summaryrefslogtreecommitdiffstats
path: root/drivers/clk (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2022-10-1615-124/+1810
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
| * Merge branch 'clk-rate-range' into clk-nextStephen Boyd2022-10-149-113/+1805
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Various clk rate range fixes - Drop clk rate range constraints on clk_put() (redux) * clk-rate-range: (28 commits) clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() clk: tests: Add some tests for orphan with multiple parents clk: tests: Add tests for mux with multiple parents clk: tests: Add tests for single parent mux ...
| | * clk: mediatek: clk-mux: Add .determine_rate() callbackAngeloGioacchino Del Regno2022-10-141-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent"), the clk_rate_request is .. as the title says, not forwarded anymore to the parent: this produces an issue with the MediaTek clock MUX driver during GPU DVFS on MT8195, but not on MT8192 or others. This is because, differently from others, like MT8192 where all of the clocks in the MFG parents tree are of mtk_mux type, but in the parent tree of MT8195's MFG clock, we have one mtk_mux clock and one (clk framework generic) mux clock, like so: names: mfg_bg3d -> mfg_ck_fast_ref -> top_mfg_core_tmp (or) mfgpll types: mtk_gate -> mux -> mtk_mux (or) mtk_pll To solve this issue and also keep the GPU DVFS clocks code working as expected, wire up a .determine_rate() callback for the mtk_mux ops; for that, the standard clk_mux_determine_rate_flags() was used as it was possible to. This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm, MT8192 Spherion and MT8195 Tomato; no regressions were seen. For the sake of some more documentation about this issue here's the trace of it: [ 12.211587] ------------[ cut here ]------------ [ 12.211589] WARNING: CPU: 6 PID: 78 at drivers/clk/clk.c:1462 clk_core_init_rate_req+0x84/0x90 [ 12.211593] Modules linked in: stp crct10dif_ce mtk_adsp_common llc rfkill snd_sof_xtensa_dsp panfrost(+) sbs_battery cros_ec_lid_angle cros_ec_sensors snd_sof_of cros_ec_sensors_core hid_multitouch cros_usbpd_logger snd_sof gpu_sched snd_sof_utils fuse ipv6 [ 12.211614] CPU: 6 PID: 78 Comm: kworker/u16:2 Tainted: G W 6.0.0-next-20221011+ #58 [ 12.211616] Hardware name: Acer Tomato (rev2) board (DT) [ 12.211617] Workqueue: devfreq_wq devfreq_monitor [ 12.211620] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 12.211622] pc : clk_core_init_rate_req+0x84/0x90 [ 12.211625] lr : clk_core_forward_rate_req+0xa4/0xe4 [ 12.211627] sp : ffff80000893b8e0 [ 12.211628] x29: ffff80000893b8e0 x28: ffffdddf92f9b000 x27: ffff46a2c0e8bc05 [ 12.211632] x26: ffff46a2c1041200 x25: 0000000000000000 x24: 00000000173eed80 [ 12.211636] x23: ffff80000893b9c0 x22: ffff80000893b940 x21: 0000000000000000 [ 12.211641] x20: ffff46a2c1039f00 x19: ffff46a2c1039f00 x18: 0000000000000000 [ 12.211645] x17: 0000000000000038 x16: 000000000000d904 x15: 0000000000000003 [ 12.211649] x14: ffffdddf9357ce48 x13: ffffdddf935e71c8 x12: 000000000004803c [ 12.211653] x11: 00000000a867d7ad x10: 00000000a867d7ad x9 : ffffdddf90c28df4 [ 12.211657] x8 : ffffdddf9357a980 x7 : 0000000000000000 x6 : 0000000000000004 [ 12.211661] x5 : ffffffffffffffc8 x4 : 00000000173eed80 x3 : ffff80000893b940 [ 12.211665] x2 : 00000000173eed80 x1 : ffff80000893b940 x0 : 0000000000000000 [ 12.211669] Call trace: [ 12.211670] clk_core_init_rate_req+0x84/0x90 [ 12.211673] clk_core_round_rate_nolock+0xe8/0x10c [ 12.211675] clk_mux_determine_rate_flags+0x174/0x1f0 [ 12.211677] clk_mux_determine_rate+0x1c/0x30 [ 12.211680] clk_core_determine_round_nolock+0x74/0x130 [ 12.211682] clk_core_round_rate_nolock+0x58/0x10c [ 12.211684] clk_core_round_rate_nolock+0xf4/0x10c [ 12.211686] clk_core_set_rate_nolock+0x194/0x2ac [ 12.211688] clk_set_rate+0x40/0x94 [ 12.211691] _opp_config_clk_single+0x38/0xa0 [ 12.211693] _set_opp+0x1b0/0x500 [ 12.211695] dev_pm_opp_set_rate+0x120/0x290 [ 12.211697] panfrost_devfreq_target+0x3c/0x50 [panfrost] [ 12.211705] devfreq_set_target+0x8c/0x2d0 [ 12.211707] devfreq_update_target+0xcc/0xf4 [ 12.211708] devfreq_monitor+0x40/0x1d0 [ 12.211710] process_one_work+0x294/0x664 [ 12.211712] worker_thread+0x7c/0x45c [ 12.211713] kthread+0x104/0x110 [ 12.211716] ret_from_fork+0x10/0x20 [ 12.211718] irq event stamp: 7102 [ 12.211719] hardirqs last enabled at (7101): [<ffffdddf904ea5a0>] finish_task_switch.isra.0+0xec/0x2f0 [ 12.211723] hardirqs last disabled at (7102): [<ffffdddf91794b74>] el1_dbg+0x24/0x90 [ 12.211726] softirqs last enabled at (6716): [<ffffdddf90410be4>] __do_softirq+0x414/0x588 [ 12.211728] softirqs last disabled at (6507): [<ffffdddf904171d8>] ____do_softirq+0x18/0x24 [ 12.211730] ---[ end trace 0000000000000000 ]--- Fixes: 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221011135548.318323-1-angelogioacchino.delregno@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add tests for notifiersMaxime Ripard2022-10-111-0/+156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're recently encountered a regression due to the rates reported through the clk_notifier_data being off when changing parents. Let's add a test suite and a test to make sure that we do get notified and with the proper rates. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-2-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Update req_rate on __clk_recalc_rates()Maxime Ripard2022-10-111-28/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cb1b1dd96241 ("clk: Set req_rate on reparenting") introduced a new function, clk_core_update_orphan_child_rates(), that updates the req_rate field on reparenting. It turns out that that function will interfere with the clock notifying done by __clk_recalc_rates(). This ends up reporting the new rate in both the old_rate and new_rate fields of struct clk_notifier_data. Since clk_core_update_orphan_child_rates() is basically __clk_recalc_rates() without the notifiers, and with the req_rate field update, we can drop clk_core_update_orphan_child_rates() entirely, and make __clk_recalc_rates() update req_rate. However, __clk_recalc_rates() is being called in several code paths: when retrieving a rate (most likely through clk_get_rate()), when changing parents (through clk_set_rate() or clk_hw_reparent()), or when updating the orphan status (through clk_core_reparent_orphans_nolock(), called at registration). Updating req_rate on reparenting or initialisation makes sense, but we shouldn't do it on clk_get_rate(). Thus an extra flag has been added to update or not req_rate depending on the context. Fixes: cb1b1dd96241 ("clk: Set req_rate on reparenting") Link: https://lore.kernel.org/linux-clk/0acc7217-762c-7c0d-45a0-55c384824ce4@samsung.com/ Link: https://lore.kernel.org/linux-clk/Y0QNSx+ZgqKSvPOC@sirena.org.uk/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20221010-rpi-clk-fixes-again-v1-1-d87ba82ac404@cerno.tech Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add missing test case for rangesMaxime Ripard2022-09-151-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's add a test on the rate range after a reparenting. This fails for now, but it's worth having it to document the corner cases we don't support yet. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-26-maxime@cerno.tech Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3dMaxime Ripard2022-09-151-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gfx3d clock is hand-crafting its own clk_rate_request in clk_gfx3d_determine_rate to pass to the parent of that clock. However, since the clk_rate_request is zero'd at creation, it will have a max_rate of 0 which will break any code depending on the clock boundaries. That includes the recent commit 948fb0969eae ("clk: Always clamp the rounded rate") which will clamp the rate given to clk_round_rate() to the current clock boundaries. For the gfx3d clock, it means that since both the min_rate and max_rate fields are set at zero, clk_round_rate() now always return 0. Let's initialize the min_rate and max_rate fields properly for that clock. Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-25-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Introduce the clk_hw_get_rate_range functionMaxime Ripard2022-09-151-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some clock providers are hand-crafting their clk_rate_request, and need to figure out the current boundaries of their clk_hw to fill it properly. Let's create such a function for clock providers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-24-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Zero the clk_rate_request structureMaxime Ripard2022-09-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to make sure we don't carry anything over from an already existing clk_rate_request pointer we would pass to clk_core_init_rate_req(), let's zero the entire structure before initializing it. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-23-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Stop forwarding clk_rate_requests to the parentMaxime Ripard2022-09-156-16/+274
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the clock cannot modify its rate and has CLK_SET_RATE_PARENT, clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a number of drivers will forward the clk_rate_request to the parent clock. clk_core_round_rate_nolock() will pass the pointer directly, which means that we pass a clk_rate_request to the parent that has the rate, min_rate and max_rate of the child, and the best_parent_rate and best_parent_hw fields will be relative to the child as well, so will point to our current clock and its rate. The most common case for CLK_SET_RATE_PARENT is that the child and parent clock rates will be equal, so the rate field isn't a worry, but the other fields are. Similarly, if the parent clock driver ever modifies the best_parent_rate or best_parent_hw, this will be applied to the child once the call to clk_core_round_rate_nolock() is done. best_parent_hw is probably not going to be a valid parent, and best_parent_rate might lead to a parent rate change different to the one that was initially computed. clk_mux_determine_rate_flags() and the affected drivers will copy the request before forwarding it to the parents, so they won't be affected by the latter issue, but the former is still going to be there and will lead to erroneous data and context being passed to the various clock drivers in the same sub-tree. Let's create two new functions, clk_core_forward_rate_req() and clk_hw_forward_rate_request() for the framework and the clock providers that will copy a request from a child clock and update the context to match the parent's. We also update the relevant call sites in the framework and drivers to use that new function. Let's also add a test to make sure we avoid regressions there. