summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ppc (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz2007-10-131-18/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: fix PIO setup and enable autotuneBenjamin Herrenschmidt2007-10-131-8/+12
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: use ide_tune_dma() (take 2)Bartlomiej Zolnierkiewicz2007-10-131-18/+7
| | | | | | | | | | | | | | | | | | | | | | | | * Add missing initialization of hwif->autodma and drive->autodma to pmac_ide_setup_dma(). * Use ide_tune_dma() in pmac_ide_dma_check(). While at it: * Fix pmac_ide_dma_check() return value if DMA mode is not programmed (should be "-1" otherwise ide_set_dma() will try to enable DMA). * Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if ->ide_dma_check returns "0"). v2: * No reason to blacklist all ide_floppy devices and the old code was always enabling DMA anyway (without even programming controller/device if the device was ide_floppy). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove pmac_ide_do_setfeature() (take 2)Bartlomiej Zolnierkiewicz2007-10-131-77/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove the latter, also ide-iops.c::__ide_wait_stat() could be static again. Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's ->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than the only changes in behavior are: * if PIO mode is set then ->dma_off_queitly is called to disable DMA * if setting transfer mode fails ide_dump_status() is called to dump status v2: * IDE PMAC controllers allow separate PIO and DMA timings and PPC userland depends on this fact, and calls "hdparm -p" without calling "hdparm -d". Therefore to compensate for DMA being disabled by ide_config_drive_speed() for PIO modes: - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver - add handling of the new flag to ide-io.c::do_special() Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()Bartlomiej Zolnierkiewicz2007-10-131-1/+0
| | | | | | | | | Upper layers are responsible for controlling nIEN so don't clear nIEN after command execution in pmac_ide_do_setfeature(). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: use __ide_wait_stat()Bartlomiej Zolnierkiewicz2007-10-131-4/+5
| | | | | | | | | | | | | | | | * Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature(). While at it do following changes to match __ide_wait_stat() call in ide_config_drive_speed(): * Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT. * Check DRQ_STAT bit (shouldn't be set for good device status). Also remove no longer needed wait_for_ready() from ide-iops.c. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()Bartlomiej Zolnierkiewicz2007-10-131-11/+1
| | | | | | | | | | | Don't check for good device status before executing the command in pmac_ide_do_setfeature() (ide_config_drive_speed() doesn't do this). It is a job of upper layers to guarantee that the device is ready to accept new command before we get here. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove pmac_ide_{m,u}dma_enable() (take 2)Bartlomiej Zolnierkiewicz2007-10-131-98/+4
| | | | | | | | | | | | | | | | | * Fix pmac_ide_dma_check() to use pmac_ide_tune_chipset() and remove no longer necessary pmac_ide_{m,u}dma_enable(). * While at it remove some dead code from pmac_ide_dma_check() (leftovers from conversion to use ide_max_dma_mode()). There should be no functionality changes caused by this patch. v2: * Fix compile by replacing "id" with "drive->id" in pmac_ide_dma_check() (Noticed by Ben). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: remove control register messing from pmac_ide_dma_check()Bartlomiej Zolnierkiewicz2007-10-131-1/+1
| | | | | | | | pmac_ide_do_setfeature() contains matching nIEN setting/clearing so this Device Control register messing in pmac_ide_dma_check() is totally unnecessary. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: fix set_timings_mdma()Bartlomiej Zolnierkiewicz2007-10-131-28/+12
| | | | | | | | | | | | | | | | | | * Move adjusting of cycle time for devices providing explicit DMA cycle time from pmac_ide_mdma_enable() to set_timings_mdma(). * Remove no longer needed drive_cycle_time argument. * BUG() if unsupported speed argument value is passed (shouldn't happen). * Matching access/recovery timings always exist so remove redundant check. * Make set_timings_mdma() void. * Update pmac_ide_tune_chipset()'s comment. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: pmac_ide_tune_chipset() fixesBartlomiej Zolnierkiewicz2007-10-131-11/+16
| | | | | | | | | | | | | * Don't check check for pmif == NULL (it should never be NULL if we got here). * Make a local copy of the timings and set the pmif->timings[] only after setting the transfer mode on the device (otherwise SELECT_DRIVE() call in pmac_ide_do_setfeature() will program new timings before the transfer mode is set on the device - this was pointed out by Sergei). This change makes pmac_ide_tune_chipset() behavior match this of pmac_ide_{m,u}dma_enable(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: don't check kauai_lookup_timing() return valueBartlomiej Zolnierkiewicz2007-10-131-12/+1
