summaryrefslogtreecommitdiffstats
path: root/drivers/iio/temperature (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iio: ltc2983: Fix of_node refcountingNuno Sá2020-09-291-6/+13
| | | | | | | | | | | | When returning or breaking early from a `for_each_available_child_of_node()` loop, we need to explicitly call `of_node_put()` on the child node to possibly release the node. Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200925091045.302-1-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature:tmp007: Drop of_match_ptr protectionJonathan Cameron2020-09-211-2/+2
| | | | | | | | | | | This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Manivannan Sadhasivam <manivannanece23@gmail.com> Link: https://lore.kernel.org/r/20200910173242.621168-23-jic23@kernel.org
* iio:temperature:tsys01: Drop of_match_ptr protectionJonathan Cameron2020-09-211-1/+2
| | | | | | | | | | | This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Link: https://lore.kernel.org/r/20200910173242.621168-22-jic23@kernel.org
* iio: temperature: mlx90632: Interface to change object ambient temperatureCrt Mori2020-09-131-2/+7
| | | | | | | | | | | | | | | Since object temperature might be different than the sensor temperature the infrared sensors should provide an interface to inject ambient temperature. This was in past done via write to ambient temperature interface (in_temp_ambient_raw), but I think most people did not know about it. This solution introduces a new iio type of the CALIBAMBIENT which is hopefully more descriptive and more explicit about the purpose and capabilities of the sensors. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200906210231.383976-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature:mlx90632: Some stylefixing leftoversCrt Mori2020-09-031-5/+5
| | | | | | | | | | | There is some inconsistency and whitespace cleanup performed in this patch. It was done on top of my other patches, but I can rebase to head of the togreg branch if it would go in sooner. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200818213737.140613-6-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature:mlx90632: Adding extended calibration optionCrt Mori2020-09-031-2/+216
| | | | | | | | | | | | | | | | | | | | | For some time the market wants medical grade accuracy in medical range, while still retaining the declared accuracy outside of the medical range within the same sensor. That is why we created extended calibration which is automatically switched to when object temperature is too high. This patch also introduces the object_ambient_temperature variable which is needed for more accurate calculation of the object infra-red footprint as sensor's ambient temperature might be totally different than what the ambient temperature is at object and that is why we can have some more errors which can be eliminated. Currently this temperature is fixed at 25, but the interface to adjust it by user (with external sensor or just IR measurement of the other object which acts as ambient), will be introduced in another commit. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200818213737.140613-5-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature:mlx90632: Convert polling while loop to regmapCrt Mori2020-09-031-11/+5
| | | | | | | | | | Reduce number of lines and improve readability to convert polling while loops to regmap_read_poll_timeout. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200818213737.140613-4-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature:mlx90632: Add kerneldoc to the internal structCrt Mori2020-09-031-1/+8
| | | | | | | | | Document internal/private struct for mlx90632 device. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200818213737.140613-3-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature:mlx90632: Reduce number of equal calulcationsCrt Mori2020-09-031-8/+13
| | | | | | | | | | | | TAdut4 was calculated each iteration although it did not change. In light of near future additions of the Extended range DSP calculations, this function refactoring will help reduce unrelated changes in that series as well as reduce the number of new functions needed. Signed-off-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200818213737.140613-2-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: mlx90632: Function parameter descriptions must match exactlyLee Jones2020-07-201-2/+2
| | | | | | | | | | | | '*'s are not welcome in kerneldoc parameter names. Fixes the following W=1 kernel build warning(s): drivers/iio/temperature/mlx90632.c:175: warning: Function parameter or member 'data' not described in 'mlx90632_perform_measurement' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: Remove superfluous of_node assignmentsLars-Peter Clausen2020-06-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a driver does not assign an of_node to a IIO device to IIO core will automatically assign the of_node of the parent device. This automatic assignment is done in the iio_device_register() function. There is a fair amount of drivers that currently manually assign the of_node of the IIO device. All but 4 of them can make use of the automatic assignment though. The exceptions are: * mxs-lradc-adc: Which uses the of_node of the parent of the parent. * stm32-dfsdm-adc, stm32-adc and stm32-dac: Which reference the of_node assigned to the IIO device before iio_device_register() is called. All other drivers are updated to use automatic assignment. This reduces the amount of boilerplate code involved in setting up the IIO device. The patch has mostly been auto-generated with the following semantic patch // <smpl> @exists@ expression indio_dev; expression parent; @@ indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(&parent, ...) ... -indio_dev->dev.of_node = parent.of_node; @exists@ expression indio_dev; expression parent; @@ indio_dev = \(devm_iio_device_alloc\|iio_device_alloc\)(parent, ...) ... -indio_dev->dev.of_node = parent->of_node; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: remove left-over parent assignmentsAlexandru Ardelean2020-06-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: remove explicit IIO device parent assignmentAlexandru Ardelean2020-06-1410-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_triggerAlexandru Ardelean2020-05-101-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: max31856: Use get_unaligned_beXX()Andy Shevchenko2020-05-031-2/+3
| | | | | | | This makes the driver code slightly easier to read. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Merge tag 'iio-for-5.8a' of ↵Greg Kroah-Hartman2020-04-231-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...