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-22-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Constify clk_has_parent()Maxime Ripard2022-09-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_has_parent() doesn't modify the clocks being passed, so let's make it const. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-21-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Introduce clk_core_has_parent()Maxime Ripard2022-09-152-15/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We will need to know if a clk_core pointer has a given parent in other functions, so let's create a clk_core_has_parent() function that clk_has_parent() will call into. For good measure, let's add some unit tests as well to make sure it works properly. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-20-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> [sboyd@kernel.org: Move tmp declaration, fix conditional to check for current parent] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Switch from __clk_determine_rate to clk_core_round_rate_nolockMaxime Ripard2022-09-151-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_mux_determine_rate_flags() will call into __clk_determine_rate() with a clk_hw pointer, while it has access to the clk_core pointer already. This leads to back and forth between clk_hw and clk_core, while __clk_determine_rate will only call clk_core_round_rate_nolock() with the clk_core pointer it retrieved from the clk_hw. Let's simplify things a bit by calling into clk_core_round_rate_nolock directly. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-19-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Add our request boundaries in clk_core_init_rate_reqMaxime Ripard2022-09-151-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The expectation is that a new clk_rate_request is initialized through a call to clk_core_init_rate_req(). However, at the moment it only fills the parent rate and clk_hw pointer, but omits the other fields such as the clock rate boundaries. Some users of that function will update them after calling it, but most don't. As we are passed the clk_core pointer, we have access to those boundaries in clk_core_init_rate_req() however, so let's just fill it there and remove it from the few callers that do it right. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-18-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Introduce clk_hw_init_rate_request()Maxime Ripard2022-09-152-10/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk-divider instantiates clk_rate_request internally for its round_rate implementations to share the code with its determine_rate implementations. However, it's missing a few fields (min_rate, max_rate) that would be initialized properly if it was using clk_core_init_rate_req(). Let's create the clk_hw_init_rate_request() function for clock providers to be able to share the code to instation clk_rate_requests with the framework. This will also be useful for some tests introduced in later patches. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-17-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its ↵Maxime Ripard2022-09-151-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | caller The clk_rate_request structure is used internally as an argument for the clk_core_determine_round_nolock() and clk_core_round_rate_nolock(). In both cases, the clk_core_init_rate_req() function is used to initialize the clk_rate_request structure. However, the expectation on who gets to call that function is inconsistent between those two functions. Indeed, clk_core_determine_round_nolock() will assume the structure is properly initialized and will just use it. On the other hand, clk_core_round_rate_nolock() will call clk_core_init_rate_req() itself, expecting the caller to have filled only a minimal set of parameters (rate, min_rate and max_rate). If we ignore the calling convention inconsistency, this leads to a second inconsistency for drivers: * If they get called by the framework through clk_core_round_rate_nolock(), the rate, min_rate and max_rate fields will be filled by the caller, and the best_parent_rate and best_parent_hw fields will get filled by clk_core_init_rate_req(). * If they get called by a driver through __clk_determine_rate (and thus clk_core_round_rate_nolock), only best_parent_rate and best_parent_hw are being explicitly set by the framework. Even though we can reasonably expect rate to be set, only one of the 6 in-tree users explicitly set min_rate and max_rate. * If they get called by the framework through clk_core_determine_round_nolock(), then we have two callpaths. Either it will be called by clk_core_round_rate_nolock() itself, or it will be called by clk_calc_new_rates(), which will properly initialize rate, min_rate, max_rate itself, and best_parent_rate and best_parent_hw through clk_core_init_rate_req(). Even though the first and third case seems equivalent, they aren't when the clock has CLK_SET_RATE_PARENT. Indeed, in such a case clk_core_round_rate_nolock() will call itself on the current parent clock with the same clk_rate_request structure. The clk_core_init_rate_req() function