summaryrefslogtreecommitdiffstats
path: root/drivers/iio/gyro (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iio: gyro: bmg160: fix buffer read valuesIrina Tirdea2016-04-031-1/+1
| | | | | | | | | | | | | | When reading gyroscope axes using iio buffers, the values returned are always 0. In the interrupt handler, the return value of the read operation is returned to the user instead of the value read. Return the value read to the user. This is also fixed in commit 82d8e5da1a33 ("iio: accel: bmg160: optimize transfers in trigger handler"). Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: gyro: bmg160: fix endianness when reading axesIrina Tirdea2016-04-031-3/+4
| | | | | | | | | | | | | | | | | | | | | | For big endian platforms, reading the axes will return invalid values. The device stores each axis value in a 16 bit little endian register. The driver uses regmap_read_bulk to get the axis value, resulting in a 16 bit little endian value. This needs to be converted to cpu endianness to work on big endian platforms. Fix endianness for big endian platforms by converting the values for the axes read from little endian to cpu. This is also partially fixed in commit 82d8e5da1a33 ("iio: accel: bmg160: optimize transfers in trigger handler"). Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: st_sensors: support active-low interruptsLinus Walleij2016-01-101-0/+15
| | | | | | | | | | | | | | | | | | | | | Most ST MEMS Sensors that support interrupts can also handle sending an active low interrupt, i.e. going from high to low on data ready (or other interrupt) and thus triggering on a falling edge to the interrupt controller. Set up logic to inspect the interrupt line we get for a sensor: if it is triggering on rising edge, leave everything alone, but if it triggers on falling edges, set up active low, and if unsupported configurations appear: warn with errors and reconfigure the interrupt to a rising edge, which all interrupt generating sensors support. Create a local header for st_sensors_core.h to share functions between the sensor core and the trigger setup code. Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'iio-for-4.5a' of ↵Greg Kroah-Hartman2015-12-012-11/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.5 cycle Usual mixed bag, but the big item perhaps in this series is the DMA buffer support added by Lars-Peter Clausen. It's been in the works for a long time and it will be interesting to see what hardware support shows up now that this is available. New core features + associate cleanup. * Add generic DMA buffer infrastructure * Add a DMAengine framework based buffer Also associated minor changes. - Set the device buffer watermark based on the minimum watermark for all attached buffers rather than just the 'primary' one. - iio_buffer_init - only set the watermark default if one hasn't already been provided. This allows simple support for devices with a fixed watermark. - read only attribute for watermark on fixed watermark devices. - add explicit buffer enable/disable callbacks to allow the buffer to do more than trivial actions when it is being turned on and off. * IIO_VAL_INT support in write_raw_get_fmt function. New device support * Freescale MMA7455/7456L accelerometers * Memsic MXC6255XC accelerometer * ST lis2dh12 accelerometer * TI ADS8688 ADC * TI Palamas (twl6035/7) gpadc New driver features * mma8452 - support either of the available interrupt pins to cope with the case where board layout has lead to a particular one being connected. Staging graduation * Dummy driver - this driver acts as both an example and a test device for those with out hardware to develop userspace code against. Cleanups and minor bits and bobs. * treewide - Sort out the ordering of iio_device_register/unregister vs runtime pm function calls so that it's all nice and consistent and not race prone. - Check sscanf return values. None of the cases will actually happen as the strings are supplied internally, but best to be consistent on this. * ad7780 - switch over to the gpio descriptor interface and remove the now unused platform data which gets rid of a header entirely. * ad7793 - drop a pointless else statement. * at91_adc - Swap kmalloc_array in for a kmalloc doing the same job. * dummy - get rid of some commented out lines that snuck in during the move of the driver. * lm3533-als - Print an error message on provision of an invalid resistance. * mcp320x - Add compatible strings with vendor prefix and deprecate those with no vendor prefix. * mxs-lradc - Use BIT macro in various places rather than shifted ones. * pa12203001 - Power off the chip if the registration fails. * pulsedlight-lidar-lite - add runtime PM support. * xilinx XADC - constify an iio_buffer_setup_ops structure.
