summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup()Dean Jenkins2017-04-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Before attempting to schedule a work-item onto hu->write_work in hci_uart_tx_wakeup(), check that the Data Link protocol layer is still bound to the HCI UART driver. Failure to perform this protocol check causes a race condition between the work queue hu->write_work running hci_uart_write_work() and the Data Link protocol layer being unbound (closed) in hci_uart_tty_close(). Note hci_uart_tty_close() does have a "cancel_work_sync(&hu->write_work)" but it is ineffective because it cannot prevent work-items being added to hu->write_work after cancel_work_sync() has run. Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_tx_wakeup() which prevents scheduling of the work queue when HCI_UART_PROTO_READY is in the clear state. However, note a small race condition remains because the hci_uart_tx_wakeup() thread can run in parallel with the hci_uart_tty_close() thread so it is possible that a schedule of hu->write_work can occur when HCI_UART_PROTO_READY is cleared. A complete solution needs locking of the threads which is implemented in a future commit. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue()Dean Jenkins2017-04-301-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Before attempting to dequeue a Data Link protocol encapsulated message, check that the Data Link protocol is still bound to the HCI UART driver. This makes the code consistent with the usage of the other proto function pointers. Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_dequeue() and return NULL if the Data Link protocol is not bound. This is needed for robustness as there is a scheduling race condition. hci_uart_write_work() is scheduled to run via work queue hu->write_work from hci_uart_tx_wakeup(). Therefore, there is a delay between scheduling hci_uart_write_work() to run and hci_uart_dequeue() running whereby the Data Link protocol layer could become unbound during the scheduling delay. In this case, without the check, the call to the unbound Data Link protocol layer dequeue function can crash. It is noted that hci_uart_tty_close() has a "cancel_work_sync(&hu->write_work)" statement but this only reduces the window of the race condition because it is possible for a new work-item to be added to work queue hu->write_work after the call to cancel_work_sync(). For example, Data Link layer retransmissions can be added to the work queue after the cancel_work_sync() has finished. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ldisc: Add protocol check to hci_uart_send_frame()Dean Jenkins2017-04-301-0/+3
| | | | | | | | | | | | | | | | | Before attempting to send a HCI message, check that the Data Link protocol is still bound to the HCI UART driver. This makes the code consistent with the usage of the other proto function pointers. Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_send_frame() and return -EUNATCH if the Data Link protocol is not bound. This also allows hci_send_frame() to report the error of an unbound Data Link protocol layer. Therefore, it assists with diagnostics into why HCI messages are being sent when the Data Link protocol is not bound and avoids potential crashes. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add module license for HCI UART Nokia H4+Frédéric Danis2017-04-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following error preventing to load Nokia H4+ module: kernel: [ 826.461619] hci_nokia: module license 'unspecified' taints kernel. kernel: [ 826.461629] Disabling lock debugging due to kernel taint kernel: [ 826.461836] hci_nokia: Unknown symbol gpiod_get_value_cansleep (err 0) kernel: [ 826.461876] hci_nokia: Unknown symbol devm_kmalloc (err 0) kernel: [ 826.461908] hci_nokia: Unknown symbol gpiod_set_value (err 0) kernel: [ 826.461937] hci_nokia: Unknown symbol serdev_device_set_baudrate (err 0) kernel: [ 826.461994] hci_nokia: Unknown symbol gpiod_set_value_cansleep (err 0) kernel: [ 826.462021] hci_nokia: Unknown symbol hci_uart_tx_wakeup (err 0) kernel: [ 826.462043] hci_nokia: Unknown symbol serdev_device_set_flow_control (err 0) kernel: [ 826.462064] hci_nokia: Unknown symbol gpiod_to_irq (err 0) kernel: [ 826.462085] hci_nokia: Unknown symbol serdev_device_open (err 0) kernel: [ 826.462106] hci_nokia: Unknown symbol gpiod_get_value (err 0) kernel: [ 826.462150] hci_nokia: Unknown symbol clk_prepare (err 0) kernel: [ 826.462182] hci_nokia: Unknown symbol pm_runtime_enable (err 0) kernel: [ 826.462204] hci_nokia: Unknown symbol h4_recv_buf (err 0) kernel: [ 826.462246] hci_nokia: Unknown symbol serdev_device_write_flush (err 0) kernel: [ 826.462268] hci_nokia: Unknown symbol