summaryrefslogtreecommitdiffstats
path: root/drivers/i3c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* i3c: master: svc: add NACK check after start byte sentClark Wang2023-06-051-0/+6
| | | | | | | | | | | Add NACK check after start byte is sent. It is possible to detect early that a device is not on the bus and avoid invalid transmissions thereafter. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-3-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: svc: fix cpu schedule in spin lockClark Wang2023-06-051-9/+10
| | | | | | | | | | | | | pm_runtime_resume_and_get() may call sleep(). It cannot be used in svc_i3c_master_start_xfer_locked(), because it is in a spin lock. Move the pm runtime operations to svc_i3c_master_enqueue_xfer(). Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Fixes: 05be23ef78f7 ("i3c: master: svc: add runtime pm support") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-2-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: svc: fix i3c suspend/resume issueClark Wang2023-06-051-0/+26
| | | | | | | | | | | | | | When system suspends, if i3c module is powered down, register value will lose. Need to save the key registers before system suspend. So save these registers value in runtime pm suspend, and restore them if these register's value is different with the saved values when runtime pm resume. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-1-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to staticTom Rix2023-04-301-1/+1
| | | | | | | | | | | | | smatch reports drivers/i3c/master/ast2600-i3c-master.c:121:34: warning: symbol 'ast2600_i3c_ops' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230429134601.2688558-1-trix@redhat.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: ast2600: fix register setting for 545 ohm pullupsJeremy Kerr2023-04-281-2/+2
| | | | | | | | | | The 2k register setting is zero, OR-ing it in doesn't parallel the 2k and 750 ohm pullups. We need a separate value for the 545 ohm setting. Reported-by: Lukwinski Zbigniew <zbigniew.lukwinski@linux.intel.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230428001849.1775559-1-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: ast2600: enable IBI supportJeremy Kerr2023-04-281-0/+21
| | | | | | | | | | | | | | | | The ast2600 i3c hardware is capable of IBIs, but we need a workaround for a hardware issue with the I3C state machine handling IBI payloads of specific lengths when PEC is not enabled. To avoid this, we need to unconditionally enable PECs, at the consquence of losing a byte of data when the device does not send a PEC. Enable IBIs on the ast2600 platform, including an implementation of the PEC workaround, which prints a warning when triggered. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/ba923b96d6d129024c975e8a0472c5b2fcb3af32.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Add a platform facility for IBI PEC workaroundsJeremy Kerr2023-04-282-0/+29
| | | | | | | | | | | | | | On the AST2600 i3c controller, we'll need to apply a workaround for a hardware issue with IBI payloads. Introduce a platform hook to allow dw i3c platform implementations to modify the DAT entry in IBI enable/disable to allow this workaround in a future change. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/d5d76a8d2336d2a71886537f42e71d51db184df6.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Add support for in-band interruptsJeremy Kerr2023-04-282-3/+289
| | | | | | | | | | | | | This change adds support for receiving and dequeueing i3c IBIs. By setting struct dw_i3c_master->ibi_capable before probe, a platform implementation can select the IBI-enabled version of the i3c_master_ops, enabling the global IBI infrastrcture for that controller. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/79daeefd7ccb7c935d0c159149df21a6c9a73ffa.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Turn DAT array entry into a structJeremy Kerr2023-04-282-12/+21
| | | | | | | | | | | | | In an upcoming change, we will want to store additional data about the devices we have in the data address table. Change the type of the DAT entries into a struct, which currently just has the address data. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/9dc0d9e2857e851a0cf04819df48e5d31921f83e.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Create a generic fifo read functionJeremy Kerr2023-04-281-4/+10
| | | | | | | | | | | In a future change we'll want to read from the IBI FIFO too, so turn dw_i3c_read_rx_fifo() into a generic read with the FIFO register as a parameter. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/827204789583dd86addffb47ecaeab9d67cf95d5.1680161823.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: Allow OF-alias-based persistent bus numberingJeremy Kerr2023-04-281-5/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parse the /aliases node to assign any fixed bus numbers, as is done with the i2c subsystem. Numbering for non-aliased busses will start after the highest fixed bus number. This allows an alias node such as: aliases { i3c0 = &bus_a, i3c4 = &bus_b, }; to set the numbering for a set of i3c controllers: /* fixed-numbered bus, assigned "i3c-0" */ bus_a: i3c-master { }; /* another fixed-numbered bus, assigned "i3c-4" */ bus_b: i3c-master { }; /* dynamic-numbered bus, likely assigned "i3c-5" */ bus_c: i3c-master { }; If no i3c device aliases are present, the numbering will stay as-is, starting from 0. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20230405094149.1513209-1-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: ast2600: Add AST2600 platform-specific driverJeremy Kerr2023-04-283-0/+183