| * iio: gyro: check sscanf return valueIoana Ciornei2015-11-081-1/+3
| | | | | | | | | | | | | | | | | | This patch fixes the checkpatch warnings: WARNING: unchecked sscanf return value Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: Reconcile operation order between iio_register/unregister and pm functionsAdriana Reus2015-11-081-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | At probe, runtime pm should be setup before registering the sysfs interface so that all the power attributes are accurate and functional when registering. Also, when removing the device we should unregister first to make sure that the interfaces that may result in wakeups are no longer available. Fix this behaviour for the following drivers: bmc150, bmg160, kmx61, kxcj-1013, mma9551, mma9553, rpr0521. Signed-off-by: Adriana Reus <adriana.reus@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'spi-v4.4' of ↵Linus Torvalds2015-11-056-6/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
| * spi: Drop owner assignment from spi_driversAndrew F. Davis2015-10-286-6/+0
| | | | | | | | | | | | | | | | | | An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
* | iio: bmg160: Add SPI driverMarkus Pargmann2015-08-313-1/+64
| | | | | | | | | | Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: bmg160: Separate i2c and core driverMarkus Pargmann2015-08-315-67/+108
| | | | | | | | | | | | | | | | | | | | This patch separates the core driver using regmap and the i2c driver which creates the i2c regmap. Also in the Kconfig file BMG160 and BMG160_I2C are separate now. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: st_sensors: add debugfs register read hookLinus Walleij2015-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | This adds a debugfs hook to read/write registers in the ST sensors using debugfs. Proved to be awesome help when trying to debug why IRQs do not arrive. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: bmg160: Remove remaining uses of i2c_clientMarkus Pargmann2015-08-161-30/+29
| | | | | | | | | | Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: bmg160: Use generic dev_drvdataMarkus Pargmann2015-08-161-5/+5
| | | | | | | | | | | | | | | | | | i2c_get_clientdata() is specifically for i2c. Replace it with the generic dev_get/set_drvdata() to support different protocols. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: bmg160: Remove i2c_client from data structMarkus Pargmann2015-08-161-32/+32
| | | | | | | | | | | | | | | | | | | | | | | | i2c_client variable is not really used anymore in the core driver. It is only used to get the device to make proper outputs. This patch replaces all i2c_client usage through direct usage of the device pointer. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: bmg160: Use i2c regmap instead of direct i2c accessMarkus Pargmann2015-08-162-111/+88
|/ | | | | | | | | This patch introduces regmap usage into the driver. This is done to later easily support the SPI interface of this chip. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are requiredMarkus Pargmann2015-08-121-1/+2
| | | | | | | | | | This patch adds selects for IIO_BUFFER and IIO_TRIGGERED_BUFFER. Without IIO_BUFFER, the driver does not compile. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adis16136: Add ADIS16137 supportLars-Peter Clausen2015-08-081-0/+6
| | | | | | | | The ADIS16137 is register map compatible to the ADIS16136, but has a different scale factor for the gyroscope output. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: adis16260: Add ADIS16266 supportLars-Peter Clausen2015-08-081-39/+98
| | | | | | | | | The ADIS16266 is mostly register compatible to the ADIS16260. The difference is a different gyroscope scale factor as well not having the relative angular displacement channel. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: st-sensors: add configuration for WhoAmI addressGiuseppe Barba2015-07-231-0/+3
| | | | | | | | | | | This patch permits to configure the WhoAmI register address because some device could have not a standard address for this register. Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Reviewed-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: Drop owner assignment from i2c_driverKrzysztof Kozlowski2015-07-112-2/+0
| | | | | | | | i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'iio-for-v4.2b' of ↵Greg Kroah-Hartman2015-05-242-39/+43
