summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/ti-sn65dsi83.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()Uwe Kleine-König2022-12-121-3/+3
| | | | | | | | | | .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-36-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
* drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match specFrieder Schrempf2022-11-241-1/+1
| | | | | | | | | | | | The datasheet specifies a delay of 10 milliseconds, but the current driver only waits for 1 ms. Fix this to make sure the initialization sequence meets the spec. Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221122081219.20143-1-frieder@fris.de
* i2c: Make remove callback return voidUwe Kleine-König2022-08-161-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä2022-07-051-0/+1
| | | | | | | | | | | | | | | | | | drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
* drm/bridge: ti-sn65dsi83: Allow GPIO operations to sleepAlexander Stein2022-06-201-2/+2
| | | | | | | | | | There is no need to require non-sleeping GPIO access. Silence the WARN_ON() if GPIO is using e.g. I2C expanders. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-2-alexander.stein@ew.tq-group.com Reviewed-by: Robert Foss <robert.foss@linaro.org>
* drm/bridge: ti-sn65dsi83: add more dev_err_probeAlexander Stein2022-06-201-2/+2
| | | | | | | | | | Add more warning/debug messages during probe. E.g. a single -EPROBE_DEFER might have several causes, these messages help finding the origin. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095835.1398708-1-alexander.stein@ew.tq-group.com Reviewed-by: Robert Foss <robert.foss@linaro.org>
* drm/bridge: ti-sn65dsi83: Convert to drm_of_get_data_lanes_countMarek Vasut2022-06-121-1/+1
| | | | | | | | | | | | | | | | | Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612102947.13912-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Do not cache dsi_lanes and host twiceMarek Vasut2022-06-121-42/+22
| | | | | | | | | | | | | | | | | | | | | The DSI lane count can be accessed via the dsi device pointer, make use of that. The DSI host pointer is only used in sn65dsi83_host_attach(), move the code around so that the host does not have to be cached in the driver private data. This simplifies the code further. No functional change. This has the added bonus that lt9211, tc358767, sn65dsi83 now use very similar *_mipi_dsi_host_attach() which is ripe for deduplication. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612102918.13874-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalidMarek Vasut2022-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | Handle empty data-lanes = < >; property, which translates to dsi_lanes = 0 as invalid. Fixes: ceb515ba29ba6 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Check link status register after enabling the bridgeMarek Vasut2022-03-311-0/+5
| | | | | | | | | | | | | | | | In rare cases, the bridge may not start up correctly, which usually leads to no display output. In case this happens, warn about it in the kernel log. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220213022648.495895-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: switch to devm_drm_of_get_bridgeJosé Expósito2022-03-081-9/+3
| | | | | | | | | | | The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220228183724.25030-1-jose.exposito89@gmail.com
* drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()Christophe JAILLET2022-01-031-9/+23
| | | | | | | | | | | | sn65dsi83_parse_dt() takes a reference on 'ctx->host_node' that must be released in the error handling path of this function and of the probe. This is only done in the remove function up to now. Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/4bc21aed4b60d3d5ac4b28d8b07a6fdd8da6a536.1640768126.git.christophe.jaillet@wanadoo.fr
* drm/bridge: ti-sn65dsi83: Add vcc supply regulator supportAlexander Stein2021-12-211-0/+18
| | | | | | | | | VCC needs to be enabled before releasing the enable GPIO. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211213133626.2498056-5-alexander.stein@ew.tq-group.com
* drm/bridge: ti-sn65dsi83: Make enable GPIO optionalAlexander Stein2021-12-211-1/+2
| | | | | | | | | | | | | The enable signal may not be controllable by the kernel. Make it optional. This is a similar to commit bbda1704fc15 ("drm/bridge: ti-sn65dsi86: Make enable GPIO optional") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211213133626.2498056-3-alexander.stein@ew.tq-group.com
* drm/bridge: sn65dsi83: Register and attach our DSI device at probeMaxime Ripard2021-10-271-34/+46
| | | | | | | | | | | In order to avoid any probe ordering issue, the best practice is to move the secondary MIPI-DSI device registration and attachment to the MIPI-DSI host at probe time. Let's do this. Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-16-maxime@cerno.tech
* drm/bridge: sn65dsi83: Switch to devm MIPI-DSI helpersMaxime Ripard2021-10-271-9/+3
| | | | | | | | | | | Let's switch to the new devm MIPI-DSI function to register and attach our secondary device. This also avoids leaking the device when we detach the bridge but don't remove its driver. Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-15-maxime@cerno.tech
* drm/bridge: sn65dsi83: Fix bridge removalMaxime Ripard2021-10-271-1/+1
| | | | | | | | | | | | | | | | Commit 24417d5b0c00 ("drm/bridge: ti-sn65dsi83: Implement .detach callback") moved the unregistration of the bridge DSI device and bridge itself to the detach callback. While this is correct for the DSI device detach and unregistration, the bridge is added in the driver probe, and should thus be removed as part of its remove callback. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Marek Vasut <marex@denx.de> Fixes: 24417d5b0c00 ("drm/bridge: ti-sn65dsi83: Implement .detach callback") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-14-maxime@cerno.tech
* drm/bridge: ti-sn65dsi83: Optimize reset line togglingMarek Vasut2021-10-171-29/+11