will then be called on the parent clock, with the child clk_rate_request pointer and will fill the best_parent_rate and best_parent_hw fields with the parent context. When the whole recursion stops and the call returns, the initial caller will end up with a clk_rate_request structure with some information of the child clock (rate, min_rate, max_rate) and some others of the last clock up the tree whose child had CLK_SET_RATE_PARENT (best_parent_hw, best_parent_rate). In the most common case, best_parent_rate is going to be equal on all the parent clocks so it's not a big deal. However, best_parent_hw is going to point to a clock that never has been a valid parent for that clock which is definitely confusing. In order to fix the calling inconsistency, let's move the clk_core_init_rate_req() calls to the callers, which will also help a bit with the clk_core_round_rate_nolock() recursion. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-16-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Change clk_core_init_rate_req prototypeMaxime Ripard2022-09-151-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The expectation is that a clk_rate_request structure is supposed to be initialized using clk_core_init_rate_req(), yet the rate we want to request still needs to be set by hand. Let's just pass the rate as a function argument so that callers don't have any extra work to do. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-15-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Set req_rate on reparentingMaxime Ripard2022-09-152-0/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a non-rate clock started by default with a parent that never registered, core->req_rate will be 0. The expectation is that whenever the parent will be registered, req_rate will be updated with the new value that has just been computed. However, if that clock is a mux, clk_set_parent() can also make that clock no longer orphan. In this case however, we never update req_rate. The natural solution to this would be to update core->rate and core->req_rate in clk_reparent() by calling clk_recalc(). However, this doesn't work in all cases. Indeed, clk_recalc() is called by __clk_set_parent_before(), __clk_set_parent() and clk_core_reparent(). Both __clk_set_parent_before() and __clk_set_parent will call clk_recalc() with the enable_lock taken through a call to clk_enable_lock(), the underlying locking primitive being a spinlock. clk_recalc() calls the backing driver .recalc_rate hook, and that implementation might sleep if the underlying device uses a bus with accesses that might sleep, such as i2c. In such a situation, we would end up sleeping while holding a spinlock, and thus in an atomic section. In order to work around this, we can move the core->rate and core->req_rate update to the clk_recalc() calling sites, after the enable_lock has been released if it was taken. The only situation that could still be problematic is the clk_core_reparent() -> clk_reparent() case that doesn't have any locking. clk_core_reparent() is itself called by clk_hw_reparent(), which is then called by 4 drivers: * clk-stm32mp1.c, stm32/clk-stm32-core.c and tegra/clk-tegra210-emc.c use it in their set_parent implementation. The set_parent hook is only called by __clk_set_parent() and clk_change_rate(), both of them calling it without the enable_lock taken. * clk/tegra/clk-tegra124-emc.c calls it as part of its set_rate implementation. set_rate is only called by clk_change_rate(), again without the enable_lock taken. In both cases we can't end up in a situation where the clk_hw_reparent() caller would hold a spinlock, so it seems like this is a good workaround. Let's also add some unit tests to make sure we cover the original bug. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-14-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Take into account uncached clocks in clk_set_rate_range()Maxime Ripard2022-09-152-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_set_rate_range() will use the last requested rate for the clock when it calls into the driver set_rate hook. However, if CLK_GET_RATE_NOCACHE is set on that clock, the last requested rate might not be matching the current rate of the clock. In such a case, let's read out the rate from the hardware and use that in our set_rate instead. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-13-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add some tests for orphan with multiple parentsMaxime Ripard2022-09-151-0/+237
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's leverage the dummy mux with multiple parents we have to create a mux whose default parent will never be registered, and thus will always be orphan by default. We can then create some tests to make sure that the clock API behaves properly in such a case, and that the transition to a non-orphan clock when we change the parent is done properly. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-12-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add tests for mux with multiple parentsMaxime Ripard2022-09-151-0/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We'll need to test a few corner cases that occur when we have a mux clock whose default parent is missing. For now, let's create the context structure and the trivial ops, along with a test suite that just tests trivial things for now, without considering the orphan case. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-11-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add tests for single parent muxMaxime Ripard2022-09-151-9/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a few tests for a mux with a single parent, testing the case where it used to be orphan. Let's leverage most of the code but register the clock properly to test a few trivial things. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-10-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add tests for uncached clockMaxime Ripard2022-09-151-1/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock framework supports clocks that can have their rate changed without the kernel knowing about it using the CLK_GET_RATE_NOCACHE flag. As its name suggests, this flag turns off the rate caching in the clock framework, reading out the rate from the hardware any time we need to read it. Let's add a couple of tests to make sure it works as intended. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-9-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add reference to the orphan mux bug reportMaxime Ripard2022-09-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some more context might be useful for unit-tests covering a previously reported bug, so let's add a link to the discussion for that bug. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-8-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: tests: Add test suites descriptionMaxime Ripard2022-09-151-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We start to have a few test suites, and we'll add more, so it will get pretty confusing to figure out what is supposed to be tested in what suite. Let's add some comments to explain what setup they create, and what we should be testing in every suite. Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-7-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Clarify clk_get_rate() expectationsMaxime Ripard2022-09-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As shown by a number of clock users already, clk_get_rate() can be called whether or not the clock is enabled. Similarly, a number of clock drivers will return a rate of 0 whenever the rate cannot be figured out. Since it was a bit ambiguous before, let's make it clear in the clk_get_rate() documentation. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-6-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Skip clamping when rounding if there's no boundariesMaxime Ripard2022-09-151-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 948fb0969eae ("clk: Always clamp the rounded rate") recently started to clamp the request rate in the clk_rate_request passed as an argument of clk_core_determine_round_nolock() with the min_rate and max_rate fields of that same request. While the clk_rate_requests created by the framework itself always have those fields set, some drivers will create it themselves and don't always fill min_rate and max_rate. In such a case, we end up clamping the rate with a minimum and maximum of 0, thus always rounding the rate to 0. Let's skip the clamping if both min_rate and max_rate are set to 0 and complain so that it gets fixed. Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-4-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: Drop the rate range on clk_put()Maxime Ripard2022-09-152-14/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When clk_put() is called we don't make another clk_set_rate() call to re-evaluate the rate boundaries. This is unlike clk_set_rate_range() that evaluates the rate again each time it is called. However, clk_put() is essentially equivalent to clk_set_rate_range() since after clk_put() completes the consumer's boundaries shouldn't be enforced anymore. Let's add a call to clk_set_rate_range() in clk_put() to make sure those rate boundaries are dropped and the clock provider drivers can react. In order to be as non-intrusive as possible, we'll just make that call if the clock had non-default boundaries. Also add a few tests to make sure this case is covered. Fixes: c80ac50cbb37 ("clk: Always set the rate on clk_set_range_rate") Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-3-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * clk: test: Switch to clk_hw_get_clkMaxime Ripard2022-09-151-19/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the clk_hw->clk pointer is equivalent to calling clk_hw_get_clk(), but will make the job harder if we need to rework that part in the future. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220816112530.1837489-2-maxime@cerno.tech Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * | clk: tegra: Fix Tegra PWM parent clockJon Hunter2022-10-145-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8c193f4714df ("pwm: tegra: Optimize period calculation") updated the period calculation in the Tegra PWM driver and now returns an error if the period requested is less than minimum period supported. This is breaking PWM support on various Tegra platforms. For example, on the Tegra210 Jetson Nano platform this is breaking the PWM fan support and probing the PWM fan driver now fails ... pwm-fan pwm-fan: Failed to configure PWM: -22 pwm-fan: probe of pwm-fan failed with error -22 The problem is that the default parent clock for the PWM on Tegra210 is a 32kHz clock and is unable to support the requested PWM period. Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by updating the parent clock for the PWM to be the PLL_P. Fixes: 8c193f4714df ("pwm: tegra: Optimize period calculation") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3 Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| * | clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocksLinus Walleij2022-10-141-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These two clocks are now registered in the device tree as fixed clocks, causing a regression in the driver as the clock already exists with e.g. the name "pxo_board" as the MSM8660 GCC driver probes. Fix this by just not hard-coding this anymore and everything works like a charm. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: baecbda52933 ("ARM: dts: qcom: msm8660: fix node names for fixed clocks") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221013140745.7801-1-linus.walleij@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | | Merge tag 'arm-fixes-6.1-1' of ↵Linus Torvalds2022-10-142-0/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are three fixes for build warnings that came in during the merge window" * tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: mmp: Make some symbols static ARM: spear6xx: Staticize few definitions clk: spear: Move prototype to accessible header
| * | | clk: spear: Move prototype to accessible headerViresh Kumar2022-10-102-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following W=1 kernel build warning(s): drivers/clk/spear/spear6xx_clock.c:116:13: warning: no previous prototype for function 'spear6xx_clk_init' [-Wmissing-prototypes] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | | | Merge tag 'clk-for-linus' of ↵Linus Torvalds2022-10-08214-3761/+24667
|\ \ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ...
| | | |
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| *-----. \ \ Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' ↵Stephen Boyd2022-10-0415-224/+2101
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into clk-next - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - Support for Renesas VersaClock7 clock generator family * clk-baikal: clk: baikal-t1: Convert to platform device driver clk: baikal-t1: Add DDR/PCIe directly controlled resets support dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs clk: baikal-t1: Move reset-controls code into a dedicated module clk: baikal-t1: Add SATA internal ref clock buffer clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent clk: baikal-t1: Fix invalid xGMAC PTP clock divider clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD * clk-broadcom: clk: bcm: rpi: Add support for VEC clock clk: bcm: rpi: Handle pixel clock in firmware clk: bcm: rpi: Add support HEVC clock clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: bcm2835: Round UART input clock up clk: bcm2835: Make peripheral PLLC critical * clk-vc5: clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: vc5: Use regmap_{set,clear}_bits() where appropriate clk: vc5: Check IO access results * clk-versaclock: clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings
| | | | | * | | clk: Renesas versaclock7 ccf device driverAlex Helms2022-10-013-0/+1321
| | | | | | |/ | | | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Renesas Versaclock7 is a family of configurable clock generator ICs with fractional and integer dividers. This driver has basic support for the RC21008A device, a clock synthesizer with a crystal input and 8 outputs. The supports changing the FOD and IOD rates, and each output can be gated. Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com> Link: https://lore.kernel.org/r/20220912183613.22213-3-alexander.helms.jy@renesas.com Tested-by: Saeed Nowshadi <saeed.nowshadi@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | | * | | clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975Matthias Fend2022-10-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update IDT VersaClock 5 driver to support 5P49V6975. The 5P49V6975 is a member of the VersaClock 6E family and supports four fractional dividers (FODs), five clock outputs and an internal oscillator. Signed-off-by: Matthias Fend <matthias.fend@emfend.at> Link: https://lore.kernel.org/r/20220511053455.360335-2-matthias.fend@emfend.at Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | | * | | clk: vc5: Use regmap_{set,clear}_bits() where appropriateLars-Peter Clausen2022-10-011-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | regmap_set_bits() and regmap_clear_bits() are variations of regmap_update_bits() that can be used if all bits of the mask have to be set to either 1 or 0 respectively. Update the versaclk driver to use regmap_set_bits() and regmap_clear_bits() where appropriate. This results in slightly more compact code and also makes the intention of the code clearer which can help with review. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220719094637.844946-2-lars@metafoo.de Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | | * | | clk: vc5: Check IO access resultsLars-Peter Clausen2022-10-011-50/+91
| | | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The devices of the versaclk clock generator family use an I2C control bus. IO access on an I2C bus can fail for various reasons. The driver currently ignores the return value of most IO operations. This results in silent failure. To avoid this check the return value and in case of an error abort the operation and propagate the error code to the caller. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220719094637.844946-1-lars@metafoo.de Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * | | clk: bcm: rpi: Add support for VEC clockDom Cobley2022-09-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform driver clk-bcm2835 gets an inaccurate clock for VEC (107MHz). Export VEC clock trough clk-raspberrypi which uses the right PLL to get an accurate 108MHz. Signed-off-by: Dom Cobley <popcornmix@gmail.com> [iivanov: Adapted on top of v5.17-rc6] Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20220829152154.147250-4-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * | | clk: bcm: rpi: Handle pixel clock in firmwareIvan T. Ivanov2022-09-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clk-bcm2835 handling of the pixel clock does not function correctly when the HDMI power domain is disabled. The firmware supports it correctly, so add it to the firmware clock driver. Acked-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20220829152154.147250-3-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * | | clk: bcm: rpi: Add support HEVC clockIvan T. Ivanov2022-09-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Export clock required for RPiVid video decoder hardware. Cc: Dom Cobley <popcornmix@gmail.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20220829152154.147250-2-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * | | clk: bcm2835: fix bcm2835_clock_rate_from_divisor declarationStefan Wahren2022-09-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value of bcm2835_clock_rate_from_divisor is always unsigned and also all caller expect this. So fix the declaration accordingly. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220904141037.38816-1-stefan.wahren@i2se.com Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * | | clk: bcm2835: Round UART input clock upIvan T. Ivanov2022-09-301-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported that RPi3[1] and RPi Zero 2W boards have issues with the Bluetooth. It turns out that when switching from initial to operation speed host and device no longer can talk each other because host uses incorrect UART baud rate. The UART driver used in this case is amba-pl011. Original fix, see below Github link[2], was inside pl011 module, but somehow it didn't look as the right place to fix. Beside that this original rounding function is not exactly perfect for all possible clock values. So I deiced to move the hack to the platform which actually need it. The UART clock is initialised to be as close to the requested frequency as possible without exceeding it. Now that there is a clock manager that returns the actual frequencies, an expected 48MHz clock is reported as 47999625. If the requested baud rate == requested clock/16, there is no headroom and the slight reduction in actual clock rate results in failure. If increasing a clock by less than 0.1% changes it from ..999.. to ..000.., round it up. [1] https://bugzilla.suse.com/show_bug.cgi?id=1188238 [2] https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7 Cc: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220912081306.24662-1-iivanov@suse.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * | | clk: bcm2835: Make peripheral PLLC criticalMaxime Ripard2022-09-301-1/+1
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When testing for a series affecting the VEC, it was discovered that turning off and on the VEC clock is crashing the system. It turns out that, when disabling the VEC clock, it's the only child of the PLLC-per clock which will also get disabled. The source of the crash is PLLC-per being disabled. It's likely that some other device might not take a clock reference that it actually needs, but it's unclear which at this point. Let's make PLLC-per critical so that we don't have that crash. Reported-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * | | clk: baikal-t1: Convert to platform device driverSerge Semin2022-09-304-54/+226
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In accordance with the way the MIPS platform is normally design there are only six clock sources which need to be available on the kernel start in order to one end up booting correctly: + CPU PLL: needed by the r4k and MIPS GIC timer drivers. The former one is initialized by the arch code, while the later one is implemented in the mips-gic-timer.c driver as the OF-declared timer. + PCIe PLL: required as a parental clock source for the APB/timer domains. + APB clock: needed in order to access all the SoC CSRs at least for the timer OF-declared drivers. + APB Timer{0-2} clocks: these are the DW APB timers which drivers dw_apb_timer_of.c are implemented as the OF-declared timers. So as long as the clocks above are available early the kernel will normally work. Let's convert the Baikal-T1 CCU drivers to the platform device drivers keeping that in mind. Generally speaking the conversion isn't that complicated since the driver infrastructure has been designed as