summaryrefslogtreecommitdiffstats
path: root/drivers/i3c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* i3c: export SETDASA methodJack Chen2022-12-113-0/+40
| | | | | | | | | | | | | | | | | Because not all I3C drivers have the hot-join feature ready, and especially not all I3C devices support hot-join feature, exporting SETDASA method could be useful. With this function, the I3C controller could perform a DAA to I3C devices when users decide to turn these I3C devices off and on again during run-time. Tested: This change has been tested with turnning off an I3C device and turning on it again during run-time. The device driver calls SETDASA method to perform DAA to the device. And communication between I3C controller and device is set up again correctly. Signed-off-by: Jack Chen <zenghuchen@google.com> Link: https://lore.kernel.org/r/20221207205059.3848851-1-zenghuchen@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: Remove the wrong place of reattach.Billy Tsai2022-10-121-4/+0
| | | | | | | | | | | | The reattach should be used when an I3C device has its address changed. But the modified place in this patch doesn't have the address changed of the newdev. This wrong reattach will reserve the same address slot twice and return unexpected -EBUSY when the bus find the duplicate device with diffent dynamic address. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20220926105145.8145-2-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: Free the old_dyn_addr when reattach.Billy Tsai2022-10-121-0/+3
| | | | | | | | | | | | This patch is used to free the old_dyn_addr when the caller want to reattach the device to the different dynamic address. If the old_dyn_addr is 0 the function will treat it as no old_dyn_addr is reserved on the bus. Without the patch, when the driver reattach the i3c device after setnewda the old_dyn_addr will be permanently occupied. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20220926105145.8145-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: svc: fix returnvar.cocci warningGuo Zhengkui2022-05-171-2/+1
| | | | | | | | | | | | Fix the following coccicheck warning: drivers/i3c/master/svc-i3c-master.c:1600:5-8: Unneeded variable: "ret". Return "0" on line 1605. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220504164901.9622-1-guozhengkui@vivo.com
* i3c/master: simplify the return expression of i3c_hci_remove()Minghao Chi2022-05-171-6/+1
| | | | | | | | | Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220505021954.54524-1-chi.minghao@zte.com.cn
* i3c: fix uninitialized variable use in i2c setupJamie Iles2022-03-081-1/+6
| | | | | | | | | | | | | | | | | Commit 31b9887c7258 ("i3c: remove i2c board info from i2c_dev_desc") removed the boardinfo from i2c_dev_desc to decouple device enumeration from setup but did not correctly lookup the i2c_dev_desc to store the new device, instead dereferencing an uninitialized variable. Lookup the device that has already been registered by address to store the i2c client device. Fixes: 31b9887c7258 ("i3c: remove i2c board info from i2c_dev_desc") Reported-by: kernel test robot <lkp@intel.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220308134226.1042367-1-quic_jiles@quicinc.com
* i3c: support dynamically added i2c devicesJamie Iles2022-03-041-1/+127
| | | | | | | | | | | | | | | | I2C devices can be added to the system dynamically through several sources other than static board info including device tree overlays and sysfs i2c new_device. Add an I2C bus notifier to attach the clients at runtime if they were not defined in the board info. For DT devices find the LVR in the reg property, for user-space new_device additions we synthesize a conservative setting of no spike filters and fast mode only. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220117174816.1963463-3-quic_jiles@quicinc.com
* i3c: remove i2c board info from i2c_dev_descJamie Iles2022-03-041-8/+10
| | | | | | | | | | | | I2C board info is only required during adapter setup so there is no requirement to keeping a pointer to it once running. To support dynamic device addition we can't rely on board info - user-space creation through sysfs won't have a boardinfo. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220117174816.1963463-2-quic_jiles@quicinc.com
* i3c: master: dw: check return of dw_i3c_master_get_free_pos()Tom Rix2022-01-131-0/+4
