summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/qp.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* IB/hfi1: Clear the IOWAIT pending bits when QP is put into error stateKaike Wan2019-03-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | When a QP is put into error state, it may be waiting for send engine resources. In this case, the QP will be removed from the send engine's waiting list, but its IOWAIT pending bits are not cleared. This will normally not have any major impact as the QP is being destroyed. However, the QP still needs to wind down its operations, such as draining the send queue by scheduling the send engine. Clearing the pending bits will avoid any potential complications. In addition, if the QP will eventually hang, clearing the pending bits can help debugging by presenting a consistent picture if the user dumps the qp_stats. This patch clears a QP's IOWAIT_PENDING_IB and IO_PENDING_TID bits in priv->s_iowait.flags in this case. Fixes: 5da0fc9dbf89 ("IB/hfi1: Prepare resource waits for dual leg") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Failed to drain send queue when QP is put into error stateKaike Wan2019-03-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a QP is put into error state, all pending requests in the send work queue should be drained. The following sequence of events could lead to a failure, causing a request to hang: (1) The QP builds a packet and tries to send through SDMA engine. However, PIO engine is still busy. Consequently, this packet is put on the QP's tx list and the QP is put on the PIO waiting list. The field qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN; (2) The QP is put into error state by the user application and notify_error_qp() is called, which removes the QP from the PIO waiting list and the packet from the QP's tx list. In addition, qp->s_flags is cleared of RVT_S_ANY_WAIT_IO bits, which does not include HFI1_S_WAIT_PIO_DRAIN bit; (3) The hfi1_schdule_send() function is called to drain the QP's send queue. Subsequently, hfi1_do_send() is called. Since the flag bit HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails. As a result, hfi1_do_send() bails out without draining any request from the send queue; (4) The PIO engine completes the sending and tries to wake up any QP on its waiting list. But the QP has been removed from the PIO waiting list and therefore is kept in sleep forever. The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2). HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN. Fixes: 2e2ba09e48b7 ("IB/rdmavt, IB/hfi1: Create device dependent s_flags") Cc: <stable@vger.kernel.org> # 4.19.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Fix a build warning for TID RDMA READKaike Wan2019-02-151-0/+1
| | | | | | | | | | | | | | | | | | | | | The following build warning was produced for the TID RDMA READ patch ("IB/hfi1: Enable TID RDMA READ protocol"): drivers/infiniband/hw/hfi1/qp.c: In function 'hfi1_setup_wqe': drivers/infiniband/hw/hfi1/qp.c:328:3: warning: this statement may fall through [-Wimplicit-fallthrough=] hfi1_setup_tid_rdma_wqe(qp, wqe); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/hfi1/qp.c:329:2: note: here case IB_QPT_UC: ^~~~ This patch will fix the issue by adding the "fall through" comment. Fixes: f1ab4efa6d32 ("IB/hfi1: Enable TID RDMA READ protocol") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Prioritize the sending of ACK packetsKaike Wan2019-02-061-1/+14
| | | | | | | | | | | | | | | | | | | | | ACK packets are generally associated with request completion and resource release and therefore should be sent first. This patch optimizes the send engine by using the following policies: (1) QPs with RVT_S_ACK_PENDING bit set in qp->s_flags or qpriv->s_flags should have their priority incremented; (2) QPs with ACK or TID-ACK packet queued should have their priority incremented; (3) When a QP is queued to the wait list due to resource constraints, it will be queued to the head if it has ACK packet to send; (4) When selecting qps to run from the wait list, the one with the highest priority and starve_cnt will be selected; each priority will be equivalent to a fixed number of starve_cnt (16). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbsKaike Wan2019-02-061-0/+7
| | | | | | | | | | | | | | This patch integrates TID RDMA WRITE protocol into normal RDMA verbs framework. The TID RDMA WRITE protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA WRITE request into a TID RDMA WRITE request to avoid data copying on the responder side. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add the dual leg codeKaike Wan2019-02-061-4/+30
