summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/lm75.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: move from strlcpy with unused retval to strscpyWolfram Sang2022-09-191-1/+1
| | | | | | | | | | | Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210014.6769-1-wsa+renesas@sang-engineering.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add Atmel AT30TS74 supportPeter Rosin2022-05-201-0/+14
| | | | | | | | Atmel (now Microchip) AT30TS74 is an LM75 compatible sensor. Add it. Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/9494dfbc-f506-3e94-501d-6760c487c93d@axentia.se Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add TI TMP1075 supportRobert Marko2021-06-171-0/+13
| | | | | | | | | TI TMP1075 is a LM75 compatible sensor, so lets add support for it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20210429121150.106804-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add regulator supportAlban Bedel2020-10-041-0/+24
| | | | | | | | | Add regulator support for boards where the sensor first need to be powered up before it can be used. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Link: https://lore.kernel.org/r/20201001145738.17326-4-alban.bedel@aerq.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: use simple i2c probe functionStephen Kitt2020-09-231-4/+5
| | | | | | | | | | | | | | | | | | | | | | | Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. A few drivers aren't included in this patch because they have a different set of maintainers. They will be covered by other patches. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Fix all coding-style warnings on lm75 driverMichal Orzel2020-05-221-2/+6
| | | | | | | Check/fix all warnings generated by checkpatch.pl script on LM75 driver. Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Aproximate sample times to data-sheet valuesIker Perez del Palomar Sustatxa2019-09-041-22/+22
| | | | | | | | | Current sample time values are over estimated, this patches applies values closer to the ones defined in the data-sheets. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> [groeck: resolved conflicts; use default conversion times] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add support for writing sampling period on PCT2075Guenter Roeck2019-09-031-1/+14
| | | | | | | For PCT7027, the sampling period is configured using a dedicated register. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add support for writing conversion time for TMP112Guenter Roeck2019-09-031-9/+26
| | | | | | | | TMP112 uses an uncommon method to write the conversion time: its configuration register is 16 bit wide, and the conversion time is configured in its second byte. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Move updating the sample interval to its own functionGuenter Roeck2019-09-031-14/+19
| | | | | | | | We'll need per-chip handling for updating the sample interval. To prepare for it, separate the code implementing it into its own function. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Support configuring the sample time for various chipsGuenter Roeck2019-09-031-27/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conversion (sample) time is configurable for several chips supported by the lm75 driver. With the necessary infrastructure in place, enable this support for all chips using the configuration register for this purpose. DS1775: Conversion time: 187.5, 375, 750, 1500 ms Sensor resolution: 9, 10, 11, 12 bit DS75, STDS75: Conversion time: 150, 300, 600, 1200 ms Sensor resolution: 9, 10, 11, 12 bit DS7505: Conversion time: 25, 50, 100, 200 ms Sensor resolution: 9, 10, 11, 12 bit MCP980[0123]: Conversion time: 75, 150, 300, 600 ms Sensor resolution: 9, 10, 11, 12 bit TMP100, TMP101: Conversion time: 75, 150, 300, 600 ms Sensor resolution: 9, 10, 11, 12 bit TMP75, TMP105, TMP175, TMP275: Conversion time: 38, 75, 150, 300 ms Sensor resolution: 9, 10, 11, 12 bit While doing this, it became obvious that the masks and values to set the converion (sample) time is similar for all those chips, and that other chips with configurable sample times will need separate code anyway. For that reason, replace the sample_set_masks and sample_clr_mask configuration parameters with a single array and with a constant. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Modularize lm75_write and make hwmon_chip writableIker Perez del Palomar Sustatxa2019-09-031-5/+47
| | | | | | | | | | * Create two separate functions to write into hwmon_temp and hwmon_chip. * Call the functions from lm75_write. * Make hwm_chip writable if the chip supports more than one sample time. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190808080246.8371-5-iker.perez@codethink.co.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add new fields into lm75_params_Iker Perez del Palomar Sustatxa2019-09-031-6/+32
| | | | | | | | | | | | | | | | The new fields are included to prepare the driver for next patch. The fields are: * *resolutions: Stores all the supported resolutions by the device. * num_sample_times: Stores the number of possible sample times. * *sample_times: Stores all the possible sample times to be set. * sample_set_masks: The set_masks for the possible sample times * sample_clr_mask: Clear mask to set the default sample time. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190808080246.8371-4-iker.perez@codethink.co.uk [groeck: Minor structure documentation fixes] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Create function from code to write into registersIker Perez del Palomar Sustatxa2019-09-031-7/+27
