summaryrefslogtreecommitdiffstats
path: root/drivers/clk/st (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clk: st: flexgen: Switch to determine_rateMaxime Ripard2023-06-091-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ST Flexgen clocks implements a mux with a set_parent hook, but doesn't provide a determine_rate implementation. This is a bit odd, since set_parent() is there to, as its name implies, change the parent of a clock. However, the most likely candidate to trigger that parent change is a call to clk_set_rate(), with determine_rate() figuring out which parent is the best suited for a given rate. The other trigger would be a call to clk_set_parent(), but it's far less used, and it doesn't look like there's any obvious user for that clock. So, the set_parent hook is effectively unused, possibly because of an oversight. However, it could also be an explicit decision by the original author to avoid any reparenting but through an explicit call to clk_set_parent(). The driver does implement round_rate() though, which means that we can change the rate of the clock, but we will never get to change the parent. However, It's hard to tell whether it's been done on purpose or not. Since we'll start mandating a determine_rate() implementation, let's convert the round_rate() implementation to a determine_rate(), which will also make the current behavior explicit. And if it was an oversight, the clock behaviour can be adjusted later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-62-971d5077e7d2@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: Fix memory leak in st_of_quadfs_setup()Xiu Jianfeng2022-12-081-2/+3
| | | | | | | | | | If st_clk_register_quadfs_pll() fails, @lock should be freed before goto @err_exit, otherwise will cause meory leak issue, fix it. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20221122133614.184910-1-xiujianfeng@huawei.com Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: Hold reference returned by of_get_parent()Liang He2022-08-192-2/+8
| | | | | | | | | | | | We should hold the reference returned by of_get_parent() and use it to call of_node_put() for refcount balance. Fixes: 3efe64ef5186 ("clk: st: clkgen-fsyn: search reg within node or parent") Fixes: 810251b0d36a ("clk: st: clkgen-mux: search reg within node or parent") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220628142416.169808-1-windhl@126.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-mux: search reg within node or parentAlain Volmat2022-01-061-2/+9
| | | | | | | | | | | | | | | In order to avoid having duplicated addresses within the DT, only have one unit-address per clockgen and each driver within the clockgen should look at the parent node (overall clockgen) to figure out the reg property. Such behavior is already in place in other STi platform clock drivers such as clk-flexgen and clkgen-pll. Keep backward compatibility by first looking at reg within the node before looking into the parent node. Signed-off-by: Alain Volmat <avolmat@me.com> Link: https://lore.kernel.org/r/20211218211157.188214-3-avolmat@me.com Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-fsyn: search reg within node or parentAlain Volmat2022-01-061-2/+11
| | | | | | | | | | | | | | | In order to avoid having duplicated addresses within the DT, only have one unit-address per clockgen and each driver within the clockgen should look at the parent node (overall clockgen) to figure out the reg property. Such behavior is already in place in other STi platform clock drivers such as clk-flexgen and clkgen-pll. Keep backward compatibility by first looking at reg within the node before looking into the parent node. Signed-off-by: Alain Volmat <avolmat@me.com> Link: https://lore.kernel.org/r/20211218211157.188214-2-avolmat@me.com Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-fsyn: embed soc clock outputs within compatible dataAlain Volmat2021-06-281-12/+101
| | | | | | | | | | | | | | | | In order to avoid relying on the old style description via the DT clock-output-names, add compatible data describing the flexgen outputs clocks for all STiH407/STiH410 and STiH418 SOCs. In order to ease transition between the two methods, this commit introduce the new compatible without removing the old method. Once DTs will be fixed, the method relying on DT clock-output-names will be removed from this driver as well as old compatibles. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210331201632.24530-7-avolmat@me.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-pll: embed soc clock outputs within compatible dataAlain Volmat2021-06-281-14/+106
| | | | | | | | | | | | | | | | In order to avoid relying on the old style description via the DT clock-output-names, add compatible data describing the flexgen outputs clocks for all STiH407/STiH410 and STiH418 SOCs. In order to ease transition between the two methods, this commit introduce the new compatible without removing the old method. Once DTs will be fixed, the method relying on DT clock-output-names will be removed from this driver as well as old compatibles. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210331201632.24530-5-avolmat@me.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: flexgen: embed soc clock outputs within compatible dataAlain Volmat2021-06-281-14/+353