| | | | | | | | | | | | | | | | | The "Second Leg" of the TID RDMA WRITE protocol deals with the transfer of data and ack packets, which are in the KDETH PSN space, as opposed to the IB PSN space. Therefore, the Second Leg could be considered as a separate state machine. As such, it is handled by a different work queue item which is scheduled along with the normal IB state machine work item. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add TID resource timerKaike Wan2019-02-061-0/+1
| | | | | | | | | | | | This patch adds the TID resource timer, which is used by the responder to free any TID resources that are allocated for TID RDMA WRITE request and not returned by the requester after a reasonable time. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Enable TID RDMA READ protocolKaike Wan2019-02-051-0/+1
| | | | | | | | | | | | | | | | This patch enables TID RDMA READ protocol by converting a qualified RDMA READ request into a TID RDMA READ request internally: (1) The TID RDMA capability must be enabled; (2) The request must start on a 4K page boundary and all receiving buffers must start on 4K page boundaries; (3) The request length must be a multiple of 4K and must be larger or equal to 256K. Each receiving buffer length must be a multiple of 4K. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Integrate TID RDMA READ protocol into RC protocolKaike Wan2019-02-051-0/+1
| | | | | | | | | | | | | | | | | This patch integrates the TID RDMA READ protocol into the IB RC protocol. This protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA READ request into a TID RDMA READ request to avoid data copying on the requester side. The following codes are added in this patch: - Send the TID RDMA READ request; - Complete the TID RDMA READ send request; - Send the TID RDMA READ response; - Complete the TID RDMA READ request; Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: TID RDMA flow allocationKaike Wan2019-02-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The hfi1 hardware flow is a hardware flow-control mechanism for a KDETH data packet that is received on a hfi1 port. It validates the packet by checking both the generation and sequence. Each QP that uses the TID RDMA mechanism will allocate a hardware flow from its receiving context for any incoming KDETH data packets. This patch implements: (1) a function to allocate hardware flow (2) a function to free hardware flow (3) a function to initialize hardware flow generation for a receiving context (4) a wait mechanism if the hardware flow is not available (4) a function to remove the qp from the wait queue for hardware flow when the qp is reset or destroyed. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Integrate OPFN into RC transactionsKaike Wan2019-01-311-0/+13
| | | | | | | | | | | | | | | | OPFN parameter negotiation allows a pair of connected RC QPs to exchange a set of parameters in succession. This negotiation does not commence till the first ULP request. Because OPFN operations are operations private to the driver, they do not generate user completions or put the QP into error when they run out of retries. This patch integrates the OPFN protocol into the transactions of an RC QP. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2018-12-281-12/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
| * IB/hfi1: Reduce lock contention on iowait_lock for sdma and pioMike Marciniszyn2018-12-071-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4e045572e2c2 ("IB/hfi1: Add unique txwait_lock for txreq events") laid the ground work to support per resource waiting locking. This patch adds that with a lock unique to each sdma engine and pio sendcontext and makes necessary changes for verbs, PSM, and vnic to use the new locks. This is particularly beneficial for smaller messages that will exhaust resources at a faster rate. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* | IB/hfi1: Fix a latency issue for small messagesMichael J. Ruhl2018-12-031-0/+7
|/ | | | | | | | | | | | | | | | | | | A recent performance enhancement introduced a latency issue in the HFI message path. The new algorithm removed a forced call send for PIO messages and added a forced schedule event for messages larger than the MTU. For PIO, the schedule path can introduce thrashing that can significantly impact the throughput for small messages. If a message size is within the PIO threshold, always take the send path. Fixes: 0b79b27748cb ("IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of posting") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Use VL15 for SM packetsKaike Wan2018-10-011-2/+12