serdev_device_get_tiocm (err 0) kernel: [ 826.462298] hci_nokia: Unknown symbol driver_unregister (err 0) kernel: [ 826.462318] hci_nokia: Unknown symbol serdev_device_wait_until_sent (err 0) kernel: [ 826.462347] hci_nokia: Unknown symbol __serdev_device_driver_register (err 0) kernel: [ 826.462384] hci_nokia: Unknown symbol serdev_device_set_tiocm (err 0) kernel: [ 826.462417] hci_nokia: Unknown symbol clk_get_rate (err 0) kernel: [ 826.462454] hci_nokia: Unknown symbol __pm_runtime_resume (err 0) kernel: [ 826.462486] hci_nokia: Unknown symbol serdev_device_close (err 0) kernel: [ 826.462524] hci_nokia: Unknown symbol cancel_work_sync (err 0) kernel: [ 826.462546] hci_nokia: Unknown symbol btbcm_set_bdaddr (err 0) kernel: [ 826.462567] hci_nokia: Unknown symbol clk_disable (err 0) kernel: [ 826.462610] hci_nokia: Unknown symbol __pm_runtime_disable (err 0) kernel: [ 826.462632] hci_nokia: Unknown symbol hci_uart_register_device (err 0) kernel: [ 826.462653] hci_nokia: Unknown symbol clk_enable (err 0) kernel: [ 826.462675] hci_nokia: Unknown symbol __pm_runtime_idle (err 0) kernel: [ 826.462700] hci_nokia: Unknown symbol clk_unprepare (err 0) Signed-off-by: Frédéric Danis <frederic.danis.oss@gmail.com> Acked-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ldisc: Add missing clear HCI_UART_PROTO_READYDean Jenkins2017-04-221-0/+1
| | | | | | | | | | | | | | | | Ensure that HCI_UART_PROTO_READY is cleared before close(hu) is called which closes the Data Link protocol layer. Therefore, add the missing bit clear of HCI_UART_PROTO_READY to hci_uart_init_work() so that the flag is cleared when hci_register_dev fails. Without the fix, the functions of the Data Link protocol layer could potentially be accessed after that layer has been closed. This could lead to a crash as memory would have been freed in that layer. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ldisc: Ensure hu->hdev set to NULL before freeing hdevDean Jenkins2017-04-221-1/+4
| | | | | | | | | | | | When hci_register_dev() fails, hu->hdev should be set to NULL before freeing hdev. This avoids potential use of hu->hdev after it has been freed. This commit sets hu->hdev to NULL before calling hci_free_dev() in error handling scenarios in hci_uart_init_work() and hci_uart_register_dev(). Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ldisc: Add missing return in hci_uart_init_work()Dean Jenkins2017-04-221-0/+1
| | | | | | | | | | | | | | | If hci_register_dev() returns an error in hci_uart_init_work() then the HCI_UART_REGISTERED bit gets erroneously set due to a missing return statement. Therefore, add the missing return statement. The consequence of the missing return is that the HCI UART is not registered but HCI_UART_REGISTERED is set which allows the code to think that hu->hdev is safe to access but hu->hdev has been freed so could lead to a crash. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: try to improve CONFIG_SERIAL_DEV_BUS dependencyArnd Bergmann2017-04-222-2/+8
| | | | | | | | | | | | | | | | | | | | | | With CONFIG_SERIAL_DEV_BUS=m, the hci_serdev.o file does not actually get built into hci_uart.o as the Makefile doesn't pick it up, leading to a link error with anything referring to it: ERROR: "hci_uart_register_device" [drivers/bluetooth/hci_nokia.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed Changing this in the Makefile would cause another problem when hci_uart itself is built-in and cannot reference symbols from the serdev module. This tries to address both problems by introducing a new hidden Kconfig symbol that controls both the compilation of hci_serdev.o and whether the Nokia driver can be selected. This seems to address the problem for me, though there might be a better way to do it. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_ll: Fix NULL pointer deref on FW upload failureSebastian Reichel2017-04-221-2/+1
| | | | | | | | | | | Avoid NULL pointer dereference occurring due to freeing skb containing an error pointer. It can easily be triggered by using the driver with broken uart (i.e. due to misconfigured pinmuxing). Fixes: 371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support") Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* bluetooth: hci_uart: add LL protocol serdev driver supportRob Herring2017-04-131-1/+261
| | | | | | | | | | | | | | | | | | | | Turns out that the LL protocol and the TI-ST are the same thing AFAICT. The TI-ST adds firmware loading, GPIO control, and shared access for NFC, FM radio, etc. For now, we're only implementing what is needed for BT. This mirrors other drivers like BCM and Intel, but uses the new serdev bus. The firmware loading is greatly simplified by using existing infrastructure to send commands. It may be a bit slower than the original code using synchronous functions, but the real bottleneck is likely doing firmware load at 115.2kbps. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* bluetooth: hci_uart: remove unused hci_uart_init_ttyRob Herring2017-04-132-20/+0
