summaryrefslogtreecommitdiffstats
path: root/drivers/input/joystick (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Input: xpad - power off wireless 360 controllers on suspendCameron Gutman2016-07-281-0/+43
| | | | | | | | | | | | | | | When the USB wireless adapter is suspended, the controllers lose their connection. This causes them to start flashing their LED rings and searching for the wireless adapter again, wasting the controller's battery power. Instead, we will tell the controllers to power down when we suspend. This mirrors the behavior of the controllers when connected to the console itself and how the official Xbox One wireless adapter behaves on Windows. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - validate USB endpoint count during probeCameron Gutman2016-06-291-0/+3
| | | | | | | This prevents a malicious USB device from causing an oops. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - fix oops when attaching an unknown Xbox One gamepadCameron Gutman2016-06-231-10/+13
| | | | | | | | | | | | | | | | | | | | | Xbox One controllers have multiple interfaces which all have the same class, subclass, and protocol. One of the these interfaces has only a single endpoint. When Xpad attempts to bind to this interface, it causes an oops when trying initialize the output URB by trying to access the second endpoint's descriptor. This situation was avoided for known Xbox One devices by checking the XTYPE constant associated with the VID and PID tuple. However, this breaks when new or previously unknown Xbox One controllers are attached to the system. This change addresses the problem by deriving the XTYPE for Xbox One controllers based on the interface protocol before checking the interface number. Fixes: 1a48ff81b391 ("Input: xpad - add support for Xbox One controllers") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - fix rumble on Xbox One controllers with 2015 firmwareCameron Gutman2016-06-011-8/+8
| | | | | | | | | | | | Xbox One controllers that shipped with or were upgraded to the 2015 firmware discard the current rumble packets we send. This patch changes the Xbox One rumble packet to a form that both the newer and older firmware will accept. It is based on changes made to support newer Xbox One controllers in the SteamOS brewmaster-4.1 kernel branch. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - xbox one elite controller supportPavel Rojtberg2016-05-281-1/+2
| | | | | | | | | | | | added the according id and incresed XPAD_PKT_LEN to 64 as the elite controller sends at least 33 byte messages [1]. Verified to be working by [2]. [1]: https://franticrain.github.io/sniffs/XboxOneSniff.html [2]: https://github.com/paroj/xpad/issues/23 Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - add more third-party controllersPavel Rojtberg2016-05-281-0/+9
| | | | | | | Signed-off-by: Pierre-Loup A. Griffais <eduke32@plagman.net> Signed-off-by: Thomas Debesse <dev@illwieckz.net> Signed-off-by: aronschatz <aronschatz@aselabs.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - prevent spurious input from wired Xbox 360 controllersCameron Gutman2016-05-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | After initially connecting a wired Xbox 360 controller or sending it a command to change LEDs, a status/response packet is interpreted as controller input. This causes the state of buttons represented in byte 2 of the controller data packet to be incorrect until the next valid input packet. Wireless Xbox 360 controllers are not affected. Writing a new value to the LED device while holding the Start button and running jstest is sufficient to reproduce this bug. An event will come through with the Start button released. Xboxdrv also won't attempt to read controller input from a packet where byte 0 is non-zero. It also checks that byte 1 is 0x14, but that value differs between wired and wireless controllers and this code is shared by both. I think just checking byte 0 is enough to eliminate unwanted packets. The following are some examples of 3-byte status packets I saw: 01 03 02 02 03 00 03 03 03 08 03 00 Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - move pending clear to the correct locationPavel Rojtberg2016-05-281-1/+1
| | | | | | | otherwise we lose ff commands: https://github.com/paroj/xpad/issues/27 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - add Mad Catz FightStick TE 2 VID/PIDSilvan Jegen2016-04-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds the VID/PID combination for the Xbox One version of the Mad Catz FightStick TE 2. The functionality that this provides is about on par with what the Windows drivers for the stick manage to deliver. What works: - Digital stick - 6 main buttons - Xbox button - The two buttons on the back - The locking buttons (preventing accidental Xbox button press) What doesn't work: - Two of the main buttons (don't work on Windows either) - The "Haptic" button setting does not have an effect (not sure if it works on Windows) I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing there was no practical difference with or without. The FightStick does not have triggers though so adding it makes sense. Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - remove unused functionArnd Bergmann2016-01-281-1/+0
| | | | | | | | | | | | | There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cae705baa40b ("Input: xpad - re-send LED command on present event") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge branch 'next' into for-linusDmitry Torokhov2016-01-221-166/+425
|\ | | | | | | Prepare second round of input updates for 4.5 merge window.
