summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/lontium-lt9611.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drm/bridge: lt9611: properly program the dual host modeDmitry Baryshkov2023-01-181-15/+13
| | | | | | | | | | | If the bridge is connected using both DSI ports, the driver should use both of them all the time. Correct programming sequence to always use dual-port mode if both dsi0 and dsi1 are connected. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-14-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: stop filtering modes via the tableDmitry Baryshkov2023-01-181-37/+12
| | | | | | | | | | | The lt9611 bridge can support different modes, it makes no sense to list them in the table. Drop the table and check the number of interfaces using the fixed value. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-13-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: rework infoframes handlingDmitry Baryshkov2023-01-181-13/+44
| | | | | | | | | | | | Rework handling infoframes: - Write full HDMI AVI infoframe instead of just fixing the VIC value - Also send the HDMI Vendor Specific infoframe, as recommended by the HDMI spec. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-12-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: simplify video timings programmingDmitry Baryshkov2023-01-181-2/+2
| | | | | | | | | | Inline calculated values to simplify the calculation in lt9611_mipi_video_setup(). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-11-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: fix sync polarity for DVI outputDmitry Baryshkov2023-01-181-3/+6
| | | | | | | | | | | Attaching DVI sink to the lt9611 requires different setup. Fix the register write to make the DVI displays sync onto the correct sync pulse. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-10-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: attach to the next bridgeDmitry Baryshkov2023-01-181-92/+7
| | | | | | | | | | | | | | | | The bindings require that there is a next bridge after the lt9611. If nothing else it can be the hdmi-connector (as used on the RB3 platform, see sdm845-db845c.dts). Bring in the next bridge into the drm bridges chain and attach to it. Since lt9611 is not anymore the last bridge in the chain, this also allows us to drop all the !DRM_BRIDGE_ATTACH_NO_CONNECTOR functionality. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-9-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: rework the mode_set functionDmitry Baryshkov2023-01-181-25/+36
| | | | | | | | | | | | The mode_set callback is deprectated for drm_bridges in favour of using atomic_enable callback. Move corresponding code into the function lt9611_bridge_atomic_enable() and turn lt9611_bridge_pre_enable() into the proper atomic_pre_enable callback. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-8-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: pass a pointer to the of nodeDmitry Baryshkov2023-01-181-1/+1
| | | | | | | | | | Pass a pointer to the OF node while registering lt9611 MIPI device. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: fix clock calculationDmitry Baryshkov2023-01-181-18/+14
| | | | | | | | | | | | Instead of having several fixed values for the pcr register, calculate it before programming. This allows the bridge to support most of the display modes. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: fix programming of video modesDmitry Baryshkov2023-01-181-1/+2
| | | | | | | | | | Program the upper part of the hfront_porch into the proper register. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-5-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: fix polarity programmingDmitry Baryshkov2023-01-181-5/+12
| | | | | | | | | | Fix programming of hsync and vsync polarities Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-4-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: fix HPD reenablementDmitry Baryshkov2023-01-181-2/+8
| | | | | | | | | | | | | The driver will reset the bridge in the atomic_pre_enable(). However this will also drop the HPD interrupt state. Instead of resetting the bridge, properly wake it up. This fixes the HPD interrupt delivery after the disable/enable cycle. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-3-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: fix sleep mode setupDmitry Baryshkov2023-01-181-3/+2
| | | | | | | | | | | | | On atomic_post_disable the bridge goes to the low power state. However the code disables too much of the chip, so the HPD event is not being detected and delivered to the host. Reduce the power saving in order to get the HPD event. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org
* drm/bridge: lt9611: Fix PLL being unable to lockRobert Foss2022-12-151-0/+1
| | | | | | | | | | | | | | | This fixes PLL being unable to lock, and is derived from an equivalent downstream commit. Available LT9611 documentation does not list this register, neither does LT9611UXC (which is a different chip). This commit has been confirmed to fix HDMI output on DragonBoard 845c. Suggested-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221213150304.4189760-1-robert.foss@linaro.org
* drm/bridge: lt9611: Convert to i2c's .probe_new()Uwe Kleine-König2022-12-091-3/+2
| | | | | | | | | | The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-25-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
* Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2022-10-051-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
| * gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()Zeng Jingxiang2022-08-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | A NULL check for bridge->encoder shows that it may be NULL, but it already been dereferenced on all paths leading to the check. 812 if (!bridge->encoder) { Dereference the pointer bridge->encoder. 810 drm_connector_attach_encoder(&lt9611->connector, bridge->encoder); Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com
