summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/lm90.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (lm90) Add range check to set_update_intervalGuenter Roeck2012-01-161-1/+1
| | | | | | | | | | | When writing the update_interval attribute, the parameter value was not range checked, which could cause an integer overflow and result in an arbitrary update interval. Fix by limiting the value range to <0, 100000>. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: replaced strict_str* with kstr*Frans Meulenbroeks2012-01-051-5/+5
| | | | | | | | | | | replaced strict_strtol with kstrtol and replaced strict_strtuol with kstrtuol This satisfies checkpatch -f Compile tested only: no warnings or errors given Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Make code more readableJean Delvare2011-11-041-74/+69
| | | | | | | | | | | | Clean up the code to make it more readable: * Remove reg_ and new_ prefixes from variable names, they made the names longer, causing extra line breaks, while not adding much value. * Introduce struct device dev* = &client->dev in two functions, to avoid repeating client->dev everywhere in these functions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Fix warningsJean Delvare2011-11-041-15/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | With some configuration option combinations, we get the following warnings: drivers/hwmon/lm90.c: In function 'lm90_detect': drivers/hwmon/lm90.c:1114: warning: 'chip_id' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_config1' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_convrate' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_emerg2' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_status2' may be used uninitialized in this function We can solve these easily by reading the register values first and checking for errors later. These errors should be very rare, even in the case of failed detection, so this change has no impact on performance. And this makes checkpatch.pl happier. Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Refactor reading of config2 registerJean Delvare2011-07-291-19/+6
| | | | | | | | | | Several vendors implement a second configuration register, which we check during device detection. Refactor the code to avoid duplication. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Stijn Devriendt <sdevrien@cisco.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Make SA56004 detection more robustJean Delvare2011-07-291-2/+13
| | | | | | | | | | | | With a device ID register value of 0, the SA56004 detection is rather weak. Check several other register too to confirm the detection, as we do for other supported devices. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Stijn Devriendt <sdevrien@cisco.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Stijn Devriendt <sdevrien@cisco.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Simplify handling of extended local temp registerJean Delvare2011-07-291-15/+6
| | | | | | | | | | | | | The optional extended local temperature register can never have address 0, as this address is already used by another register. Thus we can get rid of flag LM90_HAVE_LOCAL_EXT and simply rely on reg_local_ext being non-zero to determine if a given chip has this extension or not. This makes the code more simple. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Stijn Devriendt <sdevrien@cisco.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Add support for Philips SA56004Stijn Devriendt2011-07-281-3/+37
| | | | | | | Add support for Philips SA56004, an LM86 compatible temperature sensor. Signed-off-by: Stijn Devriendt <sdevrien@cisco.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Add support for ADT7461A and NCT1008Guenter Roeck2011-04-291-7/+15
| | | | | | | | | This patch adds support for ADT7461A and NCT1008 to the lm90 driver. Both chips have identical functionality and report the same manufacturing ID and device ID values. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* hwmon: (lm90) Add support for the W83L771W/GJean Delvare2010-10-281-6/+19
| | | | | | | | | I was wondering if that chip ever existed publicly... Apparently yes, so add support for it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (lm90) Add support for update_interval sysfs attributeGuenter Roeck2010-10-281-5/+92
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Introduce capability flag to indicate broken ALERT functionalityGuenter Roeck2010-10-281-3/+6
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Introduce chip parameter structureGuenter Roeck2010-10-281-32/+60
| | | | | | | | Instead of using switch/case and if statements in probe, define chip specific functionality in a parameter structure array. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Rearrange code to no longer require forward declarationsGuenter Roeck2010-10-281-267/+256
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Add support for max6695 and max6696Guenter Roeck2010-10-281-22/+228
