summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/rcar-du (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drm: Place Renesas drivers in a separate dirBiju Das2023-05-2930-10322/+0
| | | | | | | | | | Create vendor specific renesas directory and move renesas drivers to that directory. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: remove R-Car H3 ES1.* workaroundsWolfram Sang2023-05-294-86/+4
| | | | | | | | | | | | R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support for this SoC and prevent booting it. Public users only have ES2 onwards. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Fix a NULL vs IS_ERR() bugDan Carpenter2023-03-251-2/+2
| | | | | | | | | | | The drmm_encoder_alloc() function returns error pointers. It never returns NULL. Fix the check accordingly. Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Write correct values in DORCR reserved fieldsLaurent Pinchart2023-03-251-1/+9
| | | | | | | | | | | | | | | | | | | | | | | The DORCR register controls the routing of clocks and data between DU channels within a group. For groups that contain a single channel, there's no routing option to control, and some fields of the register are then reserved. On Gen2 those reserved fields are documented as required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D reserved fields must be set to 1. The DU driver initializes the DORCR register in rcar_du_group_setup(), where it ignores the PG1T, DK1S and PG1D, and then configures those fields to the correct value in rcar_du_group_set_routing(). This hasn't been shown to cause any issue, but prevents certifying that the driver complies with the documentation in safety-critical use cases. As there is no reasonable change that the documentation will be updated to clarify that those reserved fields can be written to 0 temporarily before starting the hardware, make sure that the registers are always set to valid values. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
* drm: rcar-du: Rename DORCR fields to make them 0-basedLaurent Pinchart2023-03-252-17/+17
| | | | | | | | | | | The DORCR fields were documented in the R-Car H1 datasheet with 1-based named, and then got renamed to 0-based in Gen2. The 0-based names are used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to make them 0-based, in order to increase readability of the code when comparing it with the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
* drm: rcar-du: Disable alpha blending for DU planes used with VSPLaurent Pinchart2023-03-251-1/+1
| | | | | | | | | When the input to a DU channel comes from a VSP, the DU doesn't perform any blending operation. Select XRGB8888 instead of ARGB8888 to ensure that the corresponding registers don't get written with invalid values. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
* drm: rcar-du: Don't write unimplemented ESCR and OTAR registers on Gen3Laurent Pinchart2023-03-251-2/+15
| | | | | | | | | | | The ESCR and OTAR registers are not present in all DU channels on Gen3 SoCs. ESCR only exists in channels that can be routed to an LVDS or DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing those registers for other channels. This replaces the DU gen check, as Gen4 doesn't have LVDS or DPAD outputs. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
* drm: rcar-du: lvds: Fix LVDS PLL disable on D3/E3Laurent Pinchart2023-03-253-59/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to the DU, regardless of whether the LVDS output is used or not. When using the DPAD (RGB) output, the DU driver thus enables and disables the LVDS PLL manually, while when using the LVDS output, it lets the LVDS bridge driver handle the PLL configuration internally as part of the atomic enable and disable operations. This causes an issue when using the LVDS output. As bridges are disabled before CRTCs, the current implementation violates the enable/disable sequences documented in the hardware datasheet, which requires the dot clock to be enabled before the CRTC is started and disabled after it gets stopped. Fix the problem by enabling/disabling the LVDS PLL manually from the DU regardless of which output is used, and skipping the PLL handling in the LVDS bridge atomic enable and disable operations. This is however not enough. Disabling the LVDS encoder while leaving the PLL on still results in a vertical blanking wait timeout when disabling the DU. Investigation showed that the culprit is the LVEN bit. For an unclear reason, clearing the bit when disabling the LVDS encoder blocks vertical blanking interrupts. We thus have to delay disabling the whole LVDS encoder, not just disabling the PLL, until the DU is disabled. We could split the LVDS disable sequence by clearing the LVRES bit in the LVDS bridge atomic disable handler, and delaying the rest of the operations, in order to disable the LVDS output at bridge atomic disable time, before stopping the CRTC. This would make the code more complex, without a clear benefit, so keep the implementation simple(r). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
