summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'iio-fixes-for-4.4a' of ↵Greg Kroah-Hartman2015-11-183-7/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://ra.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.4 cycle. This set does not include those for issues introduced during the merge window. Fixes of those will follow in a future series. * ad5064 - Make sure the local i2c_write returns 0 on success rather than the number of bytes transfered. Otherwise we report an error on all writes. - Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on these parts. * ad7793 - The product ID on the datasheet is wrong. Fix it in the driver. * IIO_DUMMY_EVGEN - select IRQ_WORK as a dependency. * lpc32xx - make sure clock is prepared before enabling. * si7020 - data byte order was reversed. Fix it. * vf610 - Internal temperature calculation was wrong if a different reference voltage was used. Now use a linear interpolation function to make it work over the full range. - Fix a division by zero in the case of a device tree property not being present (same issue two fixes). * xilinx XADC - VREFN scale was wrong - fix it.
| * iio: adc: xilinx: Fix VREFN scaleThomas Betker2015-11-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | The scaling factor for VREFN is 3.0/4096 (not 1.0/4096), just as for VREFP. This is not immediately obvious from the specification (Xilinx UG480), but has been confirmed by Xilinx support. Suggested-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: vf610_adc: Fix division by zero errorSanchayan Maity2015-11-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the fsl,adck-max-frequency property is not present in the device tree, a division by zero error results during the probe call on kernel boot (see below). This patch fixes it and also restores device tree compatibility in case kernels are booting with old device trees without this property specified. [ 1.063229] Division by zero in kernel. [ 1.067152] CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc5-00212-gcc88cef #37 [ 1.074650] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 1.081135] Backtrace: [ 1.083694] [<800134a4>] (dump_backtrace) from [<8001369c>] (show_stack+0x18/0x1c) [ 1.091340] r7:00000008 r6:8e0ae210 r5:00000000 r4:8e299800 [ 1.097146] [<80013684>] (show_stack) from [<80297b1c>] (dump_stack+0x24/0x28) [ 1.104483] [<80297af8>] (dump_stack) from [<80013608>] (__div0+0x1c/0x20) [ 1.111421] [<800135ec>] (__div0) from [<802968b4>] (Ldiv0+0x8/0x10) [ 1.117865] [<80424350>] (vf610_adc_probe) from [<803153b4>] (platform_drv_probe+0x4c/0xac) [ 1.126311] r10:00000000 r9:8076a5ec r8:00000000 r7:fffffdfb r6:807cc67c r5:8e0ae210 [ 1.134319] r4:807f6c54 [ 1.136915] [<80315368>] (platform_drv_probe) from [<803138bc>] (driver_probe_device+0x20c/0x2f8) [ 1.145882] r7:807cc67c r6:00000000 r5:8e0ae210 r4:807f6c54 [ 1.151657] [<803136b0>] (driver_probe_device) from [<80313a3c>] (__driver_attach+0x94/0x98) [ 1.160190] r9:8076a5ec r8:00000098 r7:00000000 r6:8e0ae244 r5:807cc67c r4:8e0ae210 [ 1.168112] [<803139a8>] (__driver_attach) from [<80311cb8>] (bus_for_each_dev+0x70/0xa4) [ 1.176383] r7:00000000 r6:803139a8 r5:807cc67c r4:00000000 [ 1.182159] [<80311c48>] (bus_for_each_dev) from [<80313318>] (driver_attach+0x24/0x28) [ 1.190260] r6:807bb568 r5:8e2a5b00 r4:807cc67c [ 1.194996] [<803132f4>] (driver_attach) from [<80312f50>] (bus_add_driver+0x1a4/0x21c) [ 1.203113] [<80312dac>] (bus_add_driver) from [<803142a8>] (driver_register+0x80/0x100) [ 1.211275] r7:8e2a7dc0 r6:807a8160 r5:80789e14 r4:807cc67c [ 1.217075] [<80314228>] (driver_register) from [<803152f8>] (__platform_driver_register+0x5c/0x64) [ 1.226216] r5:80789e14 r4:807a8160 [ 1.229877] [<8031529c>] (__platform_driver_register) from [<80789e30>] (vf610_adc_driver_init+0x1c/0x20) [ 1.239556] [<80789e14>] (vf610_adc_driver_init) from [<800095f8>] (do_one_initcall+0x94/0x1dc) [ 1.248365] [<80009564>] (do_one_initcall) from [<8076ae34>] (kernel_init_freeable+0x13c/0x1e0) [ 1.257155] r10:80794830 r9:8076a5ec r8:00000098 r7:807d5780 r6:807d5780 r5:00000006 [ 1.265153] r4:807a0ee8 [ 1.267753] [<8076acf8>] (kernel_init_freeable) from [<80590ef0>] (kernel_init+0x18/0xf0) [ 