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Add support for extra features of max6659Guenter Roeck2010-10-281-6/+59
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Add explicit support for max6659Guenter Roeck2010-10-281-11/+21
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Simplify set_temp11 register calculationsGuenter Roeck2010-10-281-27/+28
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Introduce function to delete sysfs filesGuenter Roeck2010-10-281-7/+11
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Introduce device feature bitsGuenter Roeck2010-10-281-14/+26
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Fix checkpatch errorsGuenter Roeck2010-10-281-25/+51
| | | | | Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Use programmed update rateIra W. Snyder2010-05-271-1/+2
| | | | | | | | | | The lm90 driver programs the sensor chip to update its readings at 2 Hz (500 ms between readings). However, the driver only does reads from the chip at intervals of 2 * HZ (2000 ms between readings). Change the driver update rate to the programmed update rate. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Add SMBus alert supportJean Delvare2010-03-051-0/+63
| | | | | | | | | | | | | | Tested successfully with an ADM1032 chip on its evaluation board. It should work fine with all other chips as well. At this point this is more of a proof-of-concept, we don't do anything terribly useful on SMBus alert: we simply log the event. But this could later evolve into libsensors signaling so that user-space applications can take an appropriate action. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
* hwmon: (lm90) Restore configuration on exitJean Delvare2010-03-051-4/+10
| | | | | | | Restore the chip configuration when unloading the driver. This ensures we don't leave the chip running if it was initially stopped. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASGJean Delvare2010-03-051-1/+11
| | | | | | | | This chips is found on several Zotac Ion ITX boards, amongst others. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: MC Matti <mcmatti17@googlemail.com> Cc: Manuel Lamotte-Schubert <mls@pronego.com>
* i2c: Drop I2C_CLIENT_INSMOD_2 to 8Jean Delvare2009-12-141-6/+1
| | | | | | | | | These macros simply declare an enum, so drivers might as well declare it themselves. This puts an end to the arbitrary limit of 8 chip types per i2c driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Get rid of struct i2c_client_address_dataJean Delvare2009-12-141-1/+1
| | | | | | | | | Struct i2c_client_address_data only contains one field at this point, which makes its usefulness questionable. Get rid of it and pass simple address lists around instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* i2c: Drop the kind parameter from detect callbacksJean Delvare2009-12-141-3/+2
| | | | | | | | The "kind" parameter always has value -1, and nobody is using it any longer, so we can remove it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
* hwmon: (lm90) Clean up detect functionJean Delvare2009-12-091-132/+96
| | | | | | As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Document support for the MAX6648/6692 chipsDarrick J. Wong2009-03-121-4/+4
| | | | | | | Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Add support for the LM99 16 degree offsetJean Delvare2008-10-261-4/+33
| | | | | | | | | | The LM99 differs from the LM86, LM89 and LM90 in that it reports remote temperatures (temp2) 16 degrees lower than they really are. So far we have been cheating and handled this in userspace but it really should be handled by the driver directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org>
* hwmon: (lm90) Fix handling of hysteresis valueJean Delvare2008-10-261-3/+12
| | | | | | | | | | | | | | | | | | | | | | | There are several problems in the way the hysteresis value is handled by the lm90 driver: * In show_temphyst(), specific handling of the MAX6646 is missing, so the hysteresis is reported incorrectly if the critical temperature is over 127 degrees C. * In set_temphyst(), the new hysteresis register value is written to the chip but data->temp_hyst isn't updated accordingly, so there is a short period of time (up to 2 seconds) where the old hystereris value will be returned while the new one is already active. * In set_temphyst(), the critical temperature which is used as a base to compute the value of the hysteresis register lacks device-specific handling. As a result, the value of the hysteresis register might be incorrect for the ADT7461 and MAX6646 chips. Fix these 3 bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Nate Case <ncase@xes-inc.com>
* hwmon: (lm90) Don't spam the kernel logJean Delvare2008-10-171-3/+3
| | | | | | | | | Degrade the "Unsupported chip" message from info to debug level. There's nothing wrong with this, so no need to bother the user. Also make the message slightly more descriptive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Support MAX6646, MAX6647 and MAX6649Ben Hutchings2008-10-171-12/+65
