summaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'for-linus' of ↵Linus Torvalds2015-04-212-12/+131
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input subsystem updates from Dmitry Torokhov: - an update to Atmel MXT driver that makes it functional on Google Pixel 2 boxes (both touchpad and touchscreen) - a new VMware VMMouse driver that should allow us drop X vmmouse driver that requires root privileges (since it accesses ioports) - XBox One controllers now support force feedback (rumble) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: lm8333 - fix broken email address Input: cyapa - fix setting suspend scan rate Input: elan_i2c - fix calculating number of x and y traces. Input: elan_i2c - report hovering contacts Input: elants_i2c - zero-extend hardware ID in firmware name Input: alps - document separate pointstick button bits for V2 devices Input: atmel_mxt_ts - add support for Google Pixel 2 Input: xpad - add rumble support for Xbox One controller Input: ff-core - use new debug macros Input: add vmmouse driver Input: elan_i2c - adjust for newer firmware pressure reporting
| * Input: elants_i2c - zero-extend hardware ID in firmware nameDmitry Torokhov2015-04-201-1/+1
| | | | | | | | | | | | | | | | | | Let's zero-extend hardware id number when forming firmware file name, to avoid kernel requesting firmware like "elants_i2c_ 0.bin", which is quite unexpected. Acked-by: Charlie Mooney<charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: atmel_mxt_ts - add support for Google Pixel 2Dmitry Torokhov2015-04-151-11/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change allows atmel_mxt_ts to bind to ACPI-enumerated devices in Google Pixel 2 (2015). While newer version of ACPI standard allow use of device-tree-like properties in device descriptions, the version of ACPI implemented in Google BIOS does not support them, and we have to resort to DMI data to specify exact characteristics of the devices (touchpad vs. touchscreen, GPIO to button mapping, etc). Pixel 1 continues to use i2c devices and platform data created by chromeos-laptop driver, since ACPI does not enumerate them. Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge branch 'drm-next-merged' of ↵Mauro Carvalho Chehab2015-04-2114-89/+1659
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~airlied/linux into v4l_for_linus * 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits) media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format hexdump: avoid warning in test function fs: take i_mutex during prepare_binprm for set[ug]id executables smp: Fix error case handling in smp_call_function_*() iommu-common: Fix PARISC compile-time warnings sparc: Make LDC use common iommu poll management functions sparc: Make sparc64 use scalable lib/iommu-common.c functions Break up monolithic iommu table/lock into finer graularity pools and lock sparc: Revert generic IOMMU allocator. tools/power turbostat: correct dumped pkg-cstate-limit value tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL tools/power turbostat: correct DRAM RAPL units on recent Xeon processors tools/power turbostat: Initial Skylake support tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile tools/power turbostat: modprobe msr, if needed tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2 tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names Bluetooth: hidp: Fix regression with older userspace and flags validation config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected perf/x86/intel/pt: Fix and clean up error handling in pt_event_add() ... That solves several merge conflicts: Documentation/DocBook/media/v4l/subdev-formats.xml Documentation/devicetree/bindings/vendor-prefixes.txt drivers/staging/media/mn88473/mn88473.c include/linux/kconfig.h include/uapi/linux/media-bus-format.h The ones at subdev-formats.xml and media-bus-format.h are not trivial. That's why we opted to merge from DRM.
