summaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm/Kconfig (follow)
Commit message (Collapse)AuthorAgeFilesLines
* tpm: tis: Kconfig: Add helper dependency on COMPILE_TESTCai Huoqing2021-10-261-1/+1
| | | | | | | | | | COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86). In this case, the support of COMPILE_TEST is added, so this module could be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* char: tpm: Kconfig: remove bad i2c cr50 selectAdrian Ratiu2021-08-231-1/+0
| | | | | | | | | | | | This fixes a minor bug which went unnoticed during the initial driver upstreaming review: TCG_CR50 does not exist in mainline kernels, so remove it. Fixes: 3a253caaad11 ("char: tpm: add i2c driver for cr50") Cc: stable@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* char: tpm: add i2c driver for cr50Duncan Laurie2021-02-161-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Add TPM 2.0 compatible I2C interface for chips with cr50 firmware. The firmware running on the currently supported H1 MCU requires a special driver to handle its specific protocol, and this makes it unsuitable to use tpm_tis_core_* and instead it must implement the underlying TPM protocol similar to the other I2C TPM drivers. - All 4 bytes of status register must be read/written at once. - FIFO and burst count is limited to 63 and must be drained by AP. - Provides an interrupt to indicate when read response data is ready and when the TPM is finished processing write data. This driver is based on the existing infineon I2C TPM driver, which most closely matches the cr50 i2c protocol behavior. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Tested-by: Adrian Ratiu <adrian.ratiu@collabora.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* tpm: tis: add support for MMIO TPM on SynQuacerMasahisa Kojima2020-10-011-0/+12
| | | | | | | | | | | | | When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO window that is backed by the SPI command sequencer in the SPI bus controller. This arrangement has the limitation that only byte size accesses are supported, and so we'll need to provide a separate module that take this into account. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2020-06-131-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* tpm: tpm_tis_spi: Support cr50 devicesAndrey Pronin2019-11-121-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEESasha Levin2019-09-021-0/+5
| | | | | | | | | | | | | | | | | | Add a driver for a firmware TPM running inside TEE. Documentation of the firmware TPM: https://www.microsoft.com/en-us/research/publication/ftpm-software-implementation-tpm-chip/ . Implementation of the firmware TPM: https://github.com/Microsoft/ms-tpm-20-ref/tree/master/Samples/ARM32-FirmwareTPM Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Co-authored-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Make anon_inodes unconditionalDavid Howells2019-04-191-1/+0
| | | | | | | | | | Make the anon_inodes facility unconditional so that it can be used by core VFS code and pidfd code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [christian@brauner.io: adapt commit message to mention pidfds] Signed-off-by: Christian Brauner <christian@brauner.io>
* tpm: Make SECURITYFS a weak dependencyPeter Huewe2018-10-051-1/+1
| | | | | | | | | | | | | | | | While having SECURITYFS enabled for the tpm subsystem is beneficial in most cases, it is not strictly necessary to have it enabled at all. Especially on platforms without any boot firmware integration of the TPM (e.g. raspberry pi) it does not add any value for the tpm subsystem, as there is no eventlog present. By turning it from 'select' to 'imply' it still gets selected per default, but enables users who want to save some kb of ram by turning SECURITYFS off. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm: Move Linux RNG connection to hwrngJason Gunthorpe2018-01-081-0/+11
| | | | | | | | | | | | | The tpm-rng.c approach is completely inconsistent with how the kernel handles hotplug. Instead manage a hwrng device for each TPM. This will cause the kernel to read entropy from the TPM when it is plugged in, and allow access to the TPM rng via /dev/hwrng. Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca> Tested-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm/tpm_crb: Enable TPM CRB interface for ARM64Jiandi An2017-04-031-1/+1
| | | | | | | | | | | | | | | | | | | This enables TPM Command Response Buffer interface driver for ARM64 and implements an ARM specific TPM CRB start method that invokes a Secure Monitor Call (SMC) to request the TrustZone Firmware to execute or cancel a TPM 2.0 command. In ARM, TrustZone security extensions enable a secure software environment with Secure Monitor mode. A Secure Monitor Call (SMC) is used to enter the Secure Monitor mode and perform a Secure Monitor service to communicate with TrustZone firmware which has control over the TPM hardware. Signed-off-by: Jiandi An <anjiandi@codeaurora.org> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (on x86/PTT) Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm: select CONFIG_CRYPTOArnd Bergmann2017-04-031-0/+1