| | | | | | | | | | | | | | | | Clang static analysis reports this problem dw-i3c-master.c:799:9: warning: The result of the left shift is undefined because the left operand is negative COMMAND_PORT_DEV_INDEX(pos) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ pos can be negative because dw_i3c_master_get_free_pos() can return an error. So check for an error. Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220108150948.3988790-1-trix@redhat.com
* i3c: master: mipi-i3c-hci: correct the config reference for endiannessLukas Bulwahn2022-01-051-1/+1
| | | | | | | | | | | | The referred config BIG_ENDIAN does not exist. The config for the endianness of the CPU architecture is called CPU_BIG_ENDIAN. Correct the config name to the existing config for the endianness. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220103094504.3602-1-lukas.bulwahn@gmail.com
* i3c: master: svc: enable the interrupt in the enable ibi functionClark Wang2022-01-051-2/+4
| | | | | | | | | | | | | If enable interrupt in the svc_i3c_master_bus_init() but do not call enable ibi in the device driver, it will cause a kernel dump in the svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus, because the data->ibi_pool is not initialized. So only enable the interrupt in svc_i3c_master_enable_ibi() function. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-9-xiaoning.wang@nxp.com
* i3c: master: svc: add the missing module device tableClark Wang2022-01-051-0/+1
| | | | | | | | | | | | The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot be auto probed when it is built in moudle. So add it. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-8-xiaoning.wang@nxp.com
* i3c: master: svc: add runtime pm supportClark Wang2022-01-051-40/+156
| | | | | | | | | | Add runtime pm support to dynamically manage the clock. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-7-xiaoning.wang@nxp.com
* i3c: master: svc: set ODSTOP to let I2C device see the STOP signalClark Wang2022-01-051-2/+5
| | | | | | | | | | | If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C devices cannot see the stop signal. It may cause message sending errors. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-6-xiaoning.wang@nxp.com
* i3c: master: svc: add support for slave to stop returning dataClark Wang2022-01-051-16/+40
| | | | | | | | | | | | | When i3c controller reads data from slave device, slave device can stop returning data with an ACK after any byte. Add this support for svc i3c controller. Otherwise, it will timeout when the slave device ends the read operation early. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-5-xiaoning.wang@nxp.com
* i3c: master: svc: separate err, fifo and disable interrupt of reset functionClark Wang2022-01-051-25/+34
| | | | | | | | | | | | Sometimes only need to reset err and fifo regs, so split the origin reset function to three functions. Put them at the top of the file, to let more functions can call them. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-4-xiaoning.wang@nxp.com
* i3c: master: svc: fix atomic issueClark Wang2022-01-051-11/+15
| | | | | | | | | | | | do_daa_locked() function is in a spin lock environment, use readl_poll_timeout_atomic() to replace the origin readl_poll_timeout(). Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-3-xiaoning.wang@nxp.com
* i3c: master: svc: move module reset behind clk enableClark Wang2022-01-051-2/+2
| | | | | | | | | | Reset I3C module will R/W its regs, so enable its clocks first. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-2-xiaoning.wang@nxp.com
* i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in ↵Christophe JAILLET2021-12-101-3/+1
| | | | | | | | | | | | | | | | | | | | 'hci_dat_v1_get_index()' The code in 'hci_dat_v1_get_index()' really looks like a hand coded version of 'for_each_set_bit()', except that a +1 is missing when searching for the next set bit. This really looks odd and it seems that it will loop until 'dat_w0_read()' returns the expected result. So use 'for_each_set_bit()' instead. It is less verbose and should be more correct. Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/0cdf3cb10293ead1acd271fdb8a70369c298c082.1637186628.git.christophe.jaillet@wanadoo.fr
* i3c: fix incorrect address slot lookup on 64-bitJamie Iles2021-12-101-1/+2
| | | | | | | | | | | | | | The address slot bitmap is an array of unsigned long's which are the same size as an int on 32-bit platforms but not 64-bit. Loading the bitmap into an int could result in the incorrect status being returned for a slot and slots being reported as the wrong status. Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210922165600.179394-1-quic_jiles@quicinc.com
* i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmeticLen Baker2021-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210912155135.7541-1-len.baker@gmx.com
