summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-aspeed.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* i2c: aspeed: Fix the dummy irq expected printTommy Huang2024-03-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | When the i2c error condition occurred and master state was not idle, the master irq function will goto complete state without any other interrupt handling. It would cause dummy irq expected print. Under this condition, assign the irq_status into irq_handle. For example, when the abnormal start / stop occurred (bit 5) with normal stop status (bit 4) at same time. Then the normal stop status would not be handled and it would cause irq expected print in the aspeed_i2c_bus_irq. ... aspeed-i2c-bus x. i2c-bus: irq handled != irq. Expected 0x00000030, but was 0x00000020 ... Fixes: 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly") Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
* i2c: aspeed: Handle the coalesced stop conditions with the start conditions.Quan Nguyen2023-12-191-16/+32
| | | | | | | | | | | | | | | | | | Some masters may drive the transfers with low enough latency between the nak/stop phase of the current command and the start/address phase of the following command that the interrupts are coalesced by the time we process them. Handle the stop conditions before processing SLAVE_MATCH to fix the complaints that sometimes occur below. "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected 0x00000086, but was 0x00000084" Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver") Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Fix i2c bus hang in slave readJian Zhang2023-10-101-1/+2
| | | | | | | | | | | | | | | | | | | When the `CONFIG_I2C_SLAVE` option is enabled and the device operates as a slave, a situation arises where the master sends a START signal without the accompanying STOP signal. This action results in a persistent I2C bus timeout. The core issue stems from the fact that the i2c controller remains in a slave read state without a timeout mechanism. As a consequence, the bus perpetually experiences timeouts. In this case, the i2c bus will be reset, but the slave_state reset is missing. Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs") Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com> Acked-by: Andi Shyti <andi.shyti@kernel.org> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Reset the i2c controller when timeout occursTommy Huang2023-09-131-2/+5
| | | | | | | | | | | | Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: Convert to platform remove callback returning voidUwe Kleine-König2023-06-051-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Chris Pringle <chris.pringle@phabrix.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Tali Perry <tali.perry@nuvoton.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Use devm_platform_get_and_ioremap_resource()ye xingchen2023-01-201-3/+1
| | | | | | | | | | Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Assert NAK when slave is busyQuan Nguyen2022-10-051-1/+8
| | | | | | | | | | On I2C_SLAVE_WRITE_REQUESTED event, Slave already ACK'ed on the address phase. But as the backend driver is busy and unable to process any request from Master, issue RxCmdLast for Slave to auto send NACK on next incoming byte. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: move drivers from strlcpy to strscpyWolfram Sang2022-08-111-1/+1
| | | | | | | | | | Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no driver used the return value and has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Remove unused includesThierry Reding2021-12-161-2/+0
| | | | | | | | | No symbols from the linux/irqchip/chained_irq.h and linux/irqdomain.h headers are used in the driver, so they can be removed. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: disable additional device addresses on ast2[56]xxZev Weiss2021-05-271-4/+8
| | | | | | | | | | | | | | The ast25xx and ast26xx have, respectively, two and three configurable slave device addresses to the ast24xx's one. We only support using one at a time, but the others may come up in an indeterminate state depending on hardware/bootloader behavior, so we need to make sure we disable them so as to avoid ending up with phantom devices on the bus. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Mask IRQ status to relevant bitsEddie James2020-09-141-0/+2
| | | | | | | | | | Mask the IRQ status to only the bits that the driver checks. This prevents excessive driver warnings when operating in slave mode when additional bits are set that the driver doesn't handle. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: busses: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-07-231-2/+2
| | | | | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen2020-04-301-1/+4
| | | | | | | | | | | | | In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: drivers: Use generic definitions for bus frequenciesAndy Shevchenko2020-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we have generic definitions for bus frequencies, let's use them. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Robert Richter <rrichter@marvell.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Elie Morisse <syniurge@gmail.com> Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-5.5' of ↵Linus Torvalds2019-12-021-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has mostly driver updates this time. The few noteworthy changes are: the core has now support for analog and digital filters with at91 being the first user, a core addition to replace the NULL returning i2c_new_probed_device() with an ERR_PTR variant, and the pxa driver has finally being moved to use the generic I2C slave interface. We have quite a significant number of reviews per patch this time, so thank you to all involved!" * 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) video: fbdev: matrox: convert to i2c_new_scanned_device i2c: icy: convert to i2c_new_scanned_device i2c: replace i2c_new_probed_device with an ERR_PTR variant i2c: Fix Kconfig indentation i2c: smbus: Don't filter out duplicate alerts i2c: i801: Correct Intel Jasper Lake SOC naming i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop i2c: iproc: Add i2c repeated start capability i2c: remove helpers for ref-counting clients i2c: tegra: Use dma_request_chan() directly for channel request i2c: sh_mobile: Use dma_request_chan() directly for channel request i2c: qup: Use dma_request_chan() directly for channel request i2c: at91: Use dma_request_chan() directly for channel request i2c: rcar: Remove superfluous call to clk_get_rate() i2c: pxa: remove unused i2c-slave APIs i2c: pxa: migrate to new i2c_slave APIs i2c: cros-ec-tunnel: Make the device acpi compatible i2c: stm32f7: report dma error during probe i2c: icy: no need to populate address for scanned device i2c: xiic: Fix kerneldoc warnings ...
