summaryrefslogtreecommitdiffstats
path: root/drivers/clk/davinci (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clk: da8xx: clk48: Switch to determine_rateMaxime Ripard2023-06-091-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TI DA8xx USB0 clk48 clocks implements a mux with a set_parent hook, but doesn't provide a determine_rate implementation. This is a bit odd, since set_parent() is there to, as its name implies, change the parent of a clock. However, the most likely candidate to trigger that parent change is a call to clk_set_rate(), with determine_rate() figuring out which parent is the best suited for a given rate. The other trigger would be a call to clk_set_parent(), but it's far less used, and it doesn't look like there's any obvious user for that clock. So, the set_parent hook is effectively unused, possibly because of an oversight. However, it could also be an explicit decision by the original author to avoid any reparenting but through an explicit call to clk_set_parent(). The driver does implement round_rate() though, which means that we can change the rate of the clock, but we will never get to change the parent. However, It's hard to tell whether it's been done on purpose or not. Since we'll start mandating a determine_rate() implementation, let's convert the round_rate() implementation to a determine_rate(), which will also make the current behavior explicit. And if it was an oversight, the clock behaviour can be adjusted later on. Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-57-971d5077e7d2@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: da8xx-cfgchip: Add a determine_rate hookMaxime Ripard2023-06-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Davinci DA8xxx cfgchip "clk48" clock implements a mux with a set_parent hook, but doesn't provide a determine_rate implementation. This is a bit odd, since set_parent() is there to, as its name implies, change the parent of a clock. However, the most likely candidates to trigger that parent change are either the assigned-clock-parents device tree property or a call to clk_set_rate(), with determine_rate() figuring out which parent is the best suited for a given rate. The other trigger would be a call to clk_set_parent(), but it's far less used, and it doesn't look like there's any obvious user for that clock. Similarly, it doesn't look like the device tree using that clock driver uses any of the assigned-clock properties on that clock. So, the set_parent hook is effectively unused, possibly because of an oversight. However, it could also be an explicit decision by the original author to avoid any reparenting but through an explicit call to clk_set_parent(). The latter case would be equivalent to setting the determine_rate implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no determine_rate implementation is provided, clk_round_rate() (through clk_core_round_rate_nolock()) will call itself on the parent if CLK_SET_RATE_PARENT is set, and will not change the clock rate otherwise. And if it was an oversight, then we are at least explicit about our behavior now and it can be further refined down the line. Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-25-971d5077e7d2@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: da8xx-cfgchip: Add a determine_rate hookMaxime Ripard2023-06-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Davinci DA8xxx cfgchip mux clock implements a mux with a set_parent hook, but doesn't provide a determine_rate implementation. This is a bit odd, since set_parent() is there to, as its name implies, change the parent of a clock. However, the most likely candidates to trigger that parent change are either the assigned-clock-parents device tree property or a call to clk_set_rate(), with determine_rate() figuring out which parent is the best suited for a given rate. The other trigger would be a call to clk_set_parent(), but it's far less used, and it doesn't look like there's any obvious user for that clock. However, the upstream device trees seem to use assigned-clock-parents on that clock to force the parent at boot time, so it's likely that the author intent was to force the parent through the device tree and prevent any reparenting but through an explicit call to clk_set_parent(). This case would be equivalent to setting the determine_rate implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no determine_rate implementation is provided, clk_round_rate() (through clk_core_round_rate_nolock()) will call itself on the parent if CLK_SET_RATE_PARENT is set, and will not change the clock rate otherwise. Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-24-971d5077e7d2@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: remove davinci dm3xx driversArnd Bergmann2023-01-125-427/+0
| | | | | | | | | | | | The davinci dm3xx machines are all removed, so the clk driver is no longer needed. The da8xx platforms are now using DT exclusively, so those drivers remain untouched. Reviewed-by: David Lechner <david@lechnology.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: davinci: drop DAVINCI_DMxxx referencesArnd Bergmann2023-01-124-26/+0
