summaryrefslogtreecommitdiffstats
path: root/drivers/devfreq (follow)
Commit message (Collapse)AuthorAgeFilesLines
* PM / devfreq: imx-bus: Use of_property_present()Rob Herring (Arm)2024-09-041-1/+1
| | | | | | | | | | | | | Use of_property_present() to test for property presence rather than of_get_property(). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Link: https://lore.kernel.org/lkml/20240731191312.1710417-11-robh@kernel.org/ Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpersAnand Moon2024-09-041-17/+5
| | | | | | | | | | | | | | | | The devm_clk_get_enabled() helpers: - call devm_clk_get() - call clk_prepare_enable() and register what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the calls to clk_disable_unprepare(). While at it, use dev_err_probe consistently, and use its return value to return the error code. Link: https://lore.kernel.org/lkml/20240510094034.12493-1-linux.amoon@gmail.com/ Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM/devfreq: governor: add missing MODULE_DESCRIPTION() macrosJeff Johnson2024-09-044-0/+4
| | | | | | | | | | | | | | make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_simpleondemand.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_performance.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_powersave.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_userspace.o Add all missing invocations of the MODULE_DESCRIPTION() macro. Link: https://lore.kernel.org/lkml/20240605-md-drivers-devfreq-v1-1-d01ae91b907e@quicinc.com/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functionsAnand Moon2024-05-081-6/+3
| | | | | | | | | | | | This macro has the advantage over SET_SYSTEM_SLEEP_PM_OPS that we don't have to care about when the functions are actually used. Also make use of pm_sleep_ptr() to discard all PM_SLEEP related stuff if CONFIG_PM_SLEEP isn't enabled. Link: https://lore.kernel.org/lkml/20240417044459.1908-2-linux.amoon@gmail.com/ Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rk3399_dmc: Convert to platform remove callback returning voidUwe Kleine-König2024-05-081-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning voidUwe Kleine-König2024-05-081-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: mtk-cci: Convert to platform remove callback returning voidUwe Kleine-König2024-05-081-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: exynos-ppmu: Convert to platform remove callback returning voidUwe Kleine-König2024-05-081-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: exynos-nocp: Convert to platform remove callback returning voidUwe Kleine-König2024-05-081-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Synchronize devfreq_monitor_[start/stop]Mukesh Ojha2023-12-181-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff889edc155c [ 9436.262227][ C4] x1 : ffffff8001005200 x0 : ffffff80444f0428 [ 9436.262232][ C4] Call trace: [ 9436.262236][ C4] expire_timers+0x9c/0x438 [ 9436.262240][ C4] __run_timers+0x1f0/0x330 [ 9436.262245][ C4] run_timer_softirq+0x28/0x58 [ 9436.262255][ C4] efi_header_end+0x168/0x5ec [ 9436.262265][ C4] __irq_exit_rcu+0x108/0x124 [ 9436.262274][ C4] __handle_domain_irq+0x118/0x1e4 [ 9436.262282][ C4] gic_handle_irq.30369+0x6c/0x2bc [ 9436.262286][ C4] el0_irq_naked+0x60/0x6c Link: https://lore.kernel.org/all/1700860318-4025-1-git-send-email-quic_mojha@quicinc.com/ Reported-by: Joyyoung Huang <huangzaiyang@oppo.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Convert to use sysfs_emit_at() APIChristian Marangi2023-11-131-20/+17
| | | | | | | | | | Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Link: https://lore.kernel.org/all/20231024183016.14648-3-ansuelsmth@gmail.com/ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Fix buffer overflow in trans_stat_showChristian Marangi2023-11-131-18/+39
| | | | | | | | | | | | | | | | | | | | | | | Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error. Link: https://lore.kernel.org/all/20231024183016.14648-2-ansuelsmth@gmail.com/ Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041 Fixes: e552bbaf5b98 ("PM / devfreq: Add sysfs node for representing frequency transition information.") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: add support for RK3588Sascha Hauer2023-10-191-1/+35
| | | | | | | | | | | | | | Add support for the RK3588 to the driver. The RK3588 has four DDR channels with a register stride of 0x4000 between the channel registers, also it has a DDRMON_CTRL register per channel. Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registersSascha Hauer2023-10-191-24/+49
| | | | | | | | | | | | | | | | | The currently supported RK3399 has a set of registers per channel, but it has only a single DDRMON_CTRL register. With upcoming RK3588 this will be different, the RK3588 has a DDRMON_CTRL register per channel. Instead of expecting a single DDRMON_CTRL register, loop over the channels and write the channel specific DDRMON_CTRL register. Break out early out of the loop when there is only a single DDRMON_CTRL register like on the RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-19-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: make register stride SoC specificSascha Hauer2023-10-191-4/+9