| * i2c: Aspeed: Add AST2600 compatibleEddie James2019-10-211-0/+4
| | | | | | | | | | | | | | | | | | | | The driver default behavior works with the AST2600. We need a new compatible though to make sure the driver doesn't enable AST2400 or AST2500 behavior. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: aspeed: fix master pending state handlingJae Hyun Yoo2019-10-211-20/+34
|/ | | | | | | | | | | | | | | | | | In case of master pending state, it should not trigger a master command, otherwise data could be corrupted because this H/W shares the same data buffer for slave and master operations. It also means that H/W command queue handling is unreliable because of the buffer sharing issue. To fix this issue, it clears command queue if a master command is queued in pending state to use S/W solution instead of H/W command queue handling. Also, it refines restarting mechanism of the pending master command. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <taoren@fb.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c: aspeed: Add multi-master use case supportJae Hyun Yoo2019-02-151-26/+93
| | | | | | | | | | | | | | | | | | | | | | | In multi-master environment, this driver's master cannot know exactly when a peer master sends data to this driver's slave so cases can be happened that this master tries sending data through the master_xfer function but slave data from a peer master is still being processed or slave xfer is started by a peer immediately after it queues a master command. To support multi-master use cases properly, this H/W provides arbitration in physical level and it provides priority based command handling too to avoid conflicts in multi-master environment, means that if a master and a slave events happen at the same time, H/W will handle a higher priority event first and a pending event will be handled when bus comes back to the idle state. To support this H/W feature properly, this patch adds the 'pending' state of master and its handling code so that the pending master xfer can be continued after slave operation properly. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Remove hard-coded bus timeout value settingJae Hyun Yoo2019-01-231-1/+0
| | | | | | | | | | This commit removes hard-coded bus timeout value setting so that it can be set by i2c-core-base. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: fix invalid clock parameters for very large divisorsBrendan Higgins2018-09-241-20/+45
| | | | | | | | | | | | | | The function that computes clock parameters from divisors did not respect the maximum size of the bitfields that the parameters were written to. This fixes the bug. This bug can be reproduced with (and this fix verified with) the test at: https://kunit-review.googlesource.com/c/linux/+/1035/ Discovered-by-KUnit: https://kunit-review.googlesource.com/c/linux/+/1035/ Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: use proper annotation for "fall through"Wolfram Sang2018-09-241-2/+2
| | | | | | | | | | | Use a better annotation, so GCC won't complain anymore: drivers/i2c/busses/i2c-aspeed.c:458:15: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Acknowledge most interrupts early in interrupt handlerGuenter Roeck2018-09-241-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly") moved interrupt acknowledgment to the end of the interrupt handler. In part this was done because the AST2500 datasheet says: I2CD10 Interrupt Status Register bit 2 Receive Done Interrupt status S/W needs to clear this status bit to allow next data receiving. Acknowledging Receive Done before receive data was handled resulted in receive errors on high speed I2C busses. However, interrupt acknowledgment was not only moved to the end of the interrupt handler for Receive Done Interrupt status, but for all interrupt status bits. This could result in race conditions if a second interrupt was received during interrupt handling and not handled but still acknowledged at the end of the interrupt handler. Acknowledge only "Receive Done Interrupt status" late in the interrupt handler to solve the problem. Fixes: 3e9efc3299dd ("i2c: aspeed: Handle master/slave combined irq events properly") Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Tested-by: Joel Stanley <joel@jms.id.au> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Handle master/slave combined irq events properlyJae Hyun Yoo2018-09-061-55/+76
| | | | | | | | | | | | | | | | | | | | In most of cases, interrupt bits are set one by one but there are also a lot of other cases that Aspeed I2C IP sends multiple interrupt bits with combining master and slave events using a single interrupt call. It happens much more in multi-master environment than single-master. For an example, when master is waiting for a NORMAL_STOP interrupt in its MASTER_STOP state, SLAVE_MATCH and RX_DONE interrupts could come along with the NORMAL_STOP in case of an another master immediately sends data just after acquiring the bus. In this case, the NORMAL_STOP interrupt should be handled by master_irq and the SLAVE_MATCH and RX_DONE interrupts should be handled by slave_irq. This commit modifies irq hadling logic to handle the master/slave combined events properly. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Add an explicit type casting for *get_clk_reg_valJae Hyun Yoo2018-08-041-1/+1
| | | | | | | | | | | | This commit fixes this sparse warning: drivers/i2c/busses/i2c-aspeed.c:875:38: warning: incorrect type in assignment (different modifiers) drivers/i2c/busses/i2c-aspeed.c:875:38: expected unsigned int ( *get_clk_reg_val )( ... ) drivers/i2c/busses/i2c-aspeed.c:875:38: got void const *const data Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Adjust spinlock scope in the irq handlerJae Hyun Yoo2018-07-211-6/+10
