summaryrefslogtreecommitdiffstats
path: root/drivers/iio (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iio: adc: at91-sama5d2_adc: fix probe error on missing trigger propertyEugen Hristev2017-10-141-16/+29
| | | | | | | | | | | | | | This fix allows platforms to probe correctly even if the trigger edge property is missing. The hardware trigger will no longer be registered in the sybsystem Preserves backwards compatibility with the support that was in the driver before the hardware trigger. https://storage.kernelci.org/mainline/master/v4.14-rc2-255-g74d83ec2b734/arm/sama5_defconfig/lab-free-electrons/boot-at91-sama5d2_xplained.txt Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Fixes: 5e1a1da0f ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: dln2-adc: fix build errorRandy Dunlap2017-10-081-0/+2
| | | | | | | | | | | | | | | | The dln2-adc driver uses interface(s) that are controlled by the IIO_TRIGGERED_BUFFER Kconfig symbol, so the driver needs to select that symbol to prevent the build error. drivers/iio/adc/dln2-adc.o: In function `dln2_adc_probe': dln2-adc.c:(.text+0x528): undefined reference to `devm_iio_triggered_buffer_setup' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Cc: Jack Andersen <jackoalan@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: dummy: events: Add missing breakLars-Peter Clausen2017-10-011-0/+1
| | | | | | | | | | | | Add missing break in iio_simple_dummy_write_event_config() for the voltage threshold event enable attribute. Without this writing to the in_voltage0_thresh_rising_en always returns -EINVAL even though the change was correctly applied. Fixes: 3e34e650db197 ("iio: dummy: Demonstrate the usage of new channel types") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: pressure: zpa2326: Remove always-true check which confuses gccGeert Uytterhoeven2017-09-251-7/+3
| | | | | | | | | | | | | | | | | | | | | With gcc 4.1.2: drivers/iio/pressure/zpa2326.c: In function ‘zpa2326_wait_oneshot_completion’: drivers/iio/pressure/zpa2326.c:868: warning: ‘ret’ may be used uninitialized in this function When testing for "timeout < 0", timeout is already guaranteed to be strict negative, so the branch is always taken, and ret is thus always initialized. But (some version of) gcc is not smart enough to notice. Remove the check to fix this. As there is no other code in between assigning the error codes and returning them, the error codes can be returned immediately, and the intermediate variable can be dropped. Drop the "else" to please checkpatch. Fixes: e7215fe4d51e69c9 ("iio: pressure: zpa2326: report interrupted case as failure") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: proximity: as3935: noise detection + threshold changesMatt Ranostay2017-09-251-3/+40
| | | | | | | | | | | | | | Most applications are too noisy to allow the default noise and watchdog settings, and thus need to be configurable via DT properties. Also default settings to POR defaults on a reset, and register distuber interrupts as noise since it prevents proper usage. Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Merge tag 'iio-fixes-for-4.14a' of ↵Greg Kroah-Hartman2017-09-2511-23/+83
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.14 cycle Note this includes fixes from recent merge window. As such the tree is based on top of a prior staging/staging-next tree. * iio core - return and error for a failed read_reg debugfs call rather than eating the error. * ad7192 - Use the dedicated reset function in the ad_sigma_delta library instead of an spi transfer with the data on the stack which could cause problems with DMA. * ad7793 - Implement a dedicate reset function in the ad_sigma_delta library and use it to correctly reset this part. * bme280 - ctrl_reg write must occur after any register writes for updates to take effect. * mcp320x - negative voltage readout was broken. - Fix an oops on module unload due to spi_set_drvdata not being called in probe. * st_magn - Fix the data ready line configuration for the lis3mdl. It is not configurable so the st_magn core was assuming it didn't exist and so wasn't consuming interrupts resulting in an unhandled interrupt. * stm32-adc - off by one error on max channels checking. * stm32-timer - preset should not be buffered - reorganising register writes avoids this. - fix a corner case in which write preset goes wrong when a timer is used first as a trigger then as a counter with preset. Odd case but you never know. * ti-ads1015 - Fix setting of comparator polarity by fixing bitfield definition. * twl4030 - Error path handling fix to cleanup in event of regulator registration failure. - Disable the vusb3v1 regulator correctly in error handling - Don't paper over a regulator enable failure.