flexible enough for that. First we need to add a new PLL/Divider clock features flag which indicates the corresponding clock source as a basic one and that clock sources will be available on the kernel early boot stages. Second the internal PLL/Divider descriptors need to be initialized with -EPROBE_DEFER value as the corresponding clock source is unavailable at the early stages. They will be allocated and initialized on the Baikal-T1 clock platform driver probe procedure. Finally the already available PLL/Divider init functions need to be split up into two ones: init procedure performed in the framework of the OF-declared clock initialization (of_clk_init()), and the probe procedure called by the platform devices bus driver. Note the later method will just continue the system clocks initialization started in the former one. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-9-Sergey.Semin@baikalelectronics.ru [sboyd@kernel.org: Remove module things because the Kconfig is still bool] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * | | clk: baikal-t1: Add DDR/PCIe directly controlled resets supportSerge Semin2022-09-302-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aside with a set of the trigger-like resets Baikal-T1 CCU provides two additional blocks with directly controlled reset signals. In particular it concerns DDR full and initial resets and various PCIe sub-domains resets. Let's add the direct reset assertion/de-assertion of the corresponding flags support into the Baikal-T1 CCU driver then. It will be required at least for the PCIe platform driver. Obviously the DDR controller isn't supposed to be fully reset in the kernel, so the corresponding controls are added just for the sake of the interface implementation completeness. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220929225402.9696-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * | | clk: baikal-t1: Move reset-controls code into a dedicated moduleSerge Semin2022-09-307-105/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before adding the directly controlled resets support it's reasonable to move the existing resets control functionality into a dedicated object for the sake of the CCU dividers clock driver simplification. After the new functionality was added clk-ccu-div.c would have got to a mixture of the weakly dependent clocks and resets methods. Splitting the methods up into the two objects will make the code easier to read and maintain. It shall also improve the code scalability (though hopefully we won't need this part that much in the future). The reset control functionality is now implemented in the framework of a single unit since splitting it up doesn't make much sense due to relatively simple reset operations. The ccu-rst.c has been designed to be looking like ccu-div.c or ccu-pll.c with two globally available methods for the sake of the code unification and better code readability. This commit doesn't provide any change in the CCU reset implementation semantics. As before the driver will support the trigger-like CCU resets only, which are responsible for the AXI-bus, APB-bus and SATA-ref blocks reset. The assert/de-assert-capable reset controls support will be added in the next commit. Note the CCU Clock dividers and resets functionality split up was possible due to not having any side-effects (at least we didn't found ones) of the regmap-based concurrent access of the common CCU dividers/reset CSRs. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220929225402.9696-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * | | clk: baikal-t1: Add SATA internal ref clock bufferSerge Semin2022-09-303-1/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out the internal SATA reference clock signal will stay unavailable for the SATA interface consumer until the buffer on it's way is ungated. So aside with having the actual clock divider enabled we need to ungate a buffer placed on the signal way to the SATA controller (most likely some rudiment from the initial SoC release). Seeing the switch flag is placed in the same register as the SATA-ref clock divider at a non-standard ffset, let's implement it as a separate clock controller with the set-rate propagation to the parental clock divider wrapper. As such we'll be able to disable/enable and still change the original clock source rate. Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | * | | clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parentSerge Semin2022-09-303-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Baikal-T1 CCU reference manual says that both xGMAC reference and xGMAC PTP clocks are generated by two different wrappers with the same constant divider thus each producing a 156.25 MHz signal. But for some reason both of these clock sources are gated by a single switch-flag in the CCU registers space - CCU_SYS_XGMAC_BASE.BIT(0). In order to make the clocks handled independently we need to define a shared parental gate so the base clock signal would be switched off only if both of the child-clocks are disabled. Note the ID is intentionally set to -2 since we are going to add a one more internal clock identifier in the next commit. Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20220929225402.9696-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-02 10:43:08 +0100