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle. Core functionality * i and q modifiers from quadrature channels. * IIO_CHAN_INFO_OVERSAMPLING_RATIO added. * High pass filter attributes added to mirror the existing low pass filter ones. Core cleanups * Make IIO tools building more cross compiler friendly. * Substantial rework of the function __iio_update_buffers to greatly simplify a hideously evolved function. New drivers and support * ACPI0008 ambient light sensor driver. This one has been around a long time to will be good to finally get it into mainline. * Berlin SOC ADC support. * BMC150 magnetometer. The accelerometer in the same package has been supported for quite some time, so good to have this half as well. * m62332 DAC driver * MEMSIC MMC35420 magnetometer. * ROHM BH1710 and similar ambient light sensors. * Sensortek STK3310 light sensor. * Sensortek STK8312 accelerometer. * Sensortek STK8BA50 accelerometer. * ti-adc128s052 gains support form the adc122s021 2 channel ADC. Driver cleanups and functionality. * Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled. * bmc150 - decouple trigger from buffer to allow other triggers to be used. * bmg160 - decouple trigger from buffer to allow other triggers to be used. Fix a trivial unused field. * Constify a load of platform_device_id structures. * inv_mpu6050 - device tree bindings. * hid-sensors - fix a memory leak during probe if certain errors occur. * ltr501 - illuminance channel derived (in an non obvious fashion) from the intensity channels. * ltr501 - fix a boundary check on the proximity threshold. * mlx90614 - drop a pointless return. * mma8452 - Debugfs register access and fix a bug that had no effect (by coincidence) * ti_am335x_adc - add device tree bindings for sample-delay, open-delay and averaging. The ideal settings for these tend to be board design specific.
| * iio: gyro: bmg160: decouple buffer and triggersVlad Dogaru2015-05-171-24/+32
| | | | | | | | | | | | | | | | Make it possible to use buffering with an external trigger, such as one based on sysfs or hrtimer. Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: gyro: bmg160: remove redundant fieldVlad Dogaru2015-05-171-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | Replace the 'timestamp' field in struct bmg160_data with the identically named field in iio_poll_func and with calls to iio_get_time_ns(). The reported timestamps may be slightly different, but the advantage is that we no longer assume that the buffer of bmg160 is triggered by its own trigger. Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: gyro: hid-sensor-gyro-3d: Fix memory leak in probe()Fabio Estevam2015-05-171-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | 'channels' is allocated via kmemdup and it is never freed in the subsequent error paths. Use 'indio_dev->channels' directly instead, so that we avoid such memory leak problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: hid-sensor-gyro-3d: Constify platform_device_idKrzysztof Kozlowski2015-05-101-1/+1
| | | | | | | | | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge tag 'iio-fixes-for-4.1a-take2' of ↵Greg Kroah-Hartman2015-05-131-0/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: The usual mixed bag of fixes for IIO in the 4.1 cycle. Second version of this pull request as a small fix to a fix turned up before Greg pulled it for a cc10001 patch near the top of the tree. One core fix * Set updated for a iio kfifo was incorrectly set to false during a failed update, resulting in atttempts to repeat the failed operation appearing to succeed. This time I've decided to list the driver fixes in alphabetical order rather than 'randomly'. * axp288_adc - a recent change added a check for valid info masks when reading channels from consumer drivers. * bmp280 - temperature compensation was failing to read the tfine value, hence causing a temperature of 0 to always be returned and incorrect presure measurements. * cc10001 - Fix channel number mapping when some channels are reserved for remote CPUs. Fix an issue with the use of the power-up/power-down register (basically wrong polarity). Fix an issue due to the missinterpretting the return value from regulator_get_voltage. Add a delay before the start bit as recommended for the hardware to avoid data corruption. * hid pressure - fix channel spec of modfiied, but no modifier (which makes no sense!) * hid proximity - fix channel spec of modified, but no modifier (which makes no sense!). Fix a memory leak in the probe function. * mcp320x - occasional incorrect readings on dma using spi busses due to cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers. * mma9551 - buffer overrun fix (miss specified maximum length of buffers) * mma9553 - endian fix on status message. Add an enable element for activity channel. Input checking for activity period to avoid rather unpredictable results. * spmi-vadc - fix an overflow in the output value normalization seen on some boards. * st-snesors - oops due to use of a mutex that is not yet initialized during probe. * xilinx adc - Some wrong register addresses, a wrong address for vccaux channel, incorrect scale on VREFP and incorrect sign on VREFN.