| | | | | | | | | | | There are no users of hci_uart_init_tty, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: add nokia driverSebastian Reichel2017-04-133-0/+834
| | | | | | | | This adds a driver for the Nokia H4+ protocol, which is used at least on the Nokia N9, N900 & N950. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_serdev: allow modular driversSebastian Reichel2017-04-122-0/+2
| | | | | | | | | | | | For bluetooth protocol driver only supporting serdev it makes sense to follow common practice and built them into their own module. Such modules need access to hci_uart_register_device and hci_uart_tx_wakeup for using the common protocol helpers. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_serdev: do not open device in hci openSebastian Reichel2017-04-121-9/+3
| | | | | | | | | | The device driver may need to communicate with the UART device while the Bluetooth device is closed (e.g. due to interrupts). Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: add serdev driver support libraryRob Herring2017-04-123-0/+366
| | | | | | | | | | | | | | | | | This adds library functions for serdev based BT drivers. This is largely copied from hci_ldisc.c and modified to use serdev calls. There's a little bit of duplication, but I avoided intermixing this as the ldisc code should eventually go away. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> [Fix style issues reported by Pavel] Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: add support for word alignmentSebastian Reichel2017-04-123-0/+24
| | | | | | | | | This will be used by Nokia's H4+ protocol, which uses 2-byte aligned packets. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: remove unnecessary wakeup interrupt number sanity checkXinming Hu2017-04-121-5/+3
| | | | | | | | | | Sanity check of interrupt number in interrupt handler is unnecessary and confusion, remove it. Reported-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: disable platform wakeup interrupt in suspend failure pathXinming Hu2017-04-121-0/+7
| | | | | | | | | | Host sleep handshake with device might been fail, disable platform wakeup interrupt in this case. Reported-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_intel: add missing tty-device sanity checkJohan Hovold2017-04-121-1/+12
| | | | | | | | | | | | | Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 74cdad37cd24 ("Bluetooth: hci_intel: Add runtime PM support") Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver") Cc: stable <stable@vger.kernel.org> # 4.3 Cc: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_bcm: add missing tty-device sanity checkJohan Hovold2017-04-121-1/+4
| | | | | | | | | | | | Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices") Cc: stable <stable@vger.kernel.org> # 4.3 Cc: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: cleanup code in return from btmrvl_sdio_suspend()prasanna karthik2017-04-121-3/+3
| | | | | | | Else is not generally useful after a break or return Signed-off-by: Prasanna Karthik <pkarthik@outlook.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_bcm: Support platform enumerationAndy Shevchenko2017-04-121-17/+33
| | | | | | | | | | | | Until now the driver supports only ACPI enumeration. Nevertheless Intel Edison SoM has Broadcom Wi-Fi + BT chip and neither ACPI nor DT enumeration mechanism. Enable pure platform driver in order to support Intel Edison SoM. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: wake system up when receives a wake irqJeffy Chen2017-04-121-2/+7
| | | | | | | | | | | Currrently we are disabling this wake irq after receiving it. If this happens before we finish suspend and the pm event check is disabled, the system will continue suspending, and this irq would not work again. We may need to abort system suspend to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: wake system up when receives a wake irqJeffy Chen2017-04-121-0/+2
| | | | | | | | | | | Currrently we are disabling this wake irq after receiving it. If this happens before we finish suspend and the pm event check is disabled, the system will continue suspending, and this irq would not work again. We may need to abort system suspend to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btrtl: Change message for missing config fileLarry Finger2017-04-121-5/+8