| | | | | | | | | | This patch adjusts spinlock scope to make it wrap the whole irq handler using a single lock/unlock which covers both master and slave handlers. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Fix initial values of master and slave stateJae Hyun Yoo2018-07-211-2/+2
| | | | | | | | | | | | | This patch changes the order of enum aspeed_i2c_master_state and enum aspeed_i2c_slave_state defines to make their initial value to ASPEED_I2C_MASTER_INACTIVE and ASPEED_I2C_SLAVE_STOP respectively. In case of multi-master use, if a slave data comes ahead of the first master xfer, master_state starts from an invalid state so this change fixes the issue. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Add newline characters into message printings.Jae Hyun Yoo2018-07-211-9/+9
| | | | | | | | | There are some log printing without a newline character. This patch adds the missing newline characters. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: busses: make use of i2c_8bit_addr_from_msgPeter Rosin2018-05-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Because it looks neater. For diolan, this allows factoring out some code that is now common between if and else. For eg20t, pch_i2c_writebytes is always called with a write in msgs->flags, and pch_i2c_readbytes with a read. For imx, i2c_imx_dma_write and i2c_imx_write are always called with a write in msgs->flags, and i2c_imx_read with a read. For qup, qup_i2c_write_tx_fifo_v1 is always called with a write in qup->msg->flags. For stu300, also restructure debug output for resends, since that code as a result is only handling debug output. Reviewed-by: Guenter Roeck <linux@roeck-us.net> [diolan] Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [efm32 and imx] Acked-by: Linus Walleij <linus.walleij@linaro.org> [stu300] Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: Deassert reset in probeJoel Stanley2017-11-061-0/+12
| | | | | | | | | | | | | | | | | | In order to use i2c from a cold boot, the i2c peripheral must be taken out of reset. We request a shared reset controller each time a bus driver is loaded, as the reset is shared between the 14 i2c buses. On remove the reset is asserted, which only touches the hardware once the last i2c bus is removed. The reset is required as the I2C buses will not work without releasing the reset. Previously the driver only worked with out of tree hacks that released this reset before the driver was loaded. Update the device tree bindings to reflect this. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Merge branch 'i2c/for-4.14' of ↵Linus Torvalds2017-09-091-18/+63
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS - quite some driver updates - cleanups for the i2c-mux subsystem - some subsystem-wide constification - further cleanup of include/linux/i2c * 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits) i2c: sprd: Fix undefined reference errors i2c: nomadik: constify amba_id i2c: versatile: Make i2c_algo_bit_data const i2c: busses: make i2c_adapter_quirks const i2c: busses: make i2c_adapter const i2c: busses: make i2c_algorithm const i2c: Add Spreadtrum I2C controller driver dt-bindings: i2c: Add Spreadtrum I2C controller documentation i2c-cht-wc: make cht_wc_i2c_adap_driver static MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones i2c: i801: Restore the presence state of P2SB PCI device after reading BAR MAINTAINERS: drop entry for Blackfin I2C and Sonic's email blackfin: merge the two TWI header files i2c: davinci: Preserve return value of devm_clk_get i2c: mediatek: Add i2c compatible for MediaTek MT7622 dt-bindings: i2c: Add MediaTek MT7622 i2c binding dt-bindings: i2c: modify information formats i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support ...
| * i2c: aspeed: Retain delay/setup/hold values when configuring bus frequencyAndrew Jeffery2017-08-281-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to the base, low and high clock configuration, the AC timing register #1 on the AST2400 houses fields controlling: 1. tBUF: Minimum delay between Stop and Start conditions 2. tHDSTA: Hold time for the Start condition 3. tACST: Setup time for Start and Stop conditions, and hold time for the Repeated Start condition These values are defined in hardware on the AST2500 and therefore don't need to be set. aspeed_i2c_init_clk() was performing a direct write of the generated clock values rather than a read/mask/modify/update sequence to retain tBUF, tHDSTA and tACST, and therefore cleared the tBUF, tHDSTA and tACST fields on the AST2400. This resulted in a delay/setup/hold time of 1 base clock, which in some configurations is not enough for some devices (e.g. the MAX31785 fan controller, with an APB of 48MHz and a desired bus speed of 100kHz). Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * i2c: aspeed: add proper support fo 24xx clock paramsBrendan Higgins2017-08-141-18/+56
| | | | | | | | | | | | | | | | | | | | | | | | 24xx BMCs have larger clock divider granularity which can cause problems when trying to set them as 25xx clock dividers; this adds clock setting code specific to 24xx. This also fixes a potential issue where clock dividers were rounded down instead of up. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | i2c: aspeed: fixed potential null pointer dereferenceBrendan Higgins2017-08-141-2/+3
|/ | | | | | | | | | Before I skipped null checks when the master is in the STOP state; this fixes that. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
* i2c: aspeed: added slave support for Aspeed I2C driverBrendan Higgins2017-06-231-0/+201
| | | | | | | | Added slave support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: aspeed: added driver for Aspeed I2CBrendan Higgins2017-06-231-0/+690
Added initial master support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 06:59:31 +0100