| * iio: core: Return error for failed read_regMatt Fornero2017-09-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | If an IIO device returns an error code for a read access via debugfs, it is currently ignored by the IIO core (other than emitting an error message). Instead, return this error code to user space, so upper layers can detect it correctly. Signed-off-by: Matt Fornero <matt.fornero@mathworks.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: ad7793: Fix the serial interface resetDragos Bogdan2017-09-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The serial interface can be reset by writing 32 consecutive 1s to the device. 'ret' was initialized correctly but its value was overwritten when ad7793_check_platform_data() was called. Since a dedicated reset function is present now, it should be used instead. Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: ad_sigma_delta: Implement a dedicated reset functionDragos Bogdan2017-09-241-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * IIO: BME280: Updates to Humidity readings need ctrl_reg write!Colin Parker2017-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ctrl_reg register needs to be written after any write to the humidity registers. The value written to the ctrl_reg register does not necessarily need to change, but a write operation must occur. The regmap_update_bits functions will not write to a register if the register value matches the value to be written. This saves unnecessary bus operations. The change in this patch forces a bus write during the chip_config operation by switching to regmap_write_bits. This will fix issues where the Humidity Sensor Oversampling bits are not updated after initialization. Signed-off-by: Colin Parker <colin.parker@aclima.io> Acked-by: Andreas Klinger <ak@it-klinger.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: mcp320x: Fix readout of negative voltagesLukas Wunner2017-09-241-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301") returns a signed voltage from mcp320x_adc_conversion() but neglects that the caller interprets a negative return value as failure. Only mcp3301 (and the upcoming mcp3550/1/3) is affected as the other chips are incapable of measuring negative voltages. Fix and while at it, add mcp3301 to the list of supported chips at the top of the file. Fixes: f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301") Cc: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: mcp320x: Fix oops on module unloadLukas Wunner2017-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver calls spi_get_drvdata() in its ->remove hook even though it has never called spi_set_drvdata(). Stack trace for posterity: Unable to handle kernel NULL pointer dereference at virtual address 00000220 Internal error: Oops: 5 [#1] SMP ARM [<8072f564>] (mutex_lock) from [<7f1400d0>] (iio_device_unregister+0x24/0x7c [industrialio]) [<7f1400d0>] (iio_device_unregister [industrialio]) from [<7f15e020>] (mcp320x_remove+0x20/0x30 [mcp320x]) [<7f15e020>] (mcp320x_remove [mcp320x]) from [<8055a8cc>] (spi_drv_remove+0x2c/0x44) [<8055a8cc>] (spi_drv_remove) from [<805087bc>] (__device_release_driver+0x98/0x134) [<805087bc>] (__device_release_driver) from [<80509180>] (driver_detach+0xdc/0xe0) [<80509180>] (driver_detach) from [<8050823c>] (bus_remove_driver+0x5c/0xb0) [<8050823c>] (bus_remove_driver) from [<80509ab0>] (driver_unregister+0x38/0x58) [<80509ab0>] (driver_unregister) from [<7f15e69c>] (mcp320x_driver_exit+0x14/0x1c [mcp320x]) [<7f15e69c>] (mcp320x_driver_exit [mcp320x]) from [<801a78d0>] (SyS_delete_module+0x184/0x1d0) [<801a78d0>] (SyS_delete_module) from [<80108100>] (ret_fast_syscall+0x0/0x1c) Fixes: f5ce4a7a9291 ("iio: adc: add driver for MCP3204/08 12-bit ADC") Cc: Oskar Andero <oskar.andero@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: stm32: fix bad error check on max_channelsFabrice Gasnier2017-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | Fix a bad error check when counting 'st,adc-channels' array elements. This is seen when all channels are in use simultaneously. Fixes: 64ad7f643 ("iio: adc: stm32: introduce compatible data cfg") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: trigger: stm32-timer: fix a corner case to write presetFabrice Gasnier2017-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Balance timer start routine that sets ARPE: clear it in stop routine. This fixes a corner case, when timer is used successively as trigger (with sampling_frequency start/stop routines), then as a counter (with preset). Fixes: 93fbe91b5521 ("iio: Add STM32 timer trigger driver") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: trigger: stm32-timer: preset shouldn't be bufferedFabrice Gasnier2017-09-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, setting preset value (ARR) will update directly 'Auto reload value' only on 1st write access. But then, ARPE is set. This makes ARR a shadow register. Preset value should be updated upon each write request: ensure ARPE is 0. This fixes successive writes to preset attribute. Fixes: 4adec7da0536 ("iio: stm32 trigger: Add quadrature encoder device") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: twl4030: Return an error if we can not enable the vusb3v1 ↵Christophe JAILLET2017-09-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | regulator in 'twl4030_madc_probe()' If we can not enable the regulator, go through the error handling path instead of silently continuing. Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path ↵Christophe JAILLET2017-09-241-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of 'twl4030_madc_probe()' Commit 7cc97d77ee8a has introduced a call to 'regulator_disable()' in the .remove function. So we should also have such a call in the .probe function in case of error after a successful 'regulator_enable()' call. Add a new label for that and use it. Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'Christophe JAILLET2017-09-241-2/+4
| | | | | | | | | | | | | | | | | | | | | | If 'devm_regulator_get()' fails, we should go through the existing error handling path instead of returning directly, as done is all the other error handling paths in this function. Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDLLorenzo Bianconi2017-09-032-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Data-ready line in LIS3MDL is routed to drdy pin and it is not possible to select a different INT pin. st_sensors_set_dataready_irq() assumes that if drdy int address is not exported in register map, irq trigger is not supported by the sensor and hw_irq_trigger is always false. Based on this configuration st_sensors_irq_thread does not consume generated interrupt causing an unhandled irq. Fix this taking into account status register address in st_sensors_set_dataready_irq() Fixes: 90efe0556292 (iio: st_sensors: harden interrupt handling) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: adc: ti-ads1015: fix comparator polarity settingAkinobu Mita2017-09-031-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | The comparator polarity field in config register is not correctly initialized as per the interrupt trigger setting. Because the bitfield definision is wrong and bit shifting is missed. Fixes: d9f39babd8ba ("iio: adc: ti-ads1015: add threshold event support") Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | Merge tag 'mfd-next-4.14' of ↵Linus Torvalds2017-09-079-4/+537
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
| | \
| | \
| *-. \ Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', ↵Lee Jones2017-09-0526-58/+770
| |\ \ \ | | | | | | | | | | | | | | | 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged
| | | * | mfd: twl: Move header file out of I2C realmWolfram Sang2017-09-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | | iio: adc: stm32: add support for lptimer triggersFabrice Gasnier2017-09-041-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | STM32 ADC supports hardware triggers like STM32 Low-Power Timer. For instance, STM32H7 ADC may be triggered by instances 1, 2 or 3. Add hardware triggered mode so Low-Power Timer Trigger driver can validate device. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | | iio: counter: Add support for STM32 LPTimerFabrice Gasnier2017-09-043-0/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for STM32 Low-Power Timer, that can be used as counter or quadrature encoder. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | | iio: trigger: Add STM32 LPTimer trigger driverFabrice Gasnier2017-09-043-0/+130
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for LPTIMx_OUT triggers that can be found on some STM32 devices. These triggers can be used then by ADC or DAC. Typical usage is to configure LPTimer as PWM output (via pwm-stm32-lp) and have synchronised analog conversions with these triggers. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2017-09-051-0/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID update from Jiri Kosina: - Wacom driver fixes/updates (device name generation improvements, touch ring status support) from Jason Gerecke - T100 touchpad support from Hans de Goede - support for batteries driven by HID input reports, from Dmitry Torokhov - Arnd pointed out that driver_lock semaphore is superfluous, as driver core already provides all the necessary concurency protection. Removal patch from Binoy Jayan - logical minimum numbering improvements in sensor-hub driver, from Srinivas Pandruvada - support for Microsoft Win8 Wireless Radio Controls extensions from João Paulo Rechi Vita - assorted small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (28 commits) HID: prodikeys: constify snd_rawmidi_ops structures HID: sensor: constify platform_device_id HID: input: throttle battery uevents HID: usbmouse: constify usb_device_id and fix space before '[' error HID: usbkbd: constify usb_device_id and fix space before '[' error. HID: hid-sensor-hub: Force logical minimum to 1 for power and report state HID: wacom: Do not completely map WACOM_HID_WD_TOUCHRINGSTATUS usage HID: asus: Add T100CHI bluetooth keyboard dock touchpad support HID: ntrig: constify attribute_group structures. HID: logitech-hidpp: constify attribute_group structures. HID: sensor: constify attribute_group structures. HID: multitouch: constify attribute_group structures. HID: multitouch: use proper symbolic constant for 0xff310076 application HID: multitouch: Support Asus T304UA media keys HID: multitouch: Support HID_GD_WIRELESS_RADIO_CTLS HID: input: optionally use device id in battery name HID: input: map digitizer battery usage HID: Remove the semaphore driver_lock HID: wacom: add USB_HID dependency HID: add ALWAYS_POLL quirk for Logitech 0xc077 ...
| * | | | HID: hid-sensor-hub: Force logical minimum to 1 for power and report stateSrinivas Pandruvada2017-08-091-0/+3
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the reference HID sensor hub firmware all Named array enums were 0-based. There is no description of the default base of enums in HID sensor hub specification as logical minimum should have set this base value. Every sensor hub implemented enum as 1-based, without explicitly setting logical minimum to 1, because of the implementation by one of the major OS vendor. In Linux we used logical minimum to decide the enum base. Some sensor hub FWs already changed logical minimum from 0 to 1. We hoped that every other vendor will follow. But that didn't happen and we had to fix the report header for every sensor hub to change logical minimum to 1 by using .report_fixup() callback. So for every new sensor hub we had to modify source code by adding this quirk based on the vendor and device id. This is becoming a maintenance burden. This patch hardcodes the logical minimum of power and report state attributes to 1. In this way we can remove the existing quirks and also we don't have to add more quirks. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge 4.13-rc7 into staging-nextGreg Kroah-Hartman2017-08-288-40/+100
|\ \ \ \ | | |/ / | |/| / | |_|/ |/| | | | | We want the staging and iio fixes in here to handle the merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | iio: magnetometer: st_magn: remove ihl property for LSM303AGRLorenzo Bianconi2017-08-201-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove IRQ active low support for LSM303AGR since the sensor does not support that capability for data-ready line Fixes: a9fd053b56c6 (iio: st_sensors: support active-low interrupts) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: magnetometer: st_magn: fix status register address for LSM303AGRLorenzo Bianconi2017-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: hid-sensor-trigger: Fix the race with user space powering up sensorsSrinivas Pandruvada2017-08-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: trigger: stm32-timer: fix get trigger modeFabrice Gasnier2017-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix reading trigger mode, when other bit-fields are set. SMCR register value must be masked to read SMS (slave mode selection) only. Fixes: 9eba381 ("iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: imu: adis16480: Fix acceleration scale factor for adis16480Dragos Bogdan2017-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: adc: stm32: fix common clock rateFabrice Gasnier2017-07-301-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ADC clock input is provided to internal prescaler (that decreases its frequency). It's then used as reference clock for conversions. - Fix common clock rate used then by stm32-adc sub-devices. Take common prescaler into account. Currently, rate is used to set "boost" mode. It may unnecessarily be set. This impacts power consumption. - Fix ADC max clock rate on STM32H7 (fADC from datasheet). Currently, prescaler may be set too low. This can result in ADC reference clock used for conversion to exceed max allowed clock frequency. Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: adc: ina219: Avoid underflow for sleeping timeStefan Brüns2017-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Proper support for the INA219 lowered the minimum sampling period from 2*140us to 2*84us. Subtracting 200us later leads to an underflow and an almost infinite udelay later. Using a signed int for the sampling period provides sufficient range (at most 2*8640*1024us), but catches the underflow when comparing with buffer_us. Fixes: 18edac2e22f4 ("iio: adc: Fix integration time/averaging for INA219/220") Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: trigger: stm32-timer: add enable attributeFabrice Gasnier2017-07-301-14/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use encoder mode, timers needs to be enabled (e.g. CEN bit) along with peripheral clock. Add IIO_CHAN_INFO_ENABLE attribute to handle this. Also, in triggered mode, CEN bit is set automatically in hardware. Then clock must be enabled before starting triggered mode. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: trigger: stm32-timer: fix get/set down count directionFabrice Gasnier2017-07-301-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: 4adec7da0536 ("iio: stm32 trigger: Add quadrature encoder device") This fixes two issues: - stm32_set_count_direction: to set down direction - stm32_get_count_direction: to get down direction IIO core provides/expects value to be an index of iio_enum items array. This needs to be turned by these routines into TIM_CR1_DIR (e.g. BIT(4)) value. Also, report error when attempting to write direction, when in encoder mode: in this case, direction is read only (given by encoder inputs). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: trigger: stm32-timer: fix write_raw return valueFabrice Gasnier2017-07-301-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: 4adec7da0536 ("iio: stm32 trigger: Add quadrature encoder device") IIO core expects zero as return value for write_raw() callback in case of success. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: trigger: stm32-timer: fix quadrature mode get routineFabrice Gasnier2017-07-301-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: 4adec7da0536 ("iio: stm32 trigger: Add quadrature encoder device") SMS bitfiled is mode + 1. After reset, upon boot, SMS = 0. When reading from sysfs, stm32_get_quadrature_mode() returns -1 (e.g. -EPERM) which is wrong error code here. So, check SMS bitfiled matches valid encoder mode, or return -EINVAL. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | iio: bmp280: properly initialize device for humidity readingAndreas Klinger2017-07-302-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the device is not initialized at least once it happens that the humidity reading is skipped, which means the special value 0x8000 is delivered. For omitting this case the oversampling of the humidity must be set before the oversampling of the temperature und pressure is set as written in the datasheet of the BME280. Furthermore proper error detection is added in case a skipped value is read from the device. This is done also for pressure and temperature reading. Especially it don't make sense to compensate this value and treat it as regular value. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | | Merge tag 'iio-for-4.14b' of ↵Greg Kroah-Hartman2017-08-2024-205/+1180
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanup for the 4.14 cycle. New device support: * ak8974 - support the AMI306. * st_magnetometer - add support for the LIS2MDL with bindings. * rockchip-saradc - add binding for rv1108 SoC (no driver change). * srf08 - add srf02 (i2c only) and srf10 support. * stm32-timer - support for the STM32H7 to existing driver. Features: * tools - move over to the tools buildsystem rather than hand rolling. - add an install section to the build. * ak8974 - use serial number to add device randomness. - add AMI306 calibration data output. * ccs811 - triggered buffer support. * srf08 - add a device tree table as the old style i2c probing is going away, - add triggered buffer support * st32-adc - add optional st,min-sample-time-nsecs binding to allow control of sampling against analog circuitry. * stm32-timer - add output compare triggers. * ti-ads1015 - add threshold event support. * ti-ads7950 - Allow use on ACPI platforms including providing a default reference voltage as there is no way to obtain this on ACPI currently. Cleanup and fixes: * ad7606 - fix an error return code in probe. * ads1015 - fix incorrect data rate setting update when capture in progress, - fix wrong scale information for the ADS1115, - make conversions work when CONFIG_PM is not set, - make sure we don't get a stale result after a runtime resume by ensuring we wait long enough, - avoid returning a false error form the buffer setup callbacks, - add enough wait time to get the correct conversion, - remove an unnecessary config register update, - add a helper to set conversion mode reducing repeated boilerplate, - use devm_iio_triggered_buffer_setup to simplify error and remove paths, - use iio_device_claim_direct_mode instead of opencoding the same. * ak8974 - mark the