summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drm/msm/dsi: Add phy configuration for MSM8937Daniil Titov2024-06-251-0/+1
| | | | | | | | | | | | | Add phy configuration for 28nm dsi phy found on MSM8937 SoC. Only difference from existing msm8916 configuration is number of phy and io_start addresses. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/600518/ Link: https://lore.kernel.org/r/20240623-dsi-v2-4-a0ca70fb4846@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Remove dsi_phy_write_[un]delay()Konrad Dybcio2024-06-231-3/+0
| | | | | | | | | | | These are dummy wrappers that do literally nothing interesting. Remove them. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/590703/ Link: https://lore.kernel.org/r/20240423-topic-msm_cleanup-v1-2-b30f39f43b90@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Remove dsi_phy_read/write()Konrad Dybcio2024-06-231-2/+0
| | | | | | | | | | | These are dummy wrappers that do literally nothing interesting. Remove them. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/590700/ Link: https://lore.kernel.org/r/20240423-topic-msm_cleanup-v1-1-b30f39f43b90@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm: Drop msm_read/writelKonrad Dybcio2024-04-221-4/+4
| | | | | | | | | | Totally useless. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Patchwork: https://patchwork.freedesktop.org/patch/588804/ Link: https://lore.kernel.org/r/20240410-topic-msm_rw-v1-1-e1fede9ffaba@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm: dsi: add support for DSI-PHY on SM8650Neil Armstrong2023-12-051-0/+1
| | | | | | | | | | Add DSI PHY support for the SM8650 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/564976/ Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-mdss-v2-7-43f1887c82b8@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Add phy configuration for MSM8226Luca Weiss2023-06-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | MSM8226 uses a modified PLL lock sequence compared to MSM8974, which is based on the function dsi_pll_enable_seq_m in the msm-3.10 kernel. Worth noting that the msm-3.10 downstream kernel also will try other sequences in case this one doesn't work, but during testing it has shown that the _m sequence succeeds first time also: .pll_enable_seqs[0] = dsi_pll_enable_seq_m, .pll_enable_seqs[1] = dsi_pll_enable_seq_m, .pll_enable_seqs[2] = dsi_pll_enable_seq_d, .pll_enable_seqs[3] = dsi_pll_enable_seq_d, .pll_enable_seqs[4] = dsi_pll_enable_seq_f1, .pll_enable_seqs[5] = dsi_pll_enable_seq_c, .pll_enable_seqs[6] = dsi_pll_enable_seq_e, We may need to expand this in the future. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/540618/ Link: https://lore.kernel.org/r/20230308-msm8226-mdp-v3-6-b6284145d67a@z3ntu.xyz Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Add phy configuration for SM6375Konrad Dybcio2023-01-221-0/+1
| | | | | | | | | | SM6375 uses a boring standard 7nm PHY. Add a configuration entry for it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/518511/ Link: https://lore.kernel.org/r/20230116114059.346327-2-konrad.dybcio@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: add support for DSI-PHY on SM8550Neil Armstrong2023-01-221-0/+1
| | | | | | | | | | | SM8550 use a 4nm DSI PHYs, which share register definitions with 7nm DSI PHYs. Rather than duplicating the driver, handle 4nm variant inside the common 5+7nm driver. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/517515/ Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-mdss-dsi-v3-6-660c3bcb127f@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450Dmitry Baryshkov2023-01-221-0/+2
| | | | | | | | | | | | | | | | | SM8350 and SM8450 use 5nm DSI PHYs, which share register definitions with 7nm DSI PHYs. Rather than duplicating the driver, handle 5nm variants inside the common 5+7nm driver. Co-developed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/514230/ Link: https://lore.kernel.org/r/20221207012231.112059-7-dmitry.baryshkov@linaro.org [DB: changed compatibles per Krzysztof's request] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Add phy configuration for QCM2290Loic Poulain2022-11-041-0/+1
| | | | | | | | | | | | | | The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not fully compatible with the standard 14nm PHY, so it requires a separate compatible and config entry. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [DB: rebased and updated commit msg] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/504578/ Link: https://lore.kernel.org/r/20220924121900.222711-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Take advantage of devm_regulator_bulk_get_const()Douglas Anderson2022-09-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of the commit 1de452a0edda ("regulator: core: Allow drivers to define their init data as const") we no longer need to do copying of regulator bulk data from initdata to something dynamic. Let's take advantage of that. In addition to saving some code, this also moves us to using ARRAY_SIZE() to specify how many regulators we have which is less error prone. This gets rid of some layers of wrappers which makes it obvious that we can get rid of an extra error print. devm_regulator_bulk_get_const() prints errors for you so you don't need an extra layer of printing. In all cases here I have preserved the old settings without any investigation about whether the loads being set are sensible. In the cases of some of the PHYs if several PHYs in the same file used exactly the same settings I had them point to the same data structure. NOTE: Though I haven't done the math, this is likely an overall savings in terms of "static const" data. We previously always allocated space for 8 supplies. Each of these supplies took up 36 bytes of data (32 for name, 4 for an int). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496325/ Link: https://lore.kernel.org/r/20220804073608.v4.5.I55a9e65cb1c22221316629e98768ff473f47a067@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: Add dsi phy tuning configuration supportRajeev Nandan2022-02-181-0/+4
