summaryrefslogtreecommitdiffstats
path: root/drivers/clk/sunxi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clk: sunxi: Add a common setup function for mmc module clocksChen-Yu Tsai2015-01-141-7/+19
| | | | | | | | | | | | The only difference between module clocks on different platforms is the width of the mux register bits and the valid values, which are passed in through struct factors_data. The phase clocks parts are identical. This patch generalizes the setup function, so most of the code can be reused when adding sun9i support, which has a wider mux register. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Remove custom phase functionMaxime Ripard2015-01-141-37/+0
| | | | | | | | | Now that we don't have any user left for our custom phase function, we can safely remove this hack from the code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Chen-Yu Tsai <wens@csie.org>
* clk: sunxi: Rework MMC phase clocksMaxime Ripard2015-01-141-62/+69
| | | | | | | | | | | | Instead of having three different clocks for the main MMC clock and the two phase sub-clocks, which involved having three different drivers sharing the same register, rework it to have the same single driver registering three different clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Mike Turquette <mturquette@linaro.org>
* clk: sunxi: Propagate rate changes to parent for mux clocksChen-Yu Tsai2015-01-061-1/+1
| | | | | | | | | | | | | | The cpu clock on sunxi machines is just a mux clock, which is normally fed by the main PLL, but can be muxed to the main or low power oscillator. Make the mux clock propagate rate changes to its parent, so we can change the clock rate of the PLL, and thus actually implement rate changing on the cpu clock. This patch also removes the no reparenting limit. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Make the mod0 clk driver also a platform driverHans de Goede2015-01-061-3/+40
| | | | | | | | | | | | | With the prcm in sun6i (and some later SoCs) some mod0 clocks are instantiated through the mfd framework, and as such do not work with of_clk_declare, since they do not have registers assigned to them yet at of_clk_declare init time. Silence the error on not finding registers in the of_clk_declare mod0 clk setup method, and also register mod0-clk support as a platform driver to work properly with mfd instantiated mod0 clocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Fix factor clocks usage for sun9i core clocksChen-Yu Tsai2014-12-211-6/+56
| | | | | | | | | | | | | The sunxi factor clocks usage was changed in clk: sunxi: Give sunxi_factors_register a registers parameter However the sun9i core clocks were not fixed up in that patch, resulting in breakage. This patch fixes that. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Give sunxi_factors_register a registers parameterHans de Goede2014-12-215-14/+51
| | | | | | | | | | | | | | | | | | | | Before this commit sunxi_factors_register uses of_iomap(node, 0) to get the clk registers. The sun6i prcm has factor clocks, for which we want to use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm factor clocks, because the prcm uses the mfd framework, so the registers are not part of the dt-node, instead they are added to the platform_device, as platform_device resources. This commit makes getting the registers the callers duty, so that sunxi_factors_register can be used with mfd instantiated platform device too. While at it also add error checking to the of_iomap calls. This commit also drops the __init function from sunxi_factors_register since platform driver probe functions are not __init. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-dividerChen-Yu Tsai2014-12-211-0/+208
| | | | | | | | | | This patch unifies the sun6i AHB1 clock, originally supported with separate mux and divider clks. It also adds support for the pre-divider on the PLL6 input, thus allowing the clock to be muxed to PLL6 with proper clock rate calculation. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Remove ahb1_sdram from sun6i/sun8i protected clocks listChen-Yu Tsai2014-12-211-1/+0
| | | | | | | | | | | | | | | The ahb1_sdram clock gate is only used for accessing the sdram controller's registers over the bus. It is not used for actually clock the controller or the dram, hence it does not need to be protected. This also gets rid of the problem when the protected ahb1_sdram gate is prepared/enabled while it is still an orphan, and the operation is not propagated to the correct parent. This was confirmed on my A23 tablet and my A31 Hummingbird. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: Change clk_ops->determine_rate to return a clk_hw as the best parentTomeu Vizoso2014-12-042-4/+4
