summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] hwmon: abituguru timeout fixesHans de Goede2006-08-261-38/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains 2 sets of fixes for the abituguru: 1) Much improved timeout handling, drasticly reducing the amount of timeout errors on some motherboards 2) Fix the exit paths in the bank1 sensor type detect code to always restore the original settings even on an error. Without this our special test settings could remain seriously confusing the system BIOS's setup menu. Both are very much related and are must haves, to avoid messing up the uguru CMOS settings. Detailed changes: - Much improved timeout / wait for status handling. Many thanks to Sunil Kumar, for all his testing, ideas and patches! The code now first busy waits, polling the uguru for the expected status as this usually succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn in timeout conditions, the amount of busy waiting has been halved from previous versions (120 tries instead of 250). This is not a problem, because this version goes to sleep after 120 attemps for 1 jiffy and then tries again, it does this sleep and try again 5 times before finally giving up. This (almost?) completly removes the timeout errors some people have seen regulary. Apparently some older uguru versions sometimes are distracted for a (relatively) long time. This solves this. - These timeout errors not only occur in the sending address part of reading the uguru but also in the wait for read state, so errors in this state are now handled as retryable just like send address state errors and are only logged and reported to userspace if 3 executive tries fail. - Fix a very nasty bug in the bank1 sensor type detection code, where it would not restore the original settings in any of the error paths! - Since not successfully restoring the original settings can seriously confuse the system BIOS (hang when entering the relevant setup menu), we now try restoring them 3 times before giving up. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix for first generation Abit uGuru chipsHans de Goede2006-07-131-2/+19
| | | | | | | | | | | | | | | Now that the abituguru driver is seeing some more widespread testing it has turned out that one the first generation of Abit uGuru motherboards, with uGuru revision 1, the autodetect bank1 sensor type code doesn't (always) work. This patch adds a module param to override the autodetect, and it adds validity checks for the value of the 2 other autodetection override module params. An example of howto use the new param can be found here: http://lm-sensors.org/wiki/Configurations/Abit/AN7 Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-302-2/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* spelling fixesAndreas Mohr2006-06-269-9/+9
| | | | | | | | | | | | acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] hwmon-vid: Add support for Intel Core and ConroeRudolf Marek2006-06-221-7/+28
| | | | | | | | | This patch adds support for two new VID codes, supporting Intel mobile Core processors and new Conroe based platforms. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] lm70: New hardware monitoring driverKaiwan N Billimoria2006-06-223-0/+176
| | | | | | | | | | | | | | | | | | | | This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix the Kconfig headerJean Delvare2006-06-221-1/+1
| | | | | | | Hardware monitoring chips don't have to be on the I2C bus. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] abituguru: Fix fan detectionHans de Goede2006-06-221-3/+2
| | | | | | | | | | | | One of my testers had a problem where the driver only saw 2 of the 4 fan sensors his uGuru has, this fixes this. -accept 0x40 (bit 6) being high as a valid fan sensor setting for all fans not just fan 1, I have a feeling this bit indicates whether or not a fan is actually connected . Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] abituguru: Review fixesHans de Goede2006-06-221-86/+111
| | | | | | | | | | | | | | Fixes to the Abit uGuru driver as requested in review by Jean Delvare: - exactly calculate the sysfs_names array length using macro - use snprintf when generating names to double check that the sysfs_names array does not overflow. - use ARRAY_SIZE and / or defines to determine number of loops in for loops instead of using hardcoded values. - In abituguru_probe(), refactor the error path leaving a single call to kfree Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] abituguru: New hardware monitoring driverHans de Goede2006-06-223-0/+1404
| | | | | | | | New hardware monitoring driver for the Abit uGuru Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83792d: Add missing data access locksYuan Mu2006-06-221-5/+25
| | | | | | | | | Add missing data lock in w83792d driver to avoid unexpected data change. Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83792d: Fix setting the PWM valueYuan Mu2006-06-221-27/+29
| | | | | | | | | | | | | | W83792D use pwm register low 4 bits to store PWM/DC value, bit 7 is used to store fan PWM/DC mode. The store_pwm function did not convert the pwm input correctly, so it may change the fan mode when new value is set. This fix the problem. Change the "index" value of pwm*_mode and pwm* SENSOR_ATTR to simplify code. Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix a typo in the hdaps driverJean Delvare2006-06-221-1/+1
| | | | | | | | Fix a typo in the hdaps driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] HWMON: Trim VID values to correct number of bitsRudolf Marek2006-06-221-1/+8