| | | | | | | | | | | | | | | | | | | | Now that we have platform-specific infrastructure for the dw i3c driver, add platform support for the ASPEED AST2600 SoC. The AST2600 has a small set of "i3c global" registers, providing platform-level i3c configuration outside of the i3c core. For the ast2600, we need a couple of extra setup operations: - on probe: find the i3c global register set and parse the SDA pullup resistor values - on init: set the pullups accordingly, and set the i3c instance IDs Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230331091501.3800299-4-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Add infrastructure for platform-specific implementationsJeremy Kerr2023-04-282-34/+97
| | | | | | | | | | | | | | | | | | | | | | | The dw i3c core can be integrated into various SoC devices. Platforms that use this core may need a little configuration that is specific to that platform. Add some infrastructure to allow platform-specific behaviour: common probe/remove functions, a set of platform hook operations, and a pointer for platform-specific data in struct dw_i3c_master. Move the common api into a new (i3c local) header file. Platforms will provide their own struct platform_driver, which allocates struct dw_i3c_master, does any platform-specific probe behaviour, and calls into the common probe. A future change will add new platform support that uses this infrastructure. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230331091501.3800299-2-jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: use bus mode rather than device reg for conditional tCAS settingJeremy Kerr2023-04-271-1/+5
| | | | | | | | | | | | | | | In the clock setup path, we set the hardware DEV_CTRL_I2C_SLAVE_PRESENT bit on a shared mode bus, then read-back this bit for the conditional tCAS set. Instead, just use the bus->mode setting for the conditional test. While we're at it, add a little comment about why the conditional is there. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/92a933566f7846708a00ad7f5a16ee8e6ed32d0e.1680156630.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Return the length from a read priv_xferMatt Johnston2023-04-271-0/+7
| | | | | | | | | | | | | We currently assume that the rx_len of a read command will be as submitted, but we may have a shorter read than expected. This change populates the output i3c xfer length from the actually-read length. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/f4fff7ab18dee1f662dc7a5a4111fcd921e6792b.1680156630.git.jk@codeconstruct.com.au Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: svc: Convert to platform remove callback returning voidUwe Kleine-König2023-03-211-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230318233311.265186-6-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: mipi-i3c-hci: Convert to platform remove callback returning voidUwe Kleine-König2023-03-211-4/+2
| | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318233311.265186-5-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: cdns: Convert to platform remove callback returning voidUwe Kleine-König2023-03-211-4/+2
| | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318233311.265186-4-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: Convert to platform remove callback returning voidUwe Kleine-König2023-03-211-4/+2
| | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318233311.265186-3-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: Make i3c_master_unregister() return voidUwe Kleine-König2023-03-215-18/+7
| | | | | | | | | | The function returned zero unconditionally. Switch the return type to void and simplify the callers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230318233311.265186-2-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: dw: drop of_match_ptr for ID tableKrzysztof Kozlowski2023-03-131-1/+1
| | | | | | | | | | | | | The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/i3c/master/dw-i3c-master.c:1201:34: error: ‘dw_i3c_master_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312132535.352246-1-krzysztof.kozlowski@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* Merge tag 'i3c/for-6.3' of ↵Linus Torvalds2023-03-012-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Subsystem: - transfer pid from boardinfo to device info Drivers: - dw-i3c-master: stop hardcoding initial speed" * tag 'i3c/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw: stop hardcoding initial speed i3c: transfer pid from boardinfo to device info
| * i3c: master: dw: stop hardcoding initial speedJack Chen2023-02-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bus-speed could be default(12.5MHz) or defined by users in dts. Dw-i3c-master should not hard-code the initial speed to be I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz) And because of Synopsys's I3C controller limit (hcnt/lcnt register length) and core-clk provided, there is a limit to bus speed, too. For example, when core-clk is 250 MHz, the bus speed cannot be lowered below 1MHz. Tested: tested with an i3c sensor and captured with a logic analyzer. Signed-off-by: Jack Chen <zenghuchen@google.com> Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