* drm: rcar-du: lvds: Move LVDS enable code to separate code sectionLaurent Pinchart2023-03-251-47/+50
| | | | | | | | | | | | | | | | | To prepare for a rework of the LVDS disable code, which will need to be called from rcar_lvds_pclk_disable(), move the LVDS enable code, currently stored in the __rcar_lvds_atomic_enable() function, to a separate code section separate from bridge operations. It will be then extended with the LVDS disable code. As part of this rework the __rcar_lvds_atomic_enable() function is renamed to rcar_lvds_enable() to more clearly indicate its purpose. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
* drm: rcar-du: lvds: Call function directly instead of through pointerLaurent Pinchart2023-03-251-2/+1
| | | | | | | | | | When disabling the companion bridge in rcar_lvds_atomic_disable(), there's no need to go through the bridge's operations to call .atomic_disable(). Call rcar_lvds_atomic_disable() on the companion directly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
* Merge tag 'drm-next-20230127' of ↵Dave Airlie2023-01-3011-167/+662
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next Renesas R-Car DU fixes and improvements Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y9QCw3SkHm6k1bwJ@pendragon.ideasonboard.com
| * drm: rcar-du: Stop accessing non-existent registers on gen4Tomi Valkeinen2023-01-232-13/+19
| | | | | | | | | | | | | | | | | | The following registers do not exist on gen4, so we should not write them: DEF6Rm, DEF7Rm, DEF8Rm, ESCRn, OTARn. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: Fix setting a reserved bit in DPLLCRTomi Valkeinen2023-01-234-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On H3 ES1.x two bits in DPLLCR are used to select the DU input dot clock source. These are bits 20 and 21 for DU2, and bits 22 and 23 for DU1. On non-ES1.x, only the higher bits are used (bits 21 and 23), and the lower bits are reserved and should be set to 0. The current code always sets the lower bits, even on non-ES1.x. For both DU1 and DU2, on all SoC versions, when writing zeroes to those bits the input clock is DCLKIN, and thus there's no difference between ES1.x and non-ES1.x. For DU1, writing 0b10 to the bits (or only writing the higher bit) results in using PLL0 as the input clock, so in this case there's also no difference between ES1.x and non-ES1.x. However, for DU2, writing 0b10 to the bits results in using PLL0 as the input clock on ES1.x, whereas on non-ES1.x it results in using PLL1. On ES1.x you need to write 0b11 to select PLL1. The current code always writes 0b11 to PLCS0 field to select PLL1 on all SoC versions, which works but causes an illegal (in the sense of not allowed by the documentation) write to a reserved bit field. To remove the illegal bit write on PLSC0 we need to handle the input dot clock selection differently for ES1.x and non-ES1.x. Add a new quirk, RCAR_DU_QUIRK_H3_ES1_PLL, for this. This way we can always set the bit 21 on PLSC0 when choosing the PLL as the source clock, and additionally set the bit 20 when on ES1.x. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: Add quirk for H3 ES1.x pclk workaroundTomi Valkeinen2023-01-233-7/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rcar_du_crtc.c does a soc_device_match() in rcar_du_crtc_set_display_timing() to find out if the SoC is H3 ES1.x, and if so, apply a workaround. We will need another H3 ES1.x check in the following patch, so rather than adding more soc_device_match() calls, let's add a rcar_du_device_info entry for the ES1, and a quirk flag, RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY, for the workaround. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: lvds: Fix stop sequenceKoji Matsuoka2023-01-231-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | According to hardware manual, LVDCR0 register must be cleared bit by bit when disabling LVDS. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> [tomi.valkeinen: simplified the code a bit] Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: lvds: Add reset controlTomi Valkeinen2023-01-232-1/+20
| | | | | | | | | | | | | | | | | | | | | | Reset LVDS using the reset control as CPG reset/release is required in the hardware manual sequence. Based on a BSP patch from Koji Matsuoka <koji.matsuoka.xm@renesas.com>. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: lvds: Add runtime PMTomi Valkeinen2023-01-232-6/+38
| | | | | | | | | | | | | | | | Add simple runtime PM suspend and resume functionality. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: dsi: Add 'select RESET_CONTROLLER'Tomi Valkeinen2023-01-231-0/+1