| | | | | | | | | | | | | | | | | | | Subnet Management Packets (SMP) should exclusively use VL15 and their SL is ignored (IBTA v1.3, Section 3.5.8.2). Therefore, when an SMP is posted, the SL in the address handle can be set to 0 by a user application. Consequently, when an address handle is created by the IB core, some fields in struct rvt_ah may not be set correctly by using the SL2SC and SC2VL tables at the time. Subsequently, when the request is post sent, the incoming swqe may fail the validation check, resulting in the rejection of the send request. This patch fixes the problem by using VL15 for any validation, ignoring the SL in the address handle. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Prepare resource waits for dual legDennis Dalessandro2018-10-011-17/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | Current implementation allows each qp to have only one send engine. As such, each qp has only one list to queue prebuilt packets when send engine resources are not available. To improve performance, it is desired to support multiple send engines for each qp. This patch creates the framework to support two send engines (two legs) for each qp for the TID RDMA protocol, which can be easily extended to support more send engines. It achieves the goal by creating a leg specific struct, iowait_work in the iowait struct, to hold the work_struct and the tx_list as well as a pointer to the parent iowait struct. The hfi1_pkt_state now has an additional field to record the current legs work structure and that is now passed to all egress waiters to determine the leg that needs to wait via a new iowait helper. The APIs are adjusted to use the new leg specific struct as required. Many new and modified helpers are added to support this change. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/rdmavt: Rename check_send_wqe as setup_wqeKaike Wan2018-10-011-3/+8
| | | | | | | | | | | | | The driver-provided function check_send_wqe allows the hardware driver to check and set up the incoming send wqe before it is inserted into the swqe ring. This patch will rename it as setup_wqe to better reflect its usage. In addition, this function is only called when all setup is complete in rdmavt. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of postingMichael J. Ruhl2018-09-111-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The post_send() path determines if it should post directly or, schedule the post for later. The current logic is: if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold post the send else schedule This can allow large requests to call the send engine directly. Large requests can potentially produce a large number of packets prior to returning to the caller, blocking the caller from posting more requests, and allowing better parallel processing. Allow the driver(s) more say in this logic (pass call_send to the driver, rather than examining a return value). Update hfi1/qib logic to schedule the send engine if an RC or UC message is larger than the QP MTU size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/rdmavt, IB/hfi1: Create device dependent s_flagsMike Marciniszyn2018-06-191-3/+3
| | | | | | | | | | | | | | | Move some s_flags defines out of rdmavt and into hfi1 because they are hfi1 specific and therefore should remain in the driver instead of bubbling up to rdmavt. Document device specific ranges in rdmavt and remap those in hfi1. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Fix a kernel-doc warningBart Van Assche2018-03-131-1/+0
| | | | | | | | | | | Avoid that building with W=1 causes the following warning to appear: drivers/infiniband/hw/hfi1/qp.c:484: warning: Cannot understand * on line 484 - I thought it was a doc line Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Remove dependence on qp->s_hdrwordsMitko Haralanov2018-02-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The s_hdrwords variable was used to indicate whether a packet was already built on a previous iteration of the send engine. This variable assumed the protection of the QP's RVT_S_BUSY flag, which was required since the the QP's s_lock was dropped just prior to the packet being queued on the one of the egress mechanisms. Support for multiple send engine instantiations require that the field not be used due to concurency issues. The ps.txreq signals the "already built" without the potential concurency issues. Fix by getting rid of all s_hdrword usage. A wrapper is added to test for the already built case that used to use s_hdrwords. What used to be stored in s_hdrwords is now in the txreq. The PBC is not counted, but is added in the pio/sdma code paths prior to posting the packet. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Add RQ/SRQ information to QP statsMichael J. Ruhl2018-01-031-2/+8
| | | | | | | | | | | | | When debugging issues with RC QPs, it is useful to know if a QP has an associated RQ or SRQ, the size of the RQ, and any RNR timeout values. Add the necessary information to the QP stats output. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* IB/hfi1: Convert qp_stats debugfs interface to use new iterator APIMike Marciniszyn2017-08-291-77/+6