| * iio:st_sensors: Fix oops when probing SPI devicesAlban Bedel2015-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In SPI mode the transfer buffer is locked with a mutex. However this mutex is only initilized after the probe, but some transfer needs to be done in the probe. To fix this bug we move the mutex initialization at the beginning of the device probe. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Denis Ciocca <denis.ciocca@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-04-141-1/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
| * Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina2015-04-131-1/+2
| |\ | | | | | | | | | | | | | | | Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
| | * HID: hid-sensor-hub: Extend API for async readsSrinivas Pandruvada2015-02-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add additional flag to read in async mode. In this mode the caller will get reply via registered callback for capture_sample. Callbacks can be registered using sensor_hub_register_callback function. The usage id parameter of the capture_sample can be matched with the usage id of the requested attribute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge 4.0-rc7 into staging-nextGreg Kroah-Hartman2015-04-071-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | We want those fixes (iio primarily) into the -next branch to help with merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | iio: fix drivers that check buffer->scan_maskOctavian Purdila2015-03-071-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the in-kernel push interface is used we may have a different masks on the device buffer and the kernel buffer and in this case the device should generate data for the reunion of the buffers, which is available at indio_dev->active_scan_mask. Compiled tested only except for bmc150-accel which was tested at runtime with the hardware. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | IIO: Add support for L3GD20H gyroscopeRobert Dolca2015-03-281-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | It can be used exactly like L3GD20 but it has a different WhoAmI register value. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: gyro: itg3200: add suspend/resume support.NeilBrown2015-03-091-4/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unless we put the device to sleep when not it use, it wastes 6mA. If the device is asleep on probe, the 'id' register sometimes mis-reads - so reset first. If the device responds at all a command sent to the address, it is almost certainly the correct device already. Acked-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: improve usage of gpiod APIUwe Kleine-König2015-02-221-5/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for outputs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: common: ssp_sensors: Add sensorhub gyroscope sensorKarol Wrona2015-01-292-0/+170
| | | | | | | | | | | | | | | | | | This patch adds gyroscope iio driver which uses sensorhub as data provider. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: hid-sensor-gyro-3d: Introduce PMSrinivas Pandruvada2015-01-251-7/+1
|/ | | | | | | | | Use common hid sensor iio pm functions. Also the poll time read and wait is part of power up function of hid sensor iio pm function, so remove from the client drivers. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge tag 'staging-3.19-rc1' of ↵Linus Torvalds2014-12-164-17/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging tree pull request for 3.19-rc1. We continued to delete more lines than were added, always a good thing, but not at a huge rate this release, only about 70k lines removed overall mostly from removing the horrid bcm driver. Lots of normal staging driver cleanups and fixes all over the place, well over a thousand of them, the shortlog shows all the horrid details. The "contentious" thing here is the movement of the Android binder code out of staging into the "real" part of the kernel. This is code that has been stable for a few years now and is working as-is in the tens of millions of devices with no issues. Yes, the code is horrid, and the userspace api leaves a lot to be desired, but it's not going to change due to legacy issues that we have no control over. Because so many devices and companies rely on this, and the code is stable, might as well promote it out of staging. This was all discussed at the Linux Plumbers conference, and everyone participating agreed that this was the best way forward. There is work happening to replace the binder code with something new that is happening right now, but I don't expect to see the results of that work for another year at the earliest. If that ever happens, and Android switches over to it, I'll gladly remove this version. As for maintainers, I'll be glad to maintain this code, I've been doing it for the past few years with no problems. I'll send a MAINTAINERS entry for it before 3.19-final is out, still need to talk to the Google developers about if they are willing to help with it or not, last I checked they were, which was good. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits) Staging: slicoss: Fix long line issues in slicoss.c staging: rtl8712: remove unnecessary else after return staging: comedi: change some printk calls to pr_err staging: rtl8723au: hal: Removed the extra semicolon lustre: Deletion of unnecessary checks before three function calls staging: lustre: fix sparse warnings: static function declaration staging: lustre: fixed sparse warnings related to static declarations staging: unisys: remove duplicate header staging: unisys: remove unneeded structure staging: ft1000 : replace __attribute ((__packed__) with __packed drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c" Drivers:staging:rtl8192e: Fixed checkpatch warning Drivers:staging:clocking-wizard: Added a newline staging: clocking-wizard: check for a valid clk_name pointer staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1() staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB() staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation ...