| * Input: xpad - correct xbox one pad device namePavel Rojtberg2016-01-131-1/+1
| | | | | | | | | | | | | | | | | | | | Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - use LED API when identifying wireless controllersDmitry Torokhov2016-01-041-1/+1
| | | | | | | | | | | | | | | | When lighting up the segment identifying wireless controller, Instead of sending command directly to the controller, let's do it via LED API (usinf led_set_brightness) so that LED object state is in sync with controller state and we'll light up the correct segment on resume as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - workaround dead irq_out after suspend/ resumePavel Rojtberg2016-01-041-38/+137
| | | | | | | | | | | | | | | | | | | | | | | | The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - update Xbox One Force Feedback SupportPierre-Loup A. Griffais2016-01-041-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's apparently a serial number woven into both input and output packets; neglecting to specify a valid serial number causes the controller to ignore the rumble packets. The scale of the rumble was also apparently halved in the packets. The initialization packet had to be changed to allow force feedback to work. see https://github.com/paroj/xpad/issues/7 for details. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - correctly handle concurrent LED and FF requestsPavel Rojtberg2016-01-041-99/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Track the status of the irq_out URB to prevent submission iof new requests while current one is active. Failure to do so results in the "URB submitted while active" warning/stack trace. Store pending brightness and FF effect in the driver structure and replace it with the latest requests until the device is ready to process next request. Alternate serving LED vs FF requests to make sure one does not starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer [2]. [1]: http://www.spinics.net/lists/linux-input/msg40708.html [2]: http://www.spinics.net/lists/linux-input/msg31450.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - handle "present" and "gone" correctlyPierre-Loup A. Griffais2015-12-171-38/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Handle the "a new device is present" message properly by dynamically creating the input device at this point in time. This means we now do not "preallocate" all 4 devices when a single wireless base station is seen. This requires a workqueue as we are in interrupt context when we learn about this. Also properly disconnect any devices that we are told are removed. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - remove spurious events of wireless xpad 360 controllerClement Calmels2015-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When powering up a wireless xbox 360 controller, some wrong joystick events are generated. It is annoying because, for example, it makes unwanted moves in Steam big picture mode's menu. When my controller is powering up, this packet is received by the driver: 00000000: 00 0f 00 f0 00 cc ff cf 8b e0 86 6a 68 f0 00 20 ...........jh.. 00000010: 13 e3 20 1d 30 03 40 01 50 01 ff ff .. .0.@.P... According to xboxdrv userspace driver source code, this packet is only dumping a serial id and should not be interpreted as joystick events. This issue can be easily seen with jstest: $ jstest --event /dev/input/js0 This patch only adds a way to filter out this "serial" packet and as a result it removes the spurous events. Signed-off-by: Clement Calmels <clement.calmels@free.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge branch 'next' into for-linusDmitry Torokhov2016-01-121-2/+2
|\| | | | | | | Prepare first round of input updates for 4.5 merge window.
| * remove abs64()Andrew Morton2015-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Input: walkera0701 - clear unused function pointersSudip Mukherjee2015-11-171-0/+1
| | | | | | | | | | | | | | | | | | walkera0701_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 221bcb24c653 ("Input: walkera0701 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: turbografx - clear unused function pointersSudip Mukherjee2015-11-171-0/+1
| | | | | | | | | | | | | | | | | | tgfx_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: gamecon - clear unused function pointersSudip Mukherjee2015-11-171-0/+1
| | | | | | | | | | | | | | | | | | gc_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: db9 - clear unused function pointersSudip Mukherjee2015-11-171-0/+1
|/ | | | | | | | | db9_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - fix clash of presence handling with LED settingPavel Rojtberg2015-10-191-2/+9
| | | | | | | | Do not call xpad_identify_controller at init with wireless devices: it conflicts with the already sent presence packet and will be called by xpad360w_process_packet as needed anyway. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - query wireless controller state at initPavel Rojtberg2015-10-101-0/+40
| | | | | | | | | | | | | When we initialize the driver/device, we really don't know how many controllers are connected. So send a "query presence" command to the base-station. (Command discovered by Zachary Lund) Presence packet taken from: https://github.com/computerquip/xpad5 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - move the input device creation to a new functionPierre-Loup A. Griffais2015-10-101-92/+119
| | | | | | | | | | | To allow us to later create / destroy the input device from the urb callback, we need to initialize/ deinitialize the input device from a separate function. So pull that logic out now to make later patches more "obvious" as to what they do. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - x360w: report dpad as buttons and axesPavel Rojtberg2015-10-101-2/+20
| | | | | | | | | | | | | | | as discussed here[0], x360w is the only pad that maps dpad_to_button. This is bad for downstream developers as they have to differ between x360 and x360w which is not intuitive. This patch implements the suggested solution of exposing the dpad both as axes and as buttons. This retains backward compatibility with software already dealing with the difference while makes new software work as expected across x360/ x360w pads. [0] http://www.spinics.net/lists/linux-input/msg34421.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - factor out URB submission in xpad_play_effectPavel Rojtberg2015-10-101-71/+69