| | | | | | | | | | | Wrap the existing code to write configurations into registers in a function. Added error handling to the function. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190808080246.8371-3-iker.perez@codethink.co.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Create structure to save all the configuration parameters.Iker Perez del Palomar Sustatxa2019-09-031-106/+176
| | | | | | | | | | | | | | | | | * Add to lm75_data kind field to store the kind of device the driver is working with. * Add an structure to store the configuration parameters of all the supported devices. * Delete resolution_limits from lm75_data and include them in the structure described above. * Add a pointer to the configuration parameters structure to be used as a reference to obtain the parameters. * Delete switch-case approach to get the device configuration parameters. * The structure is cleaner and easier to maintain. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190808080246.8371-2-iker.perez@codethink.co.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) add support for PCT2075Daniel Mack2019-09-031-0/+10
| | | | | | | | | | | | | The NXP PCT2075 is largely compatible with other chips already supported by the LM75 driver. It uses an 11-bit resolution and defaults to 100 ms sampling period. The datasheet is here: https://www.nxp.com/docs/en/data-sheet/PCT2075.pdf Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20190711124504.7580-2-daniel@zonque.org [groeck: Documentation update] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Fix write operations for negative temperaturesGuenter Roeck2019-08-311-1/+1
| | | | | | | | | | | | | Writes into limit registers fail if the temperature written is negative. The regmap write operation checks the value range, regmap_write accepts an unsigned int as parameter, and the temperature value passed to regmap_write is kept in a variable declared as long. Negative values are converted large unsigned integers, which fails the range check. Fix by type casting the temperature to u16 when calling regmap_write(). Cc: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Fixes: e65365fed87f ("hwmon: (lm75) Convert to use regmap") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Fixup tmp75b clr_maskIker Perez del Palomar Sustatxa2019-08-071-1/+1
| | | | | | | | | | | | | | The configuration register of the tmp75b sensor is 16bit long, however the first byte is reserved, so there is not no need to take care of it. Because the order of the bytes is little endian and it is only necessary to write one byte, the desired bits must be shifted into a 8 bit range. Fixes: 39abe9d88b30 ("hwmon: (lm75) Add support for TMP75B") Cc: stable@vger.kernel.org Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Link: https://lore.kernel.org/r/20190801075324.4638-1-iker.perez@codethink.co.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner2019-05-241-14/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: (lm75) Add support for TMP75BIker Perez del Palomar Sustatxa2019-05-031-0/+11
| | | | | | | | The TMP75B has a different control register, supports 12-bit resolution and the default conversion rate is 37 Hz. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Fix build warningGuenter Roeck2019-04-161-1/+1
| | | | | | | | | | | If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/lm75.c:446:34: warning: ‘lm75_of_match’ defined but not used Mark lm75_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Use HWMON_CHANNEL_INFO macroGuenter Roeck2019-04-161-28/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. The conversion was done automatically with coccinelle. The semantic patch used to make this change is as follows. @r@ initializer list elements; identifier i; @@ -u32 i[] = { - elements, - 0 -}; @s@ identifier r.i,j,ty; @@ -struct hwmon_channel_info j = { - .type = ty, - .config = i, -}; @script:ocaml t@ ty << s.ty; elements << r.elements; shorter; elems; @@ shorter := make_ident (List.hd(List.rev (Str.split (Str.regexp "_") ty))); elems := make_ident (String.concat "," (List.map (fun x -> Printf.sprintf "\n\t\t\t %s" x) (Str.split (Str.regexp " , ") elements))) @@ identifier s.j,t.shorter; identifier t.elems; @@ - &j + HWMON_CHANNEL_INFO(shorter,elems) This patch does not introduce functional changes. Many thanks to Julia Lawall for providing the semantic patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Replace S_<PERMS> with octal valuesGuenter Roeck2019-02-181-3/+3
| | | | | | | | | | | | | Replace S_<PERMS> with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add STLM75 supportJagan Teki2018-12-171-0/+10
| | | | | | | | | | | | | The STLM75 is a high-precision digital CMOS temperature sensor IC with a sigma-delta temperature-to-digital converter. The configuration register mapping is similar to existing lm75 but the sample rate is 150ms(max). Tested on real hardware and verified temperature readings are correct. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'regmap-v5.0' of ↵Linus Torvalds2018-10-231-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A small update with a couple of new APIs that are useful for some small sets of devices: - Split up the single_rw flagging to map read and write separately as some devices support bulk operations for only read or only write. - Add a write version of the noinc API. - Clean up the code for LOG_DEVICE a bit" * tag 'regmap-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: use less #ifdef for LOG_DEVICE regmap: Add regmap_noinc_write API regmap: split up regmap_config.use_single_rw regmap: fix comment for regmap.use_single_write
