summaryrefslogtreecommitdiffstats
path: root/drivers/clk (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycleMarek Szyprowski2017-10-041-0/+15
| | | | | | | | | | | | | | | | | | | Commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks") added enable/disable operations to PLL clocks. Prior that VPLL and EPPL clocks were always enabled because the enable bit was never touched. Those clocks have to be enabled during suspend/resume cycle, because otherwise board fails to enter sleep mode. This patch enables them unconditionally before entering system suspend state. System restore function will set them to the previous state saved in the register cache done before that unconditional enable. Fixes: 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks") CC: stable@vger.kernel.org # v4.13 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* Merge tag 'v4.14-rockchip-clkfixes-1' of ↵Stephen Boyd2017-09-291-5/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull Rockchip clk driver fixes from Heiko Stuebner: Some smallish fixes for the rk3128 clock support including some register errors and some clocks that should be critical for safe usage. * tag 'v4.14-rockchip-clkfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: add sclk_timer5 as critical clock on rk3128 clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error clk: rockchip: add pclk_pmu as critical clock on rk3128
| * clk: rockchip: add sclk_timer5 as critical clock on rk3128Elaine Zhang2017-09-171-0/+1
| | | | | | | | | | | | | | | | sclk_timer5 is for arm arch counter, so need always on. but no dts node to handle this clk, so make it as critical clock Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs errorElaine Zhang2017-09-171-4/+4
| | | | | | | | | | | | | | A copy-paste error made them use the wrong bits in the register. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * clk: rockchip: add pclk_pmu as critical clock on rk3128Elaine Zhang2017-09-171-1/+2
| | | | | | | | | | | | | | | | pclk_pmu need always on, and no dts node to handle this clk, so make it as critical clock Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* | clk: Export clk_bulk_prepare()Bjorn Andersson2017-09-291-0/+1
|/ | | | | | | | | | | Allow clk_bulk_prepare() to be referenced by kernel modules by adding the missing EXPORT_SYMBOL_GPL(). Fixes: 266e4e9d9150 ("clk: add clk_bulk_get accessories") Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2017-09-13114-1037/+8040
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
| * clk: si5351: fix PLL resetRussell King2017-09-021-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changing the audio sample rate on the SolidRun Cubox disrupts the video output. The Si5351 provides both the video clock (using PLLA on output 0) and the audio clock (using PLLB on output 2). When the rate of clock output 2 is changed, it reconfigures PLLB, which results in both PLLA and PLLB being reset. The reset of PLLA causes clock output 0 to be disrupted, thereby causing a loss of sync by the attached display device. Hence, each time the audio sample rate changes (eg, when a video player starts up, or when starting to play music) the video display momentarily blanks while the Si5351 settles down. Prior to the commit below, this behaviour did not happen. Fix this by only resetting only the PLL which has been changed. Fixes: 6dc669a22c77 ("clk: si5351: Add PLL soft reset") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: at91: clk-generated: make gclk determine audio_pll rateQuentin Schulz2017-09-021-6/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows gclk to determine audio_pll rate and set the parent rate accordingly. However, there are multiple children clocks that could technically change the rate of audio_pll (via gck). With the rate locking, the first consumer to enable the clock will be the one definitely setting the rate of the clock. Since audio IPs are most likely to request the same rate, we enforce that the only clks able to modify gck rate are those of audio IPs. To remain consistent, we deny other clocks to be children of audio_pll. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: at91: clk-generated: create function to find best_diffQuentin Schulz2017-09-021-14/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | The way to find the best_diff and do the appropriate process afterwards can be re-used. This patch prepares the driver for an upcoming patch that will allow clk_generated to determine the rate of the audio_pll. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: at91: add audio pll clock driversQuentin Schulz2017-09-022-0/+537
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new clock driver set allows to have a fractional divided clock that would generate a precise clock particularly suitable for audio applications. The main audio pll clock has two children clocks: one that is connected to the PMC, the other that can directly drive a pad. As these two routes have different enable bits and different dividers and divider formulas, they are handled by two different drivers. Each of them could modify the rate of the main audio pll parent. The main audio pll clock can output 620MHz to 700MHz. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: at91: clk-generated: remove useless divisor loopQuentin Schulz2017-09-021-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver requests the current clk rate of each of its parent clocks to decide whether a clock rate is suitable or not. It does not request determine_rate from a parent clock which could request a rate change in parent clock (i.e. there is no parent rate propagation). We know the rate we want (passed along req argument of the function) and the parent clock rate, thus we know the closest rounded divisor, we don't need to iterate over the available divisors to find the best one for a given clock. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: mb86s7x: Drop non-building driverAndreas Färber2017-09-012-391/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It fails to build once we introduce the ARCH_MB86S7X Kconfig symbol: drivers/clk/clk-mb86s7x.c:27:10: fatal error: soc/mb86s7x/scb_mhu.h: No such file or directory #include <soc/mb86s7x/scb_mhu.h> ^~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. And when commenting out that line, we get: drivers/clk/clk-mb86s7x.c: In function 'crg_gate_control': drivers/clk/clk-mb86s7x.c:72:8: error: implicit declaration of function 'mb86s7x_send_packet' [-Werror=implicit-function-declaration] ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ, ^~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:72:28: error: 'CMD_PERI_CLOCK_GATE_SET_REQ' undeclared (first use in this function) ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ, ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:72:28: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/clk-mb86s7x.c: In function 'crg_rate_control': drivers/clk/clk-mb86s7x.c:116:10: error: 'CMD_PERI_CLOCK_RATE_SET_REQ' undeclared (first use in this function) code = CMD_PERI_CLOCK_RATE_SET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:121:10: error: 'CMD_PERI_CLOCK_RATE_GET_REQ' undeclared (first use in this function); did you mean 'CMD_PERI_CLOCK_RATE_SET_REQ'? code = CMD_PERI_CLOCK_RATE_GET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~~ CMD_PERI_CLOCK_RATE_SET_REQ drivers/clk/clk-mb86s7x.c: In function 'mhu_cluster_rate': drivers/clk/clk-mb86s7x.c:276:10: error: 'CMD_CPU_CLOCK_RATE_GET_REQ' undeclared (first use in this function) code = CMD_CPU_CLOCK_RATE_GET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/clk-mb86s7x.c:278:10: error: 'CMD_CPU_CLOCK_RATE_SET_REQ' undeclared (first use in this function); did you mean 'CMD_CPU_CLOCK_RATE_GET_REQ'? code = CMD_CPU_CLOCK_RATE_SET_REQ; ^~~~~~~~~~~~~~~~~~~~~~~~~~ CMD_CPU_CLOCK_RATE_GET_REQ cc1: some warnings being treated as errors scripts/Makefile.build:302: recipe for target 'drivers/clk/clk-mb86s7x.o' failed make[2]: *** [drivers/clk/clk-mb86s7x.o] Error 1 Remove the driver for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: ti: check for null return in strrchr to avoid null dereferencingColin Ian King2017-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | strrchr can potentially return a null so the following strlen on the null pointer can cause a null dereference. Add a check to see if the string postfix is not null before calling strlen. Detected by CoverityScan, CID#1452039 ("Dereference null return") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: Don't write error code into divider registerAlex Frid2017-09-011-2/+4
| | | | | | | | | | | | | | | | | | | | | | Add a check for error returned by divider value calculation to avoid writing error code into hw register. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com> Fixes: bca9690b9426 ("clk: divider: Make generic for usage elsewhere") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: uniphier: add video input subsystem clockKatsuhiro Suzuki2017-09-011-0/+6
| | | | | | | | | | | | | | | | | | Add a clock for video input subsystem (EXIV) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: uniphier: add audio system clockKatsuhiro Suzuki2017-09-011-0/+12
| | | | | | | | | | | | | | | | | | Add clock for audio subsystem (AIO) and SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: stm32h7: Add stm32h743 clock driverGabriel Fernandez2017-09-012-0/+1411
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables clocks for STM32H743 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> for MFD changes: Acked-by: Lee Jones <lee.jones@linaro.org> for DT-Bindings Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: gate: expose clk_gate_ops::is_enabledGabriel Fernandez2017-09-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | This patch exposes clk_gate_ops::is_enabled as functions that can be directly called and assigned in places like this so we don't need wrapper functions that do nothing besides forward the call. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()Gabriel Fernandez2017-09-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to export clk_gate_is_enabled() from clk framework, then to avoid compilation issue we have to rename clk_gate_is_enabled() in NXP LPC32xx clock driver. We changed all gate op with 'lpc32xx_' prefix: lpc32xx_clk_gate_enable(), lpc32xx_clk_gate_disable(), lpc32xx_clk_gate_is_enabled(). Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: uniphier: add PXs3 clock dataMasahiro Yamada2017-09-013-0/+43
| | | | | | | | | | | | | | Add basic clock data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: hi6220: change watchdog clock sourceLeo Yan2017-09-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | The old code uses tcxo (19.2MHz) as watchdog clock but actually the watchdog uses 32K clock, as result the watchdog timeout cannot be set correctly and delay long time to reset SoC. So this patch is to use 'ref32k' as clock source for watchdog. Fixes: 72ea48610d43 ("clk: hi6220: Clock driver support for Hisilicon hi6220 SoC") Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808Elaine Zhang2017-09-011-2/+2