| | | | | | | | | | | Add support for MSM DSI PHY tuning configuration. Current design is to support drive strength and drive level/amplitude tuning for 10nm PHY version, but this can be extended to other PHY versions. Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1643573719-32095-3-git-send-email-quic_rajeevny@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* drm/msm/dsi: Add phy configuration for MSM8953Vladimir Lypak2021-10-151-0/+1
| | | | | | | | | | | | Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only difference from existing configurations are io_start addresses. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Link: https://lore.kernel.org/r/20210928131929.18567-3-sireeshkodali1@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: add continuous clock support for 7nm PHYDmitry Baryshkov2021-08-111-0/+1
| | | | | | | | | | | Unlike previous generations, 7nm PHYs are required to collaborate with the host for continuos clock mode. Add changes neccessary to enable continuous clock mode in the 7nm DSI PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org [Fix merge conflict, and $description typo] Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: Add PHY configuration for SC7280Rajeev Nandan2021-08-071-0/+1
| | | | | | | | | | | | The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver with different enable|disable regulator loads. Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1624365748-24224-3-git-send-email-rajeevny@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: support CPHY mode for 7nm pll/phyJonathan Marek2021-08-071-0/+3
| | | | | | | | | | | | | Add the required changes to support 7nm pll/phy in CPHY mode. This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable the CPHY mode. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: add DSI PHY registers to snapshot dataDmitry Baryshkov2021-06-231-0/+4
| | | | | | | | | | Add DSI PHY registers to the msm state snapshots to be able to check their contents. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210427001828.2375555-5-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: stop passing src_pll_id to the phy_enable callDmitry Baryshkov2021-04-071-1/+1
| | | | | | | | | | | | | | Phy driver already knows the source PLL id basing on the set usecase and the current PLL id. Stop passing it to the phy_enable call. As a reminder, dsi manager will always use DSI 0 as a clock master in a slave mode, so PLL 0 is always a clocksource for DSI 0 and it is always a clocksource for DSI 1 too unless DSI 1 is used in the standalone mode. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210331105735.3690009-25-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: inline msm_dsi_phy_set_src_pllDmitry Baryshkov2021-04-071-8/+0
| | | | | | | | | | | | The src_truthtable config is not used for some of phys, which use other means of configuring the master/slave usecases. Inline this function with the goal of removing src_pll_id argument in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210331105735.3690009-24-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: move ioremaps to dsi_phy_driver_probeDmitry Baryshkov2021-04-071-0/+1
| | | | | | | | | | | | | All PHY drivers would map dsi_pll area. Some PHY drivers would also map dsi_phy area again (a leftover from old PHY/PLL separation). Move all ioremaps to the common dsi_phy driver code and drop individual ioremapped areas from PHY drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-21-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: drop PLL accessor functionsDmitry Baryshkov2021-04-071-22/+2
| | | | | | | | | | | Replace PLL accessor functions (pll_read/pll_write*) with the DSI PHY accessors, reducing duplication. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-20-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: drop msm_dsi_pll abstractionDmitry Baryshkov2021-04-071-11/+25
| | | | | | | | | | | | Drop the struct msm_dsi_pll abstraction, by including vco's clk_hw directly into struct msm_dsi_phy. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210331105735.3690009-19-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: make save_state/restore_state callbacks accept msm_dsi_phyDmitry Baryshkov2021-04-071-7/+4
| | | | | | | | | | | | Make save_state/restore callbacks accept struct msm_dsi_phy rather than struct msm_dsi_pll. This moves them to struct msm_dsi_phy_ops, allowing us to drop struct msm_dsi_pll_ops. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210331105735.3690009-18-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msi/dsi: inline msm_dsi_pll_helper_clk_prepare/unprepareDmitry Baryshkov2021-04-071-2/+0
| | | | | | | | | | | | | 10nm and 7nm already do not use these helpers, as they handle setting slave DSI clocks after enabling VCO. Modify the rest of PHY drivers to remove unnecessary indirection and drop enable_seq/disable_seq PLL callbacks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-17-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: make save/restore_state phy-level functionsDmitry Baryshkov2021-04-071-0/+11
