summaryrefslogtreecommitdiffstats
path: root/drivers/clk/at91/clk-sam9x60-pll.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clk: at91: sam9x7: add support for HW PLL freq dividersVarshini Rajendran2024-08-071-2/+28
| | | | | | | | | | | | | | | | | | | | | Add support for hardware dividers for PLL IDs in sam9x7 SoC. The system PLL - PLLA and the system PLL divided by 2 - PLLADIV2 with PLL ID 0 and 4 respectively, both have a hardware divider /2. This has to be taken into account in the software to obtain the right frequencies. Support for the same is added in the PLL driver. fcorepllack -----> HW Div = 2 -+--> fpllack | +--> HW Div = 2 ---> fplladiv2ck In this case the corepll freq is 1600 MHz. So, the plla freq is 800 MHz after the hardware divider and the plladiv2 freq is 400 MHz after the hardware divider (given that the DIVPMC is 0). Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20240729070746.1990805-1-varshini.rajendran@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
* clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputsVarshini Rajendran2024-08-071-6/+6
| | | | | | | | | | | | | SAM9X7 SoC family supports different core output frequencies for different PLL IDs. To handle the same in the PLL driver, a separate parameter core_output is added. The sam9x60 and sama7g5 SoC PMC drivers are aligned to the PLL driver by adding the core output freq range in the PLL characteristics configurations. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20240729070737.1990756-1-varshini.rajendran@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
* clk: at91: clk-sam9x60-pll: add support for parent_hwClaudiu Beznea2023-06-211-5/+12
| | | | | | | | | | | | | | Add support for parent_hw in SAM9X60 PLL clock drivers. With this parent-child relation is described with pointers rather than strings making registration a bit faster. All the SoC based drivers that rely on clk-sam9x60-pll were adapted to the new API change. The switch itself for SoCs will be done in subsequent patches. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20230615093227.576102-9-claudiu.beznea@microchip.com
* clk: at91: clk-sam9x60-pll: fix return value checkClaudiu Beznea2023-03-061-1/+1
| | | | | | | | | | | sam9x60_frac_pll_compute_mul_frac() can't return zero. Remove the check against zero to reflect this. Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230227105931.2812412-1-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: clk-sam9x60-pll: add notifier for div part of PLLClaudiu Beznea2021-10-271-23/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts: one fractional part and one divider. On SAMA7G5 the CPU PLL could be changed at run-time to implement DVFS. The hardware clock tree on SAMA7G5 for CPU PLL is as follows: +---- div1 ----------------> cpuck | FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0 The div1 block is not implemented in Linux; on prescaler block it has been discovered a bug on some scenarios and will be removed from Linux in next commits. Thus, the final clock tree that will be used in Linux will be as follows: +-----------> cpuck | FRAC PLL ---> DIV PLL -+-> div0 ---> mck0 It has been proposed in [1] to not introduce a new CPUFreq driver but to overload the proper clock drivers with proper operation such that cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement clock notifiers which applies safe dividers before FRAC PLL is changed. The current commit treats only the DIV PLL by adding a notifier that sets a safe divider on PRE_RATE_CHANGE events. The safe divider is provided by initialization clock code (sama7g5.c). The div0 is treated in next commits (to keep the changes as clean as possible). [1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/ Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-12-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULLClaudiu Beznea2021-10-271-2/+2
| | | | | | | | | | | | Use DIV_ROUND_CLOSEST_ULL() to avoid any inconsistency b/w the rate computed in sam9x60_frac_pll_recalc_rate() and the one computed in sam9x60_frac_pll_compute_mul_frac(). Fixes: 43b1bb4a9b3e1 ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-8-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: re-factor clocks suspend/resumeClaudiu Beznea2021-10-271-4/+64
| | | | | | | | | | | | | | | | | | | | | | | | | SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this mode is done with the help of bootloader. Peripherals are not aware of the power saving mode thus most of them are disabling clocks in proper suspend API and re-enable them in resume API without taking into account the previously setup rate. Moreover some of the peripherals are acting as wakeup sources and are not disabling the clocks in this scenario, when suspending. Since backup mode cuts the power for peripherals, in resume part these clocks needs to be re-configured. The initial PMC suspend/resume code was designed only for SAMA5D2's PMC (as it was the only one supporting backup mode). SAMA7G supports also backup mode and its PMC is different (few new functionalities, different registers offsets, different offsets in registers for each functionalities). To address both SAMA5D2 and SAMA7G5 PMC add .save_context()/.resume_context() support to each clocks driver and call this from PMC driver. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea2020-12-191-18/+127
| | | | | | | | | Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: clk-sam9x60-pll: remove unused variableClaudiu Beznea2020-10-141-2/+1
| | | | | | | | | | Fix variable set but not used compilation warning. Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputsClaudiu Beznea2020-07-241-173/+374
| | | | | | | | | | | | | Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: sam9x60-pll: use frac when setting frequencyClaudiu Beznea2020-07-241-4/+8
| | | | | | | | | | | | In commit a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") the fractional part of PLL wasn't set on registers but it was calculated and taken into account for determining div and mul (see sam9x60_pll_get_best_div_mul()). Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: sam9x60-pll: check fcore against rangesClaudiu Beznea2020-07-241-1/+11
| | | | | | | | | | | | | According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: sam9x60-pll: use logical or for range checkClaudiu Beznea2020-07-241-1/+1
| | | | | | | | | | | | Use logical or for range check. In case bestrate is not in characteristics->output[0].min..characteristics->output[0].max range we should return -ERANGE. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: clk-sam9x60-pll: fix mul maskClaudiu Beznea2020-07-241-1/+1
| | | | | | | | | | According to datasheet mul mask is on bits 31..24. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: move sam9x60's PLL register offsets to PMC headerClaudiu Beznea2020-02-181-54/+37
| | | | | | | | | | | Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
* clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default valueEugen Hristev2020-01-061-2/+6
| | | | | | | | | | | Product datasheet recommends different values for UPLL and PLLA analog control register. Adapt accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1573478913-19737-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: at91: add sam9x60 PLL driverAlexandre Belloni2019-04-251-0/+330
The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 20:55:57 +0100