* i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmeticLen Baker2021-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210905144054.5124-1-len.baker@gmx.com
* bus: Make remove callback return voidUwe Kleine-König2021-07-211-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'i3c/for-5.14' of ↵Linus Torvalds2021-07-101-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: - two small fixes to the svc driver * tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: svc: fix doc warning in svc-i3c-master.c i3c: master: svc: drop free_irq of devm_request_irq allocated irq
| * i3c: master: svc: fix doc warning in svc-i3c-master.cYang Yingliang2021-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix the following make W=1 warning: drivers/i3c/master/svc-i3c-master.c:207: warning: expecting prototype for struct svc_i3c_i3c_dev_data. Prototype was for struct svc_i3c_i2c_dev_data instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210602085544.4101980-1-yangyingliang@huawei.com
| * i3c: master: svc: drop free_irq of devm_request_irq allocated irqYang Yingliang2021-06-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | irq allocated with devm_request_irq() will be freed in devm_irq_release(), using free_irq() in ->remove() will causes a dangling pointer, and a subsequent double free. So remove the free_irq() in svc_i3c_master_remove(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210602084935.3977636-1-yangyingliang@huawei.com
* | i3c: master: cdns: Fix fall-through warning for ClangGustavo A. R. Silva2021-06-291-0/+2
|/ | | | | | | | | In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* Revert "i3c master: fix missing destroy_workqueue() on error in ↵Jae Hyun Yoo2021-04-241-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i3c_master_register" Adding the destroy_workqueue call in i3c_master_register introduced below kernel warning because it makes duplicate destroy_workqueue calls when i3c_master_register fails after allocating the workqueue. The workqueue will be destroyed by i3c_masterdev_release which is called by put_device at the end of the i3c_master_register function eventually in failure cases so the workqueue doesn't need to be destroyed in i3c_master_register. [ 6.972952] WARNING: CPU: 1 PID: 1 at lib/list_debug.c:48 __list_del_entry_valid+0x9c/0xf4 [ 6.982205] list_del corruption, 8fe03c08->prev is LIST_POISON2 (00000122) [ 6.989910] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.10.23-c12838a-dirty-31dc772 #1 [ 7.000295] Hardware name: Generic DT based system [ 7.005638] Backtrace: [ 7.008369] [<809133f0>] (dump_backtrace) from [<80913644>] (show_stack+0x20/0x24) [ 7.016819] r7:00000030 r6:60000013 r5:00000000 r4:813b5d40 [ 7.023137] [<80913624>] (show_stack) from [<8091e1a0>] (dump_stack+0x9c/0xb0) [ 7.031201] [<8091e104>] (dump_stack) from [<8011fa30>] (__warn+0xf8/0x154) [ 7.038972] r7:00000030 r6:00000009 r5:804fa1c8 r4:80b6eca4 [ 7.045289] [<8011f938>] (__warn) from [<80913d14>] (warn_slowpath_fmt+0x8c/0xc0) [ 7.053641] r7:00000030 r6:80b6eca4 r5:80b6ed74 r4:818cc000 [ 7.059960] [<80913c8c>] (warn_slowpath_fmt) from [<804fa1c8>] (__list_del_entry_valid+0x9c/0xf4) [ 7.069866] r9:96becf8c r8:818cc000 r7:8fe03c10 r6:8fe03c00 r5:8fe03ba0 r4:ff7ead4c [ 7.078513] [<804fa12c>] (__list_del_entry_valid) from [<8013f0b4>] (destroy_workqueue+0x1c4/0x23c) [ 7.088615] [<8013eef0>] (destroy_workqueue) from [<806aa124>] (i3c_masterdev_release+0x40/0xb0) [ 7.098421] r7:00000000 r6:81a43b80 r5:8fe65360 r4:8fe65048 [ 7.104740] [<806aa0e4>] (i3c_masterdev_release) from [<805f3f04>] (device_release+0x40/0xb0) [ 7.114254] r5:00000000 r4:8fe65048 [ 7.118245] [<805f3ec4>] (device_release) from [<808fe754>] (kobject_put+0xc8/0x204) [ 7.126885] r5:813978dc r4:8fe65048 [ 7.130877] [<808fe68c>] (kobject_put) from [<805f5fbc>] (put_device+0x20/0x24) [ 7.139037] r7:8fe65358 r6:8fe65368 r5:8fe65358 r4:8fe65048 [ 7.145355] [<805f5f9c>] (put_device) from [<806abac4>] (i3c_master_register+0x338/0xb00) [ 7.154487] [<806ab78c>] (i3c_master_register) from [<806ae084>] (dw_i3c_probe+0x224/0x24c) [ 7.163811] r10:00000000 r9:8fe7a100 r8:00000032 r7:819fa810 r6:819fa800 r5:8fe65040 [ 7.172547] r4:00000000 [ 7.175376] [<806ade60>] (dw_i3c_probe) from [<805fdc14>] (platform_drv_probe+0x44/0x80) [ 7.184409] r9:813a25c0 r8:00000000 r7:815ec114 r6:00000000 r5:813a25c0 r4:819fa810 [ 7.193053] [<805fdbd0>] (platform_drv_probe) from [<805fb83c>] (really_probe+0x108/0x50c) [ 7.202275] r5:815ec004 r4:819fa810 [ 7.206265] [<805fb734>] (really_probe) from [<805fc180>] (driver_probe_device+0xb4/0x190) [ 