| * iio: temperature: ltc2983: remove redundant comparison to boolRohit Sarkar2020-04-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Remove redundant comparison to a boolean variable. Fixes coccinelle warning: drivers/iio/temperature//ltc2983.c:393:20-32: WARNING: Comparison to bool drivers/iio/temperature//ltc2983.c:394:20-32: WARNING: Comparison to bool Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | iio: temperature: Add support for Azoteq IQS620AT temperature sensorJeff LaBundy2020-03-273-0/+108
|/ | | | | | | | | This patch adds support for the Azoteq IQS620AT temperature sensor, capable of reporting its absolute die temperature. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* Merge tag 'iio-for-5.6a' of ↵Greg Kroah-Hartman2020-01-102-4/+174
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ...
| * iio: maxim_thermocouple: add thermocouple_type sysfs attributeAndrea Merello2019-11-231-3/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We added a sysfs ABI for getting/setting the type of a thermocouple. This driver supports chips that support specific fixed thermocouple types; we cannot set it, but still we can add this sysfs attribute in RO mode to read-back the thermocouple type. This driver supports actually several chips: - max6675 - max31855[k/j/n/s/t/e/r]asa family Max6675 supports only K-type thermocouples, so we can just report that. Each chip in max31855 family supports just one specific thermocouple type (in the obvious way: i.e. max31855jasa supports J-type). This driver did accept a generic SPI ID and OF compatible "max31855" which does not give any clue about which chip is really involved (and unfortunately it seems we have no way to detect it). This patch introduces a new set of, more specific, SPI IDs and OF compatible strings to better match the chip type. The old, generic, "max31855" binding is kept for compatibility reasons, but this patch aims to deprecate it, so, should we hit it, a warning is spit. In such case the reported thermocouple type in sysfs is '?', because we have no way to know. Regarding the implementation: the thermocouple type information is stored in the driver private data and I've kept only two maxim_thermocouple_chip types in order to avoid a lot of duplications (seven chip types with just a different thermocouple type). RFT because I have no real HW to test this. Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Colin Ian King <colin.king@canonical.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Matt Weber <matthew.weber@rockwellcollins.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Cc: Chuhong Yuan <hslester96@gmail.com> Cc: Daniel Gomez <dagmcr@gmail.com> Cc: linux-iio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: max31856: add support for runtime-configuring the thermocouple typeAndrea Merello2019-11-231-1/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sensor support various thermocouple types (e.g. J, K, N, ...). The driver allows to configure this parameter using a DT property. This is useful when i.e. the thermocouple is physically tied to the sensor and it is usually not removed, or when it is at least known in advance which sensor will be connected to the circuit. However, if the user can randomly connect any kind of thermocouples (i.e. the device exposes a connector, and the user is free to connect its own sensors), it would be more appropriate to provide a mechanism to dynamically switch from one thermocouple type to another. This can be i.e. handled in userspace by a GUI, a configuration file or a program that detects the thermocouple type by reading a GPIO, or a eeprom on the probe, or whatever. This patch adds a IIO attribute that can be used to override, at run-time, the DT-provided setting (which serves as default). Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Colin Ian King <colin.king@canonical.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Matt Weber <matthew.weber@rockwellcollins.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Cc: Chuhong Yuan <hslester96@gmail.com> Cc: Daniel Gomez <dagmcr@gmail.com> Cc: linux-iio@vger.kernel.org Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: max31856: add support for configuring the HW averagingAndrea Merello2019-11-231-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This sensor can perform samples averaging in hardware, but currently the driver leaves this setting alone (default is no averaging). This patch binds this HW setting to the "oversampling_ratio" IIO attribute and allows the user to set the averaging as desired (the HW supports averaging of 2, 5, 8 or 16 samples; in-between values are rounded up). Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Colin Ian King <colin.king@canonical.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Matt Weber <matthew.weber@rockwellcollins.