| | | | | | | | | | | | | | | | In order to avoid relying on the old style description via the DT clock-output-names, add compatible data describing the flexgen outputs clocks for all STiH407/STiH410 and STiH418 SOCs. In order to ease transition between the two methods, this commit introduce the new compatible without removing the old method. Once DTs will be fixed, the method relying on DT clock-output-names will be removed from this driver as well as old compatibles. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210331201632.24530-3-avolmat@me.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-pll: remove unused variable of struct clkgen_pllAlain Volmat2021-06-281-1/+0
| | | | | | | | | | ODF field within the struct clkgen_pll is never used by the driver and can thus be removed. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210331201632.24530-2-avolmat@me.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially ↵Lee Jones2021-02-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | filled one Fixes the following W=1 kernel build warning(s): drivers/clk/st/clkgen-fsyn.c:186: warning: Function parameter or member 'data' not described in 'st_clk_quadfs_pll' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'regs_base' not described in 'st_clk_quadfs_fsynth' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'lock' not described in 'st_clk_quadfs_fsynth' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'data' not described in 'st_clk_quadfs_fsynth' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'chan' not described in 'st_clk_quadfs_fsynth' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'md' not described in 'st_clk_quadfs_fsynth' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'pe' not described in 'st_clk_quadfs_fsynth' drivers/clk/st/clkgen-fsyn.c:466: warning: Function parameter or member 'sdiv' not described in 'st_clk_quadfs_fsynth' Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Stephen Gallimore <stephen.gallimore@st.com> Cc: Pankaj Dev <pankaj.dev@st.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-13-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: clkgen-pll: Demote unpopulated kernel-doc headerLee Jones2021-02-111-2/+1
| | | | | | | | | | | | | | | | | And remove an incorrect entry. Fixes the following W=1 kernel build warning(s): drivers/clk/st/clkgen-pll.c:142: warning: cannot understand function prototype: 'struct clkgen_pll ' Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Stephen Gallimore <stephen.gallimore@st.com> Cc: Pankaj Dev <pankaj.dev@st.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210120093040.1719407-12-lee.jones@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: Remove uninitialized_var() usageKees Cook2020-07-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just remove this variable since it was actually unused: drivers/clk/st/clkgen-fsyn.c: In function ‘quadfs_set_rate’: drivers/clk/st/clkgen-fsyn.c:793:6: warning: unused variable ‘i’ [-Wunused-variable] 793 | int i; | ^ [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: 5f7aa9071e93 ("clk: st: Support for QUADFS inside ClockGenB/C/D/E/F") Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
* clk: clk-flexgen: fix clock-critical handlingAlain Volmat2020-05-271-0/+1
| | | | | | | | | | | Fixes an issue leading to having all clocks following a critical clocks marked as well as criticals. Fixes: fa6415affe20 ("clk: st: clk-flexgen: Detect critical clocks") Signed-off-by: Alain Volmat <avolmat@me.com> Link: https://lkml.kernel.org/r/20200322140740.3970-1-avolmat@me.com Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
*-. Merge branches 'clk-aspeed', 'clk-unused', 'clk-of-node-put', ↵Stephen Boyd2019-09-203-14/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'clk-const-bulk-data' and 'clk-debugfs' into clk-next - Add SDIO gate to aspeed driver - Support aspeed AST2600 SoC - Add missing of_node_put() calls in various clk drivers - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs * clk-aspeed: clk: Add support for AST2600 SoC clk: aspeed: Move structures to header clk: aspeed: Add SDIO gate * clk-unused: clk: st: clkgen-pll: remove unused variable 'st_pll3200c32_407_a0' clk: st: clkgen-fsyn: remove unused variable 'st_quadfs_fs660c32_ops' clk: composite: Drop unused clk.h include clk: Si5341/Si5340: remove redundant assignment to n_den clk: qoriq: Fix -Wunused-const-variable * clk-of-node-put: clk: ti: dm814x: Add of_node_put() to prevent memory leak clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup() clk: davinci: pll: Add of_node_put() in of_davinci_pll_init() clk: versatile: Add of_node_put() in cm_osc_setup() * clk-const-bulk-data: clk: Constify struct clk_bulk_data * where possible * clk-debugfs: clk: Drop !clk checks in debugfs dumping clk: Use seq_puts() in possible_parent_show() clk: Assert prepare_lock in clk_core_get_boundaries clk: Add clk_min/max_rate entries in debugfs
| | * clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup()Nishka Dasgupta2019-08-081-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | In function st_of_flexgen_setup, variable pnode takes the return value of of_get_parent, which gets a node but does not put it. If pnode is not put before the function returns, it may cause a memory leak. Hence put pnode after its last occurrence. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lkml.kernel.org/r/20190804163151.6511-1-nishkadg.linux@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * clk: st: clkgen-pll: remove unused variable 'st_pll3200c32_407_a0'YueHaibing2019-09-061-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | drivers/clk/st/clkgen-pll.c:64:37: warning: st_pll3200c32_407_a0 defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20190816135523.73520-1-yuehaibing@huawei.com Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * clk: st: clkgen-fsyn: remove unused variable 'st_quadfs_fs660c32_ops'YueHaibing2019-09-061-1/+0
|/ | | | | | | | | | | | | drivers/clk/st/clkgen-fsyn.c:70:29: warning: st_quadfs_fs660c32_ops defined but not used [-Wunused-const-variable=] It is never used, so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lkml.kernel.org/r/20190816135341.52248-1-yuehaibing@huawei.com Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194Thomas Gleixner2019-05-301-1/+2
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): license terms gnu general public license gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-302-12/+2
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: Remove io.h from clk-provider.hStephen Boyd2019-05-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: st: Remove usage of CLK_IS_BASICStephen Boyd2018-12-103-4/+4
| | | | | | | | This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk: Convert to using %pOFn instead of device_node.nameRob Herring2018-08-301-1/+1
| | | | | | | | | | | | | | | In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-132-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: st: clk-flexgen: Unmap region obtained by of_iomapArvind Yadav2016-12-091-1/+4
| | | | | | | Free memory mapping, if probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Handle clk synchronous mode for video clocksGabriel Fernandez2016-09-171-2/+35
| | | | | | | | | | This patch configures the semi-synchronous mode of the video clocks of clkgenD2. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Add clock propagation for audio clocksGabriel Fernandez2016-09-171-1/+25
| | | | | | | | | | This patch allows fine tuning of the quads FS for audio clocks accuracy. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Add fs660c32 synthesizer algorithmGabriel Fernandez2016-09-171-69/+111
| | | | | | | | | | | Use an algorithm instead of a table to compute clocks for fs660c32 synthesizer. During a video playback we need to adjust audio & video frequencies. A table can't cover all HDMI resolutions and audio adjustment. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Simplify clock binding of STiH4xx platformsGabriel Fernandez2016-09-173-77/+55
| | | | | | | | | | This patch reworks the clock binding to avoid too much detail in DT. Now we have only compatible string per type of clock (remark from Rob https://lkml.org/lkml/2016/5/25/492) Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Remove stih415-416 clock supportGabriel Fernandez2016-09-173-1404/+1
| | | | | | | | | | STiH415 and STiH416 platforms are no longer used. these platforms will be deprecated for the next kernel. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: clkgen-pll: Detect critical clocksLee Jones2016-06-301-10/+17
| | | | | | | | | | | | Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. Clocks are marked as CRITICAL using clk flags. This patch also ensures flags are peculated through the framework in the correct manner. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: clkgen-fsyn: Detect critical clocksLee Jones2016-06-301-3/+7
| | | | | | | | | | | | Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. Clocks are marked as CRITICAL using clk flags. This patch also ensures flags are peculated through the framework in the correct manner. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: clk-flexgen: Detect critical clocksLee Jones2016-06-301-1/+3
| | | | | | | | | | | Utilise the new Critical Clock infrastructure to mark clocks which much not be disabled as CRITICAL. While we're at it, reduce the coverage of the flex_flags variable, since it's only really used in a single for() loop. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: Remove impossible check for of_clk_get_parent_count() < 0Stephen Boyd2016-02-272-4/+4
| | | | | | | | | The checks for < 0 are impossible now that of_clk_get_parent_count() returns an unsigned int. Simplify the code and update the types. Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: avoid uninitialized variable useArnd Bergmann2016-01-301-2/+6