| | | | | | | | | | | | | | | | | | The RCAR DSI driver uses reset controller, so we should select it in the Kconfig. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: Depend on DRM_RCAR_DU for components on that SoCPeter Robinson2023-01-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | There's a few components in the rcar-du drm directory that don't make sense to be selectable if DRM_RCAR_DU isn't because they are part of the IP block so add a dependency. The drivers are still testable with COMPILE_TEST on non-Renesas platforms as DRM_RCAR_DU itself is selectable with COMPILE_TEST. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: dsi: Add r8A779g0 supportTomi Valkeinen2023-01-212-128/+375
| | | | | | | | | | | | | | | | | | | | Add DSI support for r8a779g0. The main differences to r8a779a0 are in the PLL and PHTW setups. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: Add r8a779g0 supportTomi Valkeinen2023-01-212-1/+23
| | | | | | | | | | | | | | | | | | Add support for DU on r8a779g0, which is identical to DU on r8a779a0. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: Add new formats (2-10-10-10 ARGB, Y210)Tomi Valkeinen2023-01-212-2/+78
| | | | | | | | | | | | | | | | | | | | Add new pixel formats: RGBX1010102, RGBA1010102, ARGB2101010, Y210 and Y212. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
| * drm: rcar-du: Bump V3U to gen 4Tomi Valkeinen2023-01-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | V3U is actually gen 4 IP, like in V4H. Bump up V3U gen in the rcar_du_r8a779a0_info. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* | Merge tag 'drm-misc-next-2023-01-03' of ↵Daniel Vetter2023-01-041-6/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * connector: Support analog-TV mode property * media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI, MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI Cross-subsystem Changes: * dma-buf: Documentation fixes * i2c: Introduce i2c_client_get_device_id() helper Core Changes: * Improve support for analog TV output * bridge: Remove unused drm_bridge_chain functions * debugfs: Add per-device helpers and convert various DRM drivers * dp-mst: Various fixes * fbdev emulation: Always pick 32 bpp as default * KUnit: Add tests for managed helpers; Various cleanups * panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 * TTM: Open-code ttm_bo_wait() and remove the helper Driver Changes: * Fix preferred depth and bpp values throughout DRM drivers * Remove #CONFIG_PM guards throughout DRM drivers * ast: Various fixes * bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505: Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip, Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640: Use atomic bridge functions * gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously during atomic update * ili9486: Support 16-bit pixel data * imx: Split off IPUv3 driver; Various fixes * mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i Support separate I/O-voltage supply * mxsfb: Depend on ARCH_MXS or ARCH_MXC * omapdrm: Various fixes * panel: Use ktime_get_boottime() to measure power-down delay in various drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a: Add support * sprd: Cleanups * sun4i: Convert to new TV-mode property * tidss: Various fixes * v3d: Various fixes * vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups; dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to bridge * virtio: Improve tracing * vkms: Support small cursors in IGT tests; Various fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
| * drm: rcar-du: Remove #ifdef guards for PM related functionsPaul Cercueil2022-12-121-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle the .suspend/.resume callbacks. These macros allow the suspend and resume functions to be automatically dropped by the compiler when CONFIG_SUSPEND is disabled, without having to use #ifdef guards. This has the advantage of always compiling these functions in, independently of any Kconfig option. Thanks to that, bugs and other regressions are subsequently easier to catch. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-4-paul@crapouillou.net
* | Merge tag 'drm-next-20221122' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie2022-11-241-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | Kconfig fix for RZ/G2L DSI Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3wYk/Bn/qVa9ha0@pendragon.ideasonboard.com
| * drm: rcar-du: Fix Kconfig dependency between DRM and RZG2L_MIPI_DSIBiju Das2022-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_DRM=m and CONFIG_DRM_RZG2L_MIPI_DSI=y, it results in a build failure. This patch fixes the build issue by adding dependency to DRM. Fixes: 7a043f978ed1 ("drm: rcar-du: Add RZ/G2L DSI driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* | Backmerge tag 'v6.1-rc6' into drm-nextDave Airlie2022-11-241-4/+9