1.276021] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80590ed8 [ 1.284015] r4:807d5780 [ 1.286615] [<80590ed8>] (kernel_init) from [<8000f878>] (ret_from_fork+0x14/0x3c) [ 1.294278] r5:80590ed8 r4:00000000 Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Fugang Duan <B38611@freescale.com> Acked-by: Stefan Agner <stefan@agner.ch> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:ad7793: Fix ad7785 product IDLars-Peter Clausen2015-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | While the datasheet for the AD7785 lists 0xXB as the product ID the actual product ID is 0xX3. Fix the product ID otherwise the driver will reject the device due to non matching IDs. Fixes: e786cc26dcc5 ("staging:iio:ad7793: Implement stricter id checking") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * vf610_adc: Fix internal temperature calculationBhuvanchandra DV2015-10-251-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculate ADCR_VTEMP25 using VTEMP25 at VREFH_ADC 3V3. Existing calculations consider the typical values provided in datasheet. Those typical values are valid for VREFH_ADC at 3.0V. VTEMP25 is different for different VREFH_ADC voltages. With VREFH_ADC at 3.3V, voltage at 25°C is 0.699V. Hence update the VTEMP25 to 0.699V which gives ADCR@Temp25 as 867. Formula for finding ADCR@Temp25: ADCR@Temp25 = (ADCR@Vdd * V@TEMP25 * 10) / VDDconv ADCR@Vdd for 12-Bit ADC = 4095 VDDconv = VREFH_ADC * 10 VREFH_ADC@3.3V ADCR@Temp25 = (4095 * .699 * 10) / 33 ADCR@Temp25 ~= 867 | VREFH_ADC | V@TEMP25 | VDDconv | ADCR@Temp25 | | 3.0V | 0.696mV | 30 | 950 | | 3.3V | 0.699mV | 33 | 867 | Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'spi-v4.4' of ↵Linus Torvalds2015-11-0510-10/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
| | \
| | \
| *-. \ Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown2015-11-0410-10/+0
| |\ \ \ | | |_|/ | |/| | | | | | 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
| | | * spi: Drop owner assignment from spi_driversAndrew F. Davis2015-10-2810-10/+0
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | Merge 4.3-rc7 into staging-nextGreg Kroah-Hartman2015-10-271-0/+34
|\| | | | | | | | | | | | | | | | | We want the other staging patches in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | iio: adc: twl4030: Fix ADC[3:6] readingsAdam YH Lee2015-10-031-0/+34
| |/ | | | | | | | | | | | | | | | | | | MADC[3:6] reads incorrect values without these two following changes: - enable the 3v1 bias regulator for ADC[3:6] - configure ADC[3:6] lines as input, not as USB Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: max1363: leave sysfs naming to the coreMartin Kepplinger2015-09-301-1/+0
| | | | | | | | | | | | | | | | This shouldn't actually change anything since the core calls the events sysfs folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: ad799x: leave sysfs naming to the coreMartin Kepplinger2015-09-301-1/+0
| | | | | | | | | | | | | | | | | | This shouldn't change anything since the core calls the events folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: vf610: fix simple_return.cocci warningskbuild test robot2015-09-231-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | drivers/iio/adc/vf610_adc.c:766:1-4: WARNING: end returns can be simpified and declaration on line 755 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: twl6030-gpadc: Fix module autoload for OF platform driverLuis de Bethencourt2015-09-231-0/+1
| | | | | | | | | | | | | | | | This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: hi8435: Holt HI-8435 threshold detectorVladimir Barinov2015-09-233-0/+546
| | | | | | | | | | | | | | Add Holt threshold detector driver for HI-8435 chip Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: vf610: Add IIO buffer support for Vybrid ADCSanchayan Maity2015-08-312-7/+100
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for IIO buffer to the Vybrid ADC driver. IIO triggered buffer infrastructure along with iio sysfs trigger is used to leverage continuous sampling support provided by the ADC block. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: mcp320x: Set struct spi_driver .of_match_tableJavier Martinez Canillas2015-08-221-0/+1