| | | | | | | | | | | | | | | | | | | | The RK808 and RK805 PMICs are using a similar register map. We can reuse the clk driver for the RK805 PMIC. So let's add the RK805 in the Kconfig description. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: cs2000: Add cs2000_set_saved_rateGaku Inami2017-08-311-4/+10
| | | | | | | | | | | | | | | | | | | | | | This patch adds the common function to reset the clk rate in order to be able to use it in other cases. Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * clk: imx51: propagate rate across ipu_di*_selLucas Stach2017-08-311-4/+4
| | | | | | | | | | | | | | | | | | | | | | This propagates rate requests from the display interface to the divider or PLL output, allowing to hit the required display rate in many more cases. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-By: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * Merge tag 'sunxi-clk-for-4.14-3' of ↵Stephen Boyd2017-08-314-0/+1531
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull more Allwinner clock changes from Maxime Ripard: * Conversion of the last two SoCs (A10, A20) to the sunxi-ng framework * tag 'sunxi-clk-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: Add sun4i/sun7i CCU driver dt-bindings: List devicetree binding for the CCU of Allwinner A10 dt-bindings: List devicetree binding for the CCU of Allwinner A20
| | * clk: sunxi-ng: Add sun4i/sun7i CCU driverPriit Laes2017-08-244-0/+1531
| | | | | | | | | | | | | | | | | | | | | | | | Introduce a clock controller driver for sun4i A10 and sun7i A20 series SoCs. Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | clk: sunxi: fix uninitialized accessArnd Bergmann2017-08-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gcc-8 reports an uninitialized variable access in a code path that we would see with incorrect DTB input: drivers/clk/sunxi/clk-sun8i-bus-gates.c: In function 'sun8i_h3_bus_gates_init': drivers/clk/sunxi/clk-sun8i-bus-gates.c:85:27: error: 'clk_parent' may be used uninitialized in this function [-Werror=maybe-uninitialized] This works around by skipping invalid input and printing a warning instead if it ever happens. The problem was apparently part of the initiali driver submission, but older compilers don't notice it. Fixes: ab6e23a4e388 ("clk: sunxi: Add H3 clocks support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: versatile: make clk_ops constBhumika Goyal2017-08-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make this const as it is only stored in the const field of a clk_init_data structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | ARC: clk: introduce HSDK pll driverEugeniy Paltsev2017-08-313-0/+439
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HSDK board manages its clocks using various PLLs. These PLL have same dividers and corresponding control registers mapped to different addresses. So we add one common driver for such PLLs. Each PLL on HSDK board consists of three dividers: IDIV, FBDIV and ODIV. Output clock value is managed using these dividers. We add pre-defined tables with supported rate values and appropriate configurations of IDIV, FBDIV and ODIV for each value. As of today we add support for PLLs that generate clock for the HSDK arc cpus, system, ddr, AXI tunnel and hdmi. By this patch we add support for several plls (arc cpus pll and others), so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll and regular probing for others plls. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: zte: constify clk_div_tableArvind Yadav2017-08-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_div_table are not supposed to change at runtime. All functions working with clk_div_table provided by <linux/clk-provider.h> work with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: imx: constify clk_div_tableArvind Yadav2017-08-315-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_div_table are not supposed to change at runtime. All functions working with clk_div_table provided by <linux/clk-provider.h> work with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: uniphier: add ethernet clock control supportKunihiko Hayashi2017-08-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Add clock control for ethernet controller on Pro4, PXs2, LD11 and LD20. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: gemini: hands off PCI OE bitLinus Walleij2017-08-311-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | This bit is pin control, and needs to be carefully managed by the new pin control driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: ux500: prcc: constify clk_ops.Arvind Yadav2017-08-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_ops are not supposed to change at runtime. All functions working with clk_ops provided by <linux/clk-provider.h> work with const clk_ops. So mark the non-const clk_ops as const. Here, Function "clk_reg_prcc" is used to initialized clk_init_data. clk_init_data is working with const clk_ops. So make clk_reg_prcc non-const clk_ops argument as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: ux500: sysctrl: constify clk_ops.Arvind Yadav2017-08-311-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_ops are not supposed to change at runtime. All