| | | | | | | | Support for all the dm3xx/dm64xx SoCs is no longer available, so drop all other references to those. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
*-. Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' ↵Stephen Boyd2022-10-042-3/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into clk-next - More devm helpers for fixed rate registration - Add Spreadtrum UMS512 SoC clk support - Various PXA168 clk driver fixes * clk-fixed-rate: clk: fixed-rate: add devm_clk_hw_register_fixed_rate clk: asm9260: use parent index to link the reference clock * clk-spreadtrum: clk: sprd: Add clocks support for UMS512 * clk-pxa: clk: pxa: add a check for the return value of kzalloc() clk: mmp: pxa168: control shared SDH bits with separate clock dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks clk: mmp: pxa168: add clocks for SDH2 and SDH3 dt-bindings: marvell,pxa168: add clock id for SDH3 clk: mmp: pxa168: fix GPIO clock enable bits clk: mmp: pxa168: add muxes for more peripherals clk: mmp: pxa168: fix incorrect parent clocks clk: mmp: pxa168: fix const-correctness clk: mmp: pxa168: add new clocks for peripherals dt-bindings: marvell,pxa168: add clock ids for additional dividers clk: mmp: pxa168: fix incorrect dividers clk: mmp: pxa168: add additional register defines * clk-ti: clk: davinci: cfgchip: Use dev_err_probe() helper clk: davinci: pll: fix spelling typo in comment MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER
| | * clk: davinci: cfgchip: Use dev_err_probe() helperYang Yingliang2022-09-301-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220913032228.985852-1-yangyingliang@huawei.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: davinci: pll: fix spelling typo in commentJiangshan Yi2022-09-301-1/+1
| |/ | | | | | | | | | | | | | | | | | | Fix spelling typo in comment. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Link: https://lore.kernel.org/r/20220905065833.1831473-1-13667453960@163.com Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* / clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646xLukas Bulwahn2022-09-019-363/+0
|/ | | | | | | | | | | | | | Commit 7dd33764486d ("ARM: davinci: Delete DM644x board files") and commit b4aed01de486 ("ARM: davinci: Delete DM646x board files") removes the support for DaVinci DM644x and DM646x boards. Hence, remove the PLL and PSC clock descriptions for those boards as well. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220720082934.17741-1-lukas.bulwahn@gmail.com Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2020-10-221-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This contains no changes to the core framework. It is a collection of various clk driver updates. The biggest driver updates in terms of lines of code is the Allwinner driver, closely followed by the Qualcomm and Mediatek drivers. All of those hit high because we add so many lines of clk data. Coming in fourth place is i.MX which also adds a bunch of clk data. This accounts for the new driver additions this time around. Otherwise the patches are lots of little cleanups and fixes for various clk drivers that have baked in linux-next for a while. I suppose one highlight or theme is that more clk drivers are being updated to work as modules, which is interesting to see such critical SoC infrastructure work as a loadable module. New Drivers: - Support qcom SM8150/SM8250 video and display clks - Support Mediatek MT8167 clks - Add clock for CRC block found on vf610 SoCs - Add support for the Renesas R-Car V3U (R8A779A0) SoC - Add support for the VSP for Resizing clock on Renesas RZ/G1H - Support Allwinner A100 SoC clks Removed Drivers: - Remove i.MX21 clock driver, as i.MX21 platform support is being dropped Updates: - Change how qcom's display port clks work - Small non-critical fixes for TI clk driver - Remove various unused variables in clk drivers - Allow Rockchip clk driver to be a module - Remove most __clk_lookup() calls in Samsung drivers (yay!) - Support building i.MX ARMv8 platforms clock driver as module - Some kerneldoc fixes here and there - A couple of minor i.MX clk data corrections - Update audio clock inverter and fdiv2 flag on Amlogic g12 - Make amlogic clk drivers configurable in Kconfig - Fix Renesas VSP clock names to match corrected hardware documentation - Sigma-delta modulation on Allwinner R40 - Various fixes for at91 clk driver - Use semicolons instead of commas in some places - Mark some variables const so they can move to RO memory" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits) clk: imx8mq: Fix usdhc parents order clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: Restrict CLK_HSDK to ARC_SOC_HSDK clk: at91: sam9x60: support only two programmable clocks clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks clk: bcm2835: add missing release if devm_clk_hw_register fails clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name clk: clk-prima2: fix return value check in prima2_clk_init() clk: mmp2: Fix the display clock divider base clk: pxa: Constify static struct clk_ops clk: baikal-t1: Mark Ethernet PLL as critical clk: qoriq: modify MAX_PLL_DIV to 32 clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers ...