| * regmap: split up regmap_config.use_single_rwDavid Frey2018-09-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | hwmon: (lm75) Add MAX31725/6 supportKun Yi2018-10-111-2/+16
|/ | | | | | | | | | | | | MAX31725/MAX31726 are local temperature sensors with +/- 0.5 degree Celsius accuracy and 16-bit (0.00390625 degrees Celsius) resolution. They have a register mapping and encoding compatible with the lm75 series drivers. Address scan and extended temperature range are not supported by this patch. Tested on real hardware and verified temperature readings are correct. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Fix trailing semicolonLuis de Bethencourt2018-01-171-1/+1
| | | | | | | | The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add OF device ID tableJavier Martinez Canillas2017-04-021-1/+97
| | | | | | | | | | | | | The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Convert to use new hwmon registration APIGuenter Roeck2016-09-091-69/+116
| | | | | | | Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Improve error handlingGuenter Roeck2016-08-011-2/+4
| | | | | | | Use devm_add_action_or_reset() instead of devm_add_action(), and check its return value. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Convert to use regmapGuenter Roeck2016-07-091-94/+68
| | | | | | | | | Convert to use regmap. Leave caching to regmap and drop the register update function. While this can result in additional read operations if the temperature register is read continuously, it avoids re-reading the limit registers and thus overall reduces complexity. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add update_interval attributeGuenter Roeck2016-07-091-0/+13
| | | | | | | Since we know the chip's update interval, let's make it available to the user. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Drop lm75_read_value and lm75_write_valueGuenter Roeck2016-07-091-33/+9
| | | | | | | lm75_read_value and lm75_write_value don't really add any value. Replace with direct smbus access functions. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Handle cleanup with devm_add_actionGuenter Roeck2016-07-091-19/+19
| | | | | | | | | Use devm_add_action() to register the function to restore the original chip configuration. Use devm_hwmon_device_register_with_groups() to register the hwmon device, and drop the remove function as no longer needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: convert lm75 to use devm_thermal_zone_of_sensor_registerEduardo Valentin2016-05-171-7/+3
| | | | | | | | | | | | | This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
* hwmon: (lm75) Add support for TMP75CBen Gardner2015-10-141-0/+7
| | | | | | | | | The TMP75C has a different control register layout and only supports 12-bit temperature samples (0.0625 deg C). The continuous sample rate is ~12 Hz. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* thermal: consistently use int for temperaturesSascha Hauer2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
* Merge branch 'next' of ↵Linus Torvalds2014-12-171-3/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "Summary: - of-thermal extension to allow drivers to register and use its functionality in a better way, without exploiting thermal core. From Lukasz Majewski. - Fix a bug in intel_soc_dts_thermal driver which calls a sleep function in interrupt handler. From Maurice Petallo. - add a thermal UAPI header file for exporting the thermal generic netlink information to user-space. From Florian Fainelli. - First round of refactoring in Exynos driver. Bartlomiej and Lukasz are attempting to make it lean and easier to understand. - New thermal driver for Rockchip (rk3288), with support for DT thermal. From Caesar Wang. - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with support for DT thermal. From Mikko Perttunen. - New cooling device, based on common clock framework. From Eduardo Valentin. - a couple of small fixes in thermal core framework. From Srinivas Pandruvada, Javi Merino, Luis Henriques. - Dropping Armada A375-Z1 SoC thermal support as the chip is not in the market, armada folks decided to drop its support. - a couple of small fixes and cleanups in int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits) thermal: provide an UAPI header file Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call thermal/powerclamp: add id for braswell cpu thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock Thermal: fix platform_no_drv_owner.cocci warnings Thermal/int340x: avoid unnecessary pointer casting thermal: int3403: Delete a check before thermal_zone_device_unregister() thermal/int3400: export uuids thermal: of: Extend current of-thermal.c code to allow setting emulated temp thermal: of: Extend of-thermal to export table of trip points thermal: of: Rename struct __thermal_trip to struct thermal_trip thermal: of: Extend of-thermal.c to provide check if trip point is valid thermal: of: Extend of-thermal.c to provide number of trip points thermal: Fix error path in thermal_init() thermal: lock the thermal zone when switching governors thermal: core: ignore invalid trip temperature thermal: armada: Remove support for A375-Z1 SoC thermal: rockchip: add driver for thermal dt-bindings: document Rockchip thermal thermal: exynos: remove exynos_tmu_data.h include ...