| | | | | | | | | | | | kauai_lookup_timing() should always return non-zero return value: * BUG() in kauai_lookup_timing() if the timing info cannot be found. * Remove code checking for zero return value from all callers. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use only ->set_pio_mode method for programming PIO modes (take 2)Bartlomiej Zolnierkiewicz2007-10-111-8/+1
| | | | | | | | | | | | | Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate() (the only place which used ->speedproc to program PIO modes) and remove handling of PIO modes from all ->speedproc implementations. v2: * Fix pmac_ide_tune_chipset() comment. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: PIO mode setup fixes (take 3)Bartlomiej Zolnierkiewicz2007-10-111-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add { 0, 0 } entry to {kauai,shasta}_pio_timings[] so kauai_lookup_timing() always returns a valid PIO timing (fixes PIO timing not being set for devices with minimum PIO cycle <= 120ns). * Add setting transfer mode on the device to pmac_ide_set_pio_mode(). * Fix pmac_ide_set_pio() to always program chipset for given PIO timing instead of only when the device we want to program PIO timing for is the currently selected one. * Now that pmac_ide_set_pio() is fixed there is no need to set transfer mode on the device and program chipset for PIO in pmac_ide_tune_chipset() (returning 0 == success is not entirely correct but is OK for now since the upper layers are only checking ->speedproc return value for DMA modes). v2: * s/speed/XFER_PIO_0 + pio/ in pmac_ide_set_pio_mode() so it actually compiles. * Removal of kauai_lookup_timing() return value checking went to separate patch. v3: * Use XFER_PIO_0 not XFER_PIO. (Noticed by Ben) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_set{_max}_pio() (take 4)Bartlomiej Zolnierkiewicz2007-10-112-22/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags and set them in ht6560, cmd640, cmd64x and sc1200 host drivers. * Add set_pio_mode_abuse() for checking if host driver has a non-standard ->tuneproc() implementation and use it in do_special(). * Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find the maximum PIO mode supported by the host), also add ide_set_max_pio() wrapper for ide_set_pio() to use for auto-tuning. Convert users of ->tuneproc to use ide_set{_max}_pio() where possible. This leaves only do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as a direct users of ->tuneproc. * Remove no longer needed ide_get_best_pio_mode() calls and printk-s reporting PIO mode selected from ->tuneproc implementations. * Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const. * Remove stale comment from ide_config_drive_speed(). v2: * Fix "ata_" prefix (Noticed by Jeff). v3: * Minor cleanups/fixups per Sergei's suggestions. v4: * Fix compile problem in drivers/ide/pci/cmd640.c (Noticed by Andrew Morton). * Improve some ->set_pio_mode comments. Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_rate_filter() calls to the upper layer (take 2)Bartlomiej Zolnierkiewicz2007-10-111-5/+1
| | | | | | | | | | | | | | | | * Move ide_rate_filter() calls from host drivers to IDE core. * Make ide_rate_filter() static. * Make 'speed' argument of ->speedproc const. v2: * Fix it8213_tune_chipset() comment. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add missing ide_rate_filter() calls to ->speedproc()-sBartlomiej Zolnierkiewicz2007-10-111-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Fix icside, cris-ide, au1xxx-ide, amd74xx, via82cxxx and pmac host drivers to use ide_rate_filter(). This results in the following modes (from user requests) being clipped down: - invalid modes (values 0x46-0xFF) [ for all hosts ] - unsupported by a host UDMA modes [ for hosts which support UDMA] - all UDMA modes and MWDMA3-4 modes [ for hosts which don't support UDMA ] - invalid modes (values 0x25-0x39) [ for hosts which don't support UDMA ] * Host driver specific changes in behavior: icside: - no change cris-ide - clip unsupported UDMA3-6 modes down - fix BUG() on trying to set unsupported UDMA3-6 modes au1xxx-ide/pmac - clip unsupported UDMA modes down amd74xx/via82cxxx - clip unsupported UDMA modes down - fix random PIO timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * While at it remove no longer needed checks from pmac.c driver. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Fix non-terminated PCI match table in PowerMac IDEBenjamin Herrenschmidt2007-10-061-0/+1