| | | | | | | | | | | | The message concerning missing config files for 8723b, 8821a, and 8761a should have been issued with BT_INFO() rather than BT_ERR() as this condition is not fatal. After looking at that code, I have reworked the logic to log such messages only if the device needs such a config file. At the moment, only the 8822b fits that description. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: 陆朱伟 <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Added support for Rivet Networks Killer 1535Gabriel2017-04-121-0/+1
| | | | Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_intel: Add support Intel Bluetooth device 9160/9260 for UARTTedd Ho-Jeong An2017-04-121-0/+1
| | | | | | | | This patch adds support for Intel Bluetooth device 9160/9260 also known as ThunderPeak(ThP) for UART. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_intel: Fix firmware file name to use hw_variantTedd Ho-Jeong An2017-04-121-6/+10
| | | | | | | | | | | | The format of Intel Bluetooth firmware for bootloader product is ibt-<hw_variant>-<device_revision_id>.sfi and .ddc. This patch uses a hw_variant value read from the device during runtime to form the firmware filenames instead of using a constant value, so it can support multiple prouducts. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add support for Intel Bluetooth devices 9160/9260 [8087:0025]Marcel Holtmann2017-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new Bluetooth devices 9160/9260 (also known as ThunderPeak) devices from Intel use the same firmware loading mechanism as previous generation. So include the new USB product identifier and whitelist the hardware variant. T: Bus=02 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0025 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015 Bluetooth: hci0: Device revision is 2 Bluetooth: hci0: Secure boot is enabled Bluetooth: hci0: OTP lock is disabled Bluetooth: hci0: API lock is disabled Bluetooth: hci0: Debug lock is disabled Bluetooth: hci0: Minimum firmware build 1 week 10 2014 < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 5.0 (0x09) - Revision 256 (0x0100) LMP version: Bluetooth 5.0 (0x09) - Subversion 256 (0x0100) Manufacturer: Intel Corp. (2) Based on original patch from Jaya Praveen G <jaya.p.g@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use switch statement for Intel hardware variantsTedd Ho-Jeong An2017-04-122-9/+18
| | | | | | | | | | | | Multiple new hardware variants are planned and the simple if statement would get really complicated and unreadable. So instead replace it with a simple switch statement. The change is applied to both USB and UART. Based-on-patch-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: bluecard: use setup_timerGeliang Tang2017-04-121-3/+2
| | | | | | | Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_bcm: Fix clock (un)prepareJohn Keeping2017-04-121-2/+2
| | | | | | | | | The hci_bcm driver currently does not prepare/unprepare the clock and goes directly to enable, but as the documentation for clk_enable says, clk_prepare must be called before clk_enable. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: fix spelling mistake: "unregester" -> "unregister"Colin Ian King2017-04-121-1/+1
| | | | | | | trivial fix to spelling mistake in debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* soc: qcom: smd: Transition client drivers from smd to rpmsgBjorn Andersson2017-03-292-17/+17
| | | | | | | | | | | | | | | | By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross <andy.gross@linaro.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Bluetooth: btqcomsmd: fix compile-test dependencyArnd Bergmann2017-03-231-1/+2
| | | | | | | | | | | | | | | | | | | | | compile-testing fails when QCOM_SMD is a loadable module: drivers/bluetooth/built-in.o: In function `btqcomsmd_send': btqca.c:(.text+0xa8): undefined reference to `qcom_smd_send' drivers/bluetooth/built-in.o: In function `btqcomsmd_probe': btqca.c:(.text+0x3ec): undefined reference to `qcom_wcnss_open_channel' btqca.c:(.text+0x46c): undefined reference to `qcom_smd_set_drvdata' This clarifies the dependency to allow compile-testing only when SMD is completely disabled, otherwise the dependency on QCOM_SMD will make sure we can link against it. Fixes: e27ee2b16bad ("Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabled") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [bjorn: Restructure and clarify dependency to QCOM_WCNSS_CTRL] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* btmrvl: fix spelling mistake: "actived" -> "activated"Colin Ian King2017-02-191-1/+1
| | | | | | | trivial fix to spelling mistake in error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_qca: fix spelling mistake: "Spurrious" -> "Spurious"Colin Ian King2017-02-181-2/+2
| | | | | | | trivial fix to spelling mistake in error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btmrvl: fix spelling mistake: "caibration" -> "calibration"Colin Ian King2017-02-161-1/+1