| * thermal: of: improve of-thermal sensor registration APIEduardo Valentin2014-11-201-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different drivers request API extensions in of-thermal. For this reason, additional callbacks are required to fit the new drivers needs. The current API implementation expects the registering sensor driver to provide a get_temp and get_trend callbacks as function parameters. As the amount of callbacks is growing, this patch changes the existing implementation to use a .ops field to hold all the of thermal callbacks to sensor drivers. This patch also changes the existing of-thermal users to fit the new API design. No functional change is introduced in this patch. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.de> Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: lm-sensors@lm-sensors.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Reviewed-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
* | hwmon: (lm75) Strengthen detect functionGuenter Roeck2014-12-051-0/+6
| | | | | | | | | | | | | | | | | | | | A chip returning 0x00 in all registers is erroneously detected as LM75. Check hysteresis and temperature limit registers and abort if both are 0 to reduce the likelyhood for this to happen. Reviewed-by: Rob Coulson <rob.coulson@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (lm75) Add support for the NXP LM75BMichael Thalmeier2014-12-011-0/+6
|/ | | | | | | It is basically a faster lm75 with improved (11 bit) resolution. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add support for TMP112Frans Klaver2014-08-041-0/+8
| | | | | | | TMP112 is compatible to LM75. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Convert to use hwmon_device_register_with_groupsGuenter Roeck2014-05-221-31/+20
| | | | | | Simplify code and attach hwmon attributes to hwmon device. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: lm75: expose to thermal fw via DT nodesEduardo Valentin2013-12-041-5/+30
| | | | | | | | | | | | | | | | | | | | | | | This patch adds to lm75 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm75 DT node. Otherwise, the driver behavior will be the same. Note: This patch has also been reviewed by Jean D. He has requested to perform a wider inspection of possible users of thermal and hwmon interaction API. On the other hand, the change on this patch is acceptable on first step of overall code change. Cc: Jean Delvare <khali@linux-fr.org> Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
* hwmon: (lm75) Add support for GMT G751 chipArnaud Ebalard2013-11-181-0/+3
| | | | | | | | This was tested on a NETGEAR ReadyNAS 2120 device (Marvell Armada XP based board, via DT). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add support for the Dallas/Maxim DS7505Jean Delvare2013-05-041-0/+7
| | | | | | | Basically it's the same as the original DS75 but much faster. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Tune resolution and sample time per chipJean Delvare2013-05-041-6/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | Most LM75-compatible chips can either sample much faster or with a much better resolution than the original LM75 chip. So far the lm75 driver did not let the user take benefit of these improvements. Do it now. I decided to almost always configure the chip to use the best resolution possible, which also means the longest sample time. The only chips for which I didn't are the DS75, DS1775 and STDS75, because they are really too slow in 12-bit mode (1.2 to 1.5 second worst case) so I went for 11-bit mode as a more reasonable tradeoff. This choice is dictated by the fact that the hwmon subsystem is meant for system monitoring, it has never been supposed to be ultra-fast, and as a matter of fact we do cache the sampled values in almost all drivers. If anyone isn't pleased with these default settings, they can always introduce a platform data structure or DT support for the lm75. That being said, it seems nobody ever complained that the driver wouldn't refresh the value faster than every 1.5 second, and the change made it faster for all chips even in 12-bit mode, so I don't expect any complaint. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Prepare to support per-chip resolution and sample timeJean Delvare2013-05-041-5/+26
| | | | | | | | | | Prepare the lm75 driver to support per-chip resolution and sample time. For now we only make the code generic enough to support it, but we still use the same, unchanged resolution (9-bit) and sample time (1.5 s) for all chips. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Per-chip configuration register initializationJean Delvare2013-05-041-2/+22
| | | | | | | | | | | | | | There is no standard for the configuration register bits of LM75-like chips. We shouldn't blindly clear bits setting the resolution as they are either unused or used for something else on some of the supported chips. So, switch to per-chip configuration initialization. This will allow for better tuning later, for example using more resolution bits when available. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>