| | | | | | | | This is in preparation for clock providers to not have to deal with struct clk. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
* clk: sunxi: gmac-tx-clk mux is not a CLK_MUX_INDEX_BIT muxHans de Goede2014-11-231-1/+6
| | | | | | | | | | | | | | | | | | | | | A CLK_MUX_INDEX_BIT mux has one bit per parent, but the sun7i-a20-gmac-clk has 2 bits selecting between 3 possible parents using values of 0, 1, 2, which makes it a regular mux which should not have CLK_MUX_INDEX_BIT set in its flag. However we do not support parent 1 (an external clock), so use a table to select parent 0 or 2, which are the 2 parents we support. Note this has not been causing any issues sofar, because we start with a parent setting of parent 0, and only ever re-parent to parent 2 (for which we use an index of 1 as we skip parent 1) and with CLK_MUX_INDEX_BIT set we write a value of 2 for index 1. Tested on both a cubietruck (which uses rgmii mode) as well as a cs908 (an a31s board which uses mii mode). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Implement A31 PLL6 as a divs clock for 2x outputChen-Yu Tsai2014-11-231-12/+16
| | | | | | | | | | | | | | | Some clock modules on the A31 use PLL6x2 as one of their inputs. This patch changes the PLL6 implementation for A31 to a divs clock, i.e. clock with multiple outputs that have different dividers. The first output will be the normal PLL6 output, and the second will be PLL6x2. This patch fixes the PLL6 N factor in the clock driver, and removes any /2 dividers in the PLL6 factors clock part. The N factor counts from 1 to 32, mapping to values 0 to 31, as shown in the A31 manual. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Specify number of child clocks for divs clocksChen-Yu Tsai2014-11-231-2/+9
| | | | | | | | | | | | | | | | Currently sunxi_divs_clk_setup assumes the number of child clocks to be the same as the number of clock-output-names, and a maximum of SUNXI_DIVS_MAX_QTY child clocks. On sun6i, PLL6 only has 1 child clock, but the parent would be used as well, thereby also having it's own clock-output-names entry. This results in an extra bogus clock being registered. This patch adds an entry for the number of child clocks alongside the data structures for them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Removed unused/incorrect sun6i-a31-apb2-clk driverChen-Yu Tsai2014-11-231-7/+0
| | | | | | | | | This driver does not match the hardware, which is actually compatible to sun4i-a10-apb1-clk. Since we've switch to the correct one, drop this driver. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: unify APB1 clockEmilio López2014-11-111-5/+2
| | | | | | | | | | This commit unifies the APB1 mux with the APB1 clock, using the new factors infrastructure. Signed-off-by: Emilio López <emilio@elopez.com.ar> [wens@csie.org: Add mux mask bits] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Add support for bus clock gates on Allwinner A80 SoCChen-Yu Tsai2014-10-211-0/+31
| | | | | | | This adds the gate clocks for AHB/APB busses on the A80 SoC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: Add support for A80 basic bus clocksChen-Yu Tsai2014-10-212-0/+272
| | | | | | | | | | | | | | | | | | The A80 SoC has 12 PLL clocks, 3 AHB clocks, 2 APB clocks, and a new "GT" bus, which I assume is some kind of data bus connecting the processor cores, memory and various busses. Also there is a bus clock for a ARM CCI400 module. As far as I can tell, the GT bus and CCI400 bus clock must be protected. This patch adds driver support for peripheral related PLLs and bus clocks on the A80. The GT and CCI400 clocks are added as well as these 2 along with the PLLs they are clocked from must not be disabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* clk: sunxi: make factors clock mux mask configurableChen-Yu Tsai2014-10-215-3/+5
| | | | | | | | | | | | Some of the factors-style clocks on the A80 have different widths for the mux values in the registers. Add a .muxmask field to clk_factors_config to make it configurable. Passing a bitmask instead of a width parameter will allow reuse in case we support table-based muxes in the future. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* Merge tag 'sunxi-clocks-for-3.18' of ↵Mike Turquette2014-09-276-156/+485
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Allwinner Clocks Additions for 3.18 The most important part of this serie is the addition of the phase API to handle the MMC clocks in the Allwinner SoCs. Apart from that, the A23 gained a new mbus driver, and there's a fix for a incorrect divider table on the APB0 clock.
