summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci (follow)
Commit message (Collapse)AuthorAgeFilesLines
* delkin_cb: add missing __init/__exit tagsBartlomiej Zolnierkiewicz2008-06-101-4/+2
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* delkin_cb: add warm-plug supportBartlomiej Zolnierkiewicz2008-06-101-4/+0
| | | | | | Don't fail the probe if there are no devices attached to the controller. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* delkin_cb: use struct ide_port_infoBartlomiej Zolnierkiewicz2008-06-101-8/+7
| | | | | | | | Convert the driver to use struct ide_port_info - as a nice side-effect this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add() call device can be already in use). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* delkin_cb: set proper hwif->gendev.parent valueBartlomiej Zolnierkiewicz2008-06-101-1/+2
| | | | | | | | | | | hwif->dev was set too late (after ide_device_add() call) so hwif->gendev.parent was not initialized properly. Fix it by setting hw.dev and letting ide_init_port_hw() do the rest. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix host drivers missing hwif->chipset initializationBartlomiej Zolnierkiewicz2008-06-101-0/+2
| | | | | | | | | | ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[] slots so all host drivers have to initialize hwif->chipset properly. This patch fixes a regression on hosts with > 1 port or with a single port but no devices attached to it for an affected host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* sis5513: add missing pci_enable_device() callBartlomiej Zolnierkiewicz2008-06-101-0/+5
| | | | | Cc: Riccardo Gori <goric@trivenet.it> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* cs5520: disable VDMABartlomiej Zolnierkiewicz2008-05-141-1/+1
| | | | | | | | | Disable Virtual DMA support for now (it causes system hangs). Thanks to TAKADA Yoshihito for the help with debugging the problem. Reported-by: TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: remove WDC_ALI15X3 config optionBartlomiej Zolnierkiewicz2008-05-141-4/+0
| | | | | | There is "wdc_udma" module parameter now. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: add "wdc_udma" module parameterBartlomiej Zolnierkiewicz2008-05-141-2/+13
| | | | | | | Add "wdc_udma" module parameter for allowing UDMA transfers on M1543C-E chipset for WDC disks. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: remove stale warning about ATI RS100 northbridgeBartlomiej Zolnierkiewicz2008-05-141-8/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: trivial cleanup for ali_set_pio_mode()Bartlomiej Zolnierkiewicz2008-05-141-15/+0
| | | | | | Remove commented out code and stale comment. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: disable init_hwif_ali15x3 for PowerPCAnton Vorontsov2008-04-291-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't need init_hwif_ali15x3() on the PowerPC systems either. Before: ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 ALI15X3: 100% native mode on irq 19 ide0: BM-DMA at 0x1120-0x1127 ide1: BM-DMA at 0x1128-0x112f hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive hda: UDMA/66 mode selected ide0: Disabled unable to get IRQ 14. ide0: failed to initialize IDE interface ide1: Disabled unable to get IRQ 15. ide1: failed to initialize IDE interface After: ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 ALI15X3: 100% native mode on irq 19 ide0: BM-DMA at 0x1120-0x1127 ide1: BM-DMA at 0x1128-0x112f hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive hda: UDMA/66 mode selected ide0 at 0x1100-0x1107,0x110a on irq 19 ide1 at 0x1110-0x1117,0x111a on irq 19 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ide0 works well, though I can't test ide1, it isn't traced out on the board. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix crash at boot with siimage driverBenjamin Herrenschmidt2008-04-291-1/+8
| | | | | | | | | | | | | Some change to the IDE layer are causing the siimage driver to crash at boot with a NULL dereference. This is due to the sil_dma_ops not containing all the necessary pointers. I suppose it used to just "override" the defaults while now, it needs to contain everything. [bart: while at it: sil_dma_ops should be const now (pointed out by Sergei)] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>, Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* siimage: coding style cleanup (take 2)Sergei Shtylyov2008-04-281-119/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix 18 errors and several warnings given by checkpatch.pl: - use of C99 // comments; - trailing whitespace; - 'switch' and 