* | i2c: Make remove callback return voidUwe Kleine-König2022-08-161-3/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* drm: Remove linux/i2c.h from drm_crtc.hVille Syrjälä2022-07-051-0/+1
| | | | | | | | | | | | | | | | | drm_crtc.h has no need for linux/i2c.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/i2c.h. Quite a few placs do currently depend on linux/i2c.h without actually including it directly. All of those need to be fixed up. v2: imx and mcde need linux/io.h for readl()/etc. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-5-ville.syrjala@linux.intel.com
* drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä2022-07-051-0/+1
| | | | | | | | | | | | | | | | | | drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
* drm/bridge: lt9611: Use both bits for HDMI sensingJohn Stultz2022-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing"), the bit flag used to detect HDMI cable connect was switched from BIT(2) to BIT(0) to improve compatibility with some monitors that didn't seem to set BIT(2). However, with that change, I've seen occasional issues where the detection failed, because BIT(2) was set, but not BIT(0). Unfortunately, as I understand it, the bits and their function was never clearly documented. So lets instead check both (BIT(2) | BIT(0)) when checking the register. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Fixes: 19cf41b64e3b ("lontium-lt9611: check a different register bit for HDMI sensing") Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com
* drm/bridge: lt9611: Consolidate detection logicJohn Stultz2022-05-231-14/+8
| | | | | | | | | | | | | | | | | | This patch simply consolidates the duplicated detection functionality in the driver. Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-1-jstultz@google.com
* drm/bridge: lt9611: Add atomic_get_input_bus_fmtsMarek Vasut2022-03-311-0/+27
| | | | | | | | | | | | | | | | Implement .atomic_get_input_bus_fmts callback, which sets up the input (scanout-engine-end) formats, so that those formats can then be used in pipeline format negotiation between this bridge and the scanout engine. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dave Airlie <airlied@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331153923.14314-2-marex@denx.de
* drm/bridge: lt9611: Switch to atomic operationsMarek Vasut2022-03-311-6/+16
| | | | | | | | | | | | | | | Use the atomic version of the enable/disable operations to continue the transition to the atomic API. This will be needed to access the mode from the atomic state. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dave Airlie <airlied@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331153923.14314-1-marex@denx.de
* drm/bridge: lt9611: Fix an error handling path in lt9611_probe()Christophe JAILLET2022-01-311-1/+5
| | | | | | | | | | | | | If lt9611_audio_init() fails, some resources still need to be released before returning an error code. Add the missing goto the error handling path. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/9c20eb74d42f6d4128e58e3e46aa320482472b77.1643468761.git.christophe.jaillet@wanadoo.fr Reviewed-by: Robert Foss <robert.foss@linaro.org>
* drm/bridge: Remove extra device acquisition method of i2c client in lt9611 ↵Zhiming Liu2022-01-191-2/+2
| | | | | | | | | | | | driver We have got the device of i2c client in probe function. So we should remove extra device acquisition method of i2c client. Signed-off-by: Zhiming Liu <lzmlzmhh@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220117154150.5145-1-lzmlzmhh@gmail.com Reviewed-by: Robert Foss <robert.foss@linaro.org>
* lontium-lt9611: check a different register bit for HDMI sensingPeter Collingbourne2021-11-301-2/+2
| | | | | | | | | | | | | | It has been observed that with certain monitors such as the HP Z27n, the register 0x825e reads a value of 0x79 when the HDMI cable is connected and 0x78 when it is disconnected, i.e. bit 0 appears to correspond to the HDMI connection status and bit 2 is never set. Therefore, change the driver to check bit 0 instead of bit 2. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I7e76411127e1ce4988a3f6d0c8ba5f1c3d880c23 Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211117020724.2647769-1-pcc@google.com
* drm/bridge: lt9611: Register and attach our DSI device at probeMaxime Ripard2021-10-271-19/+19
| | | | | | | | | | | In order to avoid any probe ordering issue, the best practice is to move the secondary MIPI-DSI device registration and attachment to the MIPI-DSI host at probe time. Let's do this. Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-9-maxime@cerno.tech
* drm/bridge: lt9611: Switch to devm MIPI-DSI helpersMaxime Ripard2021-10-271-20/+4
| | | | | | | | | | Let's switch to the new devm MIPI-DSI function to register and attach our secondary device. Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-8-maxime@cerno.tech
* drm/bridge: lt9611: Add missing MODULE_DEVICE_TABLEZou Wei2021-05-171-0/+1
| | | | | | | | | | | | This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1620801955-19188-1-git-send-email-zou_wei@huawei.com
* drm/bridge: lt9611: Fix handling of 4k panelsRobert Foss2021-03-251-1/+7
| | | | | | | | | | | | | | | | 4k requires two dsi pipes, so don't report MODE_OK when only a single pipe is configured. But rather report MODE_PANEL to signal that requirements of the panel are not being met. Reported-by: Peter Collingbourne <pcc@google.com> Suggested-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Anibal Limon <anibal.limon@linaro.org> Tested-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201217140933.1133969-1-robert.foss@linaro.org
* drm/bridge: Fix the dsi remote end-pointsVinod Koul2020-08-291-2/+2
| | | | | | | | | | | DSI end-points are supposed to be at node 0 and node 1 as per binding. So fix this and use node 0 and node 1 for dsi. Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
* drm/bridge: Introduce LT9611 DSI to HDMI bridgeVinod Koul2020-07-261-0/+1230
Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # fix lt9611_bridge_mode_valid Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 09:24:49 +0100