| | | | | | | | These Maxim chips are similar to MAX6657 but use unsigned temperature values to allow for readings up to 145 degrees. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (lm90) Rename temperature conversion functions to match usageBen Hutchings2008-10-171-23/+23
| | | | | | | | | | The encoding of temperatures varies between chips and modes. So do not use "temp1" or "temp2" in the names of the conversion functions, but specify the encoding. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Support ADT7461 in extended modeNate Case2008-10-171-27/+93
| | | | | | | | | | Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Convert some macros to static functionsNate Case2008-10-171-45/+83
| | | | | | | | | | | Use static functions instead of the TEMPx_FROM_REG* and TEMPx_TO_REG* macros. This will ensure type safety and eliminate any side effects from arguments passed in since the macros referenced 'val' multiple times. This change should not affect functionality. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Update datasheet linksJean Delvare2008-10-171-23/+7
| | | | | | | | | Update the links to the datasheet of some of the devices supported by the lm90 driver. Also remove the links from the driver itself, so that we don't have to update them twice each time they change. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Don't access nonexistent registers on Maxim chipsJean Delvare2008-10-171-8/+21
| | | | | | | | | | The Maxim chips supported by the lm90 driver have 8-bit high and low remote limit values, not 11-bit as the other chips have. So stop reading from and writing to registers that do not exist on these chips. Also round the limit values set by the user properly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Support the extra resolution bits of MAX6657Jean Delvare2008-10-171-21/+33
| | | | | | | | | The Maxim MAX6657, MAX6658 and MAX6659 have extra resolution bits for the local temperature measurement. Let the lm90 driver read them and export them to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Move 16-bit value read to a separate functionJean Delvare2008-10-171-29/+43
| | | | | | | | | Move the code which aggregates two 8-bit register values into a 16-bit value to a separate function. We'll need to do it a second time soon and I don't want to duplicate the code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
* hwmon: (lm90) Convert to a new-style i2c driverJean Delvare2008-07-161-56/+63
| | | | | | | The new-style lm90 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: normal_i2c arrays should be constMark M. Hoffman2008-02-191-4/+2
| | | | Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Discard useless I2C driver IDsJean Delvare2008-02-081-1/+0
| | | | | | | | | Many I2C hwmon drivers define a driver ID but no other code references these, meaning that they are useless. Discard them, along with a few IDs which are defined but never used at all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm90) Use generic i2c reads during detectionJean Delvare2008-02-081-13/+13
| | | | | | | | | | | As indirectly reported by Olof Johansson, the lm90 driver uses a custom i2c read function even during detection, at which point we don't know yet what device we're talking with. It would make more sense to only use the generic i2c read function at this point, so that we don't log irrelevant errors on misdetection. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (lm90) Export temperature offset valuesJean Delvare2007-10-101-4/+25
| | | | | | | | | | Now that we have standard sysfs names to export temperature offset values, add this feature to the lm90 driver. All supported chips except the MAX6657, MAX6658 and MAX6659 support it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Convert from class_device to deviceTony Jones2007-10-101-5/+5
| | | | | | | | | Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Fix regression caused by typo in lm90.cGuillaume Chazarain2007-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=32c82a934759b2c9939c9e25865c2d7d1204b9e8 broke lm90 for my (Asus V6VA) laptop. Before 2.6.23-rc1 and with the following patch, I get: [g ~]$ sensors max6657-i2c-0-4c Adapter: SMBus I801 adapter at 0400 M/B Temp: +64°C (low = +0°C, high = +127°C) CPU Temp: +78.9°C (low = +73.2°C, high = +88.2°C) M/B Crit: +105°C (hyst = +95°C) CPU Crit: +105°C (hyst = +95°C) Which regressed into: [g ~]$ sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. zsh: 2701 exit 1 sensors and dmesg contains: i2c-adapter i2c-0: Unsupported chip (man_id=0x4D, chip_id=0x4D). It seems to be a typo, as address 0X4F is mentionned nowhere else in the file, and my chip is actually at 0x4C. Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Fault files naming conventionJean Delvare2007-07-191-2/+2
| | | | | | | | | | | | | | | | | | | | We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 14:33:53 +0100