| * clk: davinci: add missing kerneldocKrzysztof Kozlowski2020-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add missing kerneldoc to fix compile warning: drivers/clk/davinci/da8xx-cfgchip.c:578: warning: Function parameter or member 'dev' not described in 'da8xx_cfgchip_register_usb1_clk48' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: David Lechner <david@lechnology.com> Link: https://lore.kernel.org/r/20200916161740.14173-3-krzk@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | clk: davinci: Use the correct size when allocating memoryChristophe JAILLET2020-08-191-1/+1
|/ | | | | | | | | | | 'sizeof(*pllen)' should be used in place of 'sizeof(*pllout)' to avoid a small over-allocation. Fixes: 2d1726915159 ("clk: davinci: New driver for davinci PLL clocks") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200809144959.747986-1-christophe.jaillet@wanadoo.fr Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-07-281-1/+1
| | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200727201122.GA2593@embeddedor Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: use devm_platform_ioremap_resource() to simplify codeYueHaibing2019-10-172-6/+2
| | | | | | | | | Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20191014144407.23264-1-yuehaibing@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: pll: Add of_node_put() in of_davinci_pll_init()Nishka Dasgupta2019-08-081-1/+4
| | | | | | | | | | | | The variable child in the function of_davinci_pll_init takes the value of of_get_child_by_name, which gets a node but does not put it. If child is not put before the function returns it may cause a memory leak. Hence put child before two return statements. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lkml.kernel.org/r/20190804162824.6338-1-nishkadg.linux@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: Remove io.h from clk-provider.hStephen Boyd2019-05-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
*-. Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd2019-05-072-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
| | * clk: davinci: Use the correct style for SPDX License IdentifierNishad Kamdar2019-05-012-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Davinci Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* / clk: davinci: cfgchip: use PTR_ERR_OR_ZERO in da8xx_cfgchip_register_div4p5Ding Xiang2019-04-111-3/+1
|/ | | | | | | use PTR_ERR_OR_ZERO inetead of return code Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: kill davinci_clk_reset_assert/deassert()Bartosz Golaszewski2018-10-021-18/+0
| | | | | | | | This code is no longer used. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2018-08-235-6/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 32-bit SoC platform updates from Olof Johansson: "Most of the SoC updates in this cycle are cleanups and moves to more modern infrastructure: - Davinci was moved to common clock framework - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the keyboard interface (bitbanged AT keyboard via GPIO). - Removal of some stale code for Renesas platforms - Power management improvements for i.MX6LL" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits) ARM: uniphier: select RESET_CONTROLLER arm64: uniphier: select RESET_CONTROLLER ARM: uniphier: remove empty Makefile ARM: exynos: Clear global variable on init error path ARM: exynos: Remove outdated maintainer information ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15 ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill soc: r9a06g032: don't build SMP files for non-SMP config ARM: shmobile: Add the R9A06G032 SMP enabler driver ARM: at91: pm: configure wakeup sources for ULP1 mode ARM: at91: pm: add PMC fast startup registers defines ARM: at91: pm: Add ULP1 mode support ARM: at91: pm: Use ULP0 naming instead of slow clock ARM: hisi: handle of_iomap and fix missing of_node_put ARM: hisi: check of_iomap and fix missing of_node_put ARM: hisi: fix error handling and missing of_node_put ARM: mx5: Set the DBGEN bit in ARM_GPC register ARM: imx51: Configure M4IF to avoid visual artifacts ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll ARM: imx: fix i.MX6SLL build ...