| | | | | | | trivial fix to spelling mistake in BT_ERR error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabledJavier Martinez Canillas2017-02-161-1/+1
| | | | | | | | | | | | The driver only has runtime but no build time dependency with QCOM_SMD && QCOM_WCNSS_CTRL. So it can be built for testing purposes if COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add another AR3012 04ca:3018 deviceDmitry Tunin2017-02-162-0/+3
| | | | | | | | | | | | | T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
* Bluetooth: hci_bcm: Add support for BCM2E95 and BCM2E96Daniel Drake2017-02-161-24/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM2E96 ID is used by the ECS EF20 laptop, and BCM2E95 is present in the Weibu F3C. Both are now logged as: hci0: BCM: chip id 82 hci0: BCM43341B0 (002.001.014) build 0000 hci0: BCM (002.001.014) build 0158 The ECS vendor kernel predates the host-wakeup support in hci_bcm but it explicitly has a comment saying that the GPIO assignment needs to be reordered for BCM2E96: 1. (not used in vendor driver) 2. Device wakeup 3. Shutdown For both devices in question, the DSDT has these GPIOs listed in order of GpioInt, GpioIo, GpioIo. And if we use the first one listed (GpioInt) as the host wakeup, that interrupt handler fires while doing bluetooth I/O. I am assuming the convention of GPIO ordering has been changed for these new device IDs, so lets use the new ordering on such devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btbcm: Add a delay for module resetWen-chien Jesse Sung2017-02-161-0/+3
| | | | | | | | | | | Some btbcm devices require more time to complete its reset process. They won't reply any hci command until reset is done. [ 17.218554] Bluetooth: hci0 command 0x1001 tx timeout [ 25.214999] Bluetooth: hci0: BCM: Reading local version info failed (-110) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add support for 413c:8143Wen-chien Jesse Sung2017-02-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a Boardcom module and requires patchram to work. T: Bus=01 Lev=03 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8143 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=20689D1FAF94 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* btmrvl: use dt's irqflags for wakeup pinJeffy Chen2017-02-161-2/+1
| | | | | | | | Use irqflags parsed from dt. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* btmrvl: set irq_bt to -1 when failed to parse itJeffy Chen2017-02-161-0/+1
| | | | | | | | | | | The irq_of_parse_and_map will return 0 as a invalid irq. Set irq_bt to -1 in this case, so that the btmrvl resume/suspend code would not try to enable/disable it. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* btmrvl: avoid double-disable_irq() raceJeffy Chen2017-02-161-2/+6
| | | | | | | | | | | | | | | | It's much the same as what we did for mwifiex in: b9da4d2 mwifiex: avoid double-disable_irq() race "We have a race where the wakeup IRQ might be in flight while we're calling mwifiex_disable_wake() from resume(). This can leave us disabling the IRQ twice. Let's disable the IRQ and enable it in case if we have double-disabled it." Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeupRajat Jain2017-02-161-0/+51
| | | | | | | | | | | | | | The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Add out-of-band wakeup supportRajat Jain2017-02-161-0/+85
| | | | | | | | | | | | | | | | | | | | Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that can be connected to a gpio on the CPU side, and can be used to wakeup the host out-of-band. This can be useful in situations where the in-band wakeup is not possible or not preferable (e.g. the in-band wakeup may require the USB host controller to remain active, and hence consuming more system power during system sleep). The oob gpio interrupt to be used for wakeup on the CPU side, is read from the device tree node, (using standard interrupt descriptors). A devcie tree binding document is also added for the driver. The compatible string is in compliance with Documentation/devicetree/bindings/usb/usb-device.txt Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btusb: Use an error label for error pathsRajat Jain2017-02-161-10/+9
| | | | | | | | Use a label to remove the repetetive cleanup, for error cases. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: btqcomsmd: Fix module autoloadJavier Martinez Canillas2017-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias $ After this patch: $ modinfo drivers/bluetooth/btqcomsmd.ko | grep alias alias: of:N*T*Cqcom,wcnss-btC* alias: of:N*T*Cqcom,wcnss-bt Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 05:39:37 +0100