|\ \ | |/ |/| | | | | | | | | | | Linux 6.1-rc6 This is needed for drm-misc-next and tegra. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSILaurent Pinchart2022-11-091-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When the R-Car MIPI DSI driver was added, it was a standalone encoder driver without any dependency to or from the R-Car DU driver. Commit 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") then added a direct call from the DU driver to the MIPI DSI driver, without updating Kconfig to take the new dependency into account. Fix it the same way that the LVDS encoder is handled. Fixes: 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* | Merge tag 'drm-misc-next-2022-11-10-1' of ↵Dave Airlie2022-11-151-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: Core Changes: - atomic-helper: Add begin_fb_access and end_fb_access hooks - fb-helper: Rework to move fb emulation into helpers - scheduler: rework entity flush, kill and fini - ttm: Optimize pool allocations Driver Changes: - amdgpu: scheduler rework - hdlcd: Switch to DRM-managed resources - ingenic: Fix registration error path - lcdif: FIFO threshold tuning - meson: Fix return type of cvbs' mode_valid - ofdrm: multiple fixes (kconfig, types, endianness) - sun4i: A100 and D1 support - panel: - New Panel: Jadard JD9365DA-H3 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221110083612.g63eaocoaa554soh@houat
| * | drm/fb-helper: Move generic fbdev emulation into separate source fileThomas Zimmermann2022-11-051-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the generic fbdev implementation into its own source and header file. Adapt drivers. No functional changes, but some of the internal helpers have been renamed to fit into the drm_fbdev_ naming scheme. v3: * rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h} * rebase onto vmwgfx changes * rebase onto xlnx changes * fix include statements in amdgpu Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
* | drm: rcar-du: rzg2l_mipi_dsi: Enhance device lanes checkBiju Das2022-11-091-34/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | Enhance device lanes check by reading TXSETR register at probe(), and enforced in rzg2l_mipi_dsi_host_attach(). As per HW manual, we can read TXSETR register only after DPHY initialization. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* | drm: rcar-du: Add RZ/G2L DSI driverBiju Das2022-11-094-0/+923
| | | | | | | | | | | | | | | | | | | | This driver supports the MIPI DSI encoder found in the RZ/G2L SoC. It currently supports DSI video mode only. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* | drm: rcar-du: Drop leftovers dependencies from KconfigLaurent Pinchart2022-11-091-2/+0
|/ | | | | | | | | | | | Commit 841281fe52a7 ("drm: rcar-du: Drop LVDS device tree backward compatibility") has removed device tree overlay sources used for backward compatibility with old bindings, but forgot to remove related dependencies from Kconfig. Fix it. Fixes: 841281fe52a7 ("drm: rcar-du: Drop LVDS device tree backward compatibility") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: dsi: Fix VCLKSET writeTomi Valkeinen2022-09-071-2/+2
| | | | | | | | | | | | | rcar_mipi_dsi_startup() writes correct values to VCLKSET, but as it uses or-operation to add the new values to the current value in the register, it should first make sure the fields are cleared. Do this by using rcar_mipi_dsi_write() to write the VCLKSET register with a variable that has all the unused bits zeroed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Fix DSI enable & disable sequenceTomi Valkeinen2022-09-075-6/+83
| | | | | | | | | | | | | | | | | | | | | | The rcar crtc depends on the clock provided from the rcar DSI bridge. When the DSI bridge is disabled, the clock is stopped, which causes the crtc disable to timeout. Also, while I have no issue with the enable, the documentation suggests to enable the DSI before the crtc so that the crtc has its clock enabled at enable time. This is also not done by the current driver. To fix this, we need to keep the DSI bridge enabled until the crtc has disabled itself, and enable the DSI bridge before crtc enables itself. Add functions rcar_mipi_dsi_pclk_enable and rcar_mipi_dsi_pclk_disable to the rcar DSI bridge driver which the rcar driver can use to enable/disable the DSI clock when needed. This is similar to what is already done with the rcar LVDS bridge. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: dsi: Improve DSI shutdownTomi Valkeinen2022-09-071-0/+12
| | | | | | | | | | | Improve the DSI shutdown procedure by clearing various bits that were set while enabling the DSI output. There has been no clear issues caused by these, but it's safer to ensure that the features are disabled at the start of the next DSI enable. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: dsi: Properly stop video mode TXTomi Valkeinen2022-09-071-0/+29
| | | | | | | | | | | | | The driver does not explicitly stop the video mode transmission when disabling the output. While this doesn't seem to be causing any issues, lets follow the steps described in the documentation and add a rcar_mipi_dsi_stop_video() which stop the video mode transmission. This function will also be used in later patches to stop the video transmission even if the DSI IP is not shut down. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: lvds: Rename pclk enable/disable functionsTomi Valkeinen2022-09-073-11/+11