| | | | | | | | | Following patch trims the VID value to correct number of bits for each VRM. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] HWMON: Improve the help text for CONFIG_HWMONJean Delvare2006-06-221-0/+4
| | | | | | | | | | | Improve the help text for CONFIG_HWMON to let the users know how they pick the right hardware monitoring driver(s) for their system. Also fix a couple typos in the related documentation file and improve some parts a bit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791DCharles Spirakis2006-06-223-0/+1266
| | | | | | | | | | Add support for the w83791d sensor chip. The w83791d hardware is somewhere between the w83781d and the w83792d and this driver code is derived from the code that supports those chips. Signed-off-by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] HWMON: hdaps: Update the list of supported systemsJean Delvare2006-06-221-2/+4
| | | | | | | | | | | | | | Update the list of systems supported by the hdaps driver: * Add the "ThinkPad Z60m" entry, reported by Arkadiusz Miskiewicz. * Add the "ThinkPad H" entry, reported by Frank Gevaerts for some ThinkPad R52 models (1846AQG). * Drop the "ThinkPad X41 Tablet" entry, which looks redundant to me. And a comment update for good measure. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Arkadiusz Miskiewicz <arekm@maven.pl> Cc: Frank Gevaerts <frank@gevaerts.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] f71805f: Resource needs not be globalJean Delvare2006-06-221-8/+7
| | | | | | | | The F71805F I/O resource structure needs not be a global variable, as the platform core allocs its own copy of it anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] smsc47m192: New hwmon driver for SMSC LPC47M192/997Hartmut Rick2006-06-223-1/+671
| | | | | | | | | New driver (smsc47m192) which supports voltage and temperature measurement features of SMSC LPC47M192 and LPC47M997 chips. Signed-off-by: Hartmut Rick <linux@rick.claranet.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83627ehf: Add alarms supportJean Delvare2006-06-221-0/+46
| | | | | | | | | | Add alarms support for the W83627EHF/EHG hardware monitoring chip. This is based on an earlier patch from Rudolf Marek. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83627ehf: Add voltage inputs supportRudolf Marek2006-06-221-4/+120
| | | | | | | | | | Add the voltage measuring support to W83627EHF. The code is based on the patch provided by Yuan Mu from Winbond. Signed-off-by: Yuan Mu <Ymu@winbond.com.tw> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] lm83: Add LM82 supportJordan Crouse2006-06-222-15/+39
| | | | | | | | | Add LM82 temperature sensor support (similar to the LM83, but less featureful). Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83792d: Be quiet on misdetectionJean Delvare2006-04-141-2/+3
| | | | | | | | | | Make the w83792d driver keep quiet when misdetecting a chip. This can happen, and the user doesn't need to know. Also renumber the messages, and add one, for consistency. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hdaps: use ENODEVAndrew Morton2006-04-111-1/+1
| | | | | | | | | Use ENODEV when the hdaps hardware isn't there, not ENXIO. Cc: Jean Delvare <khali@linux-fr.org> Cc: Robert Love <rml@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hdaps: support new Lenovo machinesRobert Love2006-04-111-0/+11
| | | | | | | | | | Add support for forthcoming Lenovo-branded machines to the HDAPS driver. Signed-off-by: Robert Love <rml@novell.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hdaps: add support for Thinkpad R52Frank Gevaerts2006-04-111-0/+1
| | | | | | | | | | | | This adds support for my Thinkpad R52, which for some reason is not matched by the "ThinkPad R52" line. Signed-off-by: Frank Gevaerts <frank@gevaerts.be> Cc: Robert Love <rml@novell.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] revert incorrect mutex conversion in hdaps driverArjan van de Ven2006-04-021-19/+18
| | | | | | | | | | | | This reverts the mutex conversion that was recently done to the hdaps driver; this coversion was buggy because the hdaps driver started using this semaphore in IRQ context, which mutexes do not allow. Easiest solution for now is to just revert the patch (the patch was part of a bigger GIT commit, 9a61bf6300533d3b64d7ff29adfec00e596de67d but this only reverts this one file) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] s/;;/;/gAlexey Dobriyan2006-03-241-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hwmon: add required idr lockingMark M. Hoffman2006-03-231-6/+20
| | | | | | | | | | | | | Add required locking around idr_ routines, retry the idr_pre_get/idr_get_new pair properly, and sprinkle in some likely/unlikely for good measure. (Lack of idr locking didn't hurt when all callers were I2C clients, as the i2c-core serialized for us anyway. Now that we have non I2C hwmon drivers, this is truly necessary.) Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: hwmon: Rename register parametersDarren Jenkins2006-03-238-20/+16
| | | | | | | | | | | | "register" is a reserved keyword so using it as a parameter name can confuse some compilers, most notably ICC. The patch below just renames all occurences to reg which fits the actual function declarations. Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83781d: Don't reset the chip by defaultJean Delvare2006-03-231-1/+21
| | | | | | | | | Stop resetting the chip on load by default, so as to preserve the BIOS initializations. Same was done in the w83627hf driver some times ago for the same reasons. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83627ehf: Refactor the sysfs interfaceYuan Mu2006-03-231-126/+80