| | | | | | | | | | | | | | | | | | The PCI device table in the powermac IDE driver isn't properly terminated. Depending on how your kernel is linked and other random factors, you can end up with this driver matched against any other PCI device in your system, possibly crashing at boot. Thanks to Heikki for tracking this down with me, the bug have been there for some time, though it rarely hurts due to luck. In this case, the switch from .22 to .23-rc9 is causing it to show up due to differences in the resulting layout of .data I suppose. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <pmac@au1.ibm.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ide: remove unused variables from drivers/ide/ppc/pmac.cStephen Rothwell2007-09-171-2/+0
| | | | | | | | | | | | Removes these warnings: /home/sfr/kernels/linus/drivers/ide/ppc/pmac.c: In function 'pmac_ide_dma_check': /home/sfr/kernels/linus/drivers/ide/ppc/pmac.c:1807: warning: unused variable 'map' /home/sfr/kernels/linus/drivers/ide/ppc/pmac.c:1805: warning: unused variable 'pmif' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: paulus@samba.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* mpc8xx: Only build mpc8xx on arch/ppcKumar Gala2007-09-111-1/+0
| | | | | | | | | | Currently the mpc8xx ide driver will only work on arch/ppc so only allow it to be built there. Also, killed a minor include that isn't actually used by the driver. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: fix drive->init_speed reportingBartlomiej Zolnierkiewicz2007-08-201-11/+3
| | | | | | | | | | pmac_ide_tune_chipset() don't set drive->init_speed. Fix it by setting drive->{current,init}_speed in pmac_ide_do_setfeature() and clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add PIO masksBartlomiej Zolnierkiewicz2007-07-202-0/+3
| | | | | | | | | | | | | * Add ATA_PIO[0-6] defines to <linux/ata.h>. * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t. * Add PIO masks to host drivers. <linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: drop "PIO data" argument from ide_get_best_pio_mode()Bartlomiej Zolnierkiewicz2007-07-202-3/+2
| | | | | | | | | | * Drop no longer needed "PIO data" argument from ide_get_best_pio_mode() and convert all users accordingly. * Remove no longer needed ide_pio_data_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_pio_cycle_time() helper (take 2)Bartlomiej Zolnierkiewicz2007-07-201-7/+8
| | | | | | | | | | | | | | | | * Add ide_pio_cycle_time() helper. * Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers (previously cycle time given by the device was only used for "pio" == 255). * Remove no longer needed ide_pio_data_t.cycle_time field. v2: * Fix "ata_" prefix (Noticed by Jeff). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add short cables supportBartlomiej Zolnierkiewicz2007-07-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | This patch allows users to override both host and device side cable detection with "ideX=ata66" kernel parameter. Thanks to this it should be now possible to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable instead of 80-pin one. Next patches add automatic detection of some systems using short cables. Changes: * Rename hwif->udma_four to hwif->cbl and make it u8. * Convert all existing users accordingly (use ATA_CBL_* defines while at it). * Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three(). * Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* ide: convert ide_find_best_mode() users to use ide_max_dma_mode()Bartlomiej Zolnierkiewicz2007-07-091-21/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ide-timing.h: * remove handling of DMA modes from ide_find_best_mode() and rename it to ide_find_best_pio_mode() * drop no longer needed "map" argument from ide_find_best_pio_mode() and delete needless ->id check * remove no longer needed XFER_SWDMA and XFER_UDMA* defines au1xxx-ide.c: * use ide_max_dma_mode() instead of ide_find_best_mode() * remove needless CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA #ifdef amd74xx.c: * store UDMA masks in amd_ide_chip[] and while at it make "base" field to be u8 instead of unsigned long * convert the driver to use UDMA masks from amd_ide_chip[] * use ide_max_dma_mode() and ide_find_best_pio_mode() instead of ide_find_best_mode() * delete stale comment from amd74xx_ide_dma_check() * remove no longer needed AMD_UDMA* defines via82cxxx.c: * remove unused DISPLAY_VIA_TIMINGS define * store UDMA masks in via_isa_bridges[] and while at it make "flags" field to be u8 instead of u16 * convert the driver to use UDMA masks from via_isa_bridges[] * use ide_max_dma_mode() and ide_find_best_pio_mode() instead of ide_find_best_mode() * remove no longer needed VIA_UDMA* defines pmac.c: * use ide_max_dma_mode() instead of ide_find_best_mode() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* ide: make void and rename ide_dma_timeout() methodSergei Shtylyov2007-07-091-1/+1
| | | | | | | | | | | | | | | Since ide_dma_timeout() method's result is discarded, make it return 'void'. While at it, drop 'ide_' from the method's name, drop the '__' prefix from the default method's name, and do some cleanups in this method driver-wise: - in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use 'hwif' variable; - in au1xxx-ide.c, get rid of commented out printk(); - in sl82c105.c, get rid of unnecessary variables. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make void and rename ide_dma_lostirq() methodSergei Shtylyov2007-07-091-5/+4