| | | | | | | | | | | | | | | The currently supported RK3399 has a stride of 20 between the channel specific registers. Upcoming RK3588 has a different stride, so put the stride into driver data to make it configurable. While at it convert decimal 20 to hex 0x14 for consistency with RK3588 which has a register stride 0x4000 and we want to write that in hex as well. Link: https://lore.kernel.org/all/20231018061714.3553817-18-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Add perf supportSascha Hauer2023-10-191-5/+435
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DFI is a unit which is suitable for measuring DDR utilization, but so far it could only be used as an event driver for the DDR frequency scaling driver. This adds perf support to the DFI driver. Usage with the 'perf' tool can look like: perf stat -a -e rockchip_ddr/cycles/,\ rockchip_ddr/read-bytes/,\ rockchip_ddr/write-bytes/,\ rockchip_ddr/bytes/ sleep 1 Performance counter stats for 'system wide': 1582524826 rockchip_ddr/cycles/ 1802.25 MB rockchip_ddr/read-bytes/ 1793.72 MB rockchip_ddr/write-bytes/ 3595.90 MB rockchip_ddr/bytes/ 1.014369709 seconds time elapsed perf support has been tested on a RK3568 and a RK3399, the latter with dual channel DDR. Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [cw00.choi: Fix typo from 'write_acccess' to 'write_access'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: give variable a better nameSascha Hauer2023-10-191-7/+12
| | | | | | | | | | | | | struct dmc_count_channel::total counts the clock cycles of the DDR controller. Rename it accordingly to give the reader a better idea what this is about. While at it, at some documentation to struct dmc_count_channel. Link: https://lore.kernel.org/all/20231018061714.3553817-16-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Prepare for multiple usersSascha Hauer2023-10-191-17/+40
| | | | | | | | | | | | | | | When adding perf support later the DFI must be enabled when either of devfreq-event or perf is active. Prepare for that by adding a usage counter for the DFI. Also move enabling and disabling of the clock away from the devfreq-event specific functions to which the perf specific part won't have access. Link: https://lore.kernel.org/all/20231018061714.3553817-15-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Pass private data struct to internal functionsSascha Hauer2023-10-191-9/+6
| | | | | | | | | | | | | The internal functions do not need the struct devfreq_event_dev *, so pass them the struct rockchip_dfi *. This is a preparation for adding perf support later which doesn't have a struct devfreq_event_dev *. Link: https://lore.kernel.org/all/20231018061714.3553817-14-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Handle LPDDR4XSascha Hauer2023-10-191-0/+1
| | | | | | | | | | | | | In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add the missing case. Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Handle LPDDR2 correctlySascha Hauer2023-10-191-2/+9
| | | | | | | | | | | | | | According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be set for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while at it turn the if/else if/else into switch/case which makes it easier to read. Link: https://lore.kernel.org/all/20231018061714.3553817-12-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Add RK3568 supportSascha Hauer2023-10-191-0/+27
| | | | | | | | | | This adds RK3568 support to the DFI driver. Only iniitialization differs from the currently supported RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Clean up DDR type register definesSascha Hauer2023-10-191-12/+21
| | | | | | | | | | | | | | | | | | Use the HIWORD_UPDATE() define known from other rockchip drivers to make the defines look less odd to the readers who've seen other rockchip drivers. The HIWORD registers have their functional bits in the lower 16 bits whereas the upper 16 bits contain a mask. Only the functional bits that have the corresponding mask bit set are modified during a write. Although the register writes look different, the end result should be the same, at least there's no functional change intended with this patch. Link: https://lore.kernel.org/all/20231018061714.3553817-10-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE definesSascha Hauer2023-10-192-9/+10
| | | | | | | | | | | | | | | | The DDRTYPE defines are named to be RK3399 specific, but they can be used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_ prefix with ROCKCHIP_. They are defined in a SoC specific header file, so when generalizing the prefix also move the new defines to a SoC agnostic header file. While at it use GENMASK to define the DDRTYPE bitfield and give it a name including the full register name. Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: introduce channel maskSascha Hauer2023-10-181-6/+19
| | | | | | | | | | | Different Rockchip SoC variants have a different number of channels. Introduce a channel mask to make the number of channels configurable from SoC initialization code. Link: https://lore.kernel.org/all/20231018061714.3553817-8-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Use free running counterSascha Hauer2023-10-181-22/+30