| * i3c: transfer pid from boardinfo to device infoJack Chen2023-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I3C device PID could be defined in device tree and stored in i3c_dev_boardinfo. It should be passed to i3c_device_info when allocating a i3c_dev_desc. Rational behind this change is: when users decide to use SETDASA to assign a dynamic address with exactly the original static address, in step of i3c_master_reattach_i3c_dev, this address is checked to be taken. Then device information retrieving step is skipped. As a result, though the i3c device is registered correctly, its device driver could not be probed. Tested: Tested with a I3C device. If assigned-address is set to be the device's static address, without this change, its device driver could not probed. And with this change, its driver is probed successfully. Signed-off-by: Jack Chen <zenghuchen@google.com> Link: https://lore.kernel.org/r/20230105212952.56321-1-zenghuchen@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* | driver core: make struct device_type.uevent() take a const *Greg Kroah-Hartman2023-01-272-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uevent() callback in struct device_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jilin Yuan <yuanjilin@cdjrlc.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: Mark Gross <markgross@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Cc: Sean Young <sean@mess.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Won Chung <wonchung@google.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for Thunderbolt Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | i3c: move dev_to_i3cdev() to use container_of_const()Greg Kroah-Hartman2023-01-271-12/+0
|/ | | | | | | | | | | | The driver core is changing to pass some pointers as const, so move dev_to_i3cdev() to use container_of_const() to handle this change. dev_to_i3cdev() now properly keeps the const-ness of the pointer passed into it, while as before it could be lost. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i3c: export SETDASA methodJack Chen2022-12-113-0/+40
| | | | | | | | | | | | | | | | | Because not all I3C drivers have the hot-join feature ready, and especially not all I3C devices support hot-join feature, exporting SETDASA method could be useful. With this function, the I3C controller could perform a DAA to I3C devices when users decide to turn these I3C devices off and on again during run-time. Tested: This change has been tested with turnning off an I3C device and turning on it again during run-time. The device driver calls SETDASA method to perform DAA to the device. And communication between I3C controller and device is set up again correctly. Signed-off-by: Jack Chen <zenghuchen@google.com> Link: https://lore.kernel.org/r/20221207205059.3848851-1-zenghuchen@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: Remove the wrong place of reattach.Billy Tsai2022-10-121-4/+0
| | | | | | | | | | | | The reattach should be used when an I3C device has its address changed. But the modified place in this patch doesn't have the address changed of the newdev. This wrong reattach will reserve the same address slot twice and return unexpected -EBUSY when the bus find the duplicate device with diffent dynamic address. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20220926105145.8145-2-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: Free the old_dyn_addr when reattach.Billy Tsai2022-10-121-0/+3
| | | | | | | | | | | | This patch is used to free the old_dyn_addr when the caller want to reattach the device to the different dynamic address. If the old_dyn_addr is 0 the function will treat it as no old_dyn_addr is reserved on the bus. Without the patch, when the driver reattach the i3c device after setnewda the old_dyn_addr will be permanently occupied. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20220926105145.8145-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* i3c: master: svc: fix returnvar.cocci warningGuo Zhengkui2022-05-171-2/+1
| | | | | | | | | | | | Fix the following coccicheck warning: drivers/i3c/master/svc-i3c-master.c:1600:5-8: Unneeded variable: "ret". Return "0" on line 1605. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220504164901.9622-1-guozhengkui@vivo.com
* i3c/master: simplify the return expression of i3c_hci_remove()Minghao Chi2022-05-171-6/+1
| | | | | | | | | Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220505021954.54524-1-chi.minghao@zte.com.cn
* i3c: fix uninitialized variable use in i2c setupJamie Iles2022-03-081-1/+6
| | | | | | | | | | | | | | | | | Commit 31b9887c7258 ("i3c: remove i2c board info from i2c_dev_desc") removed the boardinfo from i2c_dev_desc to decouple device enumeration from setup but did not correctly lookup the i2c_dev_desc to store the new device, instead dereferencing an uninitialized variable. Lookup the device that has already been registered by address to store the i2c client device. Fixes: 31b9887c7258 ("i3c: remove i2c board info from i2c_dev_desc") Reported-by: kernel test robot <lkp@intel.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220308134226.1042367-1-quic_jiles@quicinc.com
* i3c: support dynamically added i2c devicesJamie Iles2022-03-041-1/+127
| | | | | | | | | | | | | | | | I2C devices can be added to the system dynamically through several sources other than static board info including device tree overlays and sysfs i2c new_device. Add an I2C bus notifier to attach the clients at runtime if they were not defined in the board info. For DT devices find the LVR in the reg property, for user-space new_device additions we synthesize a conservative setting of no spike filters and fast mode only. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220117174816.1963463-3-quic_jiles@quicinc.com
* i3c: remove i2c board info from i2c_dev_descJamie Iles2022-03-041-8/+10
| | | | | | | | | | | | I2C board info is only required during adapter setup so there is no requirement to keeping a pointer to it once running. To support dynamic device addition we can't rely on board info - user-space creation through sysfs won't have a boardinfo. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220117174816.1963463-2-quic_jiles@quicinc.com
