summaryrefslogtreecommitdiffstats
path: root/drivers/iio/humidity (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iio: add SPDX identifier for various driversMatt Ranostay2018-02-181-12/+4
| | | | | | | Add GPLv2+ SPDX identifier and update email for author's drivers. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: dht11: Improve detection of sensor typeHarald Geyer2018-02-171-1/+1
| | | | | | | | | | The old code was based on a DHT11 datasheet which specifies a measurement range of 20%-90% RH. Turns out the sensor actually reports values outside this range, so we should support it as far as possible. Reported-by: Edward Attfield <edward@attfield.ca> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: remove unnecessary get_unaligned_le16()Lorenzo Bianconi2018-01-301-4/+3
| | | | | | | | Remove unnecessary unaligned access routine in hts221_read_oneshot() and the related include Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: add regmap API supportLorenzo Bianconi2018-01-306-217/+103
| | | | | | | | | Introduce regmap API support to access to i2c/spi bus instead of using a custom support. Remove lock mutex since concurrency is already managed by regmap API Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: remove trailing whitespace from a commentLorenzo Bianconi2018-01-301-1/+1
| | | | | Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: remove warnings in hts221_parse_{temp,rh}_caldata()Lorenzo Bianconi2018-01-301-13/+15
| | | | | | | | | | | | | | | | | | | | Remove following sparse warnings in hts221_parse_temp_caldata() and in hts221_parse_rh_caldata(): drivers/iio/humidity/hts221_core.c:302:19: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:314:18: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:320:18: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:355:18: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:361:18: warning: cast to restricted __le16 Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: move common code in hts221_coreLorenzo Bianconi2018-01-084-35/+22
| | | | | | | | Move duplicated i2c/spi probe code in hts221_probe() Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds2017-11-149-9/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
| * iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.ownerJonathan Cameron2017-08-229-9/+0
| | | | | | | | | | | | | | | | | | The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state()Lorenzo Bianconi2017-07-253-16/+7
| | | | | | | | Move data-ready configuration in hts221_buffer.c since it is only related to trigger logic Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: support open drain modeLorenzo Bianconi2017-07-251-1/+21
| | | | | | | | Add open drain support in order to share requested IRQ line between hts221 device and other peripherals Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: support active-low interruptsLorenzo Bianconi2017-07-223-2/+13
| | | | | | | | | Add support for active low interrupts (IRQF_TRIGGER_LOW and IRQF_TRIGGER_FALLING). Configure the device as active high or low according to the requested irq line. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: squash hts221_power_on/off in hts221_set_enableLorenzo Bianconi2017-07-223-23/+8
| | | | | Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: avoid useless ODR reconfigurationLorenzo Bianconi2017-07-221-9/+8
| | | | | | | | Configure sensor ODR just in hts221_write_raw() in order to avoid to set device sample rate multiple times. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: do not overwrite reserved data during power-downLorenzo Bianconi2017-07-221-6/+4
| | | | | | | | | | | GENMASK(6, 3) in CTRL_REG1 and GENMASK(6, 2) in CTRL_REG2 are marked reserved. Do not changed the original value (not declared in the datasheet) during power-down/suspend routines. Fixes: e4a70e3e7d84 (iio: humidity: add support to hts221 rh/temp device) Fixes: b7079eeac5da (iio: humidity: hts221: add power management support) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: move BDU configuration in probe routineLorenzo Bianconi2017-07-221-6/+6
| | | | | | | | Enable Block Data Update in hts221_probe() in order to avoid to reconfigure it every time the sensor is enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: hts221: refactor write_with_mask codeLorenzo Bianconi2017-07-222-58/+42
| | | | | | | | | | Move bit-shift in hts221_write_with_mask() instead of coding the shift depth in the configured value. That change will be necessary to fix an issue in device power-down procedure. Simplify hts221_avg_list table management Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: humidity: htu21: Add OF match tableManivannan Sadhasivam2017-07-011-0/+8
| | | | | | | Add of_match_table for Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: hdc100x: add match table and device id'sMichael Stecklein2017-07-011-0/+11
| | | | | | | | Add of_match_table and point it to a list of compatible device tree device id's. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: hdc100x: document compatible HDC10xx devicesMichael Stecklein2017-07-012-1/+13
| | | | | | | | | Include datasheet links, add i2c_device_id entries, and update kconfig help for compatible HDC10xx devices: HDC1000, HDC1008, HDC1010, HDC1050, and HDC1080. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: hts221: add power management supportLorenzo Bianconi2017-05-144-4/+55