| * Merge 3.18-rc7 into staging-work.Greg Kroah-Hartman2014-12-031-4/+49
| |\ | | | | | | | | | | | | | | | We want those staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * \ Merge tag 'iio-for-3.19a' of ↵Greg Kroah-Hartman2014-11-054-17/+13
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new drivers, features and cleanups for IIO in the 3.19 cycle. New drivers / supported parts * rockchip - rk3066-tsadc variant * si7020 humidity and temperature sensor * mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202 * bmp280 pressure and temperature sensor * Qualcomm SPMI PMIC current ADC driver * Exynos_adc - support exynos7 New features * vf610-adc - add temperature sensor support * Documentation of current attributes, scaled pressure, offset and scaled humidity, RGBC intensity gain factor and scale applied to differential voltage channels. * Bring iio_event_monitor up to date with newer modifiers. * Add of_xlate function to allow for complex channel mappings from the device tree. * Add -g parameter to generic_buffer example to allow for devices with directly fed (no trigger) buffers. * Move exynos driver over to syscon for PMU register access. Cleanups, fixes for new drivers * lis3l02dq drop an unneeded else. * st sensors - renam st_sensors to st_sensor_settings (for clarity) * st sensors - drop an unused parameter from all the probe utility functions. * vf610 better error handling and tidy up. * si7020 - cleanups following merge * as3935 - drop some unnecessary semicolons. * bmp280 - fix the pressure calculation.
| | * | iio:common: Set the device pointer into ST common sensors libraryDenis CIOCCA2014-10-042-2/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | iio:gyro: Removed unnecessary parameter on common_probe functionDenis CIOCCA2014-10-044-9/+6
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | iio:imu: changed structure name from st_sensors to st_sensor_settingsDenis CIOCCA2014-10-041-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch change structure name and related variables names. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | | Merge branch 'pm-runtime'Rafael J. Wysocki2014-12-081-2/+2
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
| * | | iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2014-12-041-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/iio/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
* | | iio: gyro: bmg160: Fix iio_event_spec directionSrinivas Pandruvada2014-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change event spec direction from IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING to IIO_EV_DIR_EITHER Suggested-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: gyro: bmg160: Send x, y and z motion separatelySrinivas Pandruvada2014-11-161-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | This chip is capable to identify motion across x, y and z axes. So send different events. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: gyro: bmg160: Don't let interrupt mode to be open drainSrinivas Pandruvada2014-11-161-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | Change the mode to push/pull type instead of open drain as some platforms fails to drive the GPIO pin with open drain. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | iio: gyro: bmg160: Error handling when mode set failsSrinivas Pandruvada2014-11-161-1/+13
|/ / | | | | | | | | | | | | | | | | When mode set fails due to some transient failures, it will atleast reset the state of runtime usage count and also let the runtime suspend retry from the driver framework. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | Merge 3.17-rc6 into staging-next.Greg Kroah-Hartman2014-09-221-1/+1
|\ \ | |/ |/| | | | | | | | | We want the fixes in there, and it resolves a merge issue with drivers/iio/accel/bma180.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 22:59:24 +0100