| | | | | | | | | | | | | | | We get a newly introduced harmless warning when CONFIG_CRYPTO is disabled: warning: (TCG_TPM && TRUSTED_KEYS && IMA) selects CRYPTO_HASH_INFO which has unmet direct dependencies (CRYPTO) This adds another select to avoid the warning, consistent with other users of the crypto code. Fixes: c1f92b4b04ad ("tpm: enhance TPM 2.0 PCR extend to support multiple banks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm: enhance TPM 2.0 PCR extend to support multiple banksNayna Jain2017-02-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | The current TPM 2.0 device driver extends only the SHA1 PCR bank but the TCG Specification[1] recommends extending all active PCR banks, to prevent malicious users from setting unused PCR banks with fake measurements and quoting them. The existing in-kernel interface(tpm_pcr_extend()) expects only a SHA1 digest. To extend all active PCR banks with differing digest sizes, the SHA1 digest is padded with trailing 0's as needed. This patch reuses the defined digest sizes from the crypto subsystem, adding a dependency on CRYPTO_HASH_INFO module. [1] TPM 2.0 Specification referred here is "TCG PC Client Specific Platform Firmware Profile for TPM 2.0" Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm_tis: Allow tpm_tis to be bound using DTJason Gunthorpe2016-11-281-1/+1
| | | | | | | | | | | | This provides an open firwmare driver binding for tpm_tis. OF is useful on arches where ACPI/PNP is not used. The tcg,tpm-tis-mmio register map interface is specified by the TCG. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm/tpm_tis_spi: Add support for spi phyChristophe Ricard2016-06-251-0/+12
| | | | | | | | | | | | | | | | | | | | | Spi protocol standardized by the TCG is now supported by most of TPM vendors. It supports SPI Bit Protocol as describe in the TCG PTP specification (chapter 6.4.6 SPI Bit Protocol). Irq mode is not supported. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phyChristophe Ricard2016-06-251-0/+7
| | | | | | | | | | | | | | | | | | | | | To avoid code duplication between the old tpm_tis and the new and future native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked, so that all common logic is extracted and can be reused from all drivers. The core methods can also be used from other TIS like drivers. itpm workaround is now managed with a specific tis flag TPM_TIS_ITPM_POSSIBLE. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm: select ANON_INODES for proxy driverArnd Bergmann2016-06-251-0/+1
| | | | | | | | | | | | | | | | | The newly added vtpmx driver fails to build if CONFIG_ANON_INODES is disabled: drivers/char/built-in.o: In function `vtpmx_fops_ioctl': (.text+0x97f8): undefined reference to `anon_inode_getfile' This adds a Kconfig 'select' statement to ensure it's always there when we need it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 794c38e01358 ("tpm: Proxy driver for supporting multiple emulated TPMs") Acked-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm: Proxy driver for supporting multiple emulated TPMsStefan Berger2016-06-251-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a proxy driver for supporting multiple emulated TPMs in a system. The driver implements a device /dev/vtpmx that is used to created a client device pair /dev/tpmX (e.g., /dev/tpm10) and a server side that is accessed using a file descriptor returned by an ioctl. The device /dev/tpmX is the usual TPM device created by the core TPM driver. Applications or kernel subsystems can send TPM commands to it and the corresponding server-side file descriptor receives these commands and delivers them to an emulated TPM. The driver retrievs the TPM 1.2 durations and timeouts. Since this requires the startup of the TPM, we send a startup for TPM 1.2 as well as TPM 2. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> CC: linux-kernel@vger.kernel.org CC: linux-doc@vger.kernel.org CC: linux-api@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
* tpm: Update KConfig text to include TPM2.0 FIFO chipsPeter Huewe2015-03-181-4/+5
| | | | | | | | | I got a lot of requests lately about whether the new TPM2.0 support includes the FIFO interface for TPM2.0 as well. The FIFO interface is handled by tpm_tis since FIFO=TIS (more or less). -> Update the helptext and headline Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)Christophe Ricard2015-03-181-10/+1
| | | | | | | | | | | | | | | tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used by different phy such as i2c or spi. The core part is called st33zp24 which is also the main part reference. include/linux/platform_data/tpm_stm_st33.h is renamed consequently. The driver is also split into an i2c phy in charge of sending/receiving data as well as managing platform data or dts configuration. Acked-by: Jarkko Sakkinen <jarkko.sakknen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* tpm: TPM 2.0 CRB InterfaceJarkko Sakkinen2015-01-171-0/+9
| | | | | | | | | | | | | | | | | | tpm_crb is a driver for TPM 2.0 Command Response Buffer (CRB) Interface as defined in PC Client Platform TPM Profile (PTP) Specification. Only polling and single locality is supported as these are the limitations of the available hardware, Platform Trust Techonlogy (PTT) in Haswell CPUs. The driver always applies CRB with ACPI start because PTT reports using only ACPI start as start method but as a result of my testing it requires also CRB start. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jasob Gunthorpe <jason.gunthorpe@obsidianresearch.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* tpm/tpm_i2c_stm_st33: Update Kconfig in order to be inline to other similar ↵Christophe Ricard2015-01-171-3/+3
| | | | | | | | | | | | | | product STMicroelectronics i2c tpm is the only one to have a different tristate label. Rename it "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)" Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> [phuewe: corrected module name in the helptext] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAPUwe Kleine-König2014-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tpm: use tabs instead of whitespaces in KconfigPeter Huewe2013-10-221-8/+8
| | | | | | just like the other entries Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* tpm: Fix module name description in Kconfig for tpm_i2c_infineonPeter Huewe2013-10-221-1/+1
| | | | | | | This patch changes the displayed module name from tpm_tis_i2c_infineon to its actual name tpm_i2c_infineon. Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* tpm: Add support for Atmel I2C TPMsJason Gunthorpe2013-10-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is based on the work of Teddy Reed <teddy@prosauce.org> published on GitHub: https://github.com/theopolis/tpm-i2c-atmel.git 34894b988b67e0ae55088d6388e77b0dbf10c07d That driver was never merged, I have taken it as a starting port, forward ported, tested and revised the driver: - Make it broadly textually similar to the Infineon and Nuvoton I2C driver - Place everything in a format suitable for mainline inclusion - Use high level I2C functions i2c_master_send and i2c_master_recv for data xfer - Use the timeout system from the core code, by faking out a status register - Only I2C transfer the number of bytes in the reply, not a fixed message size. - checkpatch cleanups - Testing on ARM Kirkwood, with this device tree, using a AT97SC3204T-X1A180 tpm@29 { compatible = "atmel,at97sc3204t"; reg = <0x29>; }; Signed-off-by: Teddy Reed <teddy@prosauce.org> [jgg: revised and tested] Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [phuewe: minor whitespace changes] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* tpm: Add support for the Nuvoton NPCT501 I2C TPMJason Gunthorpe2013-10-221-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This chip is/was also branded as a Winbond WPCT301. Originally written by Dan Morav <dmorav@nuvoton.com> and posted to LKML: https://lkml.org/lkml/2011/9/7/206 The original posting was not merged, I have taken it as a starting point, forward ported, tested and revised the driver: - Rework interrupt handling to work properly with level triggered interrupts. The old version just locked up. - Synchronize various items with Peter Huewe's Infineon driver: * Add durations/timeouts sysfs calls * Remove I2C device auto-detection * Don't fiddle with chip->release * Call tpm_dev_vendor_release in the probe error path * Use MODULE_DEVICE_TABLE for the I2C ids * Provide OF compatible strings for DT support * Use SIMPLE_DEV_PM_OPS * Use module_i2c_driver - checkpatch cleanups - Testing on ARM Kirkwood with GPIO interrupts, with this device tree: tpm@57 { compatible = "nuvoton,npct501"; reg = <0x57>; interrupt-parent = <&gpio1>; interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; Signed-off-by: Dan Morav <dmorav@nuvoton.com> [jgg: revised and tested] Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [phuewe: minor whitespace changes, fixed module name in kconfig] Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
* drivers/xen-tpmfront: Fix compile issue with missing option.Konrad Rzeszutek Wilk2013-08-301-0/+1
| | | | | | | | | | | | | | Randy reports: x86_64: drivers/built-in.o: In function `xen_tpmfront_init': xen-tpmfront.c:(.init.text+0x257c): undefined reference to `xenbus_register_frontend' This is nicely fixed by selecting the XenBus frontend module. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* drivers/tpm: add xen tpmfront interfaceDaniel De Graaf2013-08-091-0/+11