| | | | | | | | | | | | | | | | | | The driver has an OF id table but the .of_match_table is not set so the SPI core can't do an OF style match and the table was unused. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc128s052: Add OF match tableJavier Martinez Canillas2015-08-221-0/+8
| | | | | | | | | | | | | | | | | | | | The Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt DT binding doc lists "ti,adc128s052" or "ti,adc122s021" as compatible strings but the corresponding driver does not have an OF match table. Add the table to the driver so the SPI core can do an OF style match. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: max1027: Set struct spi_driver .of_match_tableJavier Martinez Canillas2015-08-221-0/+1
| | | | | | | | | | | | | | | | The driver has an OF id table but the .of_match_table is not set so the SPI core can't do an OF style match and the table was unused. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: adc: xilinx-xadc: Push interrupts into hardirq contextXander Huff2015-08-162-29/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver currently registers a pair of irq handlers using request_threaded_irq(), however the synchronization mechanism between the hardirq and the threadedirq handler is a regular spinlock. Unfortunately, this breaks PREEMPT_RT builds, where a spinlock can sleep, and is thus not able to be acquired from a hardirq handler. This patch gets rid of the threaded handler and pushes all interrupt handling into the hardirq context, and uses request_irq(). To validate that this change has no impact on RT performance, here are cyclictest values with no processes running: $ sudo cyclictest -S -m -p 98 policy: fifo: loadavg: 0.00 0.01 0.05 1/174 2539 T: 0 ( 1405) P:98 I:1000 C:167010520 Min: 9 Act: 12 Avg: 12 Max: 75 T: 1 ( 1862) P:98 I:1500 C:111340339 Min: 9 Act: 12 Avg: 12 Max: 73 Then, all xadc raw handles were accessed in a continuous loop via /sys/bus/iio/devices/iio:device0: $ sudo cyclictest -S -m -p 98 policy: fifo: loadavg: 7.84 7.70 7.63 3/182 4260 T: 0 ( 2559) P:98 I:1000 C:241557018 Min: 11 Act: 18 Avg: 21 Max: 74 T: 1 ( 2560) P:98 I:1500 C:161038006 Min: 10 Act: 21 Avg: 20 Max: 73 Signed-off-by: Xander Huff <xander.huff@ni.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio:adc:cc10001_adc: resort entry in Kconfig and MakefileHartmut Knaack2015-08-122-12/+12
| | | | | | | | | | | | | | | | Move the entry for the CC 10001 ADC driver in Kconfig and Makefile up to maintain alphabetic order. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio:adc:berlin2-adc: coding style cleanupHartmut Knaack2015-08-121-29/+35
| | | | | | | | | | | | | | | | Some adjustment of indentation to make checkpatch.pl happy in strict mode. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio:adc:berlin2-adc: enable interrupts with mutex lockedHartmut Knaack2015-08-121-9/+8
| | | | | | | | | | | | | | | | | | Move the call to enable channel interrupts into its _read() function to have it protected by a mutex. This ensures that only one channel is sampled at a time. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio:adc:berlin2-adc: use GENMASK and BIT for masksHartmut Knaack2015-08-121-5/+5
|/ | | | | | | | Make use of GENMASK for consecutive bitmasks and BIT for single bitmasks. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'iio-for-4.3b-2' of ↵Greg Kroah-Hartman2015-08-124-19/+102
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and cleanup for the 4.3 cycle. Take 2 also includes a fix set that was too late for the 4.2 cycle. As we had a lot of tools and docs work in this set, I have broken those out into their own categories in this description. Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'. * Poll functions for both event chardev and the buffer one were returning negative error codes (via a positive value). * A recent change to lsiio adding some error handling that was wrong and stopped the tool working. * bmg160 was missing some dependencies in Kconfig * berlin2-adc had a misshandled register (wrote a value rather than a bitmap) New device support * TI opt3001 light sensor * TXC PA12 ALS and proximity sensor. * mcp3301 ADC support (in mcp320x driver) * ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors common support to allow different WHOAMI register addresses, devices with fixed scale and allow interrupt equiped magnetometers). * ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver) * ADIS16266 gyro (in the adis16260 driver) * ADIS16137 gyro (in the adis16136 driver) New functionality * mmc35240 DT bindings. * Inverse unit conversion macros to aid handing of values written to sysfs attributes. Core cleanup * Forward declaration of struct iio_trigger to avoid a compile warning. Driver cleanup / fixes * mxs-lradc - Clarify which parts are supported. - Fix spelling erorrs. - Missing/extra includes - reorder includes - add datasheet name listings for all usable channels (to allow them to be bound by name from consumer drivers) * acpi-als - add some function prefixes as per general iio style. * bmc150_magn - replace a magic value with the existing define. * vf610 - determine possible sample frequencies taking into account the electrical characteristics (defining a minimum sample time) * dht11 - whitespace - additional docs - avoid mulitple assignments in one line - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick previously used for timing. * Fix all drivers that consider 0 a valid IRQ for historical reasons. * Export I2C module alias info where previously missing (to allow autoprobing) * Export OF module alias info where previously missing. * mmc35240 - switch some variables into arrays to improve readability. * mlx90614 - define some magic numbers for readability. * bmc150_magn - expand area locked by a mutex to cover all the use of the data->buffer. - use descriptive naming for a mask instead of a magic value. * berin2-adc - pass up an error code rather that a generic error - constify the iio_chan_spec - some other little tidy ups. * stk8312 - fix a dependency on triggered buffers in kconfig - add a check for invalid attribute values - improve error handling by returning error codes where possible and return immediately where relevant - rework macro defs to use GENMASK etc - change some variable types to reduce unnecessary casting - clean up code style - drop a local buffer copy for bulk reads and use the one in data->buffer instead. * adis16400 - the adis16448 gyroscope scale was wrong. * adis16480 - some more wrong scales for various parts. * adis16300 - has an undocumented product id and serial number registers so use them. * iio_simple_dummy - fix some wrong code indentation. * bmc150-accel - use the chip ID to detect the chip present rather than verifying the expected part was there. This was in response to a wrong ACPI entry on the WinBook TW100. * mma8452 - fix _get_hp_filter_index - drop a double include - pass up an error code rather than rewriting it - range check input values to attribute writes - register defs tidy up using GENMASK and reordering them to be easier to follow. - various coding style cleanups - put the Kconfig entry in the write place (alphabetically). Tools related * Tools cleanup - drop an explicity NULL comparison, some unnecessary braces, use the ARRAY_SIZE macro, send error messages to stderr instead of dropping them in the middle of normal output. * Fix tools to allow that scale and offset attributes are optional. * More tools fixes including allowing true 32bit data (previously an overflow prevented more than 31bits) * Drop a stray header guard that ended up in a c file. * Make calc_digits static as it isn't exported or in the header. * Set ci_array pointer to NULL after free as a protection against non safe usage of the tools core code. Also convert a double pointer to a single one as the extra level of indirection was unnecessary. Docs * DocBook introduction by Daniel Baluta. Glad we are beginning to draw together some more introductory docs to suplement the various tools / examples. * Drop bytes_per_datum sysfs attribute docs as it no longer exists. * A whole load of missing / fixing of kernel-doc for the core of IIO. * Document the trigger name sysfs attribute in the ABI docs. * Minor typos in the ABI docs related to power down modes.
