summaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse/elantech.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Input: elantech - Prepare a complete software node for the deviceHeikki Krogerus2021-04-101-2/+4
| | | | | | | | | | | | | | | | | Creating a software node and supplying that for the device instead of only the device properties in it. A software node was always created in any case to hold the additional device properties, so this change does not have any real effect. This change makes it possible to remove support for the problematic "dangling" device properties from i2c subsystem, i.e. the "properties" member from struct i2c_board_info. The problems caused by them are not related to this driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Input: elantech - fix protocol errors for some trackpoints in SMBus modejingle.wu2020-12-111-2/+97
| | | | | | | | | | | | There are some version of Elan trackpads that send incorrect data when in SMbus mode, unless they are switched to use 0x5f reports instead of standard 0x5e. This patch implements querying device to retrieve chips identifying data, and switching it, when needed to the alternative report. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20201211071531.32413-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - demote obvious abuse of kernel-doc headerLee Jones2020-11-091-1/+1
| | | | | | | | | | | | Fixes the following W=1 kernel build warning(s): drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'psmouse' not described in 'elantech_setup_smbus' drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'info' not described in 'elantech_setup_smbus' drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'leave_breadcrumbs' not described in 'elantech_setup_smbus' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-13-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-07-071-4/+2
| | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedor Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - remove redundant assignments to variable errorColin Ian King2020-07-071-3/+3
| | | | | | | | | | | The variable error is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603140431.131347-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Revert "Input: elantech - enable SMBus on new (2018+) systems"Kai-Heng Feng2019-10-161-26/+29
| | | | | | | | | | | | | | | | | | This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c. Apparently use dmi_get_bios_year() as manufacturing date isn't accurate and this breaks older laptops with new BIOS update. So let's revert this patch. There are still new HP laptops still need to use SMBus to support all features, but it'll be enabled via a whitelist. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - annotate fall-through case in elantech_use_host_notify()Dmitry Torokhov2019-07-241-0/+1
| | | | | | | This avoids a warning when building with -Wimplicit-fallthrough. Fixes: 883a2a80f79c ("Input: elantech - enable SMBus on new (2018+) systems") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - enable SMBus on new (2018+) systemsKai-Heng Feng2019-07-231-29/+25
| | | | | | | | | | | | | | | | | There are some new HP laptops with Elantech touchpad that don't support multitouch. Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported, but in addition to firmware version, the bus type also informs us whether the IC can support SMBus. To avoid breaking old ICs, we will only enable SMbus support based the bus type on systems manufactured after 2018. Lastly, let's consolidate all checks into elantech_use_host_notify() and use it to determine whether to use PS/2 or SMBus. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge tag 'v5.2' into nextDmitry Torokhov2019-07-151-4/+1
|\ | | | | | | Sync up with mainline to resolve conflicts in iforce driver.
| * Merge tag 'spdx-5.2-rc6' of ↵Linus Torvalds2019-06-211-4/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...
| | * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Input: elantech - remove P52 and P72 from SMBus blacklistBenjamin Tissoires2019-05-281-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Both now works correctly over SMBus. Let's use this driver so we can update all five fingers every 8ms. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: elantech/SMBus - export all capabilities from the PS/2 nodeBenjamin Tissoires2019-05-281-5/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent touchpads might not have all the information regarding the characteristics through the I2C port. On some Lenovo t480s, this results in the touchpad not being detected as a clickpad, and on the Lenovo P52, this results in a failure while fetching the resolution through I2C. We need to imitate the Windows behavior: fetch the data under PS/2, and limit the querries under I2C. This patch prepares this by exporting the info from PS/2. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: elantech - detect middle button based on firmware versionBenjamin Tissoires2019-05-281-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like the new generation of Lenovo machine also need to be added to the PnPID whitelist. This is definitively not going to scale, as there is nothing that tells us currently if a touchpad supports a true physical middle button. Consider that all new touchpads that are not clickpads (so matching ETP_NEW_IC_SMBUS_HOST_NOTIFY) are handling 3 physical buttons. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: elantech - add helper function elantech_is_buttonpad()Benjamin Tissoires2019-05-281-44/+49
| | | | | | | | | | | | | | | | | | | | | | | | We check for this bit all over the code, better have it defined once for all. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: elantech - query the min/max information beforehand tooBenjamin Tissoires2019-05-281-86/+74
|/ / | | | | | | | | | | | | | | | | | | For the latest generation of Elantech touchpads, we need to forward the min/max information from PS/2 to SMBus. Prepare this work by fetching the information before creating the SMBus companion device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* / Input: elantech - enable middle button support on 2 ThinkPadsAaron Ma2019-05-211-0/+2
|/ | | | | | | Adding 2 new touchpad PNPIDs to enable middle button support. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780Matti Kurkela2019-02-081-0/+9
| | | | | | | | | | | | | | Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - disable elan-i2c for P52 and P72Benjamin Tissoires2018-12-211-2/+16
| | | | | | | | | | | | | | | | | | | | The current implementation of elan_i2c is known to not support those 2 laptops. A proper fix is to tweak both elantech and elan_i2c to transmit the correct information from PS/2, which would make a bad candidate for stable. So to give us some time for fixing the root of the problem, disable elan_i2c for the devices we know are not behaving properly. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600 Link: https://bugs.archlinux.org/task/59714 Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - enable middle button of touchpad on ThinkPad P72Aaron Ma2018-09-191-0/+2
| | | | | | | Adding 2 new touchpad IDs to support middle button support. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge branch 'next' into for-linusDmitry Torokhov2018-08-161-1/+1
|\ | | | | | | Prepare input updates for 4.19 merge window.
| * Input: mark expected switch fall-throughsGustavo A. R. Silva2018-08-081-1/+1
| | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: elantech - fix V4 report decoding for module with middle key???2018-06-221-1/+1
| | | | | | | | | | | | | | | | | | Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: elantech - enable middle button of touchpads on ThinkPad P52Aaron Ma2018-06-221-1/+8
|/ | | | | | | | | | PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: psmouse-smbus - allow to control psmouse_deactivateBenjamin Tissoires2018-05-241-1/+1
| | | | | | | | | | | This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - detect new ICs and setup Host Notify for themBenjamin Tissoires2018-05-241-4/+7
| | | | | | | | | | | | | New ICs are using a different scheme for the alternate bus parameter. Given that they are new and are only using either PS2 only or PS2 + SMBus Host Notify, we force those new ICs to use the SMBus solution for enhanced reporting. This allows the touchpad found on the Lenovo T480s to report 5 fingers every 8 ms, instead of having a limit of 2 every 8 ms. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - add support for SMBus devicesBenjamin Tissoires2018-05-241-4/+184
| | | | | | | | | | | | | | | Many of the Elantech devices are connected through PS/2 and a different bus (SMBus or plain I2C). To not break any existing device, we only enable SMBus based on a module parameter. If some laptops require the quirk to be set, we will have to rely on a list of PNPIds or MDI matching to individually expose those hardware over SMBus. the parameter mentioned above is elantech_smbus from the psmouse module. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - query the resolution in query_infoBenjamin Tissoires2018-05-241-12/+15
| | | | | | | | | The command ETP_RESOLUTION_QUERY also contains the bus information. It is better to fetch it once, while we are querying for device information. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - split device info into a separate structureBenjamin Tissoires2018-05-241-113/+158
| | | | | | | | | | | In preparation for SMBus device support, move static device information that we query form the touchpad upon initialization into separate structure. This will allow us to query the device without allocating memory first. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: psmouse - move sliced command implementation to libps2Dmitry Torokhov2018-02-031-6/+6
| | | | | | | | In preparation to adding some debugging statements to PS/2 control sequences let's move psmouse_sliced_command() into libps2 and rename it to ps2_sliced_command(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: psmouse - create helper for reporting standard buttons/motionDmitry Torokhov2018-02-031-18/+10
| | | | | | | | Many protocol driver re-implement code to parse buttons or motion data from the standard PS/2 protocol. Let's split the parsing into separate functions and reuse them in protocol drivers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - add new icbody type 15Aaron Ma2017-11-271-1/+1
| | | | | | | The touchpad of Lenovo Thinkpad L480 reports it's version as 15. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - make arrays debounce_packet static, reduces object code sizeColin Ian King2017-09-111-2/+6
| | | | | | | | | | | | | | | Don't populate the arrays debounce_packet on the stack, instead make them static. Makes the object code smaller by over 870 bytes: Before: text data bss dec hex filename 30553 9152 0 39705 9b19 drivers/input/mouse/elantech.o After: text data bss dec hex filename 29521 9312 0 38833 97b1 drivers/input/mouse/elantech.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge branch 'bind_unbind' of ↵Dmitry Torokhov2017-07-251-0/+16
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next This brings in devm_device_add_group() and friends so that we can create driver-specific device attributes as managed resources.
| * Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabledUlrik De Bie2017-06-071-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | The Lifebook E546 and E557 touchpad were also not functioning and worked after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add them to the list of machines that need this workaround. Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Reviewed-by: Arjan Opmeer <arjan@opmeer.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: elantech - constify attribute_group structuresArvind Yadav2017-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 16815 1424 0 18239 473f drivers/input/mouse/elantech.o File size After adding 'const': text data bss dec hex filename 16879 1360 0 18239 473f drivers/input/mouse/elantech.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge tag 'v4.12-rc3' into nextDmitry Torokhov2017-05-301-0/+8
|\| | | | | | | | | Sync with mainline to bring in changes in platform drovers dropping calls to sparse_keymap_free() so that we can remove it for good.
| * Input: elantech - add Fujitsu Lifebook E547 to force crc_enabledThorsten Leemhuis2017-04-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Temporary got a Lifebook E547 into my hands and noticed the touchpad only works after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add it to the list of machines that need this workaround. Cc: stable@vger.kernel.org Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: elantech - force relative mode on a certain moduleKT Liao2017-05-121-0/+11
|/ | | | | | | | One of Elan modules with sample version is 0x74 and hw_version is 0x03 has a bug in absolute mode implementation, so let it run in default PS/2 relative mode. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: mouse - use local variables consistentlyGuenter Roeck2017-01-221-1/+1
| | | | | | | | If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - add Fujitsu Lifebook E556 to force crc_enabledDmitry Torokhov2016-10-081-2/+9
| | | | | | | | | | | | | Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Also let's reorder elantech_dmi_force_crc_enabled list so LIfebook enries are in alphabetical order. Reported-by: William Linna <william.linna@gmail.com> Tested-by: William Linna <william.linna@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - force needed quirks on Fujitsu H760Matti Kurkela2016-10-041-0/+14
| | | | | | | | | | | | | Just like Fujitsu CELSIUS H730, the H760 also has an Elantech touchpad with the same quirks. Without this patch, the touchpad is useless out-of-the-box as the mouse pointer won't move. This patch makes the driver aware of both the crc_enabled=1 requirement and the middle button, making the touchpad fully functional out-of-the-box. Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - fix Lenovo version typoMarcos Paulo de Souza2016-10-041-1/+1
| | | | | | Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - fix debug dump of the current packetBenjamin Tissoires2016-08-031-6/+2
| | | | | | | | The use of mixed psmouse_printk() and printk creates 2 lines in the log, while the use of %*ph solves everything. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge branch 'for-linus' into nextDmitry Torokhov2016-07-191-7/+1
|\ | | | | | | Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.
| * Input: elantech - add more IC body types to the listDmitry Torokhov2016-06-231-7/+1
| | | | | | | | | | | | | | | | | | | | | | The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: psmouse - use same format for secondary devices as for primaryPali Rohár2016-06-191-1/+1
|/ | | | | | | | This patch changes name of secondary psmouse devices to mach format of primary device. Format of primary device is "protocol vendor name" and is set by function psmouse_switch_protocol() in file psmouse-base.c. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - mark protocols v2 and v3 as semi-mtBenjamin Tissoires2016-01-121-1/+1
| | | | | | | | | | | | | | | | | | When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - add Fujitsu Lifebook U745 to force crc_enabledTakashi Iwai2015-11-061-0/+7
| | | | | | | | | Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: elantech - add special check for fw_version 0x470f01 touchpadDuson Lin2015-08-071-2/+20
| | | | | | | | | It is no need to check the packet[0] for sanity check when doing elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. Signed-off by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-07 04:29:48 +0100