| * clk: sunxi: Add sun8i MBUS clock supportChen-Yu Tsai2014-09-272-0/+79
| | | | | | | | | | | | | | | | | | The MBUS clock on sun8i is slightly different from the old mod0 clocks. The divider is 3 bits wider, while also needing a divider table for the higher 4 values, which all set the same divider. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: mod0: Introduce MMC proper phase handlingMaxime Ripard2014-09-271-0/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MMC clock we thought we had until now are actually not one but three different clocks. The main one is unchanged, and will have three outputs: - The clock fed into the MMC - a sample and output clocks, to deal with when should we output/sample data to/from the MMC bus The phase control we had are actually controlling the two latter clocks, but the main MMC one is unchanged. We can adjust the phase with a 3 bits value, from 0 to 7, 0 meaning a 180 phase shift, and the other values being the number of periods from the MMC parent clock to outphase the clock of. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * clk: sunxi: Move mbus to mod0 fileMaxime Ripard2014-09-272-57/+12
| | | | | | | | | | | | | | | | Move the MBUS clock to the module clocks file. It's pretty trivial, but still requires to enable the clocks to make sure it won't get disabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * clk: sunxi: Move mod0 clock to a file of its ownMaxime Ripard2014-09-273-1/+83
| | | | | | | | | | | | | | | | Since we know have the ability to declare factors clock outside of clk-sunxi, create a new mod0 driver to deal with the mod0 clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * clk: sunxi: Introduce mbus compatibleMaxime Ripard2014-09-271-0/+1
| | | | | | | | | | | | | | | | | | | | Even though the mbus clock is a regular module clock, given its nature, it needs to be enabled all the time. Introduce a new compatible, to differentiate it from the other module clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * clk: sunxi: factors: Invert the probing logicMaxime Ripard2014-09-273-99/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, the factors clock probing was done directly by sunxi_init_clocks, with the factors registration being called directly with the clocks data passed as an argument. This approch has shown its limits when we added more clocks, since we couldn't really split code with such a logic in smaller files, and led to a huge file having all the clocks. Introduce an intermediate probing function, so that factor clocks will be able to directly be called by CLK_OF_DECLARE, which will in turn ease the split into several files. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * clk: sunxi: add correct divider table for sun4i-apb0 clockChen-Yu Tsai2014-09-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sun4i-apb0 clock, as found on all platforms using it, is a power-of-two-based divider clock, with a special divider of 2 for value 0. This was causing the clock framework to incorrectly calculate the clock rate for apb1 and related modules on sun6i and sun8i. On sun[4/5/7]i, u-boot SPL configures the divider with value 1 for /2 divider, so no suprises there. This patch adds a proper divider table for it, so the correct clock rate can be calculated. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | clk: Remove .owner field for driverKiran Padwal2014-09-264-4/+0
|/ | | | | | | | | | | | | | There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: sunxi: staticize structures and arraysEmilio López2014-07-294-5/+5
| | | | | | | | | There are some structs and arrays on the driver that are not used anywhere else. Let's mark them as static. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: sunxi: add __iomem markings to MMIO pointersEmilio López2014-07-292-6/+6
| | | | | | | | | | This commit adds __iomem thoughout the sunxi clock driver, in places where it was ommited. This cleans most of the sparse warnings we are getting here. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* Merge tag 'sunxi-clocks-for-3.17' of ↵Mike Turquette2014-07-266-43/+227
|\ | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next-sunxi Allwinner clocks additions for 3.17 This pull request adds support for the clocks found in the newly supported Allwinner A23 clocks.
| * clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 supportChen-Yu Tsai2014-07-151-0/+5
| | | | | | | | | | | | | | | | | | This patch adds "allwinner,sun8i-a23-apb0-gates-clk", a A23 specific compatible to the sun6i-a31-apb0-gates clock driver, along with the gate bitmap. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: sun6i-apb0-gates: use bitmaps for valid gate indicesChen-Yu Tsai2014-07-151-36/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | sun6i-apb0-gates uses the "clock-indices" DT property to indicate valid gate bits or holes in between. However, the rest of sunxi clock drivers use bitmaps for this purpose. This patch modifies sun6i-apb0-gates to use bitmaps as well, to be consistent with the sunxi platform. Also add the missing call to clk_register_clkdev, so system clock lookups will work. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gatesChen-Yu Tsai2014-07-071-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sun6i-a31-apb0-gates supports using clock-indices for holes between individual gates. However, the driver passes the number of gates registered in clk_data->clk_num, which of_clk_src_onecell_get uses to recognize the range of valid indices a consumer can use. This patch makes the driver pass the maximum gate index + 1, so of_clk_src_onecell_get does not complain about indices greater than gates registered. This was tested on the A23 SoC, which has a similar APB0 clock, but has holes for gates to removed IP blocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: Add A23 APB0 divider clock supportChen-Yu Tsai2014-07-072-1/+71
| | | | | | | | | | | | | | | | | | | | The A23 has an almost identical PRCM clock tree. The difference in the APB0 clock is the smallest divisor is 1, instead of 2. This patch adds a separate sun8i-a23-apb0-clk driver to support it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: Add A23 clocks supportChen-Yu Tsai2014-07-041-0/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock control unit on the A23 is similar to the one found on the A31. The AHB1, APB1, APB2 gates on the A23 are almost identical to the ones on the A31, but some outputs are missing. The main CPU PLL (PLL1) however is like that on older Allwinner SoCs, such as the A10 or A20, but the N factor starts from 1 instead of 0. This patch adds support for PLL1 and all the basic clock muxes and gates. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: Add support for table-based divider clocksChen-Yu Tsai2014-07-041-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | A few of the clock modules have odd dividers, such as the 2 lowest dividers being the same (2), or have the same divider when the highest bit is set. This patch adds support for optional divider tables, so the clock framework will know about the odd values. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: Support factor clocks with N factor starting not from 0Chen-Yu Tsai2014-07-042-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a N multiplier factor that starts from 1, not 0. This patch adds an option to the factor clk driver's config data structures to specify the base value of N. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: move "ahb_sdram" to protected clock listChen-Yu Tsai2014-07-041-5/+3
| | | | | | | | | | | | | | | | | | | | | | With sunxi_gates clocks registered with clkdev, we can use the protected clocks list to enable the "ahb_sdram" clock, instead of looking for it and adding CLK_IGNORE_UNUSED inline in the clock setup code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * clk: sunxi: register clock gates with clkdevChen-Yu Tsai2014-07-041-0/+1
| | | | | | | | | | | | | | | | | | | | The new important clock protect code requires the clocks be registered with clkdev. This was missing for sunxi_gates type clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | clk: sunxi: fix devm_ioremap_resource error detection codeHimangi Saraogi2014-07-021-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: sunxi: add PRCM (Power/Reset/Clock Management) clks supportBoris BREZILLON2014-06-114-0/+411
| | | | | | | | | | | | | | | | The PRCM (Power/Reset/Clock Management) unit provides several clock devices: - AR100 clk: used to clock the Power Management co-processor - AHB0 clk: used to clock the AHB0 bus - APB0 clk and gates: used to clk peripherals connected to the APB0 bus Add support for these clks in a separate driver so that they can be probed as platform devices instead of registered during early init. This is needed to be able to probe PRCM MFD subdevices. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sun6i: Protect SDRAM gating bitMaxime Ripard2014-06-111-0/+1