| | | | | | | | | | | | | | | | | | | | | | | | The DDR_MON counters are free running counters. These are resetted to 0 when starting them over like currently done when reading the current counter values. Resetting the counters becomes a problem with perf support we want to add later, because perf needs counters that are not modified elsewhere. This patch removes resetting the counters and keeps them running instead. That means we no longer use the absolute counter values but instead compare them with the counter values we read last time. Not stopping the counters also has the impact that they are running while we are reading them. We cannot read multiple timers atomically, so the values do not exactly fit together. The effect should be negligible though as the time between two measurements is some orders of magnitude bigger than the time we need to read multiple registers. Link: https://lore.kernel.org/all/20231018061714.3553817-7-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target()Dan Carpenter2023-10-171-1/+2
| | | | | | | | | | Call mutex_unlock(&drv->reg_lock) before returning the error code. Link: https://lore.kernel.org/all/1bada9b2-d276-4123-bfdf-03d165569543@moroto.mountain/ Fixes: d2805601988f ("PM / devfreq: mediatek: protect oop in critical session") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: exynos-ppmu: Use device_get_match_data()Rob Herring2023-10-091-10/+3
| | | | | | | | | | Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Link: https://lore.kernel.org/all/20231006213854.333261-1-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: dfi store raw values in counter structSascha Hauer2023-10-091-2/+2
| | | | | | | | | | | | When adding perf support to the DFI driver the perf part will need the raw counter values, so move the fixed * 4 factor to rockchip_dfi_get_event(). Link: https://lore.kernel.org/lkml/20230704093242.583575-6-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Add SoC specific init functionSascha Hauer2023-10-091-15/+33
| | | | | | | | | | Move the RK3399 specifics to a SoC specific init function to make the way free for supporting other SoCs later. Link: https://lore.kernel.org/lkml/20230704093242.583575-5-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: use consistent name for private data structSascha Hauer2023-10-091-36/+36
| | | | | | | | | | | | | The variable name for the private data struct is 'info' in some functions and 'data' in others. Both names do not give a clue what type the variable has, so consistently use 'dfi'. Link: https://lore.kernel.org/lkml/20230704093242.583575-4-s.hauer@pengutronix.de/ Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Embed desc into private data structSascha Hauer2023-10-091-6/+2
| | | | | | | | | | | | No need for an extra allocation, just embed the struct devfreq_event_desc into the private data struct. Link: https://lore.kernel.org/lkml/20230704093242.583575-3-s.hauer@pengutronix.de/ Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: rockchip-dfi: Make pmu regmap mandatorySascha Hauer2023-10-091-7/+8
| | | | | | | | | | | | As a matter of fact the regmap_pmu already is mandatory because it is used unconditionally in the driver. Bail out gracefully in probe() rather than crashing later. Link: https://lore.kernel.org/lkml/20230704093242.583575-2-s.hauer@pengutronix.de/ Fixes: b9d1262bca0af ("PM / devfreq: event: support rockchip dfi controller") Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Switch to dev_pm_opp_find_freq_{ceil/floor}_indexed() APIsManivannan Sadhasivam2023-10-091-7/+7
| | | | | | | | | | | | | | | Some devfreq consumers like UFS driver need to work with multiple clocks through the OPP framework. For this reason, OPP framework exposes the _indexed() APIs for finding the floor/ceil of the supplied frequency of the indexed clock. So let's use them in the devfreq driver. Currently, the clock index of 0 is used which works fine for multiple as well as single clock. Link: https://lore.kernel.org/all/20231003111232.42663-3-manivannan.sadhasivam@linaro.org/ Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: mediatek: protect oop in critical sessionMark Tseng2023-10-091-3/+3
| | | | | | | | | mtk_ccifreq_opp_notifier is reenter function when policy0 / policy6 change freq, so mutex_lock should protect all OPP event. Link: https://lore.kernel.org/lkml/20230818021741.6173-1-chun-jen.tseng@mediatek.com/T/ Signed-off-by: Mark Tseng <chun-jen.tseng@mediatek.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Fix leak in devfreq_dev_release()Boris Brezillon2023-08-101-0/+1
| | | | | | | | | | | | | srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak. Fixes: 0fe3a66410a3 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() APIManivannan Sadhasivam2023-07-231-4/+5
