feed us such mixtures. Introduce mv_qc_defer() for this purpose, and use it for all chip versions. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv wait for empty+idleMark Lord2008-05-061-0/+20
| | | | | | | | | | | | | | | | When performing EH, it is recommended to wait for the EDMA engine to empty out requests-in-progress before disabling EDMA. Introduce code to poll the EDMA_STATUS register for idle/empty bits before disabling EDMA. For non-EH operation, this will normally exit without delay, other than the register read. A later series of patches may focus on eliminating this and various other register reads (when possible) throughout the driver, but for now we're focussing on solid reliablity. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 18:43:14 +0100