summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: btbcm: allow btbcm_read_verbose_config to fail on AppleChris Mason2015-07-141-6/+5
| | | | | | | | | | | | | | | | Commit 1c8ba6d013 moved around the setup code for broadcomm chips, and also added btbcm_read_verbose_config() to read extra information about the hardware. It's returning errors on some macbooks: Bluetooth: hci0: BCM: Read verbose config info failed (-16) Which makes us error out of the setup function. Since this probe isn't critical to operate the chip, this patch just changes things to carry on when it fails. Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # v4.1
* Bluetooth: ath3k: Add support of 04ca:300d AR3012 deviceDmitry Tunin2015-06-182-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/1394368 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
* Bluetooth: bt3c_cs: Fix coding style -- clean upPrasanna Karthik2015-06-181-2/+1
| | | | | | | | Fix for braces {} are not necessary for single statement blocks reported by checkpatch Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Fix speed selectionFrederic Danis2015-06-182-12/+29
| | | | | | | | | | hu->proto->*speed will always be used for all device where it is set. But hu->*speed should be used if exist, so the test should be swapped. The equivalent change is needed in bcm_setup() of hci_bcm.c. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Add new line discipline enhancementsIlya Faenson2015-06-172-6/+109
| | | | | | | | | Added the ability to flow control the UART, improved the UART baud rate setting, transferred the speeds into line discipline from the protocol and introduced the tty init function. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btbcm: Support the BCM4354 Bluetooth UART deviceIlya Faenson2015-06-172-0/+33
| | | | | | | | Support the BCM4354 chip and introduce vendor specific command parameter definitions. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add routine for applying Intel DDC parametersTedd Ho-Jeong An2015-06-171-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the routine to apply the DDC parameter from device specific ddc file. Once the device is rest to operational mode, optionally, it can download the device specific configration (DDC) parameters before the BlueZ starts the stack initialization. It opens the DDC file based on HW_VARIANT and DEV_REVISION and send ID/Value with HCI_Intel_Write_DDC command. Format of DDC file DDC file contains one or more number of DDC structure. DDC Structure It has 'Length' field of one octet, DDC 'ID' field of two octets followed by the array of DDC 'Value' that gives the value of parameters itself. 'Length' contains the length of DDC 'ID' and DDC 'Value'. +------------+----------+ | Size(byte) | Name | +------------+----------+ | 1 | Length | +------------+----------+ | 2 | ID | +------------+----------+ | Length - 2 | Value | +------------+----------+ Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Fix dereferencing of ERR_PTRChan-yeol Park2015-06-173-0/+3
| | | | | | | | | If h4_recv_buf() return ERR_PTR instead sk_buff pointer, it should be cleared once PTR_ERR is completed for the further dereference such as h4_recv(), or h4_close(). Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Add bcm_set_baudrate()Frederic Danis2015-06-092-0/+70
| | | | | | | Add vendor specific command to change controller device speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_bcsp: Clean up code FixPrasanna Karthik2015-06-091-8/+8
| | | | | | | | Fix for spaces prohibited around that '->' reported by checkpatch and space prohibited between function name and open parenthesis '(' Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Fix secure send command length alignment on Intel 8260Marcel Holtmann2015-06-091-12/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the command length alignment issue for Intel Bluetooth 8260. The length of parameters in the firmware downloading command must be multiplication of 4. If not, the command must append Intel_NOP command with extra parameters, zeros, at the end, and the firmware file is already included Intel_NOP command for alignment. This patch checks the next command and if the next command is Intel_NOP command, it reads the Intel_NOP command and send them together. For example, if the data from the firmware file looks like this: 8E FC 03 11 22 33 02 FC 03 00 00 00 Previously, btusb sends two commands: 09 FC 06 8E FC 03 11 22 33 09 FC 06 02 FC 03 00 00 00 This won't work because the length of parameters are 6 which violates the 4 byte alignment. This patch will append them together and send as one command: 09 FC 0C 8E FC 03 11 22 33 02 FC 03 00 00 00 Based on previous work from Tedd Ho-Jeong An <tedd.an@intel.com> Reported-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