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Cc: Chuhong Yuan <hslester96@gmail.com> Cc: Daniel Gomez <dagmcr@gmail.com> Cc: linux-iio@vger.kernel.org Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: max31856: add option for setting mains filter rejection frequencyAndrea Merello2019-11-231-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This sensor has an embedded notch filter for reducing interferences caused by the power mains. This filter can be tuned to reject either 50Hz or 60Hz (and harmonics). Currently the said setting is left alone (the sensor defaults to 60Hz). This patch introduces a IIO attribute that allows the user to set the said filter to the desired frequency. NOTE: this has been intentionally not tied to any DT property to allow the configuration of this setting from userspace, e.g. with a GUI or by reading a configuration file, or maybe reading a GPIO tied to a physical switch or accessing some device that can autodetect the line frequency. Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Colin Ian King <colin.king@canonical.com> Cc: Patrick Havelange <patrick.havelange@essensium.com> Cc: Matt Weber <matthew.weber@rockwellcollins.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Cc: Chuhong Yuan <hslester96@gmail.com> Cc: Daniel Gomez <dagmcr@gmail.com> Cc: linux-iio@vger.kernel.org Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | iio: temperature: ltc2983: fix u32 read into a unsigned long longColin Ian King2019-12-081-2/+4
|/ | | | | | | | | | | | | Currently the read of temp using of_property_read_u32_index is reading a u32 value into a unsigned long long. This relies on machine endianness to work correctly, so fix this by reading a u32 value and setting temp to this value. Addresses-Coverity: ("Reliance on integer endianness") Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: Add support for LTC2983Nuno Sá2019-10-223-0/+1569
| | | | | | | | | | | | The LTC2983 is a Multi-Sensor High Accuracy Digital Temperature Measurement System. It measures a wide variety of temperature sensors and digitally outputs the result, in °C or °F, with 0.1°C accuracy and 0.001°C resolution. It can measure the temperature of all standard thermocouples (type B,E,J,K,N,S,R,T), standard 2-,3-,4-wire RTDs, thermistors and diodes. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temp: maxim thermocouple: Drop unneeded semi colon.Jonathan Cameron2019-10-181-1/+1
| | | | | | | | | | Identified by coccinelle CHECK drivers/iio/temperature/maxim_thermocouple.c drivers/iio/temperature/maxim_thermocouple.c:197:3-4: Unneeded semicolon Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
* iio: max31856: add missing of_node and parent references to iio_devAndrea Merello2019-09-151-0/+2
| | | | | | | | | Adding missing indio_dev->dev.of_node references so that, in case multiple max31856 are present, users can get some clues to being able to distinguish each of them. While at it, add also the missing parent reference. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: maxim_thermocouple: Use device-managed APIsChuhong Yuan2019-07-271-22/+3
| | | | | | | | | Use device-managed APIs to simplify the code. The remove functions are redundant now and can be deleted. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Merge 5.2-rc6 into staging-nextGreg Kroah-Hartman2019-06-235-28/+11
|\ | | | | | | | | | | We want the fixes and this resolves a merge issue as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'staging-5.2-rc6' of ↵Linus Torvalds2019-06-211-2/+7
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO/counter fixes from Greg KH: "Here are some small driver bugfixes for some staging/iio/counter drivers. Staging and IIO have been lumped together for a while, as those subsystems cross the areas a log, and counter is used by IIO, so that's why they are all in one pull request here. These are small fixes for reported issues in some iio drivers, the erofs filesystem, and a build issue for counter code. All have been in linux-next with no reported issues" * tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: erofs: add requirements field in superblock counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit
| | * Merge tag 'iio-fixes-for-5.2b' of ↵Greg Kroah-Hartman2019-06-171-2/+7
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 5.2 cycle. * ad7150 - sense of bit for controlling adaptive vs fixed threshold was flipped. * adt7316 - Fix a build issue due to wrong headers for gpio usage. * lsm6dsx - correctly suspend / resume i2c slaves when the host goes to sleep. * mlx90632 - relax a compatability check to allow for newer devices. Also one counters fix * counter/ftm-quaddec - missing dependencies in Kconfig. * tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit
| | | * iio: temperature: mlx90632 Relax the compatibility checkCrt Mori2019-05-271-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Register EE_VERSION contains mixture of calibration information and DSP version. So far, because calibrations were definite, the driver compatibility depended on whole contents, but in the newer production process the calibration part changes. Because of that, value in EE_VERSION will be changed and to avoid that calibration value is same as DSP version the MSB in calibration part was fixed to 1. That means existing calibrations (medical and consumer) will now have hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility should be based only on DSP version part of the EE_VERSION (bits 0 to 7) register. Signed-off-by: Crt Mori <cmo@melexis.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner2019-06-053-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309Thomas Gleixner2019-06-051-12/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge 5.2-rc3 into staging-nextGreg Kroah-Hartman2019-06-033-4/+3