| | | | | | | Add system sleep power management support to hts221 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: hts221: Remove unnecessary cast on void pointersimran singhal2017-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: hdc100x: constify attribute_group structuressimran singhal2017-04-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for attribute_group structures that are only stored in the attrs filed of iio_info structure. As the attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 3459 488 0 3947 f6b drivers/iio/humidity/hdc100x.o File size after: text data bss dec hex filename 3507 424 0 3931 f5b drivers/iio/humidity/hdc100x.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: hid: Add humidity sensor supportSong Hongyan2017-03-253-0/+332
| | | | | | | | | | | | | | Environmental humidity sensor is a hid defined sensor, it shows raw humidity measurement of air. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, humidityrelative data output unit is milli percent. Add the unit convert from percent to milli percent. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge 4.10-rc7 into staging-nextGreg Kroah-Hartman2017-02-061-2/+4
|\ | | | | | | | | | | | | This resolves the merge errors that were reported in linux-next and it picks up the staging and IIO fixes that we need/want in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: dht11: Use usleep_range instead of msleep for start signalJohn Brooks2017-01-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DHT22 (AM2302) datasheet specifies that the LOW start pulse should not exceed 20ms. However, observations with an oscilloscope of an RPi Model 2B (rev 1.1) communicating with a DHT22 sensor showed that the driver was consistently sending start pulses longer than 20ms: Kernel 4.7.10-v7+ (n=132): Minimum pulse length: 20.20ms Maximum: 29.84ms Mean: 24.96ms StDev: 2.82ms Sensor response rate: 100% Read success rate: 76% On kernel 4.8, the start pulse was so long that the sensor would not even respond 97% of the time: Kernel 4.8.16-v7+ (n=100): Minimum pulse length: 30.4ms Maximum: 74.4ms Mean: 39.3ms StDev: 10.2ms Sensor response rate: 3% Read success rate: 3% The driver would return ETIMEDOUT and write log messages like this: [ 51.430987] dht11 dht11@0: Only 1 signal edges detected [ 66.311019] dht11 dht11@0: Only 0 signal edges detected Replacing msleep(18) with usleep_range(18000, 20000) made the pulse length sane again and restored responsiveness: Kernel 4.8.16-v7+ with usleep_range (n=123): Minimum pulse length: 18.16ms Maximum: 20.20ms Mean: 19.85ms StDev: 0.51ms Sensor response rate: 100% Read success rate: 84% Cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Reviewed-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: humidity: Support acpi probe for hts211Shrirang Bagul2016-12-031-0/+8
|/ | | | | | | | Support driver probe by reading unique HID on systems based on ACPI instead of DT compatible strings. Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: si7020: Add devicetree support and trivial bindingsPaul Kocialkowski2016-11-011-1/+10
| | | | | | | | | | This adds devicetree support for the si7020 iio driver. Since it works well without requiring any additional property, its compatible string is added to the trivial i2c devices bindings list. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: remove duplicated include from hts221_buffer.cWei Yongjun2016-11-011-1/+0
| | | | | | | Remove duplicated include. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: hdc100x: add triggered buffer support for HDC100XAlison Schofield2016-10-232-2/+130
| | | | | | | | | | | | | Triggered buffer support uses the HDC100X's dual acquisition mode to read both humidity and temperature in one shot. This patch depends on 447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of temp and humidity") Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: add support to hts221 rh/temp combo deviceLorenzo Bianconi2016-10-237-0/+1193
| | | | | | | | | | | | | | Add support to STM HTS221 humidity + temperature sensor http://www.st.com/resource/en/datasheet/hts221.pdf - continuous mode support - i2c support - spi support - trigger mode support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman2016-09-053-21/+10
|\ | | | | | | | | | | We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: humidity: hdc100x: fix sensor data reads of temp and humidityAlison Schofield2016-08-151-20/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the i2c_smbus_read_byte commmands used to retrieve the sensor data with an i2c_master_recv command. The smbus read byte method fails because the device does not expect a stop condition after sending the first byte. When we issue the second read, we are getting the first byte again. Net effect is that of the 14 bits used for the measurement, the 8 most significant bits are correct, the lower 6 are not. None of the smbus read protocols follow the pattern this device requires (S Addr Rd [A] Data [A] Data NA P), hence the switch to an i2c receive transaction. Applicable from original introduction of this driver, but will require backporting due to churn in the code. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: add Kconfig selects needed for triggered buffer compilesAlison Schofield2016-08-151-0/+2
| | | | | | | | | | | | | | | | | | Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile. Remove IIO_TRIGGER if present since IIO_BUFFER selects it. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: humidity: am2315: set up buffer timestamps for non-zero valuesAlison Schofield2016-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-By: Tiberiu Breana <tiberiu.a.breana@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: humidity: hdc100x: add HDC1000 and HDC1008 to KconfigAlison Schofield2016-08-151-4/+4
|/ | | | | | | | | | hdc100x supports Texas Instruments HDC1000 and HDC1008 relative humidity and temperature sensors. Add these product names to Kconfig. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge 4.7-rc4 into staging-nextGreg Kroah-Hartman2016-06-202-13/+11
|\ | | | | | | | | | | | | We want the fixes in here, and we can resolve a merge issue in drivers/iio/industrialio-trigger.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: hudmidity: hdc100x: fix incorrect shifting and scalingMatt Ranostay2016-06-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | Shifting sensor data to the right 2 bits was incorrect and caused the scaling values + offsets to be invalid. Reported-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Matt Ranostay <mranostay@gmail.com> Tested-by: Alison Schofield <amsfield22@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: humidity: hdc100x: fix IIO_TEMP channel reportingMatt Ranostay2016-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | IIO_TEMP channel was being incorrectly reported back as Celsius when it should have been milliCelsius. This is via an incorrect scale value being returned to userspace. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: humidity: am2315: Remove a stray unlockDan Carpenter2016-05-211-3/+1
| | | | | | | | | | | | | | | | | | We haven't taken the lock yet so we don't need to unlock here. Fixes: 0d96d5ead3f7 ('iio: humidity: Add triggered buffer support for AM2315') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| * iio: humidity: hdc100x: correct humidity integration time maskAlison Schofield2016-05-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Apply the correct mask to enable all available humidity integration times. Currently, the driver defaults to 6500 and all is okay with that. However, if 3850 is selected we get a stuck bit and can't change back to 6500 or select 2500. (Verified with HDC1008) Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Matt Ranostay <mranostay@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: Export I2C module alias informationJavier Martinez Canillas2016-05-212-0/+2
|/ | | | | | | | | | | | | The I2C drivers have an i2c_device_id array but that information isn't exported to the modules using the MODULE_DEVICE_TABLE() macro. So the modules autoloading won't work if the I2C device is registered using OF or legacy board files due missing alias information in the modules. The issue was found using Kieran Bingham's coccinelle semantic patch: https://lkml.org/lkml/2016/5/10/520 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: Add triggered buffer support for AM2315Tiberiu Breana2016-04-241-3/+78
| | | | | Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: humidity: Add support for AM2315Tiberiu Breana2016-04-243-0/+239
| | | | | | | | | | | | Add basic support for the Aosong AM2315 relative humidity and ambient temperature sensor. Includes support for raw readings and ACPI detection. Datasheet: http://www.aosong.com/asp_bin/Products/en/AM2315.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: dht11: Improve loggingHarald Geyer2016-04-101-6/+34
| | | | | | | | | | | | * Unify log messages * Add more DEBUG messages Apparently this driver is working unreliably on some platforms that I can't test. Therefore I want an easy way for bug reporters to provide useful information without making the driver too chatty by default. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* iio: convert to common i2c_check_functionality() return valueMatt Ranostay2016-02-274-4/+4
| | | | | | | | | Previously most drivers that used a i2c_check_functionality() check condition required various error codes on failure. This patchset converts to a standard of -EOPNOTSUPP Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* Merge 4.5-rc3 into staging-nextGreg Kroah-Hartman2016-02-081-4/+4
|\ | | | | | | | | | | We want the upstream staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * iio: dht11: Use boottimeAbhilash Jindal2016-02-011-4/+4
| | | | | | | | | | | | | | | | | | | | Wall time obtained from ktime_get_real_ns is susceptible to sudden jumps due to user setting the time or due to NTP. Boot time is constantly increasing time better suited for comparing two timestamps. Signed-off-by: Abhilash Jindal <klock.android@gmail.com> Reviewed-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | iio: si7020: add support for Hoperf th06Cristina Moraru2016-01-302-1/+3
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for Hoperf th06 humidity and temperature sensor as it uses same register definitions as si7020 th06 Datasheet: http://www.hoperf.com/upload/sensor/TH06.pdf Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 03:20:45 +0100