| * iio:adc:berlin2-adc: Fix register definitionHartmut Knaack2015-08-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Active channel number is stored in BERLIN2_SM_CTRL as value, instead of a bit map. The masks for channel interrupts and data ready are a 16 bits wide bit map each, instead of just 4 bits. Also correct the data mask for the temperature sensor, which was Reported-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:adc:berlin2-adc: use channel-array size directlyHartmut Knaack2015-08-021-2/+1
| | | | | | | | | | | | | | | | | | Drop the otherwise unused definition of the channel-array size and use it directly in _probe - makes it a bit more obvious. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:adc:berlin2-adc: use short operator formatHartmut Knaack2015-08-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use augmented assignment to subtract the offset for negative temperature values. Specify the amount of private data to be allocated through devm_iio_device_alloc() with sizeof(*priv), as it is shorter and common practice in IIO. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:adc:berlin2-adc: constify iio_chan_specHartmut Knaack2015-08-021-1/+1
| | | | | | | | | | | | | | | | Mark berlin2_adc_channels array as constant. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio:adc:berlin2-adc: pass up real error codeHartmut Knaack2015-08-021-2/+2
| | | | | | | | | | | | | | | | Pass up the real error code returned by platform_get_irq_byname(). Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: vf610: Determine sampling frequencies by using minimum sample timeSanchayan Maity2015-07-201-4/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver currently does not take into account the minimum sample time as per the Figure 6-8 Chapter 9.1.1 12-bit ADC electrical characteristics. We set a static amount of cycles instead of considering the sample time as a given value, which depends on hardware characteristics. Determine sampling frequencies by first reading the device tree property node and then calculating the required Long Sample Time Adder (LSTAdder) value, based on the ADC clock frequency and sample time value obtained from the device tree. This LSTAdder value is then used for calculating the sampling frequencies possible. In case the sample time property is not specified through the device tree, a safe default value of 1000ns is assumed. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: adc: mcp320x: Add support for mcp3301Andrea Galbusera2015-07-202-3/+17
| | | | | | | | | | | | | | This adds support for Microchip's 13 bit 1 channel AD converter MCP3301 Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge 4.2-rc4 into staging-nextGreg Kroah-Hartman2015-07-272-1/+3
|\ \ | | | | | | | | | | | | | | | We want the iio and other fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | iio: mcp320x: Fix NULL pointer dereferenceManfred Schlaegl2015-07-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On reading in_voltage_scale of we got an NULL pointer dereference Oops. The reason for this is, that mcp320x_read_raw tries to access chip_info->resolution from struct mcp320x, but chip_info is never set. chip_info was never set since the driver was added, but there was no acute problem, because it was not referenced. The acute problem exists since b12206e917ac34bec41b9ff93d37d8bd53a2b3bc iio: adc: mcp320x. Add support for more ADCs This patch fixes the issue by setting chip_info in mcp320x_probe. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Reviewed-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: vf610: fix the adc register read fail issueFugang Duan2015-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Read the register only when the adc register address is 4 byte aligned. (rather than the other way around). Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Cc: <Stable.vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio:adc:cc10001_adc: fix Kconfig dependencyHartmut Knaack2015-07-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Cosmic Circuits 10001 ADC driver depends on HAS_IOMEM, HAVE_CLK and REGULATOR together, not just any of these. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: at91_adc: allow to use full range of startup timeJan Leupold2015-07-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond value. When trying to increase the value of STARTUP in Register AT91_ADC_MR some higher values can't be reached. Change the type in function parameter and private structure field from u8 to u32. Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de> [nicolas.ferre@atmel.com: change commit message, increase u16 to u32 for startup time] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: twl4030-madc: Pass the IRQF_ONESHOT flagFabio Estevam2015-07-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * | iio: adc: rockchip_saradc: add missing MODULE_* dataHeiko Stuebner2015-07-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The module-data is currently missing. This includes the license-information which makes the driver taint the kernel and miss symbols when compiled as module. Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | Merge 4.2-rc3 into staging-nextGreg Kroah-Hartman2015-07-204-7/+11
|\ \ \ | |_|/ |/| | | | | | | | | | | We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Merge tag 'iio-fixes-for-4.2a' of ↵Greg Kroah-Hartman2015-07-134-7/+11
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.2 cycle. * Fix a regression in hid sensors suspend time as a result of adding runtime pm. The normal flow of waking up devices in order to go into suspend (given the devices are normally suspended when not reading) to a regression in suspend time on some laptops (reports of an additional 8 seconds). Fix this by checking to see if a user action resulting in the wake up, and make it a null operation if it didn't. Note that for hid sensors, there is nothing useful to be done when moving into a full suspend from a runtime suspend so they might as well be left alone. * rochip_saradc: fix some missing MODULE_* data including the licence so that the driver does not taint the kernel incorrectly and can build as a module. * twl4030 - mark irq as oneshot as it always should have been. * inv-mpu - write formats for attributes not specified, leading to miss interpretation of the gyro scale channel when written. * Proximity ABI clarification. This had snuck through as a mess. Some drivers thought proximity went in one direction, some the other. We went with the most common option, documented it and fixed up the drivers going the other way. Fix for sx9500 included in this set. * ad624r - fix a wrong shift in the output data. * at91_adc - remove a false limit on the value of the STARTUP register applied by too small a type for the device tree parameter. * cm3323 - clear the bits when setting the integration time (otherwise we can only ever set more bits in the relevant field). * bmc150-accel - multiple triggers are registered, but on error were not being unwound in the opposite order leading to removal of triggers that had not yet successfully been registered (count down instead of up when unwinding). * tcs3414 - ensure right part of val / val2 pair read so that the integration time is not always 0. * cc10001_adc - bug in kconfig dependency. Use of OR when AND was intended.