|\| | | | | | | | | | | | | | | | | We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner2019-05-302-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / iio: temperature: maxim_thermocouple: declare missing of tableDaniel Gomez2019-04-271-0/+10
|/ | | | | | | | | | | | | | | | | | | | | | | | Add missing <of_device_id> table for SPI driver relying on SPI device match since compatible is in a DT binding or in a DTS. Before this patch: modinfo drivers/iio/temperature/maxim_thermocouple.ko | grep alias alias: spi:max31855 alias: spi:max6675 After this patch: modinfo drivers/iio/temperature/maxim_thermocouple.ko | grep alias alias: spi:max31855 alias: spi:max6675 alias: of:N*T*Cmaxim,max31855C* alias: of:N*T*Cmaxim,max31855 alias: of:N*T*Cmaxim,max6675C* alias: of:N*T*Cmaxim,max6675 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: max31856: fix uninitialized error returnColin Ian King2019-04-141-0/+3
| | | | | | | | | | | | Currently if mask is neither CHAN_INFO_RAW or CHAN_INFO_SCALE then then an uninitialized error return 'ret' is returned. Fix this by adding a default case that ensures -EINVAL is returned for this specific case. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio:temperature: Add MAX31856 thermocouple supportParesh Chaudhary2019-04-043-0/+364
| | | | | | | | | | | | | | | This patch adds support for Maxim MAX31856 thermocouple temperature sensor support. More information can be found in: https://www.maximintegrated.com/en/ds/MAX31856.pdf NOTE: Driver support only Comparator Mode. Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com> Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* drivers: iio: Kconfig: pedantic cleanupEnrico Weigelt, metux IT consult2019-04-041-8/+8
| | | | | | | | Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede2018-11-161-1/+2
| | | | | | | | | | | | | | | | | | Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
*-. Merge remote-tracking branches 'regmap/topic/noinc' and ↵Mark Brown2018-10-211-1/+2
|\ \ | | | | | | | | | 'regmap/topic/single-rw' into regmap-next
| | * regmap: split up regmap_config.use_single_rwDavid Frey2018-09-071-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | Merge tag 'iio-fixes-4.19a' of ↵Greg Kroah-Hartman2018-09-091-1/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.19 cycle. * ad9523 - sysfs write should return the number of characters used or an error, not 0 which could result in an infinite loop in userspace. * lsm6dsx - Fix computation of length when updating the watermark to include timestamps avoiding the watermark being set earlier than intended. * maxim_thermocouple - Revert a patch adding the max31856 as it's not actually compatible with the register set that this driver supports. * si1133 - Fix an impossible value check so we don't always error out whether the passed in value is good or bad.
| * Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"Matt Ranostay2018-09-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 535fba29b3e1afef4ba201b3c69a6992583ec0bd. Seems the submitter (er me, hang head in shame) didn't look at the datasheet enough to see that the registers are quite different. This needs to be reverted because a) would never work b) to open it be added to a Maxim RTDs (Resistance Temperature Detectors) under development by author Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | i2c: remove i2c_lock_adapter and use i2c_lock_bus directlyPeter Rosin2018-07-131-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | The i2c_lock_adapter name is ambiguous since it is unclear if it refers to the root adapter or the adapter you name in the argument. The natural interpretation is the adapter you name in the argument, but there are historical reasons for that not being the case; it in fact locks the root adapter. Just remove the function and force users to spell out the I2C_LOCK_ROOT_ADAPTER name to indicate what is really going on. Also remove i2c_unlock_adapter, of course. This patch was generated with git grep -l 'i2c_\(un\)\?lock_adapter' \ | xargs sed -i 's/i2c_\(un\)\?lock_adapter(\([^)]*\))/'\ 'i2c_\1lock_bus(\2, I2C_LOCK_ROOT_ADAPTER)/g' followed by white-space touch-up. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* iio temperature/mlx90632: silence a static checker warningDan Carpenter2018-02-241-0/+2
| | | | | | | | | | | | | This shouldn't affect runtime at all, but Smatch complains that we should check if mlx90632_read_ambient_raw() otherwise we "ambient_new_raw" can be uninitialized. drivers/iio/temperature/mlx90632.c:509 mlx90632_calc_ambient_dsp105() error: uninitialized symbol 'ambient_new_raw'. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: add SPDX identifier for various driversMatt Ranostay2018-02-181-12/+4
| | | | | | | Add GPLv2+ SPDX identifier and update email for author's drivers. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: temperature: Adding support for MLX90632Crt Mori2018-02-043-0/+763
| | | | | | | | | | Melexis has just released Infra Red temperature sensor MLX90632 used for contact-less temperature measurement. Driver provides basic functionality for reporting object (and ambient) temperature with support for object emissivity. Signed-off-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:40:13 +0100