| | | | | | | | | | | | | | | | Since ide_dma_lostirq() method's result is discarded, make it return 'void'. While at it, rename the method to dma_lost_irq(), drop the '__' prefix from the default method's name, and do some cleanups in this method driver-wise: - in aec62xx.c, rename the method in accordance with other drivers, and get rid of unnecessary variables there; - in pdc202xx_old.c, define/use 'hwif' variable; - in sgiioc4.c, rearrange the code to call the resetproc() method directly. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_proc_register_port()Bartlomiej Zolnierkiewicz2007-05-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | * create_proc_ide_interfaces() tries to add /proc entries for every probed and initialized IDE port, replace it by ide_proc_register_port() which does it only for the given port (also rename destroy_proc_ide_interface() to ide_proc_unregister_port() for consistency) * convert {create,destroy}_proc_ide_interface[s]() users to use new functions * pmac driver depended on proc_ide_create() to add /proc port entries, fix it * au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic driver (CONFIG_IDE_GENERIC=y) to add port /proc entries, fix them * there is now no need to add /proc entries for IDE ports in proc_ide_create() so don't do it * proc_ide_create() needs now to be called before drivers are probed - fix it, while at it make proc_ide_create() create /proc "ide" directory Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* [POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell2007-05-071-7/+7
| | | | | | | | | | | for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename get_property to of_get_property: driversStephen Rothwell2007-05-021-2/+2
| | | | | | | | These are all the remaining instances of get_property. Simple rename of get_property to of_get_property. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* scc_pata: dependency fixKou Ishizaki2007-03-171-858/+0
| | | | | | | | | | | | This patch fixes: * the dependency of scc_pata on BLK_DEV_IDEDMA_PCI * incorrect link to ide-core * move scc_pata from ide/ppc to ide/pci Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Al Viro <viro@ftp.linux.org.uk>, Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* scc_pata: bugfix for checking DMA IRQ statusAkira Iguchi2007-03-031-0/+27
| | | | | | | | | | | | | | On Tuesday 27 February 2007, Akira Iguchi wrote: > > But since I sent the first patch, I found a bug for checking DMA IRQ status. > (http://www.spinics.net/lists/linux-ide/msg06903.html) > Then I sent the fixed patch for libata only. So my drivers/ide patch > still has same bug and I want to fix it, too. > > The following patch fixes this bug. Please apply this patch. From: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix pmac breakageAndrew Morton2007-03-031-9/+24
| | | | | | | | | | | | | | | | | | | | Fix breakage added in the IDE devel tree. Add header, then fix drivers/ide/ppc/pmac.c: In function `pmac_ide_setup_dma': drivers/ide/ppc/pmac.c:2044: warning: assignment from incompatible pointer type drivers/ide/ppc/pmac.c: In function `pmac_ide_dma_host_on': drivers/ide/ppc/pmac.c:1989: warning: control reaches end of non-void function include/linux/pci.h: In function `pmac_ide_init': drivers/ide/ppc/pmac.c:1563: warning: ignoring return value of `pci_register_driver', declared with attribute warn_unused_result Then add some apparently-long-missing error handling. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make ide_hwif_t.ide_dma_host_on void (v2)Bartlomiej Zolnierkiewicz2007-02-171-4/+2
| | | | | | | | | | | | | | * since ide_hwif_t.ide_dma_host_on is called either when drive->using_dma == 1 or when return value is discarded make it void, also drop "ide_" prefix * make __ide_dma_host_on() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on() and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on(). [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)Bartlomiej Zolnierkiewicz2007-02-171-5/+3
| | | | | | | | | | | | | | | | * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_set_dma() helper (v2)Bartlomiej Zolnierkiewicz2007-02-171-5/+3
| | | | | | | | | | | | | | * add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly) 0 when DMA needs to be enabled (== need to call ->ide_dma_on) 1 when DMA setting shouldn't be changed * fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: disable DMA in ->ide_dma_check for "no IORDY" case (v2)Bartlomiej Zolnierkiewicz2007-02-171-4/+3
| | | | | | | | | | If DMA is unsupported ->ide_dma_check should disable DMA. v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: convert ide_hwif_t.mmio into flag (v2)Bartlomiej Zolnierkiewicz2007-02-172-2/+2
| | | | | | | | | | | | All users of ->mmio == 1 are gone so convert ->mmio into flag. Noticed by Alan Cox. v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use PIO/MMIO operations directly where possible (v2)Bartlomiej Zolnierkiewicz2007-02-171-46/+76