| | * iio:adc:cc10001_adc: fix Kconfig dependencyHartmut Knaack2015-06-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Cosmic Circuits 10001 ADC driver depends on HAS_IOMEM, HAVE_CLK and REGULATOR together, not just any of these. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: at91_adc: allow to use full range of startup timeJan Leupold2015-06-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond value. When trying to increase the value of STARTUP in Register AT91_ADC_MR some higher values can't be reached. Change the type in function parameter and private structure field from u8 to u32. Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de> [nicolas.ferre@atmel.com: change commit message, increase u16 to u32 for startup time] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: twl4030-madc: Pass the IRQF_ONESHOT flagFabio Estevam2015-06-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * iio: adc: rockchip_saradc: add missing MODULE_* dataHeiko Stuebner2015-06-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The module-data is currently missing. This includes the license-information which makes the driver taint the kernel and miss symbols when compiled as module. Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: Drop owner assignment from i2c_driverKrzysztof Kozlowski2015-07-112-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio:adc:Kconfig: rework help descriptionsHartmut Knaack2015-06-281-10/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework the help text of several ADCs to make sure that: - the module name is mentioned, if the driver can be built as a module - "If unsure, say N" messages are dropped - right indentation is maintained Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: adc: cc10001: Power-up the ADC at probe time when used remotelyNaidu Tellapati2015-06-141-5/+21
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ADC is typically shared with remote CPUs not running Linux. However, there is only one register to power-up/power-down. Remote CPUs aren't able to power-up the ADC, and rely in Linux doing it instead. This commit uses the adc-reserved-channels devicetree property to distinguish shared usage. In this case, the ADC is powered up at probe time. If the ADC is used only by the CPU running Linux, power-up/down at runtime, only when neeeded. Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'iio-for-v4.2c' of ↵Greg Kroah-Hartman2015-06-112-47/+107
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle. Given Linus announced a 4.8rc coming up, hopefully time for one more lot of IIO patches this cycle. Some of these are actually improvements / fixes for patches earlier in the cycle. New device support * st_accel driver - support devices with 8 bit channels. Cleanup * A general cleanup of the iio tools under /tools/ from Hartmut. I'm more than a little embarassed by how bad some of these were! Are well, much more refined and less bug prone now. These cover lots of stuff like unhandled error returns, memory leaks as well as general refactoring to tidy the code up. * iio_simple_dummy - fix memory leaks in the init functions, drop some pointless error returns from functions that never generate errors and make the module parameter explicitly unsigned. * More buffer handling reworks from Lars-Peter, this time targetting hardware buffers (a little used corner that looks likely to get more use in the near future). Specifically: - Always compute the masklength as inkernel buffer users may need it. - Add a means of labeling which buffer modes a given buffer implementation supports. - In the case of hardware buffers, require strict scan matching rather than matching to a superset. Currently the demux is bypassed by these drivers (this may well not change for efficiency reasons) so allowing a superset of channels to be selected would otherwise lead to more data than requested confusing userspace. Driver funcationality improvments * mmc35240 - adds a compensation to the raw values as borrowed form Memsic's own input driver. * mma8452 - event support - event debouncing - high pass filter configuration - triggers * vf610 - allow conversion mode to be adjusted Fixlets * mmc35240 - Off by one error that by coincidence had no real effect. - i2c_device_name should be lowercase. - Lack of null terminator at end of attributes array. - Avoid computing the fractional part of the magnetic field by moving the scaling into userspace where floating point is available to simplify the maths. - Use a smaller sleep before assuming the measurement is done. This is safe and improves the possible polling rate. - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd code and the value used in the code seems to be correct. * stk3310 - make a local variable signed to ensure error handling works. * twl4030 - fix calculation of the temperature sense current - bug unlikely to have ever been noticed as the difference is small. - Fix errors in descriptions.
| * | iio: adc: vf610: implement configurable conversion modesStefan Agner2015-06-071-42/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support configurable conversion mode through sysfs. So far, the mode used was low-power, which is enabled by default now. Beside that, the modes normal and high-speed are selectable as well. Use the new device tree property which specifies the maximum ADC conversion clock frequencies. Depending on the mode used, the available resulting conversion frequency are calculated dynamically. Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 12:30:01 +0100