| * Input: atmel_mxt_ts - split out touchpad initialisation logicSjoerd Simons2015-04-061-22/+30
| | | | | | | | | | | | | | | | | | | | | | If the "linux,gpio-keymap" DT property is defined, the T19 keys are configured and the device is setup as a touchpad rather than a touchscreen. The logic is part of the input device initialization routine but it can be factored out to its own function to simplify the former. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: atmel_mxt_ts - implement support for T100 touch objectNick Dyer2015-04-061-27/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the new T100 object which replaces the previous T9 multitouch touchscreen object in recent maXTouch devices. T100 provides improved reporting with selectable auxiliary information, and a type field for hover/stylus/glove reporting. The hovering finger support was based on Chung-Yih's work in the ChromiumOS downstream kernel: https://chromium-review.googlesource.com/#/c/219280/ Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> [javier: Factor out T9 and T100 init functions and rework hover support] Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: tsc2007 - Convert msecs to jiffies only onceAaron Sierra2015-03-311-6/+5
| | | | | | | | | | | | | | | | Eliminate redundant calculations by performing millisecond to jiffy calculations once during driver initialization. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - remove EV_SYN event reportMaxime Ripard2015-03-241-1/+0
| | | | | | | | | | | | | | | | | | | | input_register_device already sets the EV_SYN event since all devices can generate them. Remove the redundant affectation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: edt-ft5x06 - allow to setting the maximum axes value through the DTMaxime Ripard2015-03-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver relies on some obscure and undocumented register to set the maximum axis value. The reported value is way too high to be meaningful, which confuses some userspace tools like QT's evdevtouch plugin which try to scale the reported events to the maximum values. Use the values from the DT to set meaningful values. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: of_touchscreen - register multitouch axesMaxime Ripard2015-03-241-5/+17
| | | | | | | | | | | | | | | | | | | | So far, the DT parsing code was only setting up the regular input axes, completely ignoring their multitouch counter parts. Fill them with the same parameters than the regular axes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: of_touchscreen - rework the DT parsing functionMaxime Ripard2015-03-241-10/+40
| | | | | | | | | | | | | | | | | | The DT parsing function currently duplicates a lot of the code to parse the touchscreen DT properties. In order to ease further additions to this parsing routine, rework it slightly to create new helper functions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: add support for ChipOne icn8318 based touchscreensHans de Goede2015-03-243-0/+330
| | | | | | | | | | | | | | | | The ChipOne icn8318 is an i2c capacitive touchscreen controller typically used in cheap android tablets, this commit adds a driver for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: usbtouchscreen - add new model from IRTOUCHSYSTEMSLars Poeschel2015-03-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | This adds support for another model of IRTOUCH SYSTEMS Co.,LtD infrared touchscreens. The USB vendorID/deviceID is 6615/0012. It is also sold under the label "Elektrosil". The datasheet states that coordinates for x and y are in the range from 0 to 32767. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: add Broadcom iProc touchscreen driverJonathan Richardson2015-03-233-0/+535
| | | | | | | | | | | | | | | | | | | | Add initial version of the Broadcom touchscreen driver. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Merge tag 'v4.0-rc5' into nextDmitry Torokhov2015-03-231-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | Merge with the latest upstream to synchronize Synaptics changes and bring in new infrastructure pieces. Conflicts: drivers/input/mouse/synaptics.c
| | * Input: sun4i-ts - add thermal driver dependencyArnd Bergmann2015-03-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sun4i-ts driver has had a dependency on the thermal code with the addition of the thermal zone sensor support, but this is not currently enforced in Kconfig, so with TOUCHSCREEN_SUN4I=y, THERMAL=m and THERMAL_OF=y we get drivers/built-in.o: In function `sun4i_ts_remove': :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `sun4i_ts_probe': :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' We need the dependency on THERMAL in order to ensure that this driver becomes a loadable module if the thermal support itself is modular, while the dependency on THERMAL_OF is a runtime dependency and the driver will still build if it is missing. It is entirely possible to build sun4i-ts without THERMAL_OF just to use the hwmon sensors and/or touchscreen. Fixes: 223697107949 ("Input: sun4i-ts - add thermal zone sensor support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [wens@csie.org: Fix description and Kconfig dependencies] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: sun4i-ts - allow controlling filter and sensitivity via DTJens Thiele2015-03-231-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces two new optional device-tree properties: "tp-sensitive-adjust": adjust sensitivity of pen down detection "filter-type": select median and averaging filter The previous fixed defaults, didn't work well for the Olimex A13-LCD10TS (I have). Signed-off-by: Jens Thiele <karme@karme.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: constify of_device_id arraysFabian Frederick2015-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | of_device_id is always used as const argument (See driver.of_match_table and open firmware functions). Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: sun4i-ts - really fix A10 temperature reportingHans de Goede2015-03-121-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit titled: "Input: sun4i-ts - A10 (sun4i) has a different temperature curve" contains a math error, the offset it uses is in degrees, but the actual code applies the offset before multiplying by stepsize :| Given that this is rather backwards (every math course ever thought applies the multiplication before the offset for linear functions), this commit fixes things by changing the code applying the offset to do the logical thing, adjusting the offset for the other models accordingly. This has been tested on an A10, A13, A20 and A31 to make sure everything really is correct now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: sx8654 - signedness bug in sx8654_irq()Dan Carpenter2015-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | "irqsrc" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: elants_i2c - append hw_version to FW fileCharlie Mooney2015-03-111-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the elants_i2c driver simply requests a static filename /lib/firmware/elants_i2c.bin when it gets firmware updates. This is a problem if you have two Elan touchscreens using the same driver. If both touchscreens have different firmwares, you would need to move the files around in your filesystem when you're updating them so that they don't get updated with the other's FW. If you have a read-only filesystem then this is impossible, even. This patch changes the elants_i2c driver to automatically append the four-hex-digit hw_version of the device onto the name of the FW file it's requesting for update. Since different touchscreens should have a different hw_version's this means the user needs to append the hw version of the touchscreen he or she intends to update onto the end of the firmware filename and then the driver will do the rest. The firmware filenames it looks for now are of the form: elants_i2c_${HW_VERSION}.bin eg: elants_i2c_2a44.bin Signed-off-by: Charlie Mooney <charliemooney@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: sun4i-ts - A10 (sun4i) has a different temperature curveHans de Goede2015-03-081-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing has revealed that the temperature in the rtp controller of the A10 (sun4i) SoC has a different curve then on the A13 (sun5i) and later models. Add a new sun5i-a13-ts compatible to differentiate the newer models and set the curve based on the compatible string. The new curve is still not ideal on all A10-s, that seems to have to do with there being a large spread between different A10-s out there, the new curve us based on callibration results on 4 completely different models: raw min raw max temp min temp max stepsize offset Tong Zhang's hackberry 2402 2680 45.0 80.0 0.125 -255.3 Hansg's Cubieboard 2207 2300 36.0 45.0 0.096 -175.8 Olliver's lime 1 (*): 2258 2537 48.3 87.1 0.139 -265.7 Olliver's lime 2 (*): 2222 2486 46.7 91.7 0.170 -331.0 *) from: http://linux-sunxi.org/Temperature_Calibration Average all 4: 0.133 -257.0 Average without outliers (middle 2): 0.132 -261.0 Since it is better to slightly overreport the temperature this patch uses the average of all 4 as curve. This fixes the temperature reported on the A10 being much higher then expected. Reported-by: Tong Zhang <lovewilliam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: add support for Semtech SX8654 I2C touchscreen controllerSébastien Szymanski2015-03-073-0/+298
| | | | | | | | | | | | | | | Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: goodix - add device tree supportAleksei Mamlin2015-03-072-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds device tree support and binding information for Goodix GT9xx series touchscreen controller. It also adds support for 5-finger chips, like GT911 and GT912, which can be found on ARM tablets, such as Wexler TAB7200 and MSI Primo73. Datasheets can be found here: https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Input: goodix - use max touch number from device configAleksei Mamlin2015-03-071-6/+9
| |/ | | | | | | | | | | | | | | | | | | Use max number of touches from device config instead of hardcoding. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Tested-by: Bastien Nocera <hadess@hadess.net> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | [media] sur40: fix occasional hard freeze due to buffer queue underrunFlorian Echtler2015-04-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a kernel panic which occurs when buf_list is empty. This can happen occasionally when user space is under heavy load (e.g. due to image processing on the CPU) and new buffers aren't re-queued fast enough. In that case, vb2_start_streaming_called can return true, but when the spinlock is taken and sur40_poll attempts to fetch the next buffer from buf_list, the list is in fact empty. This patch needs to be applied on top of the queued one adding V4L2 support to the sur40 driver. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] add raw video stream support for Samsung SUR40Florian Echtler2015-04-032-12/+419
|/ | | | | | | | | | | | This patch adds raw video support for the Samsung SUR40 using vbuf2-dma-sg. All tests from v4l2-compliance pass. Support for VB2_USERPTR is currently disabled due to unexpected interference with dma-sg buffer sizes. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix compile warning: %ld -> %zd] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Input: ti_am335x_tsc - replace delta filtering with median filteringVignesh R2015-02-031-40/+52
| | | | | | | | | | | | | Previously, delta filtering was applied TSC co-ordinate readouts before reporting a single value to user space. This patch replaces delta filtering with median filtering. Median filtering sorts co-ordinate readouts, drops min and max values, and reports the average of remaining values. This method is more sensible than delta filtering. Median filtering is applied only if number of readouts is greater than 3 else just average of co-ordinate readouts is reported. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ti_am335x_tsc - read charge delay from DTVignesh R2015-02-031-1/+13
| | | | | | | | | This patch reads charge delay from tsc DT node and writes to REG_CHARGEDELAY register. If the charge delay is not specified in DT then default value of 0x400(CHARGEDLY_OPENDLY) is used. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ti_am335x_tsc - remove udelay in interrupt handlerBrad Griffis2015-02-031-36/+31