7.215492] r10:813dc000 r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa810 r5:00000000 [ 7.224228] r4:813a25c0 [ 7.227055] [<805fc0cc>] (driver_probe_device) from [<805fc5cc>] (device_driver_attach+0xb8/0xc0) [ 7.236959] r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa854 r4:819fa810 [ 7.244439] [<805fc514>] (device_driver_attach) from [<805fc65c>] (__driver_attach+0x88/0x16c) [ 7.254051] r7:00000000 r6:819fa810 r5:00000000 r4:813a25c0 [ 7.260369] [<805fc5d4>] (__driver_attach) from [<805f954c>] (bus_for_each_dev+0x88/0xc8) [ 7.269489] r7:00000000 r6:818cc000 r5:805fc5d4 r4:813a25c0 [ 7.275806] [<805f94c4>] (bus_for_each_dev) from [<805fc76c>] (driver_attach+0x2c/0x30) [ 7.284739] r7:81397c98 r6:00000000 r5:8fe7db80 r4:813a25c0 [ 7.291057] [<805fc740>] (driver_attach) from [<805f9eec>] (bus_add_driver+0x120/0x200) [ 7.299984] [<805f9dcc>] (bus_add_driver) from [<805fce44>] (driver_register+0x98/0x128) [ 7.309005] r7:80c4383c r6:00000000 r5:00000000 r4:813a25c0 [ 7.315323] [<805fcdac>] (driver_register) from [<805fedb4>] (__platform_driver_register+0x50/0x58) [ 7.325410] r5:818cc000 r4:81397c98 [ 7.329404] [<805fed64>] (__platform_driver_register) from [<80c23398>] (dw_i3c_driver_init+0x24/0x28) [ 7.339790] r5:818cc000 r4:80c23374 [ 7.343784] [<80c23374>] (dw_i3c_driver_init) from [<80c01300>] (do_one_initcall+0xac/0x1d0) [ 7.353206] [<80c01254>] (do_one_initcall) from [<80c01630>] (kernel_init_freeable+0x1a8/0x204) [ 7.362916] r8:000000d9 r7:80c4383c r6:00000007 r5:819ca2c0 r4:80c67680 [ 7.370398] [<80c01488>] (kernel_init_freeable) from [<8091eb18>] (kernel_init+0x18/0x12c) [ 7.379616] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8091eb00 [ 7.388343] r4:00000000 [ 7.391170] [<8091eb00>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 7.399607] Exception stack(0x818cdfb0 to 0x818cdff8) [ 7.405243] dfa0: 00000000 00000000 00000000 00000000 [ 7.414371] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.423499] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 7.430879] r5:8091eb00 r4:00000000 This reverts commit 59165d16c699182b86b5c65181013f1fd88feb62. Fixes: 59165d16c699 ("i3c master: fix missing destroy_workqueue() on error in i3c_master_register") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210408172803.24599-1-jae.hyun.yoo@linux.intel.com
* i3c: master: svc: remove redundant assignment to cmd->read_lenColin Ian King2021-03-091-1/+0
| | | | | | | | | | | | | The assignment of xfer_len to cmd->read_len appears to be redundant as the next statement re-assigns the value 0 to it. Clean up the code by removing the redundant first assignment. Addresses-Coverity: ("Unused value") Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210224151349.202332-1-colin.king@canonical.com
* Merge tag 'i3c/for-5.12' of ↵Linus Torvalds2021-02-226-10/+1496
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c update from Alexandre Belloni: "Subsystem: - Handle drivers without probe or remove callback - Remove callback now returns void - DT documentation is now in yaml New driver: - Silvaco I3C master" * tag 'i3c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw: Drop redundant disec call MAINTAINERS: Add Silvaco I3C master i3c: master: svc: Add Silvaco I3C master driver dt-bindings: i3c: Describe Silvaco master binding dt-bindings: Add vendor prefix for Silvaco dt-bindings: i3c: mipi-hci: Include the bus binding dt-bindings: i3c: Convert the bus description to yaml i3c: Make remove callback return void i3c: Handle drivers without probe or remove callback i3c/master/mipi-i3c-hci: Specify HAS_IOMEM dependency
| * i3c: master: dw: Drop redundant disec callMiquel Raynal2021-02-061-5/+0
| | | | | | | | | | | | | | | | | | | | | | Disabling all event calls is already handled by the core right before starting the DAA process. Do not do it again when the DAA process completes, it is redundant. Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201228105501.6104-1-miquel.raynal@bootlin.com
| * i3c: master: svc: Add Silvaco I3C master driverMiquel Raynal2021-02-063-0/+1487