| * clk: davinci: psc-da830: add a lookup entry for aemif clockBartosz Golaszewski2018-07-061-1/+2
| | | | | | | | | | | | | | | | | | We want to use the ti-aemif platform driver for da830-evm. To make it work we need a lookup entry for the aemif clock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>
| * clk: davinci: psc-dm646x: use two lookup entries for the aemif clockBartosz Golaszewski2018-07-061-1/+2
| | | | | | | | | | | | | | | | | | We want to be able to get the clock both from the board file by its con_id and from the aemif driver by dev_id. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>
| * clk: davinci: psc-dm644x: use two lookup entries for the aemif clockBartosz Golaszewski2018-07-061-1/+2
| | | | | | | | | | | | | | | | | | We want to be able to get the clock both from the board file by its con_id and from the aemif driver by dev_id. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>
| * clk: davinci: psc-dm365: use two lookup entries for the aemif clockBartosz Golaszewski2018-07-061-1/+2
| | | | | | | | | | | | | | | | | | We want to be able to get the clock both from the board file by its con_id and from the aemif driver by dev_id. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>
| * clk: davinci: psc-da850: remove the 'davinci_nand.0" lookupBartosz Golaszewski2018-07-061-2/+1
| | | | | | | | | | | | | | | | | | | | | | Since commit a8e3923ab571 ("mtd: rawnand: davinci: don't acquire and enable clock") we no longer acquire the aemif clock from the davinci nand driver - we only do it from the ti-aemif driver. Remove the nand entry from the psc lookup table. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: David Lechner <david@lechnology.com>
* | clk: davinci: fix a typo (which leads to build failures)Bartosz Golaszewski2018-06-261-1/+1
| | | | | | | | | | | | | | | | | | This should have been DM365, not DM356. Fixes: 4eff0bebf4ed5 ("clk: davinci: Fix link errors when not all SoCs are enabled") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David Lechner <david@lechnology.com>
* | clk: davinci: cfgchip: testing the wrong variableDan Carpenter2018-06-261-1/+1
|/ | | | | | | | | There is a copy and paste bug here. We should be testing "usb1" instead of "usb0". Fixes: 58e1e2d2cd89 ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Lechner <david@lechnology.com>
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2018-06-0915-186/+384
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
| *---. Merge branches 'clk-davinci-psc-da830', 'clk-renesas', 'clk-at91-recalc', ↵Stephen Boyd2018-06-0415-175/+380
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'clk-davinci' and 'clk-meson' into clk-next * clk-davinci-psc-da830: clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration * clk-renesas: clk: renesas: cpg-mssr: Add support for R-Car E3 clk: renesas: Add r8a77990 CPG Core Clock Definitions clk: renesas: rcar-gen2: Centralize quirks handling clk: renesas: r8a77980: Correct parent clock of PCIEC0 clk: renesas: r8a7794: Fix LB clock divider clk: renesas: r8a7792: Fix LB clock divider clk: renesas: r8a7791/r8a7793: Fix LB clock divider clk: renesas: r8a7745: Fix LB clock divider clk: renesas: r8a7743: Fix LB clock divider clk: renesas: cpg-mssr: Add r8a77470 support clk: renesas: Add r8a77470 CPG Core Clock Definitions clk: renesas: r8a77965: Add MSIOF controller clocks * clk-at91-recalc: clk: at91: PLL recalc_rate() now using cached MUL and DIV values * clk-davinci: clk: davinci: Fix link errors when not all SoCs are enabled clk: davinci: psc: allow for dev == NULL clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE clk: davinci: pll: allow dev == NULL clk: davinci: psc-dm365: fix few clocks clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups clk: davinci: pll-dm355: fix SYSCLKn parent names clk: davinci: pll-dm355: drop pll2_sysclk2 * clk-meson: clk: meson: axg: let mpll clocks round closest clk: meson: mpll: add round closest support clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL clk: meson: use SPDX license identifiers consistently clk: meson: drop CLK_SET_RATE_PARENT flag clk: meson-axg: Add AO Clock and Reset controller driver clk: meson: aoclk: refactor common code into dedicated file clk: meson: migrate to devm_of_clk_add_hw_provider API clk: meson: gxbb: add the video decoder clocks clk: meson: meson8b: add support for the NAND clocks dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock
| | | | * clk: davinci: Fix link errors when not all SoCs are enabledDavid Lechner2018-05-304-3/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes linker errors due to undefined symbols when one or more of the TI DaVinci SoCs is not enabled in the kernel config. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-10-david@lechnology.com
| | | | * clk: davinci: psc: allow for dev == NULLDavid Lechner2018-05-305-18/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some davinci SoCs, we need to register the PSC clocks during early boot because they are needed for clocksource/clockevent. These changes allow for dev == NULL because in this case, we won't have a platform device for the clocks. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-9-david@lechnology.com
| | | | * clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLAREDavid Lechner2018-05-303-6/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PLL0 on davinci/da850-type device needs to be registered early in boot because it is needed for clocksource/clockevent. Change the driver to use CLK_OF_DECLARE for this special case. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-8-david@lechnology.com
| | | | * clk: davinci: pll: allow dev == NULLDavid Lechner2018-05-308-137/+235