| | | | | | | | | | | Current kernel-doc comment doesn't specify the default timer used for the load monitoring. Also, it uses the term "default delayed work" which could be misunderstood as "default delayer timer". So reword the comment to clearly specify the default timer and also reword the last sentence to make it more understandable. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Explicitly include correct DT includesRob Herring2023-07-234-4/+3
| | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: mtk-cci: Fix variable deferencing before NULL checkSukrut Bellary2023-05-291-1/+2
| | | | | | | | | | | smatch warning: drivers/devfreq/mtk-cci-devfreq.c:135 mtk_ccifreq_target() warn: variable dereferenced before check 'drv' (see line 130) This is based on static analysis only. Compilation tested. Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: exynos: add Exynos PPMU as a soft module dependencyMarek Szyprowski2023-05-291-0/+1
| | | | | | | | | | | | | | | | | | Commit adf8238ef403 ("ARM: dts: exynos: move exynos-bus nodes out of soc in Exynos4412") changed the order of the exynos-bus nodes, what results in different probe order of the Exynos Bus devices. Although the driver properly handles the deferred probe and all devices seems to be finally properly registered, this change revealed some kind of a bug related to PPMU counters registration and passive governor operation. Usually in 1 of 10 boots this results in complete board freeze during loading of the kernel modules. To avoid that freeze, ensure that the Exynos PPMU driver is already loaded before the Exynos Bus driver starts probing. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds2023-04-272-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
| * driver core: class: remove module * from class_create()Greg Kroah-Hartman2023-03-172-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The module pointer in class_create() never actually did anything, and it shouldn't have been requred to be set as a parameter even if it did something. So just remove it and fix up all callers of the function in the kernel tree at the same time. Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()Yang Li2023-04-031-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | According to commit 890cc39a8799 ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | PM / devfreq: exynos: Use of_property_present() for testing DT property presenceRob Herring2023-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | PM / devfreq: exyos-bus: drop of_match_ptr for ID tableKrzysztof Kozlowski2023-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/devfreq/exynos-bus.c:504:34: error: ‘exynos_bus_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | PM / devfreq: Remove "select SRCU"Paul E. McKenney2023-03-131-1/+0
|/ | | | | | | | | Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: event: use devm_platform_get_and_ioremap_resource()Minghao Chi2022-12-051-2/+1
| | | | | | | | | | Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: event: Use device_match_of_node()ye xingchen2022-12-051-1/+1
| | | | | | | Replace the open-code with device_match_of_node(). Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM / devfreq: Use device_match_of_node()ye xingchen2022-12-031-1/+1
| | | | | | | Replace the open-code with device_match_of_node(). Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* PM/devfreq: governor: Add a private governor_data for governorKant Fan2022-11-202-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The member void *data in the structure devfreq can be overwrite by governor_userspace. For example: 1. The device driver assigned the devfreq governor to simple_ondemand by the function devfreq_add_device() and init the devfreq member void *data to a pointer of a static structure devfreq_simple_ondemand_data by the function devfreq_add_device(). 2. The user changed the devfreq governor to userspace by the command "echo userspace > /sys/class/devfreq/.../governor". 3. The governor userspace alloced a dynamic memory for the struct userspace_data and assigend the member void *data of devfreq to this memory by the function userspace_init(). 4. The user changed the devfreq governor back to simple_ondemand by the command "echo simple_ondemand > /sys/class/devfreq/.../governor". 5. The governor userspace exited and assigned the member void *data in the structure devfreq to NULL by the function userspace_exit(). 6. The governor simple_ondemand fetched the static information of devfreq_simple_ondemand_data in the function devfreq_simple_ondemand_func() but the member void *data of devfreq was assigned to NULL by the function userspace_exit(). 7. The information of upthreshold and downdifferential is lost and the governor simple_ondemand can't work correctly. The member void *data in the structure devfreq is designed for a static pointer used in a governor and inited by the function devfreq_add_device(). This patch add an element named governor_data in the devfreq structure which can be used by a governor(E.g userspace) who want to assign a private data to do some private things. Fixes: ce26c5bb9569 ("PM / devfreq: Add basic governors") Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kant Fan <kant@allwinnertech.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 12:50:39 +0100