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Silvaco I3C dual-role IP. The master role is supported in SDR mode only. I2C transfers have not been tested but are shared because they are very close to the I3C transfers in terms of register configuration. The IBI processing follows this logic: - When a slave advertizes an interrupt (SDA pulled low) an interrupt gets generated by the master. This time is unbounded and may be deferred. - The IRQ handler itself does not process anything: it only queues a work that will be run in non-atomic context. This is needed because short wait periods must be experienced. - The IBI job is divided in two parts: the first one is "critical" in the sense that it may not support getting interrupted. If this happens, after this first section the driver checks the master error register and depending on its content either flushes everything and errors out, or ends the processing (this second section may be interrupted). - If the critical section got interrupted, the slave will automatically respin it's IBI request when it will be allowed to. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210121101808.14654-6-miquel.raynal@bootlin.com
| * i3c: Make remove callback return voidUwe Kleine-König2021-02-021-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver core ignores the return value of struct bus_type::remove() because there is only little that can be done. To simplify the quest to make this function return void, let struct i3c_driver::remove() return void, too. This makes it obvious that returning an error code is a bad idea and future driver authors cannot get that wrong. Up to now there are no drivers with a remove callback, so there is no need to adapt drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210128091048.17006-2-u.kleine-koenig@pengutronix.de
| * i3c: Handle drivers without probe or remove callbackUwe Kleine-König2021-02-022-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A registered driver without a probe callback doesn't make sense, so refuse to register such a driver. (Otherwise i3c_device_probe() yields a NULL pointer exception.) A driver without remove is possible, e.g. when all resources are freed using devm callbacks. So guard the call to driver->remove by a check for being non-NULL. Note that the only in-tree i3c driver (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c) doesn't have a remove callback. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210128091048.17006-1-u.kleine-koenig@pengutronix.de
| * i3c/master/mipi-i3c-hci: Specify HAS_IOMEM dependencyDavid Gow2021-02-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MIPI i3c HCI driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver to be enabled under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver") Signed-off-by: David Gow <davidgow@google.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210127040636.1535722-1-davidgow@google.com
* | i3c/master/mipi-i3c-hci: Fix position of __maybe_unused in i3c_hci_of_matchNathan Chancellor2020-12-311-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clang warns: ../drivers/i3c/master/mipi-i3c-hci/core.c:780:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused of_device_id i3c_hci_of_match[] = { ^ ../include/linux/compiler_attributes.h:267:56: note: expanded from macro '__maybe_unused' #define __maybe_unused __attribute__((__unused__)) ^ ../include/linux/mod_devicetable.h:262:8: note: previous definition is here struct of_device_id { ^ 1 warning generated. 'struct of_device_id' should not be split, as it is a type. Move the __maybe_unused attribute after the static and const qualifiers so that there are no warnings about this variable, period. Fixes: 95393f3e07ab ("i3c/master/mipi-i3c-hci: quiet maybe-unused variable warning") Link: https://github.com/ClangBuiltLinux/linux/issues/1221 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201222025931.3043480-1-natechancellor@gmail.com
* i3c/master/mipi-i3c-hci: quiet maybe-unused variable warningNicolas Pitre2020-12-171-1/+1
| | | | | | | | If CONFIG_OF is disabled then the matching table is notreferenced. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
* i3c/master: Fix uninitialized variable next_addrColin Ian King2020-11-251-1/+1
| | | | | | | | | | | | | | The variable next_addr is not initialized and is being used in a call to i3c_master_get_free_addr as a starting point to find the next address. Fix this by initializing next_addr to 0 to avoid an uninitialized garbage starting address from being used. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20201124123504.396249-1-colin.king@canonical.com
* i3c/master: introduce the mipi-i3c-hci driverNicolas Pitre2020-11-2318-0/+4264