| | | | | | | | | Continue moving copy/paste code into rdmavt. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Convert hfi1_error_port_qps() to use new QP iteratorMike Marciniszyn2017-08-291-38/+41
| | | | | | | | | | Change hfi1_error_port_qps() to use the new rvt_qp_iter() in its QP scanning. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Use accessor to determine ring sizeKaike Wan2017-08-291-1/+1
| | | | | | | | | | | The qp_stats print will soon be moving to rdmavt, so use the proper accessor to get the ring size rather than a driver supplied constant. Fixes: Commit ff8d836efe06 ("IB/hfi1: Add receiving queue info to qp_stats") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add opcode states to qp_statsMike Marciniszyn2017-08-291-1/+3
| | | | | | | | | These fields allow for debugging send engine processing. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add received request info to qp_statsKaike Wan2017-08-291-2/+9
| | | | | | | | | | | | The rvt_ack_entry pointed to by s_tail_ack_queue provides important info about the request that has just been processed or is being processed on the responder side of a RC connection. This patch adds this info to the qp_stats to assist debugging. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Determine 9B/16B L2 header type based on Address handleDon Hiatt2017-08-221-0/+28
| | | | | | | | | | | | | When address handle attributes are initialized, the LIDs are transformed to be in the 32 bit LID space. When constructing the header, hfi1 driver will look at the LID to determine the packet header to be created. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Serve the most starved iowait entry firstKaike Wan2017-07-311-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | When an egress resource(SDMA descriptors, pio credits) is not available, a sending thread will be put on the resource's wait queue. When the resource becomes available again, up to a fixed number of sending threads can be awakened sequentially and removed from the wait queue, depending on the number of waiting threads and the number of free resources. Since each awakened sending thread will send as many packets as possible, it is highly likely that the first sending thread will consume all the egress resources. Subsequently, it will be put back to the end of the wait queue. Depending on the timing when the later sending threads wake up, they may not be able to send any packet and be again put back to the end of the wait queue sequentially, right behind the first sending thread. This starvation cycle continues until some sending threads exceed their retry limit and consequently fail. This patch fixes the issue by two simple approaches: (1) Any starved sending thread will be put to the head of the wait queue while a served sending thread will be put to the tail; (2) The most starved sending thread will be served first. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge branch 'misc' into k.o/for-nextDoug Ledford2017-07-271-1/+5
|\
| * IB/hfi1: Add receiving queue info to qp_statsKaike Wan2017-07-241-1/+5
| | | | | | | | | | | | | | | | | | | | This patch adds qp->s_ack_queue indices and size to qp_stats printout. This information will provide information about the receiving side. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | Merge branch 'hfi1' into k.o/for-4.14Doug Ledford2017-07-241-6/+0
|\ \ | |/ |/|
| * IB/hfi1: Remove unused mk_qpn functionIra Weiny2017-06-271-6/+0
| | | | | | | | | | | | | | | | | | Leftover function that is not used. Remove it. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | IB/{rdmavt, qib, hfi1}: Remove gfp flags argumentLeon Romanovsky2017-07-181-4/+3
|/ | | | | | | | | | | | | The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache lineMike Marciniszyn2017-05-051-3/+1
| | | | | | | | | | | | This field is causing excessive cache line bouncing. There are spare bytes in the r_lock cache line so the best approach is to make an rvt QP field and remove from the hfi1 priv field. Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/core: Use rdma_ah_attr accessor functionsDasaratharaman Chandramouli2017-05-011-6/+6
| | | | | | | | | | | | Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Use new rdmavt timersVenkata Sandeep Dhanalakota2017-02-191-4/+0
| | | | | | | | | | Reduce hfi1 code footprint by using the rdmavt timers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1, qib, rdmavt: Move AETH credit functions into rdmavtBrian Welty2017-02-191-137/+0
| | | | | | | | | | Add rvt_compute_aeth() and rvt_get_credit() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1, qib, rdmavt: Move two IB event functions into rdmavtBrian Welty2017-02-191-13/+0