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This modifies the TI Davinci PLL clock driver to allow for the case when dev == NULL. On some (most) SoCs that use this driver, the PLL clock needs to be registered during early boot because it is used for clocksource/clkevent and there will be no platform device available. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-7-david@lechnology.com
| | | | * clk: davinci: psc-dm365: fix few clocksSekhar Nori2018-05-301-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix parent of EMAC and voice codec PSC clocks. Documentation is clear on EMAC clock parent, but its not fully clear on parent of voice codec clock. The implementation chosen is matches arch/arm/mach-davinci/dm365.c. Add a comment explaining this for posterity. There is only one power domain on DM365. Fix the power domain of voice codec and vpss dac modules. While at it, add a comment explaining how the parent of vpss dac clock was derived. Note that this patch does not touch the parent of vpss dac clock. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-6-david@lechnology.com
| | | | * clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabledSekhar Nori2018-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PLL2 SYSCLK1 on DM646x is connected to DDR2 PHY and cannot be disabled. Mark it so to prevent unused clock disable infrastructure from disabling it. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-5-david@lechnology.com
| | | | * clk: davinci: psc-dm355: fix ASP0/1 clkdev lookupsDavid Lechner2018-05-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clkdev lookups for the ASP0/1 devices on TI DM355 were declared, but not assigned to any LPSC. This assigns the clkdev lookups to the correct LPSCs. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-4-david@lechnology.com
| | | | * clk: davinci: pll-dm355: fix SYSCLKn parent namesDavid Lechner2018-05-301-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the parent clock names of the SYSCLKn clocks for the DM355 SoC in the TI DaVinici PLL clock driver. It appears that this name just didn't get updated to the correct name like the other SoCs during the driver's development. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-3-david@lechnology.com
| | | | * clk: davinci: pll-dm355: drop pll2_sysclk2David Lechner2018-05-301-4/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes pll2_sysclk2 from the TI DM355 clock driver. This SoC doesn't have such a clock. Also, SYSCLK_ALWAYS_ENABLED is transferred to pll2_sysclk1 since it drives the DDR and doesn't have another mechanism to keep it on. Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20180525181150.17873-2-david@lechnology.com
| | * / clk: davinci: psc-da830: fix USB0 48MHz PHY clock registrationSekhar Nori2018-05-161-1/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB0 48MHz PHY clock registration fails on DA830 because the da8xx-cfgchip clock driver cannot get a reference to USB0 LPSC clock. The USB0 LPSC needs to be enabled during PHY clock enable. Setup the clock lookup correctly to fix this. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * | clk: Return void from debug_init opStephen Boyd2018-06-021-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only have two users of the debug_init hook, and we recently stopped caring about the return value from that op. Finish that off by changing the clk_op to return void instead of int because it doesn't matter if debugfs fails or not. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * | clk: davinci: no need to check return value of debugfs_create functionsGreg Kroah-Hartman2018-06-021-6/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Acked-by: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* / treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook2018-06-061-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
* clk: davinci: add a reset lookup table for psc0Bartosz Golaszewski2018-04-062-0/+8
| | | | | | | | | In order to be able to use the reset framework in legacy boot mode as well, add the reset lookup table to the psc driver for da850 variant. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: Remove redundant dev_err callsWei Yongjun2018-03-232-6/+2
| | | | | | | | | | There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: cfgchip: Add TI DA8XX USB PHY clocksDavid Lechner2018-03-201-0/+351
| | | | | | | | | | | | | This adds a new driver for the USB PHY clocks in the CFGCHIP2 syscon register on TI DA8XX-type SoCs. The USB0 (USB 2.0) PHY clock is an interesting case because it calls clk_enable() in a reentrant way. The USB 2.0 PSC only has to be enabled temporarily while we are locking the PLL, which takes place during the clk_enable() callback. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: New driver for TI DA8XX CFGCHIP clocksDavid Lechner2018-03-202-0/+441
| | | | | | | | This adds a new driver for the gate and multiplexer clocks in the CFGCHIPn syscon registers on TI DA8XX-type SoCs. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: Add platform information for TI DM646x PSCDavid Lechner2018-03-204-0/+83
| | | | | | | | This adds platform-specific declarations for the PSC clocks on TI DM646x based systems. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: Add platform information for TI DM644x PSCDavid Lechner2018-03-204-0/+86
| | | | | | | | This adds platform-specific declarations for the PSC clocks on TI DM644x based systems. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: davinci: Add platform information for TI DM365 PSCDavid Lechner2018-03-204-0/+99
| | | | | | | | | This adds platform-specific declarations for the PSC clocks on TI DM365 based systems. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 15:00:10 +0100