| | | | | | | | | | | | | | | | | | | | | | | | | Current code always sets reset line low in .pre_enable callback and holds it low for 10ms. This is sub-optimal and increases the time between enablement of the DSI83 and valid LVDS clock. Rework the reset handling such that the reset line is held low for 10ms both in probe() of the driver and .disable callback, which guarantees that the reset line was always held low for more than 10ms and therefore the reset line timing requirement is satisfied. Furthermore, move the reset handling into .enable callback so the entire DSI83 initialization is now in one place. This reduces DSI83 enablement delay by up to 10ms. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211016210402.171595-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Implement .detach callbackMarek Vasut2021-10-081-3/+14
| | | | | | | | | | | | | | | | | Move detach implementation from sn65dsi83_remove() to dedicated .detach callback. There is no functional change to the code, but that detach is now in the correct location. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210907024038.871299-1-marex@denx.de
* drm: bridge: ti-sn65dsi83: Retrieve the display mode from the stateLaurent Pinchart2021-06-221-23/+26
| | | | | | | | | | | | Instead of storing a copy of the display mode in the sn65dsi83 structure, retrieve it from the atomic state in sn65dsi83_atomic_enable(). This allows the removal of the .mode_set() operation, and completes the transition to the atomic API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-6-laurent.pinchart@ideasonboard.com
* drm: bridge: ti-sn65dsi83: Retrieve output format from bridge stateLaurent Pinchart2021-06-221-37/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver currently iterates over all connectors to get the bus format, used to configure the LVDS output format. This causes several issues: - If other connectors than the LVDS output are present, the format used by the driver may end up belonging to an entirely different output. - The code can crash if some connectors are not connected, as bus_format may then be NULL. - There's no guarantee that the bus format on the connector at the output of the pipeline matches the output of the sn65dsi83, as there may be other bridges in the pipeline. Solve this by retrieving the format from the bridge state instead, which provides the format corresponding to the output of the bridge. The struct sn65dsi83 lvds_format_24bpp and lvds_format_jeida fields are moved to local variables in sn65dsi83_atomic_enable() as they're now used in that function only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-5-laurent.pinchart@ideasonboard.com
* drm: bridge: ti-sn65dsi83: Switch to atomic operationsLaurent Pinchart2021-06-221-11/+15
| | | | | | | | | | | | Use the atomic version of the enable/disable operations to continue the transition to the atomic API, started with the introduction of .atomic_get_input_bus_fmts(). This will be needed to access the mode from the atomic state. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-4-laurent.pinchart@ideasonboard.com
* drm: bridge: ti-sn65dsi83: Pass mode explicitly to helper functionsLaurent Pinchart2021-06-221-6/+8
| | | | | | | | | | | Pass the display mode explicitly to the sn65dsi83_get_lvds_range() and sn65dsi83_get_dsi_range() functions to prepare for its removal from the sn65dsi83 structure. This is not meant to bring any functional change. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-3-laurent.pinchart@ideasonboard.com
* drm: bridge: ti-sn65dsi83: Move LVDS format selection to .mode_set()Laurent Pinchart2021-06-221-12/+2
| | | | | | | | | | | | The LVDS format is selected based on the bus format reported by the connector. This is currently done in .mode_fixup(), but that's not the right place, as the format should be selected when setting the mode. Move it to .mode_set(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210621125518.13715-2-laurent.pinchart@ideasonboard.com
* drm/bridge: ti-sn65dsi83: Replace connector format patching with ↵Marek Vasut2021-06-211-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | atomic_get_input_bus_fmts Patching the connector format is causing various problematic side effects. Implement .atomic_get_input_bus_fmts callback instead, which sets up the input (DSI-end) format, and that format can then be used in pipeline format negotiation between the DSI-end of this bridge and the other component closer to the scanout engine. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adam Ford <aford173@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224208.184719-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Fix sparse warningsMarek Vasut2021-06-091-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following sparse warnings generated by "make C=1": drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: expected unsigned short [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: got restricted __le16 [usertype] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adam Ford <aford173@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Marek Vasut <marex@denx.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210608142211.82333-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Fix syntax formatting issuesMarek Vasut2021-06-081-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | Fix checkpatch.pl --strict -f drivers/gpu/drm/bridge/ti-sn65dsi83.c CHECKs, no functional change. This is the same modification done to V7 of the original patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adam Ford <aford173@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Marek Vasut <marex@denx.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> To: dri-devel@lists.freedesktop.org Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210608095322.23644-1-marex@denx.de
* drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driverMarek Vasut2021-06-081-0/+709
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on, but easy to add. The driver operates the chip via I2C bus. Currently the LVDS clock are always derived from DSI clock lane, which is the usual mode of operation. Support for clock from external oscillator is not implemented, but it is easy to add if ever needed. Only RGB888 pixel format is implemented, the LVDS666 is not supported, but could be added if needed. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 09:24:21 +0100