'case' not at the same indentation level; - no space before the open parenthesis of the 'if' and 'switch' statements; - space between function name and open parenthesis (though I have introduced such warnins in some places since the code looks prettier with the spaces); - including <asm/io.h> instead of <linux/io.h>; - line over 80 characters. In addition to these changes, also do the following: - make the arrays in sil_set_pio_mode() 'static', and make the arrays in sil_set_dma_mode() 'static const'; - change the string of the 'if' statements into the 'switch' statement in sil_pata_udma_filter(); - drop the needless '==' operators from the 'if' statements where a condition is a mere bit test; - remove needless initializer for the 'tmp' variable in init_chipset_siimage(); - beautify groups of the variable initializers and assignment operators; - add new line after variable definitions; - remove new line between the comment and the statements it refers to; - remove needless curly braces and parentheses; - fix typos, capitalize acronyms, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* piix: add Asus Eee 701 controller to short cable listBartlomiej Zolnierkiewicz2008-04-281-0/+1
| | | | | | Based on ata_piix patch by Dan McGee. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->dma_prdtable field from ide_hwif_tBartlomiej Zolnierkiewicz2008-04-281-2/+1
| | | | | | | | | | | | | | * Use 'hwif->dma_base + {4,8}' instead of hwif->dma_prdtable in {ide,scc}_dma_setup(). * Remove no longer needed ->dma_prdtable field from ide_hwif_t. While at it: * Use ATA_DMA_TABLE_OFS define. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->dma_vendor{1,3} fields from ide_hwif_tBartlomiej Zolnierkiewicz2008-04-281-4/+4
| | | | | | | | | | * Use 'hwif->dma_base + {1,3}' instead of hwif->dma_vendor{1,3} in pdc202xx_new host driver. * Remove no longer needed ->dma_vendor{1,3} fields from ide_hwif_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* scc_pata: add ->dma_host_set and ->dma_start methodsBartlomiej Zolnierkiewicz2008-04-281-4/+50
| | | | | | | | | | Add ->dma_host_set and ->dma_start methods (+ __scc_dma_end() helper) so scc_ide_{in,out}b() can be used directly. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->INW and ->OUTW methodsBartlomiej Zolnierkiewicz2008-04-281-16/+3
| | | | | | | | | | | * Remove no longer used ->INW and ->OUTW methods. While at it: * scc_pata.c: scc_ide_{out,in}w() is called only in scc_tf_{load,read}() so inline it there. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ns87415: add ->tf_read methodBartlomiej Zolnierkiewicz2008-04-281-0/+44
| | | | | | | | | Add ->tf_read method so out{b,w}(), in{b,w}() and superio_ide_inb() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* scc_pata: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz2008-04-281-0/+87
| | | | | | | | | Add ->tf_{load,read} methods so scc_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* siimage: remove proc_reports_siimage()Bartlomiej Zolnierkiewicz2008-04-281-25/+8
| | | | | | | | | | | | * proc_reports_siimage() is now only called by init_chipset_siimage() so inline it there. * Use array instead of switch statement for reporting clock modes. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* siimage: add sil_* I/O opsBartlomiej Zolnierkiewicz2008-04-281-159/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to merge code accessing configuration registers through PCI and MMIO together. [ because of this SATA initialization bits from setup_mmio_siimage() are moved to init_chipset_siimage() ] This also cuts code size a bit: text data bss dec hex filename 4437 164 0 4601 11f9 drivers/ide/pci/siimage.o.before 3979 164 0 4143 102f drivers/ide/pci/siimage.o.after While at it: * Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}. * Fixup CodingStyle in setup_mmio_siimage(). * Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage(). There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* siimage: do clocking register posting earlier in setup_mmio_siimage()Bartlomiej Zolnierkiewicz2008-04-281-3/+3
| | | | | | | | | | | Do clocking register posting earlier in setup_mmio_siimage() to match code in init_chipset_siimage(). This is a preparation for the next patch which merges PCI and MMIO code paths together. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->INS{W,L} and ->OUTS{W,L} methodsBartlomiej Zolnierkiewicz2008-04-281-4/+0
| | | | | | | | | | | | | * Use ins{w,l}()/outs{w,l}() and __ide_mm_ins{w,l}()/__ide_mm_outs{w,l}() directly in ata_{in,out}put_data() (by using IDE_HFLAG_MMIO host flag to decide which I/O ops are required). * Remove no longer needed ->INS{W,L} and ->OUTS{W,L} methods (ide-h8300, au1xxx-ide and scc_pata implement their own ->{in,out}put_data methods). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_MMIO host flag (take 2)Bartlomiej Zolnierkiewicz2008-04-282-0/+2
| | | | | | | | | | | | | | | | | * Add IDE_HFLAG_MMIO host flag and set it for hosts which use default_hwif_mmiops(). v2: * Fix kernel panic in pmac host driver (',' should be '|'). Thanks to Kamalesh for reporting it + testing the fix and to Andrew for hinting me about the source of the issue. Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* scc_pata: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz2008-04-281-0/+35
| | | | | | | | | | | | | | | v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument (thanks to Stephen Rothwell for catching it). There should be no functional changes caused by this patch. Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove /proc/ide/aliAlexey Dobriyan2008-04-271-240/+0
| | | | | | | | | Bart says: "can be done from user-space and is not especially interesting even when debugging problems (raw PCI config space dump is far more useful)." Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add struct ide_io_ports (take 3)Bartlomiej Zolnierkiewicz2008-04-278-45/+42
| | | | | | | | | | | | | | | | | | | | | * Add struct ide_io_ports and use it instead of `unsigned long io_ports[]` in ide_hwif_t. * Rename io_ports[] in hw_regs_t to io_ports_array[]. * Use un-named union for 'unsigned long io_ports_array[]' and 'struct ide_io_ports io_ports' in hw_regs_t. * Remove IDE_*_OFFSET defines. v2: * scc_pata.c build fix from Stephen Rothwell. v3: * Fix ctl_adrr typo in Sparc-specific part of ns87415.c. (Noticed by Andrew Morton) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2)Bartlomiej Zolnierkiewicz2008-04-272-4/+2
| | | | | | | | | | | | | | | | | * Make ide_unregister() take 'ide_hwif_t *hwif' instead of 'unsigned int index' (hwif->index) as an argument and update all users accordingly. While at it: * Remove unnecessary checks for hwif != NULL from ide-pnp.c::idepnp_remove() and delkin_cb.c::delkin_cb_remove(). * Remove needless hwif->chipset assignment from scc_pata.c::scc_remove(). v2: * Fixup ide_unregister() documentation. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: sanitize ide_unregister() usageBartlomiej Zolnierkiewicz2008-04-271-5/+1
| | | | | | | | | | | * Remove ide_unregister() call from ide_exit() (host drivers take care of unregistering hwif-s themselves). * Remove ide_unregister() call from probe methods of bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers (ide_find_port() returns only free ide_hwifs[] entries). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove IDE_HFLAG_NO_AUTOTUNE host flagBartlomiej Zolnierkiewicz2008-04-271-1/+0
| | | | | | | | | | | | | * Don't set IDE_HFLAG_NO_AUTOTUNE host flag in sgiioc4 and icside host drivers - there is no need for it as they don't implement ->set_pio_mode method. * Remove no longer needed IDE_HFLAG_NO_AUTOTUNE host flag. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* cmd640: always auto-tune PIOBartlomiej Zolnierkiewicz2008-04-271-55/+12
| | | | | | | | | | | * Default to tuning PIO0 and disabling prefetch prior to probing devices for CONFIG_BLK_DEV_CMD640_ENHANCED=y case. * Always auto-tune PIO. * Remove no longer used retrieve_drive_counts(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: mark "idebus=" kernel parameter as obsoleted (take 2)Bartlomiej Zolnierkiewicz2008-04-272-4/+1
| | | | | | | We have "vlb|pci_clock=" parameters now. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add "vlb|pci_clock=" parameterBartlomiej Zolnierkiewicz2008-04-278-10/+17
| | | | | | | | | | | | | | * Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz). * Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz). While at it: * qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove obsoleted "idex=" kernel parametersBartlomiej Zolnierkiewicz2008-04-271-4/+1
| | | | | | | | | * Remove obsoleted "idex=" kernel parameters. * Make probe_* and cmd640_vlb variables static. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: constify struct ide_dma_opsBartlomiej Zolnierkiewicz2008-04-2612-18/+108
| | | | | | | | | | | | | | | | | * Export ide_dma_exec_cmd() and __ide_dma_test_irq(). * Constify struct ide_dma_ops. * Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma() (it is later overriden by ide_init_port() if needed) and drop 'const struct ide_port_info *d' argument. While at it: * Rename __ide_dma_test_irq() to ide_dma_test_irq(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add struct ide_dma_ops (take 3)Bartlomiej Zolnierkiewicz2008-04-2614-246/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_SERIALIZE_DMA host flagBartlomiej Zolnierkiewicz2008-04-261-3/+2
| | | | | | | | | * Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports if DMA is available and handle it in ide_init_port(). * Convert sl82c105 host driver to use this new flag. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* sl82c105: check bridge revision in sl82c105_init_one()Bartlomiej Zolnierkiewicz2008-04-261-18/+17
| | | | | | | | | | | | * Make sl82c105_bridge_revision() return 'u8' instead of 'unsigned long'. * Check bridge revision in sl82c105_init_one(). While at: * Use proper KERN_ level for printk(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* sgiioc4: use ->init_dma methodBartlomiej Zolnierkiewicz2008-04-261-17/+12
| | | | | | | | | | | | | | | | | | | * Move dma_base check from sgiioc4_ide_setup_pci_device() to ide_dma_sgiioc4(). * Replace ide_dma_sgiioc4() 'unsigned long dma_base' argument by 'const struct ide_port_info *d'. * Move hwif->INB setup from ide_init_sgiioc4() to sgiioc4_ide_setup_pci_device(). * Move ide_init_sgiioc4() call from sgiioc4_ide_setup_pci_device() to ide_dma_sgiioc4(). * Convert the driver to use ->init_dma method. Cc: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: do complete DMA setup in ->init_dma method (take 2)Bartlomiej Zolnierkiewicz2008-04-262-12/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Make ide_hwif_setup_dma() return an error value. * Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase' to ->init_dma method and make it return an error value. * Rename ide_get_or_set_dma_base() to ide_pci_dma_base(), change ordering of its arguments and then export it. * Export ide_pci_set_master(). * Do complete DMA setup inside ->init_dma method and update ->init_dma users accordingly. * Sanitize code for DMA setup in ide_init_port(). v2: * Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs (from Jiri Slaby <jirislaby@gmail.com>): Fix following compiler warning by returning EINVAL: In file included from ANYTHING-INCLUDING-IDE.H:45: include/linux/ide.h: In function ‘ide_hwif_setup_dma’: include/linux/ide.h:1022: warning: no return statement in function returning non-void Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: export ide_allocate_dma_engine()Bartlomiej Zolnierkiewicz2008-04-261-7/+2
| | | | | | | Export ide_allocate_dma_engine() and use it in trm290 host driver. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_setup_dma() call out from ->init_dma methodBartlomiej Zolnierkiewicz2008-04-262-3/+0
| | | | | | | There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* alim15x3: skip DMA initialization completely on revs < 0x20Bartlomiej Zolnierkiewicz2008-04-261-2/+4
| | | | | | | | | Skip DMA initialization completely on revs < 0x20 by setting IDE_HFLAG_NO_DMA host flag and resetting DMA host masks in alim15x3_init_one() (currently ide_hwif_setup_dma() will try to obtain DMA base and setup PCI bus-mastering but init_dma_ali15x3() will fail). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* pdc202xx_old: remove init_dma_pdc202xx()Bartlomiej Zolnierkiewicz2008-04-261-16/+7
| | | | | | | Do PDC202xx specific DMA initialization in init_chipset_pdc202xx() and remove no longer needed init_dma_pdc202xx(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->cds field from ide_hwif_t (take 2)Bartlomiej Zolnierkiewicz2008-04-262-3/+3
| | | | | | | | | | | | | | | | | | | * Use hwif->name instead of cds->name in ide_allocate_dma_engine(). * Use pci_name(dev) instead of cds->name in init_dma_pdc202xx(). * Remove no longer needed ->cds field from ide_hwif_t. v2: * scc_pata.c also needs to be updated now (noticed by Stephen Rothwell). There should be no functional changes caused by this patch. Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->extra field from struct ide_port_infoBartlomiej Zolnierkiewicz2008-04-263-10/+0
| | | | | | | | | Always setup hwif->extra_base in ide_iomio_dma() and remove no longer needed ->extra field from struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-266-20/+20
| | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ [bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: cleanup setting hwif->mmio flagBartlomiej Zolnierkiewicz2008-04-263-4/+0
| | | | | | | | | | It is no longer needed to set hwif->mmio flag to tell IDE layer to not manage resources so cleanup host drivers that used hwif->mmio flag only for this purpose. Ditto for ide_legacy_init_one(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 11:58:46 +0100