* Bluetooth: btusb: Correct typo in Roper Class 1 Bluetooth DongleAleksei Volkov2015-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That patch corrects the typo in usb vendor id for Roper Class 1 Bluetooth Dongle. Problem with typo is present since 4.0 kernel. Content /sys/kernel/debug/usb/devices for these dongle: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1310 ProdID=0001 Rev=15.00 S: Manufacturer=SiW S: Product=SiW S: SerialNumber=E7BB050D0B00 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Aleksei Volkov <info@dv2c.ru> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.0.x
* Bluetooth: btusb: Remove unneeded btusb_read_local_version functionMarcel Holtmann2015-06-081-25/+13
| | | | | | | | The btusb_read_local_version function has only a single user and with that just move its functionality in place where it belongs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Remove double error check from local version commandMarcel Holtmann2015-06-081-16/+10
| | | | | | | | The __hci_cmd_sync function already handles the command status and command complete errors. No need to check the status field again. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Fix memory leak in Intel setup routineMarcel Holtmann2015-06-081-0/+2
| | | | | | | | | The SKB returned from the Intel specific version information command is missing a kfree_skb. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
* ath3k: add support of 13d3:3474 AR3012 deviceDmitry Tunin2015-06-072-0/+3
| | | | | | | | | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
* ath3k: Add support of 0489:e076 AR3012 deviceDmitry Tunin2015-06-072-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
* Bluetooth: hci_uart: Update Broadcom UART setupFrederic Danis2015-06-061-1/+29
| | | | | | | | | | Use btbcm helpers to perform controller setup. Perform host UART reset to init speed between btbcm_patchram() and btbcm_finalize(). This may be need because firmware loading may have reseted controller UART to init speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btbcm: Add helper functions for UART setupFrederic Danis2015-06-062-0/+103
| | | | | | | | | | | | | | | | | | | | Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Support operational speed during setupFrederic Danis2015-06-062-0/+30
| | | | | | | | | Add initial and operational speeds. Change to operational speed as soon as possible. If controller set_baudrate() fails, continue at initial speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btbcm: Add BCM4324B3 UART deviceFrederic Danis2015-06-061-2/+13
| | | | | | | | Add "waiting for configuration" address. Add lmp_subver and firmware name for BCM4324B3 controller. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btbcm: Move request/release_firmware()Frederic Danis2015-06-064-16/+16
| | | | | | | | | | | | Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: vhci: Clean up coding style fixPrasanna Karthik2015-06-041-1/+1
| | | | | | | Fix spaces required around that '=' reported by checkpatch. Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Merge branch 'for-upstream' of ↵David S. Miller2015-05-3110-427/+485
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-05-28 Here's a set of patches intended for 4.2. The majority of the changes are on the 802.15.4 side of things rather than Bluetooth related: - All sorts of cleanups & fixes to ieee802154 and related drivers - Rework of tx power support in ieee802154 and its drivers - Support for setting ieee802154 tx power through nl802154 - New IDs for the btusb driver - Various cleanups & smaller fixes to btusb - New btrtl driver for Realtec devices - Fix suspend/resume for Realtek devices Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * Bluetooth: btusb: fix Realtek suspend/resumeDaniel Drake2015-05-251-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Realtek btusb devices don't currently work after suspend/resume because the updated firmware is quietly lost - the USB hub doesn't notice any status change upon resume, but some kind of reset has definitely happened as the LMP subversion has reverted to its original value. Set the reset_resume flag to trigger probe and upload the new firmware again. Like the vendor code, I assume this is not needed when the device is selected as a wakeup source and hence will retain power during suspend. On the 2 products I have to hand, when trying this configuration the hardware seems unable to keep the device powered up during suspend. The USB hub then detects a status change on resume and does a reset, so we do not end up in broken state. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: hci_uart: Change 1 to true for bool type variables assignmentsShailendra Verma2015-05-251-2/+2