| | | | | | | | | Prevent the SDRAM controller from being gated by force-enabling it in the machine code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sun6i: Protect CPU clockMaxime Ripard2014-06-111-0/+1
| | | | | | | | | | | | Right now, AHB is an indirect child clock of the CPU clock. If that happens to change, since the CPU clock has no other consumers declared in Linux, it would be shut down, which is not really a good idea. Prevent this by forcing it enabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sunxi: Rework clock protection codeMaxime Ripard2014-06-111-28/+44
| | | | | | | | | | | | Since we start to have a lot of clocks to protect, some of them in a few SoCs only, it becomes difficult to handle the clock protection without having to add per machine exceptions. Add per-SoC data to tell which clock to leave enabled. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sunxi: Move the GMAC clock to a file of its ownMaxime Ripard2014-06-113-99/+121
| | | | | | | | | | | | Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The gmac clock is pretty easy to deal with, since it's pretty much isolated and doesn't have any dependency on the other clocks. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sunxi: Move the 24M oscillator to a file of its ownMaxime Ripard2014-06-113-57/+74
| | | | | | | | | | | | Since we have a folder of our own, we can actually make use of it by splitting the huge clock file into several sub drivers. The main oscillator is pretty easy to deal with, since it's pretty much isolated. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sunxi: Remove calls to clk_putMaxime Ripard2014-06-111-6/+2
| | | | | | | | | | | Callers of clk_put must disable the clock first. This also means that as long as the clock is enabled the driver should hold a reference to that clock. Hence, the call to clk_put here are bogus and should be removed. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* clk: sunxi: Implement A31 USB clockMaxime Ripard2014-06-111-0/+6
| | | | | | | | | | | The A31 USB clock slightly differ from its older counterparts, mostly because it has a different gate for each PHY, while the older one had a single gate for all the phy. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Emilio López <emilio@elopez.com.ar>
* Merge tag 'clk-for-linus-3.16' of ↵Linus Torvalds2014-06-082-0/+73
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux into next Pull clock framework updates from Mike Turquette: "The clock framework changes for 3.16 are pretty typical: mostly clock driver additions and fixes. There are additions to the clock core code for some of the basic types (e.g. the common divider type has some fixes and featured added to it). One minor annoyance is a last-minute dependency that wasn't handled quite right. Commit ba0fae3b06a6 ("clk: berlin: add core clock driver for BG2/BG2CD") in this pull request depends on include/dt-bindings/clock/berlin2.h, which is already in your tree via the arm-soc pull request. Building for the berlin platform will break when the clk tree is built on it's own, but merged into your master branch everything should be fine" * tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits) mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs clk: export __clk_round_rate for providers clk: versatile: free icst on error return clk: qcom: Return error pointers for unimplemented clocks clk: qcom: Support msm8974pro global clock control hardware clk: qcom: Properly support display clocks on msm8974 clk: qcom: Support display RCG clocks clk: qcom: Return highest rate when round_rate() exceeds plan clk: qcom: Fix mmcc-8974's PLL configurations clk: qcom: Fix clk_rcg2_is_enabled() check clk: berlin: add core clock driver for BG2Q clk: berlin: add core clock driver for BG2/BG2CD clk: berlin: add driver for BG2x complex divider cells clk: berlin: add driver for BG2x simple PLLs clk: berlin: add driver for BG2x audio/video PLL clk: st: Terminate of match table clk/exynos4: Fix compilation warning ARM: shmobile: r8a7779: Add clock index macros for DT sources clk: divider: Fix overflow in clk_divider_bestdiv clk: u300: Terminate of match table ...
| * clk: sunxi: Fixup clk_sunxi_mmc_phase_control to take a clk rather then a hw_clkHans de Goede2014-05-151-1/+2
| | | | | | | | | | | | | | | | __clk_get_hw is supposed to be used by clk providers, not clk consumers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 07:27:04 +0100