| | | | | | | | | | | | | | | | | | | | | This adds basic support for hardware implementing the MIPI I3C HCI specification. This driver is currently limited by the capabilities of the I3C subsystem, meaning things like scheduled commands, auto-commands and NCM mode are not yet supported. This supports version 1.0 of the MIPI I3C HCI spec, as well as the imminent release of version 1.1. Support for draft version 2.0 of the spec is also largely included with the caveat that future adjustments to this code are likely as the spec is still a work in progress. This is also lightly tested as actual hardware is still very scarce, even for HCI v1.0. Hence the EXPERIMENTAL tag. Further contributions to this driver are expected once vendor implementations and new I3C devices become available. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20201111220510.3622216-3-nico@fluxnic.net
* i3c master: fix missing destroy_workqueue() on error in i3c_master_registerQinglang Miao2020-11-231-1/+4
| | | | | | | | | Add the missing destroy_workqueue() before return from i3c_master_register in the error handling case. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20201028091543.136167-1-miaoqinglang@huawei.com
* Merge tag 'i3c/for-5.10' of ↵Linus Torvalds2020-10-172-54/+94
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: - Fix DAA for the pre-reserved address case - Fix an error path in the cadence driver * tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: Fix error return in cdns_i3c_master_probe() i3c: master: fix for SETDASA and DAA process i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
| * i3c: master: Fix error return in cdns_i3c_master_probe()Jing Xiangfeng2020-10-071-1/+3
| | | | | | | | | | | | | | | | | | | | Fix to return negative error code -ENOMEM from the error handling case instead of 0. Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20200911033350.23904-1-jingxiangfeng@huawei.com
| * i3c: master: fix for SETDASA and DAA processParshuram Thombare2020-09-141-51/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix following issue. Controller slots blocked for devices with static_addr but no init_dyn_addr may limit the number of I3C devices on the bus which gets dynamic address in DAA. So instead of attaching all the devices with static_addr, now we only attach the devices which successfully complete SETDASA. For remaining devices with init_dyn_addr, i3c_master_add_i3c_dev_locked() will try to set requested dynamic address after DAA. Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/1598337109-14770-1-git-send-email-pthombar@cadence.com
| * i3c: master add i3c_master_attach_boardinfo to preserve boardinfoParshuram Thombare2020-08-191-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | Boardinfo was lost if I3C object for devices with boardinfo available are not created or not added to the I3C device list because of some failure e.g. SETDASA failed, retrieve info failed etc This patch adds i3c_master_attach_boardinfo which scan boardinfo list in the master object and 'attach' it to the I3C device object. Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/1590053542-389-1-git-send-email-pthombar@cadence.com
* | treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-241-1/+1
|/ | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* i3c master: GETMRL's 3rd byte is optional even with BCR_IBI_PAYLOADNicolas Pitre2020-04-161-8/+8
| | | | | | | | | | | | According to the I3C spec v1.1 document, GETMRL's payload is 2 bytes, with an optional 3rd byte if the IBI private payload is larger than 1 byte. The whole GETMRL may also be optional so max_ibi_len already defaults to 1 if BCR_IBI_PAYLOAD prior to the i3c_master_getmrl_locked() call. Signed-off-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/nycvar.YSQ.7.76.2004151623060.2671@knanqh.ubzr
* i3c: convert to use i2c_new_client_device()Wolfram Sang2020-03-291-1/+1
| | | | | | | | Move away from the deprecated API. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20200326211002.13241-2-wsa+renesas@sang-engineering.com
* i3c: master: Replace zero-length array with flexible-array memberGustavo A. R. Silva2020-02-282-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/20200227131307.GA24935@embeddedor
* i3c: Simplify i3c_device_match_id()Boris Brezillon2020-02-281-28/+22
| | | | | | | | | Simply match against ->match_flags instead of trying to be smart and fix drivers inconsistent ID tables. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> Link: https://lore.kernel.org/linux-i3c/8c5d6523e1c161783db834a3447954f7fd6267e6.1582796652.git.vitor.soares@synopsys.com
* i3c: Add a modalias sysfs attributeBoris Brezillon2020-02-281-0/+22
| | | | | | | | Create a modalias sysfs attribute for i3c devices. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> Link: https://lore.kernel.org/linux-i3c/a90f64f830128cd12762153de7828b775574c156.1582796652.git.vitor.soares@synopsys.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 15:37:54 +0100