| | | | | | | | | | | | | | This is a complete rewrite of the Xen TPM frontend driver, taking advantage of a simplified frontend/backend interface and adding support for cancellation and timeouts. The backend for this driver is provided by a vTPM stub domain using the interface in Xen 4.3. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Acked-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* tpm/ibmvtpm: build only when IBM pseries is configuredKent Yoder2013-02-141-1/+1
| | | | Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* TPM: STMicroelectronics ST33 I2C BUILD STUFFMathias Leblanc2013-02-051-0/+10
| | | | | | | | | | | | | | | | | | | | * STMicroelectronics version 1.2.0, Copyright (C) 2010 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. * This is free software, and you are welcome to redistribute it * under certain conditions. This is the driver for TPM chip from ST Microelectronics. If you have a TPM security chip from STMicroelectronics working with an I2C, in menuconfig or .config choose the tpm driver on device --> tpm and activate the protocol of your choice before compiling the kernel. The driver will be accessible from within Linux. Tested on linux x86/x64, beagleboard REV B & XM REV C and CHROMIUM OS Signed-off-by: Mathias Leblanc <mathias.leblanc@st.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* drivers/char/tpm: Add new device driver to support IBM vTPMAshley Lai2012-08-221-0/+8
| | | | | | | | | | | | | | | This patch adds a new device driver to support IBM virtual TPM (vTPM) for PPC64. IBM vTPM is supported through the adjunct partition with firmware release 740 or higher. With vTPM support, each lpar is able to have its own vTPM without the physical TPM hardware. This driver provides TPM functionalities by communicating with the vTPM adjunct partition through Hypervisor calls (Hcalls) and Command/Response Queue (CRQ) commands. Signed-off-by: Ashley Lai <adlai@us.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* char/tpm: Add new driver for Infineon I2C TIS TPMPeter Huewe2012-08-221-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver to support Infineon's SLB 9635 TT 1.2 Soft I2C TPMs which follow the TGC TIS 1.2 TPM specification[1] and Infineon's I2C Protocol Stack Specification 0.20. The I2C Protocol Stack Specification is a simple adaption of the LPC TIS Protocol to the I2C Bus. The I2C TPMs can be used when LPC Bus is not available (i.e. non x86 architectures like ARM). The driver is based on the tpm_tis.c driver by Leendert van Dorn and Kyleen Hall and has quite similar functionality. Tested on Nvidia ARM Tegra2 Development Platform and Beagleboard (ARM OMAP) Tested with the Trousers[2] TSS API Testsuite v 0.3 [3] Compile-tested on x86 (32/64-bit) Updates since version 2.1.4: - included "Lock the I2C adapter for a sequence of requests", by Bryan Freed - use __i2c_transfer instead of own implementation of unlocked i2c_transfer - use struct dev_pm_ops for power management via SIMPLE_DEV_PM_OPS Updates since version 2.1.3: - use proper probing mechanism * either add the tpm using I2C_BOARD_INFO to your board file or probe it * during runtime e.g on BeagleBoard using : * "echo tpm_i2c_infineon 0x20 > /sys/bus/i2c/devices/i2c-2/new_device" - fix possible endless loop if hardware misbehaves - improved return codes - consistent spelling i2c/tpm -> I2C/TPM - remove hardcoded sleep values and msleep usage - removed debug statements - added check for I2C functionality - renaming to tpm_i2c_infineon Updates since version 2.1.2: - added sysfs entries for duration and timeouts - updated to new tpm_do_selftest Updates since version 2.1.0: - improved error handling - implemented workarounds needed by the tpm - fixed typos References: [1] http://www.trustedcomputinggroup.org/resources/pc_client_work_group_pc_client_ specific_tpm_interface_specification_tis_version_12/ [2] http://trousers.sourceforge.net/ [3] http://sourceforge.net/projects/trousers/files/TSS%20API%20test%20suite/0.3/ Reviewed-by: Andi Shyti <andi.shyti@gmail.com> Acked-by: Marcel Selhorst <tpmdd@selhorst.net> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Bryan Freed <bfreed@chromium.org> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
* ima: fix Kconfig dependenciesFabio Estevam2012-01-201-1/+0
| | | | | | | | | | | | Fix the following build warning: warning: (IMA) selects TCG_TPM which has unmet direct dependencies (HAS_IOMEM && EXPERIMENTAL) Suggested-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
* Merge branch 'for-james' of git://github.com/srajiv/tpm into nextJames Morris2011-11-171-0/+2
|\
| * TPM: NSC and TIS drivers X86 dependency fixRajiv Andrade2011-11-161-0/+2