| | | | | | | | | | | | | | | | The variables txcrc and hciextn are bool type. So assigning true instead of 1. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btusb: Change 1 to true in bool type variable assignmentShailendra Verma2015-05-251-1/+1
| | | | | | | | | | | | | | | | The reset is a bool type variable. So assigning true to reset instead of 1. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btusb: Support QCA61x4 ROME v2.0Chan-yeol Park2015-05-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit(3267c88) missed QCA61x4 ROME v2.0 info on Samsung so its BT is not activated and the below message is shown. [ 8.009638] usb 1-1: New USB device found, idVendor=0cf3, idProduct=e300 [ 8.012637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.102901] Bluetooth: hci0: don't support firmware rome 0x200 This patch adds QCA61x4 ROME v2.0 info in qca_devices_table[], and is verified on Samsung with the firmware provided by Kim, Ben Young Tae <ytkim@qca.qualcomm.com>. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btbcm: Fix calls to __hci_cmd_sync()Frederic Danis2015-05-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove test of command reply status as it is already performed by __hci_cmd_sync(). __hci_cmd_sync_ev() function already returns an error if it got a non-zero status either through a Command Complete or a Command Status event. For both of these events the status is collected up in the event handlers called by hci_event_packet() and then passed as the second parameter to req_complete_skb(). The req_complete_skb() callback in turn is hci_req_sync_complete() for __hci_cmd_sync_ev() which stores the status in hdev->req_result. The hdev->req_result is then further converted through bt_to_errno() back in __hci_cmd_sync_ev(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btintel: Fix calls to __hci_cmd_sync()Frederic Danis2015-05-151-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove test of command reply status as it is already performed by __hci_cmd_sync(). __hci_cmd_sync_ev() function already returns an error if it got a non-zero status either through a Command Complete or a Command Status event. For both of these events the status is collected up in the event handlers called by hci_event_packet() and then passed as the second parameter to req_complete_skb(). The req_complete_skb() callback in turn is hci_req_sync_complete() for __hci_cmd_sync_ev() which stores the status in hdev->req_result. The hdev->req_result is then further converted through bt_to_errno() back in __hci_cmd_sync_ev(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btusb: Fix calls to __hci_cmd_sync()Frederic Danis2015-05-151-36/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove test of command reply status as it is already performed by __hci_cmd_sync(). __hci_cmd_sync_ev() function already returns an error if it got a non-zero status either through a Command Complete or a Command Status event. For both of these events the status is collected up in the event handlers called by hci_event_packet() and then passed as the second parameter to req_complete_skb(). The req_complete_skb() callback in turn is hci_req_sync_complete() for __hci_cmd_sync_ev() which stores the status in hdev->req_result. The hdev->req_result is then further converted through bt_to_errno() back in __hci_cmd_sync_ev(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btrtl: Create separate module for Realtek BT driverCarlo Caione2015-05-145-373/+462
| | | | | | | | | | | | | | | | As already done for btintel and btbcm export setup as separate function in a vendor-specific module to hold all the Realtek specific commands. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btmrvl: fix compilation warningXinming Hu2015-05-131-1/+1
| | | | | | | | | | | | | | | | | | This patch fixes a compile warnning "dump_num maybe used uninitialized in this function". Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * Bluetooth: btwilink: remove DEBUG defineLeo Yan2015-05-131-1/+1
| | | | | | | | | | | | | | | | Remove the DEBUG define as the debug code; so can remove mass debug info from log buffer when using dmesg. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: ath3k: add support of 04ca:300f AR3012 deviceDmitry Tunin2015-05-132-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: https://bugs.launchpad.net/bugs/1449730 T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: btusb: Add support for 0cf3:e007Wen-chien Jesse Sung2015-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device 0cf3:e007 is one of the QCA ROME family. T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | Bluetooth: ath3k: Add a new ID 0cf3:e006 to ath3k listWen-chien Jesse Sung2015-05-132-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device info in /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e006 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: off by one in rtl8723b_parse_firmware()Dan Carpenter2015-04-301-1/+1