| | | | | | | | | | Add rvt_rc_error() and rvt_comm_est() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add additional fields to qp_statsMike Marciniszyn2017-02-191-1/+3
| | | | | | | | | | | The r_psn and s_rnr_retry are missing. Add with this patch. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Correct error calldown lockingMike Marciniszyn2017-02-191-8/+11
| | | | | | | | | | | | | | The resource specific wait locking missed correcting the lock for the notify_error_qp() calldown. The code is fixed to correctly use the iowait lock field to protect the head that is protected by that lock. Fixes: Commit 4e045572e2c2 ("IB/hfi1: Add unique txwait_lock for txreq events") Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add unique txwait_lock for txreq eventsMike Marciniszyn2016-11-151-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Profiling suggests that the read_seqbegin() in the txreq put logic is colliding with other uses of the iowait lock. The packet at a time use of this lock dictates a unique lock to avoid reader/writer collisions when the number of vTxWait events is low. In order to support a unique lock the iowait struct embedded in the QP is extended to remember the lock that protects the queue head. The QP destroy removes that QP from any wait list. It doesn't need to know the head because of the linked list API, but it does need to know the lock required to protect the head. This also opens up the wait logic to have unique per resources locks which needs to be in future refinement. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/rdmavt, IB/hfi1: Add lockdep asserts for lock debugMike Marciniszyn2016-10-021-2/+5
| | | | | | | | | | | This patch adds lockdep asserts in key code paths for insuring lock correctness. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Move iowait_init() to priv allocateMike Marciniszyn2016-10-021-7/+7
| | | | | | | | | | | | | The call is misplaced in the reset calldown function and causes issues with lockdep assertions that are to be added. Fixes: Commit a2c2d608957c ("staging/rdma/hfi1: Remove create_qp functionality") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routinesMike Marciniszyn2016-09-161-7/+4
| | | | | | | | | | This improves readability and hides the reference count mechanism from the client drivers. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1,IB/qib: Fix qp_stats sleep with rcu read lock heldMike Marciniszyn2016-08-221-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The qp init function does a kzalloc() while holding the RCU lock that encounters the following warning with a debug kernel when a cat of the qp_stats is done: [ 231.723948] rcu_scheduler_active = 1, debug_locks = 0 [ 231.731939] 3 locks held by cat/11355: [ 231.736492] #0: (debugfs_srcu){......}, at: [<ffffffff813001a5>] debugfs_use_file_start+0x5/0x90 [ 231.746955] #1: (&p->lock){+.+.+.}, at: [<ffffffff81289a6c>] seq_read+0x4c/0x3c0 [ 231.755873] #2: (rcu_read_lock){......}, at: [<ffffffffa0a0c535>] _qp_stats_seq_start+0x5/0xd0 [hfi1] [ 231.766862] The init functions do an implicit next which requires the rcu read lock before the kzalloc(). Fix for both drivers is to change the scope of the init function to only do the allocation and the initialization of the just allocated iter. The implict next is moved back into the respective start functions to fix the issue. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> CC: <stable@vger.kernel.org> # 4.6.x- Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Rename struct ahg_ib_header to struct hfi1_ahg_infoDasaratharaman Chandramouli2016-08-021-3/+4
| | | | | | | | | | | | struct ahg_ib_header has no header specific information. Rename it to struct hfi1_ahg_info Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add support for extended memory managementJianxin Xiong2016-08-021-0/+17
| | | | | | | | | | | Advertise and add the capability of handing all aspects of IBTA extended memory management support in post send. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Add hfi1 post send tablesMike Marciniszyn2016-08-021-0/+44
| | | | | | | | | | Add initial table for table driven post_send support. Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/hfi1: Fix hard lockup due to not using save/restore spin lockMike Marciniszyn2016-05-261-2/+3
| | | | | | | | | | | | | | | | | | Commit b9b06cb6feda ("IB/hfi1: Fix missing lock/unlock in verbs drain callback") added a spin lock. Unfortunately, the new lock code can be called from a base level interrupt state, and an interrupt that can get stacked will attempt to get the same lock. Fix by using the flag save/restore spin lock variation. Cc: stable@vger.kernel.org # 4.6+ Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 09:50:56 +0100