| | | | | | | Move submission logic to a single point at the end of the function. This makes it easy to add locking/ queuing code later on. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - remove needless bulk out URB used for LED setupPavel Rojtberg2015-10-101-78/+1
| | | | | | | | | | | | | This code was probably wrong ever since and is redundant with xpad_send_led_command. Both try to send a similar command to the xbox360 controller. However xpad_send_led_command correctly uses the pad_nr instead of bInterfaceNumber to select the led and re-uses the irq_out URB instead of creating a new one. Note that this change only affects the two supported wireless controllers. Tested using the xbox360 wireless controller (PC). Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - use ida() for finding the pad_nrPavel Rojtberg2015-10-101-12/+20
| | | | | | | | | | | | | | | | | | | The pad_nr corresponds to the lit up LED on the controller. Therefore there should be no gaps when enumerating. Currently a LED is only re-assigned after a controller is re-connected 4 times. This patch uses ida to track connected pads - this way we can re-assign freed up pad number immediately. Consider the following case: 1. pad A is connected and gets pad_nr = 0 2. pad B is connected and gets pad_nr = 1 3. pad A is disconnected 4. pad A is connected again using ida_simple_get() controller A now correctly gets pad_nr = 0 again. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - clarify LED enumerationPavel Rojtberg2015-10-101-7/+9
| | | | | | | Rename led_no -> pad_nr: the number stored there is not the LED number - it gets translated later on to a LED number in xpad_identify_controller; Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - fix Razer Atrox Arcade Stick button mappingDario Scarpa2015-10-101-1/+1
| | | | | | | | | The "Razer Atrox Arcade Stick" features 10 buttons, and two of them (LT/RT) don't work properly. Change its definition in xpad_device[] (mapping field) to fix. Signed-off-by: Dario Scarpa <dario.scarpa@duskzone.it> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: xpad - add Covert Forces edition of the Xbox One controllerErik Lundgren2015-10-101-0/+1
| | | | | | It is identical to the Xbox One controller but has a different product ID. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge tag 'v4.3-rc4' into nextDmitry Torokhov2015-10-062-2/+3
|\ | | | | | | Merge with mainline to sync up with changes to parkbd driver.
| * Merge branch 'for-linus' of ↵Linus Torvalds2015-10-021-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for two recent regressions (in Synaptics PS/2 and uinput drivers) and some more driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - fix handling of disabling gesture mode" Input: psmouse - fix data race in __ps2_command Input: elan_i2c - add all valid ic type for i2c/smbus Input: zhenhua - ensure we have BITREVERSE Input: omap4-keypad - fix memory leak Input: serio - fix blocking of parport Input: uinput - fix crash when using ABS events Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF Input: elan_i2c - add ic type 0x03 Input: elan_i2c - don't require known iap version Input: imx6ul_tsc - fix controller name Input: imx6ul_tsc - use the preferred method for kzalloc() Input: imx6ul_tsc - check for negative return value Input: imx6ul_tsc - propagate the errors Input: walkera0701 - fix abs() calculations on 64 bit values Input: mms114 - remove unneded semicolons Input: pm8941-pwrkey - remove unneded semicolon Input: fix typo in MT documentation Input: cyapa - fix address of Gen3 devices in device tree documentation
| | * Input: zhenhua - ensure we have BITREVERSEAndrew Morton2015-09-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * Input: walkera0701 - fix abs() calculations on 64 bit valuesDmitry Torokhov2015-09-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | abs() function can not be used with 64 bit values, so let's switch to abs64(). From include/linux/kernel.h: /* * abs() handles unsigned and signed longs, ints, shorts and chars. * For all input types abs() returns a signed long. * abs() should not be used for 64-bit types (s64, u64, long long) * - use abs64() for those. */ Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSEAndrew Morton2015-10-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Cc: Fengguang Wu <fengguang.wu@gmail.com> Cc: yalin wang <yalin.wang2010@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Input: turbografx - store object in correct indexSudip Mukherjee2015-10-061-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The variable i is used to check the port to attach to and we are supposed to save the reference of struct tgfx in the location given by tgfx_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. Fixes: 4de27a638a99 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: gamecon - store object at correct indexSudip Mukherjee2015-10-061-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The variable i is used to check the port to attach to and we are supposed to save the reference of struct gc in the location given by gc_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a517e87c3dfc ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: db9 - store object at correct indexSudip Mukherjee2015-10-061-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The variable i is used to check the port to attach to and we are supposed to save the reference of struct db9 in the location given by db9_base[i]. But after finding out the index, i is getting modified again so we saved in a wrong index. While at it mark db9_base[i] as NULL after it is freed. Fixes: 2260c419b52b ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Merge tag 'v4.3-rc3' into nextDmitry Torokhov2015-09-302-3/+3
|\| | | | | | | | | | | | | | Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062 OnKey driver.