* i3c: master: dw: check return of dw_i3c_master_get_free_pos()Tom Rix2022-01-131-0/+4
| | | | | | | | | | | | | | | | Clang static analysis reports this problem dw-i3c-master.c:799:9: warning: The result of the left shift is undefined because the left operand is negative COMMAND_PORT_DEV_INDEX(pos) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ pos can be negative because dw_i3c_master_get_free_pos() can return an error. So check for an error. Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220108150948.3988790-1-trix@redhat.com
* i3c: master: mipi-i3c-hci: correct the config reference for endiannessLukas Bulwahn2022-01-051-1/+1
| | | | | | | | | | | | The referred config BIG_ENDIAN does not exist. The config for the endianness of the CPU architecture is called CPU_BIG_ENDIAN. Correct the config name to the existing config for the endianness. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220103094504.3602-1-lukas.bulwahn@gmail.com
* i3c: master: svc: enable the interrupt in the enable ibi functionClark Wang2022-01-051-2/+4
| | | | | | | | | | | | | If enable interrupt in the svc_i3c_master_bus_init() but do not call enable ibi in the device driver, it will cause a kernel dump in the svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus, because the data->ibi_pool is not initialized. So only enable the interrupt in svc_i3c_master_enable_ibi() function. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-9-xiaoning.wang@nxp.com
* i3c: master: svc: add the missing module device tableClark Wang2022-01-051-0/+1
| | | | | | | | | | | | The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot be auto probed when it is built in moudle. So add it. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-8-xiaoning.wang@nxp.com
* i3c: master: svc: add runtime pm supportClark Wang2022-01-051-40/+156
| | | | | | | | | | Add runtime pm support to dynamically manage the clock. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-7-xiaoning.wang@nxp.com
* i3c: master: svc: set ODSTOP to let I2C device see the STOP signalClark Wang2022-01-051-2/+5
| | | | | | | | | | | If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C devices cannot see the stop signal. It may cause message sending errors. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-6-xiaoning.wang@nxp.com
* i3c: master: svc: add support for slave to stop returning dataClark Wang2022-01-051-16/+40
| | | | | | | | | | | | | When i3c controller reads data from slave device, slave device can stop returning data with an ACK after any byte. Add this support for svc i3c controller. Otherwise, it will timeout when the slave device ends the read operation early. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-5-xiaoning.wang@nxp.com
* i3c: master: svc: separate err, fifo and disable interrupt of reset functionClark Wang2022-01-051-25/+34
| | | | | | | | | | | | Sometimes only need to reset err and fifo regs, so split the origin reset function to three functions. Put them at the top of the file, to let more functions can call them. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-4-xiaoning.wang@nxp.com
* i3c: master: svc: fix atomic issueClark Wang2022-01-051-11/+15
| | | | | | | | | | | | do_daa_locked() function is in a spin lock environment, use readl_poll_timeout_atomic() to replace the origin readl_poll_timeout(). Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-3-xiaoning.wang@nxp.com
* i3c: master: svc: move module reset behind clk enableClark Wang2022-01-051-2/+2
| | | | | | | | | | Reset I3C module will R/W its regs, so enable its clocks first. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-2-xiaoning.wang@nxp.com
* i3c/master/mipi-i3c-hci: Fix a potentially infinite loop in ↵Christophe JAILLET2021-12-101-3/+1
| | | | | | | | | | | | | | | | | | | | 'hci_dat_v1_get_index()' The code in 'hci_dat_v1_get_index()' really looks like a hand coded version of 'for_each_set_bit()', except that a +1 is missing when searching for the next set bit. This really looks odd and it seems that it will loop until 'dat_w0_read()' returns the expected result. So use 'for_each_set_bit()' instead. It is less verbose and should be more correct. Fixes: 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/0cdf3cb10293ead1acd271fdb8a70369c298c082.1637186628.git.christophe.jaillet@wanadoo.fr
* i3c: fix incorrect address slot lookup on 64-bitJamie Iles2021-12-101-1/+2
| | | | | | | | | | | | | | The address slot bitmap is an array of unsigned long's which are the same size as an int on 32-bit platforms but not 64-bit. Loading the bitmap into an int could result in the incorrect status being returned for a slot and slots being reported as the wrong status. Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210922165600.179394-1-quic_jiles@quicinc.com
* i3c/master/mipi-i3c-hci: Prefer kcalloc over open coded arithmeticLen Baker2021-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210912155135.7541-1-len.baker@gmx.com
* i3c/master/mipi-i3c-hci: Prefer struct_size over open coded arithmeticLen Baker2021-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210905144054.5124-1-len.baker@gmx.com
* bus: Make remove callback return voidUwe Kleine-König2021-07-211-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'i3c/for-5.14' of ↵Linus Torvalds2021-07-101-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: - two small fixes to the svc driver * tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: svc: fix doc warning in svc-i3c-master.c i3c: master: svc: drop free_irq of devm_request_irq allocated irq
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 03:46:41 +0100