| | | | | | | | Use dynamic sysfs callbacks and array of attributes to reduce the w83627ehf driver size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Support the Pentium M VID codeJean Delvare2006-03-231-1/+8
| | | | | | | | Add support for the Intel Pentium M series to the hwmon-vid driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Add support for the Winbond W83687THFJean Delvare2006-03-232-17/+62
| | | | | | | | | | Add support for the Winbond W83687THF chip to the w83627hf hardware monitoring driver. This new chip is almost similar to the already supported W83627THF chip, except for VID and a few other minor changes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: f71805f semaphore to mutex conversionsJean Delvare2006-03-231-28/+29
| | | | | | | | Convert the new f71805f hardware monitoring driver to use mutexes instead of semaphores. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Semaphore to mutex conversionsIngo Molnar2006-03-2336-596/+632
| | | | | | | | | | | | | convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: w83792d drop useless macrosJean Delvare2006-03-231-21/+3
| | | | | | | Drop 3 useless macros in the w83792d hardware monitoring driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: w83792d use arrays of attributesYuan Mu2006-03-231-284/+241
| | | | | | | | | Use arrays of attributes in the w83792d driver. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Use attribute arrays in f71805fJean Delvare2006-03-231-115/+103
| | | | | | | | | | | | | Convert the f71805f driver to use arrays of attributes. This shrinks the compiled module from 12.0 kB to 9.6 kB. We certainly should do the same for as many hardware monitoring drivers as possible. This, together with a nice chip design by Fintek, makes this driver very small, both in terms of number of lines of code and memory consumption. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Use attribute arrays in pc87360Jim Cromie2006-03-231-207/+201
| | | | | | | | | Convert individual sensors to sensor-attr arrays by each sensor type, and initialize them in loops instead of long blocks of individual calls. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] it87: Fix oops on removalJean Delvare2006-02-141-1/+2
| | | | | | | | Fix an oops on it87 module removal when no supported hardware was found. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] w83781d: Use real-time status registersJean Delvare2006-02-141-18/+25
| | | | | | | | | | | Use the real-time status registers of the Winbond W83782D, W83783S and W83627HF chips, instead of the interrupt status registers. Interrupts cannot be trusted at least for voltage inputs, as they are two-times triggers (as opposed to comparator mode, which we want.) The w83627hf driver was fixed in a similar way some times ago. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] vt8231: Fix sysfs temperature interfaceJean Delvare2006-02-141-4/+4
| | | | | | | | | The VT8231 low temperature limits are actually hysteresis temperatures to the high limits. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix reboot on it87 driver loadJean Delvare2006-02-061-2/+6
| | | | | | | | | | | | | | | | | Only scan I2C address 0x2d. This is the default address and no IT87xxF chip was ever seen on I2C at a different address. These chips are better accessed through their ISA interface anyway. This fixes bug #5889, although it doesn't address the whole class of problems. We'd need the ability to blacklist arbitrary I2C addresses on systems known to contain I2C devices which behave badly when probed. Plan the I2C interface for removal as well. If nobody complains within a year, it will confirm my impression that the I2C interface isn't actually needed by anyone. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: New f71805f driverJean Delvare2006-02-063-0/+919
| | | | | | | | | | | | | | | This is my f71805f hardware monitoring driver ported from lm_sensors to Linux 2.6. This new driver differs from the other hardware monitoring drivers in that it is implemented as a platform driver. This might not be optimal yet (we would probably need a generic infrastructure and bus type for Super-I/O logical devices) but it is certainly much better than the i2c-isa solution. Note that this driver requires lm_sensors CVS. I hope to get it released as 2.10.0 soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Inline w83792d register access functionsJean Delvare2006-02-061-17/+14
| | | | | | | | Inline w83792d_{read,write}_value for better performance. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Yuan Mu <Ymu@winbond.com.tw> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix negative temperature readings in lm77 driverJean Delvare2006-02-061-4/+4
| | | | | | | | Fix negative temperature readings in lm77 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Renzmann <mrenzmann@otaku42.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] drivers/*rest*: Replace pci_module_init() with pci_register_driver()Richard Knutsson2006-01-091-1/+1
| | | | | | | Replace obsolete pci_module_init() with pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: it87 use u8 for vrmJean Delvare2006-01-061-2/+2
| | | | | | | VRM values fit in u8 by design now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: add VRM/VID support for some VIA CPUsRudolf Marek2006-01-061-27/+42
| | | | | | | | | | | | This patch adds the VIA CENTAUR CPUs to detection table. Table was updated to treat future Intel x86 CPUs as VRD10. Stepping field was added, because some VIA CPUs have different VRM specs across stepping. I changed the vrm type to u8 because all drivers use u8 anyway. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 13:01:46 +0100