| | | | | | | | | | | | | | | | | | | | | | | TSC interrupt handler had udelay to avoid reporting of false pen-up interrupt to user space. This patch implements workaround suggesting in Advisory 1.0.31 of silicon errata for am335x, thus eliminating udelay and touchscreen lag. This also improves performance of touchscreen and eliminates sudden jump of cursor at touch release. IDLECONFIG and CHARGECONFIG registers are to be configured with same values in order to eliminate false pen-up events. This workaround may result in false pen-down to be detected, hence considerable charge step delay needs to be added. The charge delay is set to 0xB000 (in terms of ADC clock cycles) by default. TSC steps are disabled at the end of every sampling cycle and EOS bit is set. Once the EOS bit is set, the TSC steps need to be re-enabled to begin next sampling cycle. Signed-off-by: Brad Griffis <bgriffis@ti.com> [vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ti_am335x_tsc - interchange touchscreen and ADC stepsBrad Griffis2015-02-031-18/+24
| | | | | | | | | | | | | | | | | This patch makes the initial changes required to workaround TSC-false pen-up interrupts. It is required to implement these changes in order to remove udelay in the TSC interrupt handler and false pen-up events. The charge step is to be executed immediately after sampling X+. Hence TSC is made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate readouts, 4 wire TSC configuration) and ADC to use lower ones. Further X co-ordinate readouts must be the last to be sampled, thus co-ordinates are sampled in the order Y-Z-X. Signed-off-by: Brad Griffis <bgriffis@ti.com> [vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1] Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: MT - add support for balanced slot assignmentHenrik Rydberg2015-02-011-1/+1
| | | | | | | | | | | | | | | | | Some devices are not fast enough to differentiate between a fast-moving contact and a new contact. This problem cannot be fully resolved because information is truly missing, but it is possible to safe-guard against obvious mistakes by restricting movement with a maximum displacement. The new problem formulation for dmax > 0 cannot benefit from the speedup for positive definite matrices, but since the convergence is faster, the result is about the same. For a handful of contacts, the latency difference is truly negligible. Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: sun4i-ts - add support for touchpanel controller on A31Chen-Yu Tsai2015-01-271-13/+33
| | | | | | | | | | | | The Allwinner A31 SoC (sun6i) has the same resistive touchpanel controller as on other sunxi platforms. The only difference between the variants is the control bits for enabling operations are left-shifted by 1 on the A31. Also update the comment for the original temperature sensor with information from Allwinner. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: sun4i-ts - add thermal zone sensor supportChen-Yu Tsai2015-01-181-4/+50
| | | | | | | | | | | | | | | The touchscreen controller has a temperature sensor embedded in the SoC, which already has hwmon support in the driver. Add DT thermal zone support so we can use it with cpufreq for thermal throttling. This also adds a comment stating that we do not know the actual formula for calculating the temperature. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge tag 'v3.19-rc4' into nextDmitry Torokhov2015-01-1522-101/+33
|\ | | | | | | Merge with mainline to bring in the latest thermal and other changes.
| * Revert "Input: atmel_mxt_ts - use deep sleep mode when stopped"Linus Torvalds2014-12-311-73/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 9d469d033d135d80742a4e39e6bbb4519dd5eee1. It breaks the Chromebook Pixel touchpad (and touchscreen). Reported-by: Dirk Hohndel <dirk@hohndel.org> Bisected-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Dyer <nick.dyer@itdev.co.uk> Cc: Benson Leung <bleung@chromium.org> Cc: Yufeng Shen <miletus@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * Merge branch 'for-linus' of ↵Linus Torvalds2014-12-311-1/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
| | * Merge branch 'next' into for-linusDmitry Torokhov2014-12-181-1/+3
| | |\ | | | | | | | | | | | | Second round of input updates for 3.19.
| * | | Merge branch 'for-linus' of ↵Linus Torvalds2014-12-1723-78/+1731
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ...
| | * | Merge branch 'next' into for-linusDmitry Torokhov2014-12-1623-78/+1731
| | |\ \ | | | | | | | | | | | | | | | Prepare input updates for 3.19.
| * | \ \ Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-1517-17/+0
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| | * \ \ \ Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman2014-11-0417-17/+0
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
| | | * | | | input: touchscreen: drop owner assignment from platform_driversWolfram Sang2014-10-2017-17/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | | | | input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki2014-12-051-1/+1
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. The alternative of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME may be replaced with CONFIG_PM too. Make these changes in 2 files under drivers/input/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Ferruh Yigit <fery@cypress.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | | Merge branch 'for-linus' of ↵Linus Torvalds2014-11-011-2/+2
| |\ \ \ \ \ | | |/ / / / | |/| / / / | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
| | * | | Input: wm97xx - adapt parameters to tosa touchscreen.Dmitry Eremin-Solenikov2014-10-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | Merge branch 'for-linus' of ↵Linus Torvalds2014-10-193-0/+194
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
| * | | | input: edt-ft5x06: replace strnicmp with strncasecmpRasmus Villemoes2014-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds2014-10-091-7/+3
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
| | * | | | driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe2014-09-181-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 02:11:37 +0100