functions working with clk_ops provided by <linux/clk-provider.h> work with const clk_ops. So mark the non-const clk_ops as const. Here, Function "clk_reg_sysctrl" is used to initialized clk_init_data. clk_init_data is working with const clk_ops. So make clk_reg_sysctrl non-const clk_ops argument as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: ux500: prcmu: constify clk_ops.Arvind Yadav2017-08-311-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_ops are not supposed to change at runtime. All functions working with clk_ops provided by <linux/clk-provider.h> work with const clk_ops. So mark the non-const clk_ops as const. Here, Function "clk_reg_prcmu" is used to initialized clk_init_data. clk_init_data is working with const clk_ops. So make clk_reg_prcmu non-const clk_ops argument as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: msm8996-gcc: add missing smmu clksSrinivas Kandagatla2017-08-241-0/+28
| | | | | | | | | | | | | | | | | | | | | This patch adds missing LPASS smmu clks which are required by the audio driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Fix Tegra210 PLLU initializationAlex Frid2017-08-241-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Added necessary delays in PLLU enable sequence during initialization - Applied PLLU lock to all secondary gates (PLLU_48M and PLLU_60M were missing). Signed-off-by: Alex Frid <afrid@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Correct Tegra210 UTMIPLL poweron delayAlex Frid2017-08-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increased Tegra210 UTMIPLL power on delay to 20us (spec maximum is 15us). Also remove a few empty lines to make it more clear the ACTIVE_DLY_COUNT and ENABLE_DLY_COUNT fields. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Fix T210 PLLRE registrationAlex Frid2017-08-241-20/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switched Tegra210 PLLRE registration to common PLL ops instead of special PLLRE ops used on previous Tegra chips. The latter ops do not follow chip specific PLL frequency table, and do not apply chip specific rate calculation method. Removed unnecessary default rate setting that duplicates h/w reset state, and is overwritten by clock initialization, anyway. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Update T210 PLLSS (D2/DP) registrationAlex Frid2017-08-241-39/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove from Tegra210 PLLSS registration code sections that - attempt to set PLL minimum rate (unnecessary, and dangerous if PLL is already enabled on boot) - apply pre-Tegra210 defaults settings - check IDDQ setting (duplicated with Tegra210 PLLSS check defaults) Replaced setting of reference clock with check that default oscillator selection is not changed, and failed registration otherwise as validation was only done with the oscillator as the reference clock. Reordered registration, so that PLL initialization is called after VCOmin adjustment. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Re-factor T210 PLLX registrationAlex Frid2017-08-244-49/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra210 PLLX uses the same sequences than then PLLC instances. So there is no need to have a special registration function and ops struct for it. Simplify the code by changing all references to the Tegra210 PLLX registration function to the Tegra210 PLLC registration function and avoid duplicate functionality. Based on work by Alex Frid <afrid@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: don't warn for pll_d2 defaults unnecessarilyPeter De Schrijver2017-08-241-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the PLL is on, only warn if the defaults are not yet set. Otherwise be silent. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Timo Alho <talho@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: change post IDDQ release delay to 5usPeter De Schrijver2017-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase delay after PLL IDDQ release to 5us per PLL specifications. based on work by Alex Frid <afrid@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Add TEGRA_PERIPH_ON_APB flag to I2CAlex Frid2017-08-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C controllers are also on the APB bus and therefor need this flag to handle resets correctly. Signed-off-by: Alex Frid <afrid@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Fix T210 effective NDIV calculationAlex Frid2017-08-241-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't take the fractional part into account to calculate the effective NDIV if fractional ndiv is not enabled. Signed-off-by: Alex Frid <afrid@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: Init cfg structure in _get_pll_mnpPeter De Schrijver2017-08-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all fields are read from the hw depending on the PLL type. Make sure the other fields are 0 by clearing the structure beforehand to prevent users such as the rate re-calculation code from using bogus values. Based on work by Alex Frid <afrid@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra210: remove non-existing VFIR clockPeter De Schrijver2017-08-241-1/+0
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | clk: tegra: disable SSC for PLL_D2Peter De Schrijver2017-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | PLLD2 is used for HDMI which does not allow Spread Spectrum clocking. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 05:27:47 +0100