| | | | | | | | | The ">" should be ">=" so that we don't read past the end of the array. Fixes: 9d9a113e3695 ('Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Fix two coding style issuesMarcel Holtmann2015-04-301-2/+2
| | | | | | | | | | | | ERROR: spaces required around that '<' (ctx:WxV) + if (err <0) ^ ERROR: code indent should use tabs where possible +^I^I^I^I sizeof(ver));$ Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Add Realtek 8723A/8723B/8761A/8821A supportDaniel Drake2015-04-301-0/+399
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Realtek ship a variety of bluetooth USB devices that identify themselves with standard USB Bluetooth device class values, but require a special driver to actually work. Without that driver, you never get any scan results. More recently however, Realtek appear to have wisened up and simply posted a firmware update that makes these devices comply with normal btusb protocols. The firmware needs to be uploaded on each boot. Based on Realtek code from https://github.com/lwfinger/rtl8723au_bt ('new' branch). This enables bluetooth support in the Gigabyte Brix GB-BXBT-2807 which has this RTL8723BE USB device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3410 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms There is no change to the USB descriptor after firmware update, however the version read by HCI_OP_READ_LOCAL_VERSION changes from 0x8723 to 0x3083. This has also been tested on RTL8723AE and RTL8821AE. Support for RTL8761A has also been added, but that is untested. Signed-off-by: Daniel Drake <drake@endlessm.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Add Atheros support for address configurationMarcel Holtmann2015-04-301-0/+34
| | | | | | | | The Atheros support for missing the support for configuration of the Bluetooth public address. Add support for the vendor specific command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Reorder Atheros specific driver callbacksMarcel Holtmann2015-04-301-36/+30
| | | | | | | | | | The driver callbacks in the Atheros support were all in a random order and did not help readability of this driver. So reorder them to make them aligned with what other Bluetooth UART drivers do. This patch is not changing any actual code. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btbcm: Export patchram download as separate functionMarcel Holtmann2015-04-302-69/+85
| | | | | | | | This isolates the Broadcom patchram download procedure as separate function so that it can be easily used from USB and UART based drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: bt3c: Delete some unuseful commentsDingXiang2015-04-301-3/+0
| | | | | | | | I think the comments are used to debug, and we don't need them in mainline code Signed-off-by: DingXiang <dingxiang@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Use proper data structures for Intel vendor eventsMarcel Holtmann2015-04-092-26/+68
| | | | | | | | | | The Intel vendors events indicating firmware loading result and the bootup of the operational firmware are currently hardcoded byte comparisons. So intead of doing that, provide proper data structures and actually use them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Use generic Intel support for address settingMarcel Holtmann2015-04-074-22/+4
| | | | | | | | | The Bluetooth address setting for Intel devices is provided by a generic module now. Start using that module instead of relying it being included in the driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Move Intel command structs into its own headerMarcel Holtmann2015-04-072-33/+33
| | | | | | | | Since the Intel Bluetooth support has its own header, it makes sense to move all command structs into it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btusb: Use generic Intel support for address supportMarcel Holtmann2015-04-072-70/+10
| | | | | | | | | The Bluetooth address handling for Intel devices is provided by a generic module now. Start using that module instead of relying it being included in the driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: btintel: Introduce generic Intel Bluetooth supportMarcel Holtmann2015-04-074-0/+146
| | | | | | | | | | | The majority of Intel Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Intel specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Provide generic H:4 receive frameworkMarcel Holtmann2015-04-074-60/+110
| | | | | | | | | | | | Future H:4 based UART drivers require custom packet types and custom receive functions. To support this, extended the h4_recv_buf function with a packet definition table. For the default H:4 packets types of ACL data, SCO data and events, provide helpers to reduce the amount of code duplication. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 23:11:32 +0100