| | | | | | | | | | | Morph msm_dsi_pll_save/restore_state() into msm_dsi_phy_save/restore_state(), thus removing last bits of knowledge about msm_dsi_pll from dsi_manager. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-14-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: use devm_clk_*register to registe DSI PHY clocksDmitry Baryshkov2021-04-071-1/+0
| | | | | | | | | | | Use devres-enabled version of clock registration functions. This lets us remove dsi_pll destroy callbacks completely. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-12-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: push provided clocks handling into a generic codeDmitry Baryshkov2021-04-071-3/+6
| | | | | | | | | | | | All MSM DSI PHYs provide two clocks: byte and pixel ones. Register/unregister provided clocks from the generic place, removing boilerplate code from all MSM DSI PHY drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-11-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: remove msm_dsi_pll_set_usecaseDmitry Baryshkov2021-04-071-2/+0
| | | | | | | | | | | | msm_dsi_pll_set_usecase() function is not used outside of individual DSI PHY drivers, so drop it in favour of calling the the respective set_usecase functions directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-10-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: move min/max PLL rate to phy configDmitry Baryshkov2021-04-071-0/+3
| | | | | | | | Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-9-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: drop global msm_dsi_phy_type enumarationDmitry Baryshkov2021-04-071-4/+0
| | | | | | | | | | | | | With the current upstream driver the msm_dsi_phy_type enum does not make much sense: all DSI PHYs are probed using the dt bindings, the phy type is not passed between drivers. Use quirks in phy individual PHY drivers to differentiate minor harware differences and drop the enum. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-8-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: move all PLL callbacks into PHY config structDmitry Baryshkov2021-04-071-0/+15
| | | | | | | | | | | Move all PLL-related callbacks into struct msm_dsi_phy_cfg. This limits the amount of data in the struct msm_dsi_pll. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-7-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: replace PHY's init callback with configurable dataDmitry Baryshkov2021-04-071-2/+2
| | | | | | | | | | | | DSI PHY init callback would either map dsi_phy_regulator or dsi_phy_lane depending on the PHY type. Replace those callbacks with configuration options governing mapping those regions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: add support for 7nm DSI PHY/PLLJonathan Marek2020-09-121-0/+4
| | | | | | | | | | | This adds support for the 7nm ("V4") DSI PHY/PLL for sm8150 and sm8250. Implementation is based on 10nm driver, but updated based on the downstream 7nm driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250) Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: remove unused clk_pre/clk_post in msm_dsi_dphy_timingJonathan Marek2020-09-121-2/+0
| | | | | | | | | The clk_pre/clk_post values in shared_timings are used instead, and these are unused. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250) Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: Add phy configuration for SDM630/636/660Konrad Dybcio2020-07-311-0/+1
| | | | | | | | These SoCs make use of the 14nm phy, but at different addresses than other 14nm units. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
* drm/msm/dsi: Add configuration for 28nm PLL on family BAngeloGioacchino Del Regno2019-11-041-0/+1
| | | | | | | | | The 28nm PLL has a different iospace on MSM/APQ family B SoCs: add a new configuration and use it when the DT reports the "qcom,dsi-phy-28nm-hpm-fam-b" compatible. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
* Merge tag 'drm-msm-next-2019-06-25' of ↵Dave Airlie2019-06-281-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.freedesktop.org/drm/msm into drm-next + usual progress on cleanups + dsi vs EPROBE_DEFER fixes + msm8998 (snapdragon 835 support) + a540 gpu support (mesa support already landed) + dsi, dsi-phy support + mdp5 and dpu interconnect (bus/memory scaling) support + initial prep work for per-context pagetables (at least the parts that don't have external dependencies like iommu/arm-smmu) There is one more patch for fixing DSI cmd mode panels (part of a set of patches to get things working on nexus5), but it would be conflicty with 1cff7440a86e04a613665803b42034 in drm-next without rebasing or back-merge, and since it doesn't conflict with anything in msm-next, I think it best if Sean merges that through drm-mix-fixes instead. (In other news, I've been making some progress w/ getting efifb working properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff not totally falling over when bootloader enables display and things are already running when driver probes.. but not quite ready yet, hopefully we can post some of that for 5.4.. should help for both the sdm835 and sdm850 laptops.) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsj3N4XzDLSDoa+4RHZ9wXObYmhcep0M3LjnRg48BeLvg@mail.gmail.com
| * drm/msm/dsi: Add old timings quirk for 10nm phyJeffrey Hugo2019-06-181-0/+4