| | | | | | | | | | | | | | | | | | A previous commit removed its PNP dependency, that in fact wasn't necessary, but also allowed it be built for other architectures not supported by it. This then caused kernel oops on PPC based machines. I'm placing a x86 dependency back correctly. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
* | TPM: TCG_ATMEL should depend on HAS_IOPORTGeert Uytterhoeven2011-09-231-0/+1
|/ | | | | | | | | | | | | | | | | | | | On m68k, I get: drivers/char/tpm/tpm_atmel.h: In function ‘atmel_get_base_addr’: drivers/char/tpm/tpm_atmel.h:129: error: implicit declaration of function ‘ioport_map’ drivers/char/tpm/tpm_atmel.h:129: warning: return makes pointer from integer without a cast The code in tpm_atmel.h supports PPC64 (using the device tree and ioremap()) and "anything else" (using ioport_map()). However, ioportmap() is only available on platforms that set HAS_IOPORT. Although PC64 seems to have HAS_IOPORT, a "depends on HAS_IOPORT" should work, but I think it's better to expose the special PPC64 handling explicit using "depends on PPC64 || HAS_IOPORT". Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* Update broken web addresses in the kernel.Justin P. Mattock2010-10-181-1/+1
| | | | | | | | | | | | | | | | | The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* TPM: ACPI/PNP dependency removalRajiv Andrade2010-05-171-2/+4
| | | | | | | | | | | | This patch pushes the ACPI dependency into the device driver code itself. Now, even without ACPI/PNP enabled, the device can be registered using the TIS specified memory space. This will however result in the lack of access to the BIOS event log, being the only implication of such ACPI removal. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* Revert "TPM: ACPI/PNP dependency removal"James Morris2010-05-071-11/+3
| | | | | | | | | | | | | | | | | | This reverts commit b89e66e1e396f7b5436af154e58209320cc08aed. > > When CONFIG_PM is not set: > > > > drivers/built-in.o: In function `acpi_init': > > bus.c:(.init.text+0x2d84): undefined reference to `pm_flags' > > bus.c:(.init.text+0x2d91): undefined reference to `pm_flags' > > CONFIG_ACPI depends on CONFIG_PM, > so acpi/bus.c should not be compiled for CONFIG_PM=n > > Hmm, is is somebody doing something strange, like "select ACPI" > without guaranteeing that all of ACPI's dependencies are satisfied? Signed-off-by: James Morris <jmorris@namei.org>
* TPM: ACPI/PNP dependency removalRajiv Andrade2010-05-051-3/+11
| | | | | | | | | | | | This patch pushes the ACPI dependency into the device driver code itself. Now, even without ACPI/PNP enabled, the device can be registered using the TIS specified memory space. This will however result in the lack of access to the bios event log, being the only implication of such ACPI removal. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* securityfs: do not depend on CONFIG_SECURITYEric Paris2008-08-281-0/+1
| | | | | | | | | | Add a new Kconfig option SECURITYFS which will build securityfs support but does not require CONFIG_SECURITY. The only current user of securityfs does not depend on CONFIG_SECURITY and there is no reason the full LSM needs to be built to build this fs. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
* tpm: change Kconfig dependencies from PNPACPI to PNPBjorn Helgaas2008-04-291-3/+2
| | | | | | | | | | | | | | | | | There is no "PNPACPI" driver interface as such. PNPACPI is an internal backend of PNP, and drivers just use the generic PNP interface. The drivers should depend on CONFIG_PNP, not CONFIG_PNPACPI. tpm_nsc.c doesn't use PNP at all, so we can just remove the dependency completely. It probably *should* use PNP to discover the device, but until it does, there's no point in depending on PNP. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use menuconfig objects II - TPMJan Engelhardt2007-07-161-10/+8
| | | | | | | | | | | | Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky2007-05-101-0/+1
| | | | | | | Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Fix trivial typos in Kconfig* filesDavid Sterba2007-05-091-1/+1
| | | | | | | Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] tpm: update module dependenciesKylene Jo Hall2006-05-151-1/+1
| | | | | | | | | The TIS driver is dependent upon information from the ACPI table for device discovery thus it compiles but does no actual work without this dependency. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: driver for next generation TPM chipsLeendert van Doorn2006-04-221-1/+10
| | | | | | | | | | | | | The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by: Leendert van Doorn <leendert@watson.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: remove PCI kconfig dependencyKylene Jo Hall2005-11-181-1/+1
| | | | | | | | | The driver dependencies on PCI have been removed. This patch clears that up in the Kconfig file Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 15:19:14 +0100