| | | | | | | | | | | | The DU driver uses the rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions enable or disable the pixel clock generated by the LVDS encoder, as it requires that clock for proper DU operation. Rename the functions by replacing "clk" with "pclk" to make it clearer that they related to the pixel clock. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Use %p4cc to print 4CC formatBiju Das2022-09-073-6/+6
| | | | | | | | | | Use the %p4cc format specifier to print 4CCs, which will provide a more readable message than the raw hex value. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Drop unused encoder header filesBiju Das2022-09-071-5/+0
| | | | | | | | Drop unused header files from rcar_du_encoder.c Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Drop leftovers variables from MakefileLaurent Pinchart2022-09-071-7/+0
| | | | | | | | | | | | Commit 841281fe52a7 ("drm: rcar-du: Drop LVDS device tree backward compatibility") has removed device tree overlay sources used for backward compatibility with old bindings, but forgot to remove related variables from the Makefile. Fix it. Fixes: 841281fe52a7 ("drm: rcar-du: Drop LVDS device tree backward compatibility") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
* drm: rcar-du: Fix r8a779a0 color issueTomi Valkeinen2022-09-073-4/+12
| | | | | | | | | | | | | | | | | The rcar DU driver on r8a779a0 has a bug causing some specific colors getting converted to transparent colors, which then (usually) show as black pixels on the screen. The reason seems to be that the driver sets PnMR_SPIM_ALP bit in PnMR.SPIM field, which is an illegal setting on r8a779a0. The PnMR_SPIM_EOR bit also illegal. Add a new feature flag for this (lack of a) feature and make sure the bits are zero on r8a779a0. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Remove unnecessary includeTomi Valkeinen2022-09-071-1/+0
| | | | | | | | rcar_du_regs.h is not needed by rcar_du_drv.c so drop the include. Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Add DRM_MODE_BLEND_PIXEL_NONE supportTakanari Hayama2022-09-071-1/+19
| | | | | | | | | | | | | | DRM_MODE_BLEND_PIXEL_NONE ignores an alpha channel. Rcar-du driver supports only 3 formats with an alpha channel (DRM_FORMAT_ARGB1555, DRM_FORMAT_ARGB8888 and DRM_FORMAT_ARGB4444). We simply override the format passed to VSP1 for blending with the pixel format without alpha channel. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Takanari Hayama <taki@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm: rcar-du: Add DRM_MODE_BLEND_PREMULTI supportTakanari Hayama2022-09-071-0/+6
| | | | | | | | | | | | | | | | R-Car DU driver implicitly supports DRM_MODE_BLEND_COVERAGE only. This adds a support for DRM_MODE_BLEND_PREMULTI. As a consequence, DRM_MODE_BLEND_PREMULTI becomes the default. If DRM_MODE_BLEND_COVERAGE is desired, it should be set explicitly. This behavior comes from how DRM blend mode is supported. drm_plane_create_blend_mode_property() creates the blend mode property with the default value of DRM_MODE_BLEND_PREMULTI. This default value cannot be modified from the atomic driver. Signed-off-by: Takanari Hayama <taki@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
* drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}Danilo Krummrich2022-08-033-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The field paddr of struct drm_gem_dma_object holds a DMA address, which might actually be a physical address. However, depending on the platform, it can also be a bus address or a virtual address managed by an IOMMU. Hence, rename the field to dma_addr, which is more applicable. In order to do this renaming the following coccinelle script was used: ``` @@ struct drm_gem_dma_object *gem; @@ - gem->paddr + gem->dma_addr @@ struct drm_gem_dma_object gem; @@ - gem.paddr + gem.dma_addr @exists@ typedef dma_addr_t; symbol paddr; @@ dma_addr_t paddr; <... - paddr + dma_addr ...> @@ symbol paddr; @@ dma_addr_t - paddr + dma_addr ; ``` This patch is compile-time tested with: ``` make ARCH={x86_64,arm,arm64} allyesconfig make ARCH={x86_64,arm,arm64} drivers/gpu/drm` ``` Acked-by: Sam Ravnborg <sam@ravnborg.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
* drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich2022-08-036-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
* drm/fb: rename FB CMA helpers to FB DMA helpersDanilo Krummrich2022-08-032-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
* drm/fb: remove unused includes of drm_fb_cma_helper.hDanilo Krummrich2022-08-033-3/+0
| | | | | | | | | | | | | Quite a lot of drivers include the drm_fb_cma_helper.h header file without actually making use of it's provided API, hence remove those includes. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-2-dakr@redhat.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 17:30:03 +0100