| | | | | | | | | | | | | | | | | | | | The v3.0.0 10nm phy has two different implementations between MSM8998 and SDM845, which require different timings calculations. Unfortunately, the hardware designers did not choose to revise the version to account for this delta so implement a quirk instead. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
| * drm/msm/dsi: Add support for MSM8998 10nm dsi phyJeffrey Hugo2019-06-181-0/+1
| | | | | | | | | | | | | | | | The MSM8998 dsi phy is 10nm v3.0.0 like SDM845, however there appear to be minor differences such as the address space location. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2019-06-051-9/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/msm/dsi: implement auto PHY timing calculator for 10nm PHYAbhinav Kumar2018-04-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Currently the DSI PHY timings are hard-coded for a specific panel for the 10nm PHY. Replace this with the auto PHY timing calculator which can calculate the PHY timings for any panel. Changes in v4: - None Changes in v3: - None Changes in v2: - None Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Add skeleton 10nm PHY/PLL codeArchit Taneja2018-02-201-0/+1
| | | | | | | | | | Add new 10nm DSI PLL/PHY files that will be used on SDM845. Just populate empty pll/phy funcs for now. These will be filled up later. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Add PHY/PLL for 8x96Archit Taneja2017-02-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the DSI PHY/PLL drivers to support the DSI 14nm PHY/PLL found on 8x96. These are picked up from the downstream driver. The PHY part is similar to the other DSI PHYs. The PLL driver requires some trickery so that one DSI PLL can drive both the DSIs (i.e, dual DSI mode). In the case of dual DSI mode. One DSI instance becomes the clock master, and other the clock slave. The master PLL's output (Byte and Pixel clock) is fed to both the DSI hosts/PHYs. When the DSIs are configured in dual DSI mode, the PHY driver communicates to the PLL driver using msm_dsi_pll_set_usecase() which instance is the master and which one is the slave. When setting rate, the master PLL also configures some of the slave PLL/PHY registers which need to be identical to the master's for correct dual DSI behaviour. There are 2 PLL post dividers that should have ideally been modelled as generic clk_divider clocks, but require some customization for dual DSI. In particular, when the master PLL's post-diviers are set, the slave PLL's post-dividers need to be set too. The clk_ops for these use clk_divider's helper ops and flags internally to prevent redundant code. Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Add new method to calculate 14nm PHY timingsHai Li2017-02-061-1/+10
| | | | | | | | | | The 14nm DSI PHY on 8x96 (called PHY v2 downstream) requires a different set of calculations for computing D-PHY timing params. Create a timing_calc_v2 func for the newer v2 PHYs. Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Move PHY operations out of hostHai Li2017-02-061-2/+2
| | | | | | | | | | | Since DSI PHY has been a separate platform device, it should not depend on the resources in host to be functional. This change is to trigger PHY operations in manager, instead of host, so that host and PHY can be completely separated. Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Pass down use case to PHYHai Li2017-02-061-0/+1
| | | | | | | | | | For some new types of DSI PHY, more settings depend on use cases controlled by DSI manager. This change allows DSI manager to setup PHY with a use case. Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Return more timings from PHY to hostHai Li2017-02-061-0/+2
| | | | | | | | | | The DSI host is required to configure more timings calculated in PHY. By introducing a shared structure, this change allows more timing information passed from PHY to host. Signed-off-by: Hai Li <hali@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Add a PHY op that initializes version specific stuffArchit Taneja2017-02-061-0/+2
| | | | | | | | | | | | | Create an init() op for dsi_phy which sets up things specific to a given DSI PHY. The dsi_phy driver probe expects every DSI version to get a "dsi_phy_regulator" mmio base. This isn't the case for 8x96. Creating an init() op will allow us to accommodate such differences. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Don't get DSI index from DTArchit Taneja2016-07-161-0/+2
| | | | | | | | | | | | | | | | | | | | The DSI host and PHY driver currently expects the DT bindings to provide custom properties "qcom,dsi-host-index" and "qcom,dsi-phy-index" so that the driver can identify which DSI instance it is. The binding isn't acceptable, but the driver still needs to figure out what its instance id. This is now done by storing the mmio starting addresses for each DSI instance in every SoC version in the driver. The driver then identifies the index number by trying to match the stored address with comparing the resource start address we get from DT. We don't have compatible strings for DSI PHY on each SoC, but only the DSI PHY type. We only support one SoC version for each PHY type, so we get away doing the same thing above for the PHY driver. We can revisit this when we support two SoCs with the same DSI PHY. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
* drm/msm/dsi: Add support for 28nm PHY on 8960Archit Taneja2015-12-141-0/+1
| | | | | | | | | | DSI PHY on MSM8960 and APQ8064 is a 28nm PHY that's different from the supported 28nm LP PHY found in newer chips. Add support for the new PHY. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 08:33:16 +0100