| * | Merge branch 'for-linus' of ↵Linus Torvalds2015-09-041-11/+2
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Drivers, drivers, drivers... No interesting input core changes this time" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits) Input: elan_i2c - use iap_version to get firmware information Input: max8997_haptic - fix module alias Input: elan_i2c - fix typos for validpage_count Input: psmouse - add small delay for IBM trackpoint pass-through mode Input: synaptics - fix handling of disabling gesture mode Input: elan_i2c - enable ELAN0100 acpi panels Input: gpio-keys - report error when disabling unsupported key Input: sur40 - fix error return code Input: sentelic - silence some underflow warnings Input: zhenhua - switch to using bitrev8() Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency Input: cap11xx - add LED support Input: elants_i2c - fix for devm_gpiod_get API change Input: elan_i2c - enable asynchronous probing Input: elants_i2c - enable asynchronous probing Input: elants_i2c - wire up regulator support Input: do not emit unneeded EV_SYN when suspending Input: elants_i2c - disable idle mode before updating firmware MAINTAINERS: Add maintainer for atmel_mxt_ts Input: atmel_mxt_ts - remove warning on zero T44 count ...
| | * Merge branch 'next' into for-linusDmitry Torokhov2015-09-031-11/+2
| | |\ | | | | | | | | | | | | Prepare first round of input updates for 4.3 merge window.
| * | | Merge branch 'x86/urgent' into x86/asm to fix up conflicts and to pick up fixesIngo Molnar2015-08-181-1/+1
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/x86/entry/entry_64_compat.S arch/x86/math-emu/get_address.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | Input: turbografx - fix potential out of bound accessDmitry Torokhov2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch 17dd3f0f7aa7: "[PATCH] drivers/input/joystick: convert to dynamic input_dev allocation" from Sep 15, 2005, leads to the following static checker warning: drivers/input/joystick/turbografx.c:235 tgfx_probe() error: buffer overflow 'tgfx_buttons' 5 <= 5 drivers/input/joystick/turbografx.c 195 for (i = 0; i < n_devs; i++) { 196 if (n_buttons[i] < 1) 197 continue; 198 199 if (n_buttons[i] > 6) { ^^^^^^^^^^^^^^^^ Possibly off by one. >= 6. Let's change the upper value to ARRAY_SIZE(tgfx_buttons) to ensure we do not reach past the end of the array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | x86/asm/tsc: Rename native_read_tsc() to rdtsc()Andy Lutomirski2015-07-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that there is no paravirt TSC, the "native" is inappropriate. The function does RDTSC, so give it the obvious name: rdtsc(). Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/fd43e16281991f096c1e4d21574d9e1402c62d39.1434501121.git.luto@kernel.org [ Ported it to v4.2-rc1. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | x86/asm/tsc, input/joystick/analog: Switch from rdtscl() to native_read_tsc()Andy Lutomirski2015-07-061-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This timing code is hideous, and this doesn't help. It gets rid of one of the last users of rdtscl(), though. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/90d19b3cea0e05ca6f333d1598daa38afb993260.1434501121.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | Input: walkera0701 - use parallel port device modelSudip Mukherjee2015-09-301-27/+37
| | | | | | | | | | | | | | | | | | Modify walkera0701 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 07:03:57 +0100