INT_CLEAR register as precious to prevent debugfs access. * apds9300 - constify the i2c_device_id. * at91-sama5 adc - add missing Kconfig dependency. * bma180 accel - constify the i2c_device_id. * rockchip_saradc - explicitly request exclusive reset control as part of the reset rework on going throughout the kernel. * st_accel - fix drdy configuration for a load of accelerometers that only have the int1 line. Fix is unimportant as presumably no deviec tree actually used the non existent hardware line. * st_pressure - fix drdy configuration for LPS22HB and LPS25H by dropping int2 support as they don't have this. Fix is unimportant as presumably no device tree actually used the non existent hardware line. * stm32-dac - explicitly request exclusive reset control (part of reset being reworked). * tsl2583 - constify the i2c_device_id. * xadc - coding style fixes.
| * | | iio: adc: rockchip_saradc: explicitly request exclusive reset controlPhilipp Zabel2017-08-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-iio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: dac: stm32-dac-core: explicitly request exclusive reset controlPhilipp Zabel2017-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-iio@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: adc: ti-ads1015: add threshold event supportAkinobu Mita2017-08-201-2/+407
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ADS1015 device provides programmable comparator that can issue an interrupt on the ALERT pin. This change adds the iio threshold event support for that feature. The ADS1015 device only have a single config register which contains an input multiplexer selection, comparator settings, and etc. So only a single event channel can be enabled at a time. Also enabling both buffer and event are prohibited for simplicity. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: adc: ti-ads1015: use iio_device_claim_direct_mode()Akinobu Mita2017-08-201-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While the iio buffer for the ti-ads1015 driver is enabled, reading the raw ADC channel data is restricted. We usually use the iio_device_claim_direct_mode()/iio_device_release_direct_mode() pair for that. This change consequently reverses the locking order for the driver's private lock and indio_dev->mlock which acquired by iio_device_claim_direct_mode() internally. But it's safe because there is no other dependency between these locks. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: adc: ti-ads1015: use devm_iio_triggered_buffer_setupAkinobu Mita2017-08-201-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_iio_triggered_buffer_setup to simplify the error path in the probe() and remove() function. This changes the remove order, but the end result of remove function actually does the reverse of probe. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: adc: ti-ads1015: add helper to set conversion modeAkinobu Mita2017-08-201-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a helper function to set conversion mode as there are a fair number of users. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: adc: ti-ads1015: remove unnecessary config register updateAkinobu Mita2017-08-201-14/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ti-ads1015 driver has eight iio voltage channels and each iio channel can hold own scale information. The ADS1015 device only have a single config register which contains an input multiplexer selection, PGA and data rate settings. So the driver should load the correct settings when the input multiplexer selection is changed. However, regardless of which channlel is currently selected, changing any iio channel's scale information immediately overwrites the current PGA setting in the config register. It is harmless because the correct PGA settings are reloaded just before getting adc result anyway. But it is unnecessary register update and should be removed. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * | | iio: adc: ti-ads1015: add adequate wait time to get correct conversionAkinobu Mita2017-08-201-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver assumes that the device is operating in the continuous conversion mode which performs the conversion continuously. So this driver inserts a wait time before reading the conversion register if the configuration is changed from a previous request. Currently, the wait time is only the period required for a single conversion that is calculated as the reciprocal of the sampling frequency. However we also need to wait for the the previous conversion to complete. Otherwise we probably get the conversion result for the previous configuration when the sampling frequency is lower. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 08:33:35 +0100