| | | | | | | | | | | | | | | | | | My previous patch fixed some warnings about printing a couple of variables that are always uninitialized in quadfs_pll_fs660c32_set_rate(), but I now got a warning that only shows up in some configurations (i.e. without gcc -Os) about the params.ndiv being used uninitialized in the error case: drivers/clk/st/clkgen-fsyn.c: In function 'quadfs_pll_fs660c32_set_rate': drivers/clk/st/clkgen-fsyn.c:584:75: warning: 'params.ndiv' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/st/clkgen-fsyn.c:574:16: note: 'params.ndiv' was declared here This changes the error handling so we bail for invalid arguments rather than continuing with uninitialized data. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: move the common clock's to_clk_*(_hw) macros to clk-provider.hGeliang Tang2016-01-291-5/+4
| | | | | | | | | | to_clk_*(_hw) macros have been repeatedly defined in many places. This patch moves all the to_clk_*(_hw) definitions in the common clock framework to public header clk-provider.h, and drop the local definitions. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: avoid uninitialized variable useArnd Bergmann2015-11-201-8/+9
| | | | | | | | | | | | | | | | | | | | | quadfs_pll_fs660c32_round_rate prints a few structure members that are never initialized, and also doesn't print the only one it cares about. We get a gcc warning about the ones that are printed: clk/st/clkgen-fsyn.c:560:93: warning: 'params.sdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.mdiv' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.pe' may be used uninitialized in this function clk/st/clkgen-fsyn.c:560:93: warning: 'params.nsdiv' may be used uninitialized in this function This changes the code to no longer print uninitialized data, and for good measure it also prints the ndiv member that is being set. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5f7aa9071e93 ("clk: st: Support for QUADFS inside ClockGenB/C/D/E/F") Acked-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Correct the pll-type for A9 for stih418Gabriel Fernandez2015-10-091-0/+194
| | | | | | | | | | | Add support for new PLL-type for stih418 A9-PLL. Currently the 407_A9_PLL type being used, it is corrected with this patch 4600c28 PLL allows to reach higher frequencies so its programming algorithm is extended. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: PLL rate change implementation for DVFSGabriel Fernandez2015-10-093-10/+216
| | | | | | | | | | Change A9 PLL rate, as per requirement from the cpufreq framework, for DVFS. For rate change, the A9 clock needs to be temporarily sourced from PLL external to A9 and then sourced back to A9-PLL Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Support for enable/disable in Clockgen PLLsGabriel Fernandez2015-10-091-1/+59
| | | | | | | | | The patch adds support for enable/disable of the Clockgen PLLs. clkgen_pll_enable/clkgen_pll_disable added as generic function for all PLLs. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: st: fix handling result of of_property_count_stringsAndrzej Hajda2015-10-021-3/+4
| | | | | | | | | | | | The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers: clk: st: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_xGabriel Fernandez2015-09-172-10/+10
| | | | | | | | | | Use a generic name for this kind of PLL Correction in dts files are already done here: commit 5eb26c605909 ("ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)Stephen Boyd2015-08-254-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the provider based method to get a clock's name so that we can get rid of the clk member in struct clk_hw one day. Mostly converted with the following coccinelle script. @@ struct clk_hw *E; @@ -__clk_get_name(E->clk) +clk_hw_get_name(E) Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@chromium.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: Convert __clk_get_flags() to clk_hw_get_flags()Stephen Boyd2015-08-251-1/+1
| | | | | | | | | | | | | | | | | | | Mostly converted with the following snippet: @@ struct clk_hw *E; @@ -__clk_get_flags(E->clk) +clk_hw_get_flags(E) Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd2015-07-284-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
| * clk: st: Include clk.hStephen Boyd2015-07-204-0/+4
| | | | | | | | | | | | | | | | This clock provider uses the consumer API, so include clk.h explicitly. Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | clk: st: make use of of_clk_parent_fill helper functionDinh Nguyen2015-07-282-9/+4
| | | | | | | | | | | | | | | | | | Use of_clk_parent_fill to fill in the parent clock names' array. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Tested-by Gabriel Fernandez <gabriel.fernandez@st.com> Cc: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | clk: st: Fix error paths and allocation styleStephen Boyd2015-07-141-38/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The error paths in this file leak memory and mappings and test for pointers being valid after dereferencing them. Fix these problems and properly free resources on errors. Fix some stylistic things too like using sizeof(*ptr) and fitting more code on a single line. Note that we don't unregister clocks here. That needs a clk_composite_unregister() API that we don't have right now. Acked-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 09:44:37 +0100