| | | | | | | | | | | This results in smaller/faster/simpler code and allows future optimizations. Also remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}. v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_use_fast_pio() helper (v3)Bartlomiej Zolnierkiewicz2007-02-171-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * add ide_use_fast_pio() helper for use by host drivers * add DMA capability and hwif->autodma checks to ide_use_dma() - au1xxx-ide/it8213/it821x drivers didn't check for (id->capability & 1) [ for the IT8211/2 in SMART mode this check shouldn't be made but since in it821x_fixups() we set DMA bit explicitly: if(strstr(id->model, "Integrated Technology Express")) { /* In raid mode the ident block is slightly buggy We need to set the bits so that the IDE layer knows LBA28. LBA48 and DMA ar valid */ id->capability |= 3; /* LBA28, DMA */ we are better off using generic helper if we can ] - ide-cris driver didn't set ->autodma [ before the patch hwif->autodma was only checked in the chipset specific hwif->ide_dma_check implementations, for ide-cris it is cris_dma_check() function so there no behavior change here ] v2: * updated patch description (thanks to Alan Cox for the feedback) v3: * updated for scc_pata driver Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: unexport ide_set_xfer_rate() (v2)Bartlomiej Zolnierkiewicz2007-02-171-4/+1
| | | | | | | | | | | | | | | In cmd64x, siimage and scc_pata drivers: * don't set drive->init_speed as it should be already set by successful execution of ide_set_xfer_rate() * use hwif->speedproc functions directly Above changes allows removal of EXPORT_SYMBOL_GPL(ide_set_xfer_rate). v2: * updated for scc_pata driver Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* drivers/ide: PATA driver for CellebKou Ishizaki2007-02-171-0/+812
| | | | | | | | | | | | | | | | | | | | | | This is the patch (based on 2.6.19-rc4) for PATA controller of Toshiba Cell reference set(Celleb). The reference set consists of Cell, 512MB memory, Super Companion Chip(SCC) and some peripherals such as HDD, GbE, etc. You can see brief explanation and picture of Cell reference set at following URLs. http://www.toshiba.co.jp/about/press/2005_09/pr2001.htm http://cell-industries.com/toshiba_announces.php We use a drivers/ide driver because its design is more suitable for SCC IDE controller than libata driver. Since SCC supports only 32bit read/write, we must override many callbacks of ata_port_operations by modifying generic helpers. Each time the libata common code is updated, we must update those modified helpers. It is very hard for us. But we will try to implement the libata driver as needed. Signed-off-by: Kou Ishizaki <kou.ishizaki at toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi at toshiba.co.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-142-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fix file specification in commentsUwe Zeisberger2006-10-031-1/+1
| | | | | | | Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* fix broken/dubious driver suspend() methodsDavid Brownell2006-09-261-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Small driver suspend() fixes in preparation for the PRETHAW events: - Only compare message events for equality against PM_EVENT_* codes; not against integers, or using greater/less-than comparisons. (PM_EVENT_* should really become a __bitwise thing.) - Explicitly test for SUSPEND events (rather than not-something-else) before suspending devices. - Removes more of the confusion between a pm_message_t (wraps event code) and a "state" ... suspend() originally took a target system state. These updates are correct and appropriate even without new PM_EVENT codes. benh: "I think in the Mesh case, we should handle the freeze case as well or we might get wild DMA." Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Greg KH <greg@kroah.com> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [POWERPC] Fix ohare IDE irq workaround on old powermacsBenjamin Herrenschmidt2006-09-221-1/+1
| | | | | | | | Looks like a workaround for old bogus OF bitrot... This fixes it and hence fixes boot on some performa machines. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] powermac: Constify & voidify get_property()Jeremy Kerr2006-07-311-3/+3
| | | | | | | | | | | | | Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-302-2/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [POWERPC] Convert powermac ide blink to new led infrastructureJohannes Berg2006-06-281-125/+0
| | | | | | | | | | | | | | This patch removes the old pmac ide led blink code and adds generic LED subsystem support for the LED. It maintains backward compatibility with the old BLK_DEV_IDE_PMAC_BLINK